Change referenced MSR name to avoid later build failure.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Specify the firmware to use via the newer '-drive if=pflash' syntax
which allows specifying the raw format parameter. This
avoids warnings with newer version of QEMU.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
$ADD_QEMU_HDA was added because QEMU used to refuse to run without a
disk. Since newer versions run without any disks, remove it.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Enable multithreaded builds by default when building OvmfPkg
using build.sh.
This can drastically reduce build times. For example, on a
modern ThreadRipper system the time required to build decreases
from 3 minutes to 1 minute.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1781
GITHUB: https://github.com/idesai/edk2/tree/enable_sm3_measured_boot_v6
EDK2 Support for SM3 digest algorithm is needed to enable TPM with SM3 PCR
banks. This digest algorithm is part of the China Crypto algorithm suite.
This integration has dependency on the openssl_1_1_1b integration into
edk2.
This patch links SM3 support into Tcg2Pei and Tcg2Dxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Imran Desai <imran.desai@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190718225326.40839-5-imran.desai@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
This reverts commit a7c7d21ffa.
The reason is that said commit had not been reviewed by OvmfPkg
maintainers/reviewers, before it was pushed.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Imran Desai <imran.desai@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1781
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
(a) OvmfPkg first had to resolve the TpmMeasurementLib class -- for
SECURE_BOOT_ENABLE only -- when the DxeImageVerificationLib instance
became dependent on TpmMeasurementLib. For details, refer to commit
0d28d286bf ("OvmfPkg: resolve TpmMeasurementLib dependency
introduced in r14687", 2013-09-21).
(b) At the time, only one instance of TpmMeasurementLib existed, namely
DxeTpmMeasurementLib. This lib instance didn't do anything -- like it
was desirable for OVMF --, because OVMF didn't include any Tcg / TrEE
protocol implementations.
(c) In commit 308521b133 ("MdeModulePkg: Move TpmMeasurementLib
LibraryClass from SecurityPkg", 2015-07-01), TpmMeasurementLibNull was
introduced.
(d) In commit 285542ebbb ("OvmfPkg: Link AuthVariableLib for following
merged variable driver deploy", 2015-07-01), a TpmMeasurementLib
resolution became necessary regardless of SECURE_BOOT_ENABLE. And so
TpmMeasurementLib was resolved to TpmMeasurementLibNull in OVMF, but
only in the non-SECURE_BOOT_ENABLE case. This step -- possibly, the
larger series containing commit 285542ebbb -- missed an opportunity
for simplification: given (b), the DxeTpmMeasurementLib instance
should have been simply replaced with the TpmMeasurementLibNull
instance, regardless of SECURE_BOOT_ENABLE.
(e) In commit 1abfa4ce48 ("Add TPM2 support defined in trusted computing
group.", 2015-08-13), the TrEE dependency was replaced with a Tcg2
dependency in DxeTpmMeasurementLib.
(f) Starting with commit 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module",
2018-03-09), OVMF would include a Tcg2 protocol implementation,
thereby satisfying DxeTpmMeasurementLib's dependency. With
TPM2_ENABLE, it would actually make sense to consume
DxeTpmMeasurementLib -- however, DxeTpmMeasurementLib would never be
used without SECURE_BOOT_ENABLE.
Therefore, we have the following four scenarios:
- TPM2_ENABLE + SECURE_BOOT_ENABLE: works as expected.
- Neither enabled: works as expected.
- Only TPM2_ENABLE: this build is currently incorrect, because
Variable/RuntimeDxe consumes TpmMeasurementLib directly, but
TpmMeasureAndLogData() will never reach the TPM because we link
TpmMeasurementLibNull into the variable driver. This is a problem from
the larger series containing (f).
- Only SECURE_BOOT_ENABLE: this build works as expected, but it is
wasteful -- given that the protocol database will never contain Tcg2
without TPM2_ENABLE, we should simply use TpmMeasurementLibNull. This is
a problem from (d).
Resolving TpmMeasurementLib to DxeTpmMeasurementLib as a function of
*only* TPM2_ENABLE, we can fix / optimize the last two cases.
v2:
- Amend the title and description suggested by Laszlo
- Move TpmMeasurementLib to the existed TPM2_ENABLE block
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190704040731.5303-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1781
EDK2 Support for SM3 digest algorithm is needed to enable TPM with SM3 PCR
banks. This digest algorithm is part of the China Crypto algorithm suite.
This integration has dependency on the openssl_1_1_1b integration into
edk2.
This patch links SM3 support into Tcg2Pei and Tcg2Dxe.
Signed-off-by: Imran Desai <imran.desai@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: jiewen.yao@intel.com
Calling DisconnectController() on children isn't part of the job of
EFI_DRIVER_BINDING_PROTOCOL.Stop() as it only needs to deallocate
resources allocated in Start(). The disconnection will happen when
both DevicePath and XenBus protocols gets uninstalled.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190701111403.7007-1-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In XenBusDxe, the XenBusAddDevice() opens the gXenIoProtocolGuid on
behalf of child controllers. It is never closed and prevents us from
uninstalling the protocol.
Close it where we stop all the children in XenBusDxe->Stop().
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190701105012.25758-1-anthony.perard@citrix.com>
Mostly, this is only necessary for devices that the CSM might have
native support for, such as VirtIO and NVMe; PciBusDxe will already
degrade devices to 32-bit if they have an OpROM.
However, there doesn't seem to be a generic way of requesting PciBusDxe
to downgrade specific devices.
There's IncompatiblePciDeviceSupportProtocol but that doesn't provide
the PCI class information or a handle to the device itself, so there's
no simple way to just match on all NVMe devices, for example.
Just leave gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Size set to zero for
CSM builds, until/unless that can be fixed.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-5-dwmw2@infradead.org>
QemuVideoDxe installs its own legacy INT 10h handler for the benefit of
systems like Windows 2008r2 which attempt to use INT 10h even when booted
via EFI.
This interacts extremely badly with a CSM actually attempting to install
a real video BIOS.
The last thing done before invoking a legacy OpROM is to call INT 10h to
set a plain text mode. In the case where it's the video BIOS OpROM being
loaded, INT 10h will normally point to an iret stub in the CSM itself.
Unless QemuVideoDxe has changed INT10h to point to a location in the
0xC0000 segment that it didn't allocate properly, so the real OpROM has
been shadowed over them top of it, and the INT 10h vector now points to
some random place in the middle of the newly-shadowed OpROM.
Don't Do That Then. QemuVideoDxe doesn't do any acceleration and just
sets up a linear framebuffer, so we don't lose much by just
unconditionally using BiosVideoDxe instead when CSM is present.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-4-dwmw2@infradead.org>
Iterate over the available block devices in much the same way as
BdsLibEnumerateAllBootOption() does, but limiting to those devices
which are PCI-backed, which can be represented in the BbsTable.
One day we might need to extend the BbsTable to allow us to distinguish
between different NVMe namespaces on a device.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-3-dwmw2@infradead.org>
This is hard-coded in the IntThunk structure, and the additional entries
will be needed for other devices like VirtIO and NVMe disks. So admit
that they exist.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-2-dwmw2@infradead.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1843
Currently, the file GUID reference of the UEFI Shell app is indirected
via the PCD gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile,
which is set to a fixed value for OvmfPkg.
So instead, use the symbolic GUID in ShellPkg for this purpose, and drop
the reference to this PCD, and to the IntelFrameworkModulePkg package
entirely.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1843
This commit will update the INF file of the CsmSupportLib to drop its
dependency on IntelFrameworkPkg:
gEfiLegacyBiosPlatformProtocolGuid
gEfiLegacyBiosProtocolGuid
gEfiLegacyInterruptProtocolGuid
The above dependencies have already been addressed by the duplication of
these definitions from IntelFrameworkPkg to OvmfPkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1843
This commit will drop the driver's dependency on the IntelFrameworkPkg:
gEfiLegacyBiosProtocolGuid
Such dependency has already been addressed by the duplication of the above
definition from IntelFrameworkPkg into the OvmfPkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1843
For the driver's INF file, this commit will remove the redundant reference
to 'IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec'.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The DX register is supposed to contain the required alignment for the
allocation. It was zero, and SeaBIOS doesn't (well, didn't) cope well
with that. Set it appropriately.
Also set BX to indicate the regions it's OK to allocate in too. That
wasn't being initialised and was just using whatever the previous user
of the structure had left there.
Finally, actually return an error if the allocation fails. Instead of
going all the way through into the CSM and just letting it have a bogus
pointer to the E820 data.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit updates the OVMF DSC/FDF files to consume the copied CSM
components within OvmfPkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the library's INF file to:
A) Assign a new file GUID;
B) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of LegacyBootManagerLib in IntelFrameworkModulePkg with
the one copied in OvmfPkg within DSC files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the library's INF file to:
A) Assign a new file GUID;
B) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of LegacyBootMaintUiLib in IntelFrameworkModulePkg with
the one copied in OvmfPkg within DSC files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the driver's INF file to:
A) Assign a new file GUID;
B) Consume the PCDs duplicated in OvmfPkg DEC file;
C) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of LegacyBiosDxe in IntelFrameworkModulePkg with the one
copied in OvmfPkg within DSC/FDF files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the driver's INF file to:
A) Assign a new file GUID;
B) Consume the PCDs duplicated in OvmfPkg DEC file;
C) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of VideoDxe in IntelFrameworkModulePkg with the one copied
in OvmfPkg within DSC/FDF files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will add the PCD definitions consumed by the duplicated
drivers:
* VideoDxe
* LegacyBiosDxe
into the OvmfPkg DEC file.
Please note that, instead of adding these PCDs under section:
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
as in IntelFrameworkModulePkg.dec file, they are added in section:
[PcdsFixedAtBuild]
in OvmfPkg.dec instead.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
The previous file-duplication commit has put all the CSM related header
files within folder: OvmfPkg/Csm/Inclue.
This commit will update the DEC file to add that folder under the
'[Include]' section.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will add the Guid definitions of the duplicated CSM-related
Guids and Protocols from IntelFramework[Module]Pkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The following network build flags changed due to the inclusion of
NetworkPkg/Network.fdf.inc.
HTTP_BOOT_ENABLE -> NETWORK_HTTP_BOOT_ENABLE
TLS_ENABLE -> NETWORK_TLS_ENABLE
This commit also adds NETWORK_ALLOW_HTTP_CONNECTIONS to reflect the
change in OvmfPkg/OvmfPkg*.dsc.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1884
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190610065509.19573-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1842
According to the discussion at:
https://edk2.groups.io/g/devel/topic/30918343#38093
For OVMF, we keep both ISA stacks:
* The legacy one in PcAtChipsetPkg/IntelFrameworkModulePkg
* The Sio bus based OVMF-specified one introduced by commit a5cc178aeb
for a period of time (includes 1 stable tag: edk2-stable201905). And we
also keep the Sio bus based OVMF-specified stack as the default one (via a
build option 'USE_LEGACY_ISA_STACK') to validate its stability.
This commit will propose to drop the legacy ISA stack from OVMF and remove
the usage of the build flag 'USE_LEGACY_ISA_STACK' at the same time. This
is considered as a preparation for the removal of
PcAtChipsetPkg/IsaAcpiDxe & IntelFrameworkModulePkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Query the supported attributes firstly, then bitwise AND (&) both VGA_IO
and VGA_IO_16. Since the supported attributes should only have one of
VGA_IO or VGA_IO_16 set, the result of bitwise AND (&) is either VGA_IO
or IO_16. Then the result can be passed to PciIo->Attributes() to set the
attributes.
Device driver should consider both since the mReserveVgaAliases in
PciBusDxe driver is default FALSE(implies that device driver can only set
VGA_IO_16 to PCI_ROOT_BRIDGE), and Platform code may not return
EFI_RESERVE_VGA_IO_ALIAS in GetPlatformPolicy of PciPlatformProtocol to
make mReserveVgaAliases become TRUE(implies that device driver can only
set VGA_IO to PCI_ROOT_BRIDGE), Currently OvmfPkg doesn't have problem
due to it has hard code value for PCI_ROOT_BRIDGE's attributes field, so
an IO access by PciIoProtocol will be successed due to
RootBridgeIoCheckParameter of PciRootBridgeIo.c will always get pass
result for legacy IO access.
Usually the attributes field of PCI_ROOT_BRIDGE should be 0, in that case
it will have issue since the VGA_IO may not be able to be enabled, then
IO access by PciIoProtocol will be failed, hence the QemuVideoDxe driver
will not work fine.
Signed-off-by: Marc Chen <marc.w.chen@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1880
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190606074237.81492-1-marc.w.chen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
(This is a replacement for commit 39b9a5ffe6 ("OvmfPkg/PlatformPei: fix
MTRR for low-RAM sizes that have many bits clear", 2019-05-16).)
Reintroduce the same logic as seen in commit 39b9a5ffe6 for the pc
(i440fx) board type.
For q35, the same approach doesn't work any longer, given that (a) we'd
like to keep the PCIEXBAR in the platform DSC a fixed-at-build PCD, and
(b) QEMU expects the PCIEXBAR to reside at a lower address than the 32-bit
PCI MMIO aperture.
Therefore, introduce a helper function for determining the 32-bit
"uncacheable" (MMIO) area base address:
- On q35, this function behaves statically. Furthermore, the MTRR setup
exploits that the range [0xB000_0000, 0xFFFF_FFFF] can be marked UC with
just two variable MTRRs (one at 0xB000_0000 (size 256MB), another at
0xC000_0000 (size 1GB)).
- On pc (i440fx), the function behaves dynamically, implementing the same
logic as commit 39b9a5ffe6 did. The PciBase value is adjusted to the
value calculated, similarly to commit 39b9a5ffe6. A further
simplification is that we show that the UC32 area size truncation to a
whole power of two automatically guarantees a >=2GB base address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
(This is a replacement for commit 75136b2954, "OvmfPkg/PlatformPei:
reorder the 32-bit PCI window vs. the PCIEXBAR on q35", 2019-05-16).
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, place the PCIEXBAR at 2816MB (0xB000_0000), and
start the 32-bit PCI window at 3 GB (0xC000_0000). This shrinks the 32-bit
PCI window to
0xFC00_0000 - 0xC000_0000 = 0x3C00_0000 = 960 MB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 60e95bf509.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 9a2e8d7c65.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 75136b2954.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 39b9a5ffe6.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Assume that we boot OVMF in a QEMU guest with 1025 MB of RAM. The
following assertion will fire:
> ASSERT_EFI_ERROR (Status = Out of Resources)
> ASSERT OvmfPkg/PlatformPei/MemDetect.c(696): !EFI_ERROR (Status)
That's because the range [1025 MB, 4 GB) that we try to mark as
uncacheable with MTRRs has size 3071 MB:
0x1_0000_0000
-0x0_4010_0000
--------------
0x0_BFF0_0000
The integer that stands for the uncacheable area size has 11 (eleven) bits
set to 1. As a result, covering this size requires 11 variable MTRRs (each
MTRR must cover a naturally aligned, power-of-two sized area). But, if we
need more variable MTRRs than the CPU can muster (such as 8), then
MtrrSetMemoryAttribute() fails, and we refuse to continue booting (which
is justified, in itself).
Unfortunately, this is not difficult to trigger, and the error message is
well-hidden from end-users, in the OVMF debug log. The following
mitigation is inspired by SeaBIOS:
Truncate the uncacheable area size to a power-of-two, while keeping the
end fixed at 4 GB. Such an interval can be covered by just one variable
MTRR.
This may leave such an MMIO gap, between the end of low-RAM and the start
of the uncacheable area, that is marked as WB (through the MTRR default).
Raise the base of the 32-bit PCI MMIO aperture accordingly -- the gap will
not be used for anything.
On Q35, the minimal 32-bit PCI MMIO aperture (triggered by RAM size 2815
MB) shrinks from
0xE000_0000 - 0xAFF0_0000 = 769 MB
to
0xE000_0000 - 0xC000_0000 = 512 MB
On i440fx, the minimal 32-bit PCI MMIO aperture (triggered by RAM size
3583 MB) shrinks from
0xFC00_0000 - 0xDFF0_0000 = 449 MB
to
0xFC00_0000 - 0xE000_0000 = 448 MB
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, reorder the 32-bit PCI window against the PCIEXBAR,
as follows:
- start the 32-bit PCI window where it starts on i440fx as well, that is,
at 2GB or TopOfLowRam, whichever is higher;
- unlike on i440fx, where the 32-bit PCI window extends up to 0xFC00_0000,
stop it at 0xE000_0000 on q35,
- place the PCIEXBAR at 0xE000_0000.
(We cannot place the PCIEXBAR at 0xF000_0000 because the 256MB MMIO area
that starts there is not entirely free.)
Before this patch, the 32-bit PCI window used to only *end* at the same
spot (namely, 0xFC00_0000) between i440fx and q35; now it will only
*start* at the same spot (namely, 2GB or TopOfLowRam, whichever is higher)
between both boards.
On q35, the maximal window shrinks from
0xFC00_0000 - 0x9000_0000 = 0x6C00_0000 == 1728 MB
to
0xE000_0000 - 0x8000_0000 == 1536 MB.
We lose 192 MB of the aperture; however, the aperture is now aligned at
1GB, rather than 256 MB, and so it could fit a 1GB BAR even.
Regarding the minimal window (triggered by RAM size 2815MB), its size is
0xE000_0000 - 0xAFF0_0000 = 769 MB
which is not great, but probably better than a failed ASSERT.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
In the MemMapInitialization() function, we currently assign PciBase
different values, on both branches of the board type check. Hoist the
PciBase assignment from the i440fx branch in front of the "if". This is a
no-op for the i440fx branch. On the q35 branch, we overwrite this value,
hence the change is a no-op on q35 as well.
This is another refactoring for simplifying the rest of this series.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the MemMapInitialization() function, we currently have a common
PciSize assignment, shared between i440fx and q35. In order to simplify
the rest of this series, lift and duplicate the assignment identically to
both board-specific branches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch updates the platform DSC/FDF files to use the include fragment
files provided by NetworkPkg.
The feature enabling flags in [Defines] section have been updated to use
the NetworkPkg's terms, and the value has been overridden with the original
default value on this platform.
v2:1.Make the comments before Network definition align other parts.
2.Set NETWORK_ALLOW_HTTP_CONNECTIONS true.
3.Remove TcpIoLib in lib classes section.
4.Withdraw the removal of [PcdsFixedAtBuild.X64].
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190516081810.27840-2-shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore Bugzilla reference]
For QA test and development, we may need to test Secure Boot with a
devel key instead of UEFI CA.
This commit adds an argument, "--no-default", to EnrollDefaultKeys.efi.
With the argument, the key from SMBIOS Type 11 will also be enrolled
into db. Besides, the keys in AuthData.c, i.e. Microsoft KEK CA,
Microsoft PCA, and Microsoft UEFI CA will be excluded, so the developer
can easily create a varstore template for a specific key.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190516030834.12203-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NetLib,IpIoLib,UdpIoLib and DpcLib already exist in [LibraryClasses].
So the ones in [LibraryClasses.common.DXE_DRIVER] are duplicated,
which should be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190515072419.23792-1-shenglei.zhang@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore BZ reference]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Update the QemuVideoDxe driver to not depend on the
OptionRomPkg to support moving OptionRomPkg to the
edk2-platforms repository.
The only dependency on the OptionRomPkg is the use of
PcdDriverSupportedEfiVersion to set the version value in the
EFI Driver Supported EFI Version Protocol.
Quoting the UEFI-2.8 spec, "This protocol is required for EFI
drivers that are *on* PCI and other plug in cards" (emphasis ours).
However, QemuVideoDxe is always part of the OVMF platform firmware,
and is never read by PciBusDxe from the PCI ROM BAR of QEMU's
emulated graphics cards.
Since this protocol does not apply to QEMU environment, remove
both the PCD and the installation of the EFI Driver Supported EFI
Version Protocol.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When building OvmfPkg/EnrollDefaultKeys for IA32 with gcc-4.8 for the
DEBUG target (and possibly under other build configurations too), the
compiler incorrectly reports,
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c: In function
> 'ShellAppMain':
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c:631:10: error:
> 'SizeOfPkKek1' may be used uninitialized in this function
> [-Werror=maybe-uninitialized]
> Status = EnrollListOfCerts (
> ^
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c:703:12: error: 'PkKek1'
> may be used uninitialized in this function [-Werror=maybe-uninitialized]
> FreePool (PkKek1);
> ^
> cc1: all warnings being treated as errors
Suppress this warning, in the style suggested under
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: be9470b3c9
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
On Xen, hvmloader firmware leaves address decoding enabled for
enumerated PCI device before jumping into OVMF. OVMF seems to
expect it to be disabled and tries to size PCI BARs in several places
without disabling it which causes BAR64, for example, being
incorrectly placed by QEMU.
Fix it by disabling PCI address decoding explicitly before the
first attempt to size BARs on Xen.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In case BAR64 is placed below 4G choose the correct aperture.
This fixes a failed assertion down the code path.
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
This aperture doesn't exist in QEMU-XEN and hvmloader places BARs
in arbitrary order disregarding prefetchable bit. This makes
prefetchable and non-prefetchable BARs to follow each other that's
quite likely with PCI passthrough devices. In that case, the existing
code, that tries to work out aperture boundaries by reading hvmloader
BAR placement, will report a bogus prefetchable aperture which overlaps
with the regular one. It will eventually trigger an assertion in
DXE PCI initialization code.
Do the same thing as OVMF on QEMU-KVM and pass a non-existing aperture
there. It's not necessary to pass additional allocation flags as we set
ResourceAssigned flag on the root bridge which means they will be ignored.
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Disconnect the certificate that is enrolled as both Platform Key and first
Key Exchange Key from Red Hat: expect the hypervisor to specify it, as
part of SMBIOS.
Example usage with QEMU:
* Generate self-signed X509 certificate:
openssl req \
-x509 \
-newkey rsa:2048 \
-outform PEM \
-keyout PkKek1.private.key \
-out PkKek1.pem
(where "PEM" simply means "DER + base64 + header + footer").
* Strip the header, footer, and newline characters; prepend the
application prefix:
sed \
-e 's/^-----BEGIN CERTIFICATE-----$/4e32566d-8e9e-4f52-81d3-5bb9715f9727:/' \
-e '/^-----END CERTIFICATE-----$/d' \
PkKek1.pem \
| tr -d '\n' \
> PkKek1.oemstr
* Pass the certificate to EnrollDefaultKeys with the following QEMU
option:
-smbios type=11,value="$(< PkKek1.oemstr)"
(Note: for the above option to work correctly, a QEMU version is needed
that includes commit 950c4e6c94b1 ("opts: don't silently truncate long
option values", 2018-05-09). The first upstream release with that commit
was v3.0.0.
Once <https://bugs.launchpad.net/qemu/+bug/1826200> is fixed, QEMU will
learn to read the file directly; passing the blob on the command will be
necessary no more.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
For the EnrollDefaultKeys application, the hypervisor is expected to add a
string entry to the "OEM Strings" (Type 11) SMBIOS table, with the
following format:
4e32566d-8e9e-4f52-81d3-5bb9715f9727:<Base64 X509 cert for PK and first KEK>
The string representation of the GUID at the front is the "application
prefix", in terms of QEMU commit
<https://git.qemu.org/?p=qemu.git;a=commit;h=2d6dcbf93fb0>.
Introduce this GUID in the usual manner.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
The entry point function of EnrollDefaultKeys finishes with a sanity
check, verifying the values of the Secure Boot-related "control"
variables. Add a diagram to explain why we expect the values we do.
While at it, write comments on the rest of the entry point function.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
The GetExact(), GetSettings(), PrintSettings(), and ShellAppMain()
functions lack leading comment blocks. Supply those.
While at it, make sure that every such comment block is preceded by two
blank lines.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
The GUID
77FA9ABD-0359-4D32-BD60-28F4E78F784B
is specified in MSDN, at
<https://msdn.microsoft.com/en-us/ie/dn932805(v=vs.94)>, therefore it
deserves an entry in the package DEC file, and a header file under
"Include/Guid".
(Arguably, this GUID declaration / definition could even live under
SecurityPkg, but the edk2 tradition has been to hoist GUIDs,
protocols/PPIs, and lib classes from OvmfPkg to a core package only when
dependent C code is added to the core package.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
A large portion of "EnrollDefaultKeys.c" is hex-encoded X509 certificates,
GUIDs, and signatures. These objects are constants, unlikely to see
changes anytime soon. Move them out of the way, to "AuthData.c", so we can
more easily work on functions in "EnrollDefaultKeys.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
"EnrollDefaultKeys.c" defines three structure types: SINGLE_HEADER,
REPEATING_HEADER, and SETTINGS. The definitions are scattered over the C
file, and lack high-level summary comments.
Extract the structures to "EnrollDefaultKeys.h", and add the missing
comments.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
The GetExact(), GetSettings(), PrintSettings() functions are only called
from within "EnrollDefaultKeys.c", and none of them take variable
arguments. Drop their EFIAPI calling convention specifiers.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
According to the edk2 coding standards, "[w]hen all letters in an acronym
are capitalized, it makes the prior and subsequent words visually
difficult to distinguish".
Fix the spellings of three acronyms, accordingly:
- "KEK" (Key Exchange Key) should be written as "Kek", in "mMicrosoftKEK",
- "CA" (Certificate Authority) should be written as "Ca", in
"mMicrosoftUefiCA",
- "PCA" (Production Certificate Authority) should be written as "Pca", in
"mMicrosoftPCA".
Generate the changes with:
sed --regexp-extended --in-place \
--expression='s,\<mMicrosoftKEK\>,mMicrosoftKek,g' \
--expression='s,\<mMicrosoftUefiCA\>,mMicrosoftUefiCa,g' \
--expression='s,\<mMicrosoftPCA\>,mMicrosoftPca,g' \
OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
In edk2, we should start the names of module-global variables with "m".
Rename the "RedHatPkKek1", "MicrosoftKEK", "MicrosoftPCA",
"MicrosoftUefiCA" variables accordingly, with the following command:
sed --regexp-extended --in-place \
--expression='s,\<(RedHatPkKek1|Microsoft(KEK|PCA|UefiCA))\>,m\1,g' \
OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
In edk2, we should spell "#pragma pack(...)" with a space character in
front of the opening parenthesis. Fix up locations that suggest otherwise.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Bump INF_VERSION to the latest edk2 INF specification.
Regenerate FILE_GUID to distinguish this application from downstream-only
versions.
Remove the VALID_ARCHITECTURES comment as there is nothing ISA or platform
specific in the application.
Ensure all sections apart from [Defines] are alphabetically sorted.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Refresh the sentence that states the purpose of the application.
Extend the copyright notice to the year 2019.
Replace the 2-clause BSD License banner with the BSD-2-Clause-Patent SPDX
ID.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Add the OvmfPkg/EnrollDefaultKeys shell application source as it is at the
"edk2-20190308git89910a39dcfd-2.el8" tag in RHEL8's downstream "edk2"
package.
Further patches in this series will replace Red Hat-specific bits in the
application, with a conduit to pass in parameters directly from the host
side, on both QEMU and Xen.
(Note: at the moment, Xen doesn't support Secure Boot, due to lacking a
standards-conformant variable driver stack. However, that could change
soon
<https://fosdem.org/2019/schedule/event/vai_implementing_uefi_variable_services_in_qemu/>,
and then this facility will become useful on Xen too.)
The use case for this application (including why it is only being added to
the DSC files) is explained in detail in
<https://bugzilla.tianocore.org/show_bug.cgi?id=1747#c0>.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The real mode interrupt vector table, which we modify for the sake of
Windows 7, starts at address 0, which happens to be the representation of
null pointers on all edk2 architectures. A null pointer may never undergo
pointer arithmetic, and RH covscan justifiedly reports:
> Error: CPPCHECK_WARNING (CWE-682):
> edk2-89910a39dcfd/OvmfPkg/QemuVideoDxe/VbeShim.c:105:
> error[nullPointerArithmetic]: Pointer addition with NULL pointer.
> # 103| //
> # 104| Segment0Pages = 1;
> # 105|-> Int0x10 = (IVT_ENTRY *)(UINTN)Segment0 + 0x10;
> # 106| Segment0AllocationStatus = gBS->AllocatePages (
> # 107| AllocateAddress,
Fix this by calculating the EFI_PHYSICAL_ADDRESS of IVT entry 0x10 first,
and by casting the address to the right type second.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1002.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The "XenBus.c", "XenStore.c", "XenStore.h" files under "OvmfPkg/XenBusDxe"
include the MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).
This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
The header files under "OvmfPkg/Include/IndustryStandard/Xen" include the
MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).
This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Refresh the MIT license text from <https://spdx.org/licenses/MIT.html>,
and add "SPDX-License-Identifier: MIT" for easier parsing by machines.
This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>; in particular:
- commit 304bff7223 ("edk2: Change License.txt from 2-Clause BSD to
BSD+Patent", 2019-04-09),
- commit 75fae505b7 ("OvmfPkg: Change License.txt from 2-Clause BSD to
BSD+Patent", 2019-04-09).
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit updates the OVMF DSC/FDF files to consume the copied
8259InterruptControllerDxe and 8254TimerDxe drivers within OvmfPkg.
The unconsumed PCD:
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel
is removed from DSC files as well.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit will remove the IntelFrameworkPkg DEC file dependency in the
driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8254TimerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8254TimerDxe driver in OVMF
DSC/FDF files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit copies the exact 8254TimerDxe driver from PcAtChipsetPkg to
OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
Several updates have been made to the OvmfPkg/AcpiPlatformDxe driver to
drop its dependency on PcAtChipsetPkg:
A) Consumes the PCD 'Pcd8259LegacyModeEdgeLevel' defined within OvmfPkg;
B) Remove the PcAtChipsetPkg DEC file dependency in the driver INF file.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
Several updates have been made to the
OvmfPkg/8259InterruptControllerDxe driver to make it build under OvmfPkg:
A) Update the driver INF file to consume PCDs defined within OvmfPkg;
B) Remove the unnecessary dependency on the IntelFrameworkPkg header file
'FrameworkDxe.h';
C) Remove the IntelFrameworkPkg & PcAtChipsetPkg DEC files dependency in
the driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8259InterruptControllerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8259InterruptControllerDxe
driver in OVMF DSC/FDF files;
C) Remove the consumption of
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel in OVMF DSC
files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
According to the DEC file in PcAtChipsetPkg, this commit adds the two
8259-driver-related PCDs into the OvmfPkg DEC file.
Please note that, instead of adding the two PCDs under section:
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
as in PcAtChipsetPkg.dec file, they are added in section:
[PcdsFixedAtBuild]
in OvmfPkg.dec instead.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit copies the exact Legacy8259 protocol header file from
IntelFrameworkPkg to OvmfPkg. Also, the protocol GUID definition is
duplicated in the OvmfPkg DEC file.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit copies the exact 8259InterruptControllerDxe driver from
PcAtChipsetPkg to OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
This commit will add a static build flag 'USE_LEGACY_ISA_STACK' to select
the ISA driver stack.
If the flag is set to TRUE, the below driver stack will be used:
PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
If the flag is set to FALSE, the below driver stack will be used:
OvmfPkg/SioBusDxe/SioBusDxe.inf
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KeyboardDxe.inf
The default value is set to FALSE in OVMF DSC files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
There is a plan to remove the IntelFrameworkModulePkg:
https://bugzilla.tianocore.org/show_bug.cgi?id=1605
This patch will a new OVMF Super I/O bus driver which will create the
below child devices:
* COM 1 UART
* COM 2 UART
* PS/2 Keyboard
and installs the Super I/O Protocol on them.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
There is a plan to remove the IntelFrameworkModulePkg:
https://bugzilla.tianocore.org/show_bug.cgi?id=1605
And for driver:
IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe
This patch proposes to drop the ISA Floppy device support in OVMF.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1653
"create-release.py" generates a 2-BSDL copyright block that will no longer
apply once we fix <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.
Rather than update "create-release.py", remove it. We haven't used it in
several years now, plus source releases of upstream edk2 are now covered
by the edk2 stable tags
<https://github.com/tianocore/tianocore.github.io/wiki/EDK-II#stable-tags>.
Regarding binary releases of upstream OVMF: OVMF and ArmVirtQemu binaries
built at the edk2 stable tags are being bundled with upstream QEMU,
similarly to other firmware that runs on QEMU platforms:
<https://lists.gnu.org/archive/html/qemu-devel/2019-03/msg06148.html>.
Furthermore, the Xen project has provided its own builds of OVMF and
ArmVirtXen for a good while now.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Consume PlatformBmPrintScLib, added earlier in this series. When
BdsDxe+UefiBootManagerLib report LoadImage() / StartImage() preparations
and return statuses, print the reports to the UEFI console. This allows
end-users better visibility into the boot process.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.
In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().
This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The check for 1.[1-9][0-9].* was removed since qemu jumped to 2.0
after 1.7.
Changed 2.*.* to [2-9].*.* to match major releases 3 - 9.
Added [1-9][0-9]*.*.* to match major releses >= 10.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various OvmfPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
We're about to remove BaseTools support for GCC44..GCC47. Reject those gcc
versions cleanly in "OvmfPkg/build.sh". In "OvmfPkg/README", upgrade any
mentions of the same gcc versions to GCC48.
No GCC44..GCC47 references remain under OvmfPkg after this patch.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
The codes have been updated to not use PcdPeiCoreMaxFvSupported,
PcdPeiCoreMaxPeimPerFv and PcdPeiCoreMaxPpiSupported, so their
statement in platform DSC could be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=1355
XCODE doesn't support HII resource section. TftpDynamicCommand driver depends
on HII resource section. To let OvmfPkg boot to shell on XCODE5 tool chain,
don't include TftpDynamicCommand driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BAR | std vga | vmsvga
---------------------------------
0 | Framebuffer | I/O space
1 | Reserved | Framebuffer
2 | MMIO | FIFO
- We cannot recognize VMW SVGA as BOCHS because that would confuse the
IsQxl setting in QemuVideoControllerDriverStart(),
- We cannot recognize VMW SVGA as BOCHS_MMIO because BAR2 on VMW SVGA is
not the BOCHS MMIO BAR (we can only use port IO).
Therefore the list of reasons for which we should introduce
QEMU_VIDEO_VMWARE_SVGA should name three reasons:
(1) Get framebuffer from correct PCI BAR
(2) Prevent using BAR2 for MMIO
(3) Prevent mis-recognizing VMW SVGA as QXL
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 438ada5aa5)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 98856a724c)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit e038bde267)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Remove EdkShellBinPkg in OvmfPkgIa32.fdf,
OvmfPkg/OvmfPkgIa32X64.fdf amd OvmfPkg/OvmfPkgX64.fdf.
https://bugzilla.tianocore.org/show_bug.cgi?id=1108
v2: Remove USE_OLD_SHELL in DSC and FDF because it will be
unnecessary to use it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit e038bde267, reapplying
b2959e9f1a.
Note that the commit now being reverted is technically correct; the only
reason we're reverting it is because it should not have been pushed past
the Soft Feature Freeze for the edk2-stable201811 tag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: yuchenlin <yuchenlin@synology.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1319
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: yuchenlin <yuchenlin@synology.com>
This reverts commit 98856a724c, reapplying
c137d95081.
Note that the commit now being reverted is technically correct; the only
reason we're reverting it is because it should not have been pushed past
the Soft Feature Freeze for the edk2-stable201811 tag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: yuchenlin <yuchenlin@synology.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1319
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: yuchenlin <yuchenlin@synology.com>
This reverts commit 438ada5aa5,
reapplying 05a5379458.
Note that the commit now being reverted is technically correct; the only
reason we're reverting it is because it should not have been pushed past
the Soft Feature Freeze for the edk2-stable201811 tag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: yuchenlin <yuchenlin@synology.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1319
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: yuchenlin <yuchenlin@synology.com>
This reverts commit 328409ce8d, reapplying
9bcca53fe4.
Note that the commit now being reverted is technically correct; the only
reason we're reverting it is because it should not have been pushed past
the Soft Feature Freeze for the edk2-stable201811 tag.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: yuchenlin <yuchenlin@synology.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1319
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: yuchenlin <yuchenlin@synology.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
V2:
Add missed library instance for NetworkPkg iSCSI driver.
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is for conformance with the TCG "Platform Reset Attack Mitigation
Specification". Because clearing the CPU caches at boot doesn't impact
performance significantly, do it unconditionally, for simplicity's
sake.
Flush the cache on all logical processors, thanks to
EFI_PEI_MP_SERVICES_PPI and CacheMaintenanceLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: remove bogus Message-Id line from commit msg]
Sha384 and Sha512 were added to HashInstanceLib recently. To make them
available in Tcg2Pei and Tcg2Dxe, we have to link both libraries.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
The DXE Core is one of those modules that call
ProcessLibraryConstructorList() manually.
Before DxeMain() [MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c] calls
ProcessLibraryConstructorList(), and through it, our
PlatformDebugLibIoPortConstructor() function, DxeMain() invokes the
DEBUG() macro multiple times. That macro lands in our
PlatformDebugLibIoPortFound() function -- which currently relies on the
"mDebugIoPortFound" global variable that has (not yet) been set by the
constructor. As a result, early debug messages from the DXE Core are lost.
Move the device detection into PlatformDebugLibIoPortFound(), also caching
the fact (not just the result) of the device detection.
(We could introduce a separate DebugLib instance just for the DXE Core,
but the above approach works for all modules that currently consume the
PlatformDebugLibIoPort instance (which means "everything but SEC").)
This restores messages such as:
> CoreInitializeMemoryServices:
> BaseAddress - 0x7AF21000 Length - 0x3CDE000 MinimalMemorySizeNeeded - 0x10F4000
Keep the empty constructor function -- OVMF's DebugLib instances have
always had constructors; we had better not upset constructor dependency
ordering by making our instance(s) constructor-less.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: c09d957130
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: sanitize blank lines around "mDebugIoPortChecked"]
ResourcePublicationLib class name is ResourcePublicationLib.
INF and DSC files are updated to use the correct one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dongao Guo <dongao.guo@intel.com>
[lersek@redhat.com: insert empty line between commit msg body and tags]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
XenPvBlkDxe doesn't reference gEfiDevicePathProtocolGuid; remove it from
the INF file.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1034
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
None of the source files referenced by "AcpiPlatformDxe.inf" #include
"MdePkg/Include/Library/DxeServicesLib.h" or use interfaces declared
therein, so drop DxeServicesLib from [LibraryClasses].
"AcpiPlatformDxe.inf" references "AcpiPlatform.c", which installs ACPI
tables built into the firmware image from under "OvmfPkg/AcpiTables/", in
case dynamically generated ACPI tables are not available from Xen or QEMU.
For this, the driver consumes gEfiFirmwareVolume2ProtocolGuid. Account for
that in [Protocols].
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reported-by: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1014
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the SMM build, only an SMM driver is using the address range hence we
do not need to expose the flash MMIO range in EFI runtime mapping.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The flash memory range is an IO address and should be presented as Memory
Mapped IO in EFI Runtime mapping. This information can be used by OS
when mapping the flash memory range.
It is especially helpful in SEV guest case, in which IO addresses should
be mapped as unencrypted. If memory region is not marked as MMIO then OS
maps the range as encrypted.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Justen Jordan L <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add QemuRamfbDxe device path to the list of platform console devices,
so ConSplitter will pick up the device even though it isn't a PCI GPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Consumers of status code reports may rely on a status code to be
reported when the ReadyToBoot event is signalled. For instance,
FirmwarePerformanceDxe will fail to install the FPDT ACPI table
in this case. So add the missing call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Almost exactly two years after commit 2f7b34b208, we've grown out the
10MB DXEFV:
> build -a IA32 -a X64 -p OvmfPkg/OvmfPkgIa32X64.dsc -b NOOPT -t GCC48 \
> -D SMM_REQUIRE -D SECURE_BOOT_ENABLE -D TLS_ENABLE -D E1000_ENABLE \
> -D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE
>
> [...]
>
> GenFv: ERROR 3000: Invalid
> the required fv image size 0xa28d48 exceeds the set fv image size
> 0xa00000
Raise the DXEFV size to 11MB.
(For builds that don't need this DXEFV bump, I've checked the
FVMAIN_COMPACT increase stemming from the additional 1MB padding, using
NOOPT + GCC48 + FD_SIZE_2MB, and no other "-D" flags. In the IA32 build,
FVMAIN_COMPACT grows by 232 bytes. In the IA32X64 build, FVMAIN_COMPACT
shrinks by 64 bytes. In the X64 build, FVMAIN_COMPACT shrinks by 376
bytes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Replace the manual capability list parsing in OvmfPkg/Virtio10Dxe with
PciCapLib and PciCapPciIoLib API calls.
The VIRTIO_PCI_CAP_LINK structure type is now superfluous. (Well, it
always has been; we should have used EFI_PCI_CAPABILITY_HDR.)
Also, EFI_PCI_CAPABILITY_VENDOR_HDR is now included at the front of
VIRTIO_PCI_CAP. No driver other than Virtio10Dxe relies on VIRTIO_PCI_CAP.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Replace the manual capability list parsing in OvmfPkg/PciHotPlugInitDxe
with PciCapLib and PciCapPciSegmentLib API calls.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Resolve the PciCapLib, PciCapPciSegmentLib, and PciCapPciIoLib classes to
their single respective instances. Later patches will use these lib
classes in OvmfPkg drivers.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a UEFI_DRIVER lib instance, that are layered on
top of PciCapLib, and allow clients to plug an EFI_PCI_IO_PROTOCOL backend
into PciCapLib, for config space access.
(Side note:
Although the UEFI spec says that EFI_PCI_IO_PROTOCOL_CONFIG() returns
EFI_UNSUPPORTED if "[t]he address range specified by Offset, Width, and
Count is not valid for the PCI configuration header of the PCI
controller", this patch doesn't directly document the EFI_UNSUPPORTED
error code, for ProtoDevTransferConfig() and its callers
ProtoDevReadConfig() and ProtoDevWriteConfig(). Instead, the patch refers
to "unspecified error codes". The reason is that in edk2, the
PciIoConfigRead() and PciIoConfigWrite() functions [1] can also return
EFI_INVALID_PARAMETER for the above situation.
Namely, PciIoConfigRead() and PciIoConfigWrite() first call
PciIoVerifyConfigAccess(), which indeed produces the standard
EFI_UNSUPPORTED error code, if the device's config space is exceeded.
However, if PciIoVerifyConfigAccess() passes, and we reach
RootBridgeIoPciRead() and RootBridgeIoPciWrite() [2], then
RootBridgeIoCheckParameter() can still fail, e.g. if the root bridge
doesn't support extended config space (see commit 014b472053).
For all kinds of Limit violations in IO, MMIO, and config space,
RootBridgeIoCheckParameter() returns EFI_INVALID_PARAMETER, not
EFI_UNSUPPORTED. That error code is then propagated up to, and out of,
PciIoConfigRead() and PciIoConfigWrite().
[1] MdeModulePkg/Bus/Pci/PciBusDxe/PciIo.c
[2] MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, that are layered on top of
PciCapLib, and allow clients to plug a PciSegmentLib backend into
PciCapLib, for config space access.
(Side note:
The "MaxDomain" parameter is provided because, in practice, platforms
exist where a PCI Express device may show up on a root bridge such that
the root bridge doesn't support access to extended config space. Earlier
the same issue was handled for MdeModulePkg/PciHostBridgeDxe in commit
014b472053. However, that solution does not apply to the PciSegmentLib
class, because:
(1) The config space accessor functions of the PciSegmentLib class, such
as PciSegmentReadBuffer(), have no way of informing the caller whether
access to extended config space actually succeeds.
(For example, in the UefiPciSegmentLibPciRootBridgeIo instace, which
could in theory benefit from commit 014b472053, the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() status code is explicitly
ignored, because there's no way for the lib instance to propagate it
to the PciSegmentLib caller. If the
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Pci.Read() call fails, then
DxePciSegmentLibPciRootBridgeIoReadWorker() returns Data with
indeterminate value.)
(2) There is no *general* way for any firmware platform to provide, or
use, a PciSegmentLib instance in which access to extended config space
always succeeds.
In brief, on a platform where config space may be limited to 256 bytes,
access to extended config space through PciSegmentLib may invoke undefined
behavior; therefore PciCapPciSegmentLib must give platforms a way to
prevent such access.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a library class, and a BASE lib instance, to work more easily with PCI
capabilities in PCI config space. Functions are provided to parse
capabilities lists, and to locate, describe, read and write capabilities.
PCI config space access is abstracted away.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Call Tcg2PhysicalPresenceLibProcessRequest() to process pending PPI
requests from PlatformBootManagerAfterConsole().
Laszlo understanding of edk2 is that the PPI operation processing was
meant to occur *entirely* before End-Of-Dxe, so that 3rd party UEFI
drivers couldn't interfere with PPI opcode processing *at all*.
He suggested that we should *not* call
Tcg2PhysicalPresenceLibProcessRequest() from BeforeConsole(). Because,
an "auth" console, i.e. one that does not depend on a 3rd party
driver, is *in general* impossible to guarantee. Instead we could opt
to trust 3rd party drivers, and use the "normal" console(s) in
AfterConsole(), in order to let the user confirm the PPI requests. It
will depend on the user to enable Secure Boot, so that the
trustworthiness of those 3rd party drivers is ensured. If an attacker
roots the guest OS from within, queues some TPM2 PPI requests, and
also modifies drivers on the EFI system partition and/or in GPU option
ROMs (?), then those drivers will not load after guest reboot, and
thus the dependent console(s) won't be used for confirming the PPI
requests.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cloned "SecurityPkg/Library/DxeTcg2PhysicalPresenceLib" and:
- removed all the functions that are unreachable from
Tcg2PhysicalPresenceLibProcessRequest() [called from platform BDS],
or SubmitRequestToPreOSFunction() and
ReturnOperationResponseToOsFunction() [called from Tcg2Dxe].
- replaced everything that's related to the
TCG2_PHYSICAL_PRESENCE*_VARIABLE variables, with direct access to
the QEMU structures.
This commit is based on initial experimental work from Stefan Berger.
In particular, he wrote most of QEMU PPI support, and designed the
qemu/firmware interaction. Initially, Stefan tried to reuse the
existing SecurityPkg code, but we eventually decided to get rid of the
variables and simplify the ovmf/qemu version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: clean up non-idiomatic coding style]
[lersek@redhat.com: null mPpi on invalid PPI address]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add some common macros and type definitions corresponding to the QEMU
TPM interface.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This NULL library will let us call
Tcg2PhysicalPresenceLibProcessRequest() unconditionally from
BdsPlatform when building without TPM2_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[lersek@redhat.com: replace MdeModulePkg.dec w/ MdePkg.dec]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Virtio RNG devices are never boot devices, so in commit 245c643cc8 we
stopped connecting them. This is a problem because an OS boot loader may
depend on EFI_RNG_PROTOCOL to seed the OS's RNG.
Connect Virtio RNG devices again. And, while commit 245c643cc8 removed
that from PlatformBootManagerAfterConsole(), reintroduce it now to
PlatformBootManagerBeforeConsole() -- this way Driver#### options launched
between both functions may access EFI_RNG_PROTOCOL too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1579518
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Then check for PCI_CLASS_DISPLAY_VGA using the new field.
This allows to enable/disable non-vga display classes per
card entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
If both ConIn and ConOut exist, but ConIn references none of the PS/2
keyboard, the USB wild-card keyboard, and any serial ports, then
PlatformInitializeConsole() currently allows the boot to proceed without
any input devices at all. This makes for a bad user experience -- the
firmware menu could only be entered through OsIndications, set by a guest
OS.
Do what ArmVirtQemu does already, namely connect the consoles, and add
them to ConIn / ConOut / ErrOut, unconditionally. (The underlying
EfiBootManagerUpdateConsoleVariable() function checks for duplicates.)
The issue used to be masked by the EfiBootManagerConnectAll() call that
got conditionalized in commit 245c643cc8.
This patch is best viewed with "git show -b -W".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 245c643cc8
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1577546
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Guests do the same, because the framebuffer is mapped somewhere, which
obviously works with page granularity only.
When not rounding up to full page size we get messages like this one
(linux kernel):
efifb: framebuffer at 0x80000000, using 1876k, total 1875k
^^^^^ ^^^^^
Also sysfb is confused and throws an error:
sysfb: VRAM smaller than advertised
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: fix coding style]
Add the new section for HTTPS Boot.
Changes in v2:
- Fixed the typos
- Added the command for p11-kit based on Laszlo's suggestion
- Also added the efisiglist command
- Elaborated how to create the customized cipher suite list
- Mentioned the changes in QEMU in the future based on Laszlo's
suggestion
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: trivial typo fixes; update-crypto-policies URL fix]
PlatformInitializeConsole() (called by PlatformBootManagerBeforeConsole())
adds elements of "gPlatformConsole" to ConIn / ConOut / ErrOut (as
requested per element) if at boot at least one of ConIn and ConOut doesn't
exist. This typically applies to new VMs, and VMs with freshly recreated
varstores.
Add a USB keyboard wildcard to ConIn via "gPlatformConsole", so that we
not only bind the PS/2 keyboard. (The PS/2 keyboard is added in
PrepareLpcBridgeDevicePath()). Explicitly connecting the USB keyboard is
necessary after commit 245c643cc8.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Read the list of trusted cipher suites from fw_cfg and to store it to
EDKII_HTTP_TLS_CIPHER_LIST_VARIABLE.
The fw_cfg file will be formatted by the "update-crypto-policies" utility
on the host side, so that the host settings take effect in guest HTTPS
boot as well. QEMU forwards the file intact to the firmware. The contents
are forwarded by NetworkPkg/HttpDxe (in TlsConfigCipherList()) to
NetworkPkg/TlsDxe (TlsSetSessionData()) and TlsLib (TlsSetCipherList()).
Note: the development of the "update-crypto-policies" feature is underway
at this time. Meanwhile the following script can be used to generate the
binary file for fw_cfg:
export LC_ALL=C
openssl ciphers -V \
| sed -r -n \
-e 's/^ *0x([0-9A-F]{2}),0x([0-9A-F]{2}) - .*$/\\\\x\1 \\\\x\2/p' \
| xargs -r -- printf -- '%b' > ciphers.bin
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
[lersek@redhat.com: update commit msg and add script as requested by Gary]
[lersek@redhat.com: update commit msg as requested by Jiaxin]
BLOCK_MMIO_PROTOCOL and BlockMmioToBlockIoDxe were introduced to OvmfPkg
in March 2010, in adjacent commits b0f5144676 and efd82c5794. In the
past eight years, no driver or application seems to have materialized that
produced BLOCK_MMIO_PROTOCOL instances. Meanwhile the UEFI spec has
developed the EFI_RAM_DISK_PROTOCOL, which edk2 implements (and OVMF
includes) as RamDiskDxe.
Rather than fixing issues in the unused BlockMmioToBlockIoDxe driver,
remove the driver, together with the BLOCK_MMIO_PROTOCOL definition that
now becomes unused too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=926
Reported-by: Steven Shi <steven.shi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Introduce TlsAuthConfigLib to read the list of trusted CA certificates
from fw_cfg and to store it to EFI_TLS_CA_CERTIFICATE_VARIABLE.
The fw_cfg file is formatted by the "p11-kit" and "update-ca-trust"
utilities on the host side, so that the host settings take effect in guest
HTTPS boot as well. QEMU forwards the file intact to the firmware. The
contents are sanity-checked by NetworkPkg/HttpDxe code that was added in
commit 0fd13678a6.
Link TlsAuthConfigLib via NULL resolution into TlsAuthConfigDxe. This sets
EFI_TLS_CA_CERTIFICATE_VARIABLE in time for both
NetworkPkg/TlsAuthConfigDxe (for possible HII interaction with the user)
and for NetworkPkg/HttpDxe (for the effective TLS configuration).
The file formatted by "p11-kit" can be large. On a RHEL-7 host, the the
Mozilla CA root certificate bundle -- installed with the "ca-certificates"
package -- is processed into a 182KB file. Thus, create
EFI_TLS_CA_CERTIFICATE_VARIABLE as a volatile & boot-time only variable.
Also, in TLS_ENABLE builds, set the cumulative limit for volatile
variables (PcdVariableStoreSize) to 512KB, and the individual limit for
the same (PcdMaxVolatileVariableSize) to 256KB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
As a continuation of the last patch, clarify in the DSC files that we set
PcdVariableStoreSize to the same value as PcdFlashNvStorageVariableSize
just for convenience; the equality is not a technical requirement.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In commit 62f43f7c19, we set PcdVariableStoreSize to the same value as
PcdFlashNvStorageVariableSize (which in turn comes from VARS_LIVE_SIZE in
"OvmfPkg.fdf.inc").
This equality between both PCDs is a false requirement from
EmuVariableFvbRuntimeDxe. FVB drivers should use
PcdFlashNvStorageVariableSize for supporting non-volatile variables (even
if they happen to be kept in RAM only), along the other PcdFlashNvStorage*
PCDs. Whereas PcdVariableStoreSize is for variables that are volatile at
the gRT->SetVariable() / gRT->GetVariable() API level.
(PlatformPei too bases the preallocation for EmuVariableFvbRuntimeDxe on
PcdFlashNvStorageFtwSpareSize.)
Replace PcdVariableStoreSize in EmuVariableFvbRuntimeDxe with the
same-value PcdFlashNvStorageVariableSize. This means no change in
behavior, and it allows us to increase PcdVariableStoreSize in a later
patch without disturbing EmuVariableFvbRuntimeDxe (or PlatformPei).
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Ching-Pang Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QEMU calculates the UINT64 value in "etc/reserved-memory-end" in a quite
complex way, in the pc_memory_init() function. Log the value as a
DEBUG_VERBOSE message to support debugging.
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1353591
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
According to the UEFI spec, EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() is supposed
to catch an invalid BltOperation, and report it with
EFI_INVALID_PARAMETER.
Remove the assertion from QemuVideoGraphicsOutputBlt() that prevents this
from working in NOOPT and DEBUG builds.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Rocky <xingrong.ni@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Rocky <xingrong.ni@intel.com>
Analyzed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=897
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This improves the UEFI boot time for VMs that have "-kernel", many disks
or NICs, and no "bootindex" properties.
(Unlike in ArmVirt commit 23d04b58e2, in OvmfPkg commit 52fba28994 we
introduced TryRunningQemuKernel() right from the start *after*
BdsLibConnectAll(). Therefore, unlike in patch
'ArmVirtPkg/PlatformBootManagerLib: return to "-kernel before boot
devices"', we adopt the logic as new in this patch.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
PlatformBootManagerAfterConsole()
<--------------------------------+
PlatformBdsConnectSequence() |
ConnectDevicesFromQemu() / EfiBootManagerConnectAll() |
PciAcpiInitialization() ---------------------------------+
TryRunningQemuKernel()
Functionally this is a no-op:
- PciAcpiInitialization() iterates over PciIo protocol instances, which
are available just the same at the new call site.
- The PCI interrupt line register exists only to inform system software
(it doesn't affect hardware) and UEFI drivers don't use PCI interrupts
anyway.
(More background in commits 2e70cf8ade and 5218c27950c4.)
This change will let us move TryRunningQemuKernel() between
PciAcpiInitialization() and PlatformBdsConnectSequence() in the next
patch.
Cc: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
The old-style "Routine Description: ..." comments use the leftmost column
and are placed between the parameter list and the function body. Therefore
they cause git-diff to produce bogus hunk headers that fail to name the
function being patched.
Convert these comment blocks to the current edk2 style. While at it, clean
them up too.
For PlatformBootManagerBeforeConsole() and
PlatformBootManagerAfterConsole(), copy the descriptions from the call
sites in "MdeModulePkg/Universal/BdsDxe/BdsEntry.c". They are more
detailed than the comments in the lib class header
"MdeModulePkg/Include/Library/PlatformBootManagerLib.h"; ArmVirtPkg
already uses these comments.
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gabriel Somlo <gsomlo@gmail.com>
Use ZeroMem() to initialize (or re-initialize) all fields in temporary
PCI_ROOT_BRIDGE_APERTURE variables to zero. This is not mandatory but
is helpful for future extension: when we add new fields to
PCI_ROOT_BRIDGE_APERTURE and the default value of these fields can
safely be zero, this code will not suffer from an additional
change.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Signed-off-by: Yi Li <phoenix.liyi@huawei.com>
Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
QemuBootOrderLib expects PlatformBootManagerLib to call the following
triplet:
(1) EfiBootManagerConnectAll(),
(2) EfiBootManagerRefreshAllBootOption(),
(3) SetBootOrderFromQemu().
This leads to bad performance, when many devices exist such that the
firmware can drive them, but they aren't marked for booting in the
"bootorder" fw_cfg file. Namely,
(1) EfiBootManagerConnectAll() talks to all hardware, which takes long.
Plus some DriverBindingStart() functions write NV variables, which is
also slow. (For example, the IP config policy for each NIC is stored
in an NV var that is named after the MAC).
(2) EfiBootManagerRefreshAllBootOption() generates boot options from the
protocol instances produced by (1). Writing boot options is slow.
(3) Under the above circumstances, SetBootOrderFromQemu() removes most of
the boot options produced by (2). Erasing boot options is slow.
Introduce ConnectDevicesFromQemu() as a replacement for (1): only connect
devices that the QEMU user actually wants to boot off of.
(There's a slight loss of compatibility when a platform switches from
EfiBootManagerConnectAll() to ConnectDevicesFromQemu().
EfiBootManagerConnectAll() may produce UEFI device paths that are unknown
to QemuBootOrderLib (that is, for neither PCI- nor virtio-mmio-based
devices). The BootOrderComplete() function lets such unmatched boot
options survive at the end of the boot order. With
ConnectDevicesFromQemu(), these options will not be auto-generated in the
first place. They may still be produced by other means.
SetBootOrderFromQemu() is not modified in any way; reordering+filtering
boot options remains a separate task.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
The "/MAC(" suffix of the translated UEFI devpath prefix is unnecessary
for matching, because the virtio-mmio base address in VenHwString is
unique anyway. Furthermore, the partial string "MAC(" cannot be processed
by ConvertTextToDevicePath(), which will become relevant later in this
series. Remove "/MAC(".
While at it, remove a bogus comment on PCI.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiang Zheng <xiang.zheng@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # ArmVirtQemu
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Xiang Zheng <xiang.zheng@linaro.org>
Today's implementation forgot to clear the screen to black in
SetMode(). It causes SCT SetMode() test fails.
The patch adds the clear screen operation in SetMode() to fix
the SCT failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The header file provides (extern) declarations for the
EFI_DRIVER_BINDING_PROTOCOL member functions that are defined in
"XenPvBlkDxe.c". This way "gXenPvBlkDxeDriverBinding" can be initialized
near the top of "XenPvBlkDxe.c", ahead of the member function definitions.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file defines macros and types that are
private to the driver and are used by the sole C file of the driver.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file defines macros and types that are private to the driver
and are used by the sole C file of the driver.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the functions that implement
the VIRTIO_DEVICE_PROTOCOL members over virtio-pci (v0.9.5). The functions
are defined in "VirtioPciFunctions.c", and referenced in the
initialization of "mDeviceProtocolTemplate", in "VirtioPciDevice.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares several functions and global variables that are
shared between various translation units in this module. The header file
also defines macros and types that are private to the driver.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file defines macros and types that are
private to the driver and are used by the sole C file of the driver.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file defines macros and types that are private to the driver
and are used by the sole C file of the driver.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file is manually generated with "VbeShim.sh" (from the IA32
assembly code in "VbeShim.asm"), to be included by "VbeShim.c".
"VbeShim.c" is linked into the driver only for the IA32 and X64
architectures: while the InstallVbeShim() function that "VbeShim.c"
defines is declared commonly in "Qemu.h", the call in the also common
"Driver.c" source file depends on the MDE_CPU_IA32 / MDE_CPU_X64
preprocessor macros.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the UnalignedIoWrite32() and UnalignedIoRead32()
functions. The functions are called from VmwareSvgaWrite() and
VmwareSvgaRead() in the common "Driver.c" source file. The
UnalignedIo*32() functions are defined with inline assembly, C-language
compiler intrinsics, or as ASSERT(FALSE), in distinct C files, dependent
on architecture and toolchain.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among many other things, "Qemu.h" declares the
QemuVideoGraphicsOutputConstructor() and
QemuVideoGraphicsOutputDestructor() functions, which are defined in
"Gop.c", and called from "Driver.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares functions that are called
from the FVB protocol member functions in "FwBlockService.c", and defined
in "QemuFlash.c".
Both C files are listed in both "FvbServicesSmm.inf" and
"FvbServicesRuntimeDxe.inf", thus add the header file to both INF files as
well.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file provides (extern) declarations for the
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL member functions that are defined in
"FwBlockService.c". This way "mFvbDeviceTemplate.FwVolBlockInstance" can
be initialized near the top of "FwBlockService.c", ahead of the member
function definitions.
"FwBlockService.c" is linked into both the DXE_SMM_DRIVER and the
DXE_RUNTIME_DRIVER builds of this module, thus list the header file in
both INF files.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header defines the OVMF_INFO_PHYSICAL_ADDRESS macro and the
EFI_XEN_OVMF_INFO structure, which are used in "Xen.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares several functions and global variables that are
shared between various translation units in this module.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the CmosRead8() and CmosWrite8() functions, which
are implemented in "Cmos.c" and called from "MemDetect.c" and
"Platform.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the PlatformConfigSave() and PlatformConfigLoad()
functions (and defines related types and macros). The functions are
defined in "PlatformConfig.c" and called from "Platform.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file defines HII-related macros and types that are shared
between the form description in "PlatformForms.vfr" and the HII driver
logic "Platform.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the functions that implement
the VIRTIO_DEVICE_PROTOCOL members over virtio-mmio. The functions are
defined in "VirtioMmioDeviceFunctions.c", and referenced in the
initialization of "mMmioDeviceProtocolTemplate", in "VirtioMmioDevice.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the CreateExtraRootBusMap(),
DestroyExtraRootBusMap(), and MapRootBusPosToBusNr() functions. They are
defined in "ExtraRootBusMap.c", and called from "QemuBootOrderLib.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, "DebugLibDetect.h" declares the
PlatformDebugLibIoPortFound() function. The function is called from
"DebugLib.c", which is included in both library instances. The function is
defined separately per library instance, in "DebugLibDetectRom.c" and
"DebugLibDetect.c", respectively.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares LoadNvVarsFromFs() and SaveNvVarsToFs(), which
are defined in "FsAccess.c" and called from "NvVarsFileLib.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the AllocateAcpiNvsPool()
function. This function is called from the "LockBoxLib.c" source file (in
the implementation of the SaveLockBox() library API), which is built into
both library instances. AllocateAcpiNvsPool() is implemented separately
per library instance, in "LockBoxBase.c" and "LockBoxDxe.c", respectively.
(In the LockBoxBaseLib instance, the AllocateAcpiNvsPool() function is
never expected to be called -- the public SaveLockBox() API should never
be called before the DXE phase --, we just have to provide a stub for
linking purposes.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InitLinuxDescriptorTables() and
SetLinuxDescriptorTables() functions, which are called from "Linux.c" and
implemented in "LinuxGdt.c".
The header file also declares the JumpToKernel() and JumpToUefiKernel()
functions, which are similarly called from "Linux.c". They are implemented
(dependent on architecture) in "Ia32/JumpToKernel.nasm" and
"X64/JumpToKernel.nasm".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the
InternalMemEncryptSevSetMemoryDecrypted() and
InternalMemEncryptSevSetMemoryEncrypted() functions. The functions are
called from "X64/MemEncryptSevLib.c", and defined in
"X64/VirtualMemory.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the InternalAcpiGetTimerTick() function. The
function is called from "AcpiTimerLib.c", which is built into all three
library instances. The function is defined individually per library
instance, in "BaseRomAcpiTimerLib.c", "BaseAcpiTimerLib.c", and
"DxeAcpiTimerLib.c" (enumerated in increasing firmware phase order).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the AmdSevInstallIoMmuProtocol() function, which
is implemented in "AmdSevIoMmu.c" and called from "IoMmuDxe.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file provides (extern) declarations for the
EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL member functions that are defined in
"Fvb.c". This way "mEmuVarsFvb.FwVolBlockInstance" can be initialized near
the top of "Fvb.c", ahead of the member function definitions.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file provides (extern) declarations for the
EFI_LEGACY_REGION2_PROTOCOL member functions that are defined in
"LegacyRegion.c". This way "mLegacyRegion2" can be initialized near the
top of "LegacyRegion.c", ahead of the member function definitions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file provides (extern) declarations for the
EFI_LEGACY_INTERRUPT_PROTOCOL member functions that are defined in
"LegacyInterrupt.c". This way "mLegacyInterrupt" can be initialized near
the top of "LegacyInterrupt.c", ahead of the member function definitions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The header file declares the functions LegacyRegionInit(),
LegacyInterruptInstall() and LegacyBiosPlatformInstall(). They are defined
in "LegacyRegion.c", "LegacyInterrupt.c", and "LegacyPlatform.c",
respectively, and are all called from CsmSupportLibConstructor() in
"CsmSupportLib.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares the
"gBlockMmioToBlockIoComponentName" and "gBlockMmioToBlockIoComponentName2"
protocol instance structures. They are defined and initialized in
"ComponentName.c" and installed in "BlockIo.c".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"QemuLoader.h" defines the command structures of QEMU's ACPI
linker/loader. The client code is in "QemuFwCfgAcpi.c", which is part of
both builds of this driver.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We added initial support for QEMU's ACPI linker/loader in commit
a618eaa1f4 ("OvmfPkg: AcpiPlatformDxe: don't rely on unstable QEMU
interface", 2014-06-19). This commit defined the command structures in the
new file "QemuLoader.h", and #included the header in the preexistent
"Qemu.c" file, where the initial command script processing loop was being
implemented.
In commit 14b0faadfc ("OvmfPkg/AcpiPlatformDxe: Split QEMU fw-cfg into a
new file", 2015-02-02), we extracted the -- by then, more advanced --
linker/loader script processing from "Qemu.c" to "QemuFwCfgAcpi.c".
"Qemu.c" was going to need "QemuLoader.h" no longer, but we forgot to make
the #include directive unique to the new "QemuFwCfgAcpi.c" file. Do it
now.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Among other things, the header file declares InstallAcpiTables(). This
function is called from AcpiPlatformEntryPoint() -- the entry point of
both INF files, defined in the common "EntryPoint.c" file --, and it is
defined (dependent on INF file) in "AcpiPlatform.c" or
"QemuFwCfgAcpiPlatform.c".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Ref: http://mid.mail-archive.com/E92EE9817A31E24EB0585FDF735412F56327F7D3@ORSMSX113.amr.corp.intel.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This makes it easier to insert future source files, and to see the source
files that are unique to either INF file. No functional changes.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
- the @file comment block should match between INF and main C file
- rewrap / refill columns to 79 characters
- insert space before opening paren
- prefix and suffix //-style comment block with empty // lines
- fix indentation of arguments in multi-line function call
- general tab spacing (indent step) is 2 in edk2, unlike QEMU's 4
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Commit:24e4ad7 (OvmfPkg: Add AmdSevDxe driver) added a driver which runs
early in DXE phase and clears the C-bit from NonExistent entry -- which
is later split and accommodate the flash MMIO. When SMM is enabled, we
build two sets of page tables; first page table is used when executing
code in non SMM mode (SMM-less-pgtable) and second page table is used
when we are executing code in SMM mode (SMM-pgtable).
During boot time, AmdSevDxe driver clears the C-bit from the
SMM-less-pgtable. But when SMM is enabled, Qemu Flash services are used
from SMM mode.
In this patch we explicitly clear the C-bit from Qemu flash MMIO range
before we probe the flash. When OVMF is built with SMM_REQUIRE then
call to initialize the flash services happen after the SMM-pgtable is
created and processor has served the first SMI. At this time we will
have access to the SMM-pgtable.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
[lersek@redhat.com: trivial coding style improvements]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The library registers a security management handler, to measure images
that are not measure in PEI phase. For example with the qemu PXE rom:
Loading driver at 0x0003E6C2000 EntryPoint=0x0003E6C9076 8086100e.efi
And the following binary_bios_measurements log entry seems to be
added:
PCR: 2 type: EV_EFI_BOOT_SERVICES_DRIVER size: 0x4e digest: 70a22475e9f18806d2ed9193b48d80d26779d9a4
The following order of operations ensures that 3rd party UEFI modules,
such as PCI option ROMs and other modules possibly loaded from outside
of firmware volumes, are measured into the TPM:
(1) Tcg2Dxe is included in DXEFV, therefore it produces the TCG2
protocol sometime in the DXE phase (assuming a TPM2 chip is present,
reported via PcdTpmInstanceGuid).
(2) The DXE core finds that no more drivers are left to dispatch from
DXEFV, and we enter the BDS phase.
(3) OVMF's PlatformBootManagerLib connects all PCI root bridges
non-recursively, producing PciIo instances and discovering PCI
oproms.
(4) The dispatching of images that don't originate from FVs is deferred
at this point, by
"MdeModulePkg/Universal/SecurityStubDxe/Defer3rdPartyImageLoad.c".
(5) OVMF's PlatformBootManagerLib signals EndOfDxe.
(6) OVMF's PlatformBootManagerLib calls
EfiBootManagerDispatchDeferredImages() -- the images deferred in
step (4) are now dispatched.
(7) Image dispatch invokes the Security / Security2 Arch protocols
(produced by SecurityStubDxe). In this patch, we hook
DxeTpm2MeasureBootLib into SecurityStubDxe, therefore image dispatch
will try to locate the TCG2 protocol, and measure the image into the
TPM2 chip with the protocol. Because of step (1), the TCG2 protocol
will always be found and used (assuming a TPM2 chip is present).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module measures and log the boot environment. It also produces
the Tcg2 protocol, which allows for example to read the log from OS.
The linux kernel doesn't yet read the EFI_TCG2_EVENT_LOG_FORMAT_TCG_2,
which is required for crypto-agile log. In fact, only upcoming 4.16
adds support EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: SMBIOS=0x3fa1f000 ACPI=0x3fbb6000 ACPI 2.0=0x3fbb6014 MEMATTR=0x3e7d4318 TPMEventLog=0x3db21018
$ python chipsec_util.py tpm parse_log binary_bios_measurements
[CHIPSEC] Version 1.3.5.dev2
[CHIPSEC] API mode: using OS native API (not using CHIPSEC kernel module)
[CHIPSEC] Executing command 'tpm' with args ['parse_log', '/tmp/binary_bios_measurements']
PCR: 0 type: EV_S_CRTM_VERSION size: 0x2 digest: 1489f923c4dca729178b3e3233458550d8dddf29
+ version:
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: fd39ced7c0d2a61f6830c78c7625f94826b05bcc
+ base: 0x820000 length: 0xe0000
PCR: 0 type: EV_EFI_PLATFORM_FIRMWARE_BLOB size: 0x10 digest: 39ebc6783b72bc1e73c7d5bcfeb5f54a3f105d4c
+ base: 0x900000 length: 0xa00000
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x35 digest: 57cd4dc19442475aa82743484f3b1caa88e142b8
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 9b1387306ebb7ff8e795e7be77563666bbf4516e
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 9afa86c507419b8570c62167cb9486d9fc809758
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x24 digest: 5bf8faa078d40ffbd03317c93398b01229a0e1e0
PCR: 7 type: EV_EFI_VARIABLE_DRIVER_CONFIG size: 0x26 digest: 734424c9fe8fc71716c42096f4b74c88733b175e
PCR: 7 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x3e digest: 252f8ebb85340290b64f4b06a001742be8e5cab6
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x6e digest: 22a4f6ee9af6dba01d3528deb64b74b582fc182b
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x80 digest: b7811d5bf30a7efd4e385c6179fe10d9290bb9e8
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x84 digest: 425e502c24fc924e231e0a62327b6b7d1f704573
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x9a digest: 0b5d2c98ac5de6148a4a1490ff9d5df69039f04e
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0xbd digest: 20bd5f402271d57a88ea314fe35c1705956b1f74
PCR: 1 type: EV_EFI_VARIABLE_BOOT size: 0x88 digest: df5d6605cb8f4366d745a8464cfb26c1efdc305c
PCR: 4 type: EV_EFI_ACTION size: 0x28 digest: cd0fdb4531a6ec41be2753ba042637d6e5f7f256
PCR: 0 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 1 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 2 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 3 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 4 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
PCR: 5 type: EV_SEPARATOR size: 0x4 digest: 9069ca78e7450a285173431b3e52c5c25299e473
$ tpm2_pcrlist
sha1 :
0 : 35bd1786b6909daad610d7598b1d620352d33b8a
1 : ec0511e860206e0af13c31da2f9e943fb6ca353d
2 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
3 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
4 : 45a323382bd933f08e7f0e256bc8249e4095b1ec
5 : d16d7e629fd8d08ca256f9ad3a3a1587c9e6cc1b
6 : b2a83b0ebf2f8374299a5b2bdfc31ea955ad7236
7 : 518bd167271fbb64589c61e43d8c0165861431d8
8 : 0000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000
sha256 :
0 : 9ae903dbae3357ac00d223660bac19ea5c021499a56201104332ab966631ce2c
1 : acc611d90245cf04e77b0ca94901f90e7fa54770f0426f53c3049b532243d1b8
2 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
3 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
4 : 7a94ffe8a7729a566d3d3c577fcb4b6b1e671f31540375f80eae6382ab785e35
5 : a5ceb755d043f32431d63e39f5161464620a3437280494b5850dc1b47cc074e0
6 : 3d458cfe55cc03ea1f443f1562beec8df51c75e14a9fcf9a7234a13f198e7969
7 : 65caf8dd1e0ea7a6347b635d2b379c93b9a1351edc2afc3ecda700e534eb3068
8 : 0000000000000000000000000000000000000000000000000000000000000000
9 : 0000000000000000000000000000000000000000000000000000000000000000
10 : 0000000000000000000000000000000000000000000000000000000000000000
11 : 0000000000000000000000000000000000000000000000000000000000000000
12 : 0000000000000000000000000000000000000000000000000000000000000000
13 : 0000000000000000000000000000000000000000000000000000000000000000
14 : 0000000000000000000000000000000000000000000000000000000000000000
15 : 0000000000000000000000000000000000000000000000000000000000000000
16 : 0000000000000000000000000000000000000000000000000000000000000000
17 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
18 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
19 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
20 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
21 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
22 : ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
23 : 0000000000000000000000000000000000000000000000000000000000000000
sha384 :
The PhysicalPresenceLib is required, it sets some variables, but the
firmware doesn't act on it yet.
Laszlo Ersek explained on the list why Tpm2DeviceLib has to be
resolved differently for DXE_DRIVER modules in general and for
"Tcg2Dxe.inf" specifically:
* We have a library class called Tpm2DeviceLib -- this is basically the
set of APIs declared in "SecurityPkg/Include/Library/Tpm2DeviceLib.h".
Its leading comment says "This library abstract how to access TPM2
hardware device".
There are two *sets* of APIs in "Tpm2DeviceLib.h":
(a) functions that deal with the TPM2 device:
- Tpm2RequestUseTpm(),
- Tpm2SubmitCommand()
This set of APIs is supposed to be used by clients that *consume*
the TPM2 device abstraction.
(b) the function Tpm2RegisterTpm2DeviceLib(), which is supposed to be
used by *providers* of various TPM2 device abstractions.
* Then, we have two implementations (instances) of the Tpm2DeviceLib class:
(1) SecurityPkg/Library/Tpm2DeviceLibTcg2/Tpm2DeviceLibTcg2.inf
(2) SecurityPkg/Library/Tpm2DeviceLibRouter/Tpm2DeviceLibRouterDxe.inf
(1) The first library instance ("Tpm2DeviceLibTcg2.inf") implements the
APIs listed under (a), and it does not implement (b) -- see
EFI_UNSUPPORTED. In other words, this lib instance is strictly meant for
drivers that *consume* the TPM2 device abstraction. And, the (a) group
of APIs is implemented by forwarding the requests to the TCG2 protocol.
The idea here is that all the drivers that consume the TPM2 abstraction
do not have to be statically linked with a large TPM2 device library
instance; instead they are only linked (statically) with this "thin"
library instance, and all the actual work is delegated to whichever
driver that provides the singleton TCG2 protocol.
(2) The second library instance ("Tpm2DeviceLibRouterDxe.inf") is meant
for the driver that offers (produces) the TCG2 protocol. This lib
instance implements both (a) and (b) API groups.
* Here's how things fit together:
(i) The "SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2InstanceLibDTpm.inf"
library instance (which has no lib class) is linked into "Tcg2Dxe.inf"
via NULL class resolution. This simply means that before the
"Tcg2Dxe.inf" entry point function is entered, the constructor function
of "Tpm2InstanceLibDTpm.inf" will be called.
(ii) This Tpm2InstanceLibDTpmConstructor() function calls API (b), and
registers its own actual TPM2 command implementation with the
"Tpm2DeviceLibRouter" library instance (also linked into the Tcg2Dxe
driver). This provides the back-end for the API set (a).
TCG2 protocol provider (Tcg2Dxe.inf driver) launches
|
v
NULL class: Tpm2InstanceLibDTpm instance construction
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
backend registration for API set (a)
(iii) The Tcg2Dxe driver exposes the TCG2 protocol.
(iv) A TPM2 consumer calls API set (a) via lib instance (1). Such calls
land in Tcg2Dxe, via the protocol.
(v) Tcg2Dxe serves the protocol request by forwarding it to API set (a)
from lib instance (2).
(vi) Those functions call the "backend" functions registered by
Tpm2DeviceLibDTpm in step (ii).
TPM 2 consumer driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibTcg2 instance
|
v
TCG2 protocol interface
|
v
TCG2 protocol provider: Tcg2Dxe.inf driver
|
v
Tpm2DeviceLib class: Tpm2DeviceLibRouter instance
|
v
NULL class: Tpm2InstanceLibDTpm instance
(via earlier registration)
|
v
TPM2 chip (actual hardware)
* So that is the "router" pattern in edk2. Namely,
- Consumers of an abstraction use a thin library instance.
- The thin library instance calls a firmware-global (singleton) service,
i.e. a PPI (in the PEI phase) or protocol (in the DXE phase).
- The PEIM providing the PPI, or the DXE driver providing the protocol,
don't themselves implement the actual service either. Instead they
offer a "registration" service too, and they only connect the incoming
"consumer" calls to the earlier registered back-end(s).
- The "registration service", for back-ends to use, may take various
forms.
It can be exposed globally to the rest of the firmware, as
another member function of the PPI / protocol structure. Then backends
can be provided by separate PEIMs / DXE drivers.
Or else, the registration service can be exposed as just another
library API. In this case, the backends are provided as NULL class
library instances, and a platform DSC file links them into the PEIM /
DXE driver via NULL class resolutions. The backend lib instances call
the registration service in their own respective constructor
functions.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This module will initialize TPM device, measure reported FVs and BIOS
version. We keep both SHA-1 and SHA-256 for the TCG 1.2 log format
compatibility, but the SHA-256 measurements and TCG 2 log format are
now recommended.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Tcg2ConfigPei module informs the firmware globally about the TPM
device type, by setting the PcdTpmInstanceGuid PCD to the appropriate
GUID value. The original module under SecurityPkg can perform device
detection, or read a cached value from a non-volatile UEFI variable.
OvmfPkg's clone of the module only performs the TPM2 hardware detection.
This is what the module does:
- Check the QEMU hardware for TPM2 availability only
- If found, set the dynamic PCD "PcdTpmInstanceGuid" to
&gEfiTpmDeviceInstanceTpm20DtpmGuid. This is what informs the rest of
the firmware about the TPM type.
- Install the gEfiTpmDeviceSelectedGuid PPI. This action permits the
PEI_CORE to dispatch the Tcg2Pei module, which consumes the above PCD.
In effect, the gEfiTpmDeviceSelectedGuid PPI serializes the setting
and the consumption of the "TPM type" PCD.
- If no TPM2 was found, install gPeiTpmInitializationDonePpiGuid.
(Normally this is performed by Tcg2Pei, but Tcg2Pei doesn't do it if
no TPM2 is available. So in that case our Tcg2ConfigPei must do it.)
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Original commit message from Brijesh:
> When OVMF is built with SMM, SMMSaved State area (SMM_DEFAULT_SMBASE +
> SMRAM_SAVE_STATE_MAP_OFFSET) contains data which need to be accessed by
> both guest and hypervisor. Since the data need to be accessed by both
> hence we must map the SMMSaved State area as unencrypted (i.e C-bit
> cleared).
>
> This patch clears the SavedStateArea address before SMBASE relocation.
> Currently, we do not clear the SavedStateArea address after SMBASE is
> relocated due to the following reasons:
>
> 1) Guest BIOS never access the relocated SavedStateArea.
>
> 2) The C-bit works on page-aligned address, but the SavedStateArea
> address is not a page-aligned. Theoretically, we could roundup the
> address and clear the C-bit of aligned address but looking carefully we
> found that some portion of the page contains code -- which will causes a
> bigger issue for the SEV guest. When SEV is enabled, all the code must
> be encrypted otherwise hardware will cause trap.
Changes by Laszlo:
- separate AmdSevDxe bits from SmmCpuFeaturesLib bits;
- spell out PcdLib dependency with #include and in LibraryClasses;
- replace (SMM_DEFAULT_SMBASE + SMRAM_SAVE_STATE_MAP_OFFSET) calculation
with call to new MemEncryptSevLocateInitialSmramSaveStateMapPages()
function;
- consequently, pass page-aligned BaseAddress to
MemEncryptSevClearPageEncMask();
- zero the pages before clearing the C-bit;
- pass Flush=TRUE to MemEncryptSevClearPageEncMask();
- harden the treatment of MemEncryptSevClearPageEncMask() failure.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Based on the following patch from Brijesh Singh <brijesh.singh@amd.com>:
[PATCH v2 1/2] OvmfPkg/AmdSevDxe: Clear the C-bit from SMM Saved State
http://mid.mail-archive.com/20180228161415.28723-2-brijesh.singh@amd.comhttps://lists.01.org/pipermail/edk2-devel/2018-February/022016.html
Once PiSmmCpuDxeSmm relocates SMBASE for all VCPUs, the pages of the
initial SMRAM save state map can be re-encrypted (including zeroing them
out after setting the C-bit on them), and they can be released to DXE for
general use (undoing the allocation that we did in PlatformPei's
AmdSevInitialize() function).
The decryption of the same pages (which will occur chronologically
earlier) is implemented in the next patch; hence the "re-encryption" part
of this patch is currently a no-op. The series is structured like this in
order to be bisection-friendly. If the decryption patch preceded this
patch, then an info leak would be created while standing between the
patches.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next two patches, we'll temporarily decrypt the pages containing
the initial SMRAM save state map, for SMBASE relocation. (Unlike the
separate, relocated SMRAM save state map of each VCPU, the original,
shared map behaves similarly to a "common buffer" between guest and host.)
The decryption will occur near the beginning of the DXE phase, in
AmdSevDxe, and the re-encryption will occur in PiSmmCpuDxeSmm, via OVMF's
SmmCpuFeaturesLib instance.
There is a non-trivial time gap between these two points, and the DXE
phase might use the pages overlapping the initial SMRAM save state map for
arbitrary purposes meanwhile. In order to prevent any information leak
towards the hypervisor, make sure the DXE phase puts nothing in those
pages until re-encryption is done.
Creating a memalloc HOB for the area in question is safe:
- the temporary SEC/PEI RAM (stack and heap) is based at
PcdOvmfSecPeiTempRamBase, which is above 8MB,
- the permanent PEI RAM (installed in PlatformPei's PublishPeiMemory()
function) never starts below PcdOvmfDxeMemFvBase, which is also above
8MB.
The allocated pages can be released to the DXE phase after SMBASE
relocation and re-encryption are complete.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In the next three patches, we're going to modify three modules under
OvmfPkg. When OVMF is built with -D SMM_REQUIRE and runs in an SEV guest,
each affected module will have to know the page range that covers the
initial (pre-SMBASE relocation) SMRAM save state map. Add a helper
function to MemEncryptSevLib that calculates the "base address" and
"number of pages" constants for this page range.
(In a RELEASE build -- i.e., with assertions disabled and optimization
enabled --, the helper function can be compiled to store two constants
determined at compile time.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
List those and only those libraries that are used.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are many overlong lines; it's hard to work with the module like
this. Rewrap all files to 79 columns.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
In edk2, the "static" keyword is spelled "STATIC". Also let "STATIC" stand
alone on a line in function definitions.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "clear" reference to the C-bit with a "set" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Document the
"Cr3BaseAddress" parameter, and correct several parameter references.
Replace a "set" reference to the C-bit with a "clear" reference.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Replace any
leftover "clear" references to the C-bit with "set" references. Also
remove any excess space in the comment block, and unindent the trailing
"**/" if necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary. Correct several parameter references.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
The declaration and the definition(s) of the function should have
identical leading comments and/or identical parameter lists. Also remove
any excess space in the comment block, and unindent the trailing "**/" if
necessary.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
There are many overlong lines; it's hard to work with the library like
this. Rewrap all files to 79 columns.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
These are listed under "ShellPkg/Application/Shell/Shell.inf", but they
have been commented out ever since commit 345a0c8fce ("OvmfPkg: Add
support for UEFI shell", 2011-06-26). No such lib classes exist in edk2.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=800
Based on content from the following branch/commits:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport33bab4031aca516b1a612b9f111f2e
The BootGraphicsResourceTableDxe module uses the BmpSupportLib
and SafeIntLib to convert a GOP BLT buffer to a BMP graphics image.
Add library mappings for these new library classes.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
"Platform.h" declares the AmdSevInitialize() function without EFIAPI, but
the definition in "AmdSev.c" includes EFIAPI.
GCC toolchains without LTO do not catch this error because "AmdSev.c" does
not include "Platform.h"; i.e. the declaration used by callers such as
"Platform.c" is not actually matched against the function definition at
build time.
With LTO enabled, the mismatch is found -- however, as a warning only, due
to commit f8d0b96629 ("BaseTools GCC5: disable warnings-as-errors for
now", 2016-08-03).
Include the header in the C file (which turns the issue into a hard build
error on all GCC toolchains), plus sync the declaration from the header
file to the C file.
There's been no functional breakage because AmdSevInitialize() takes no
parameters.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 13b5d743c8
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ovmf appended option -mno-mmx -mno-sse, but these two options were enabled
in Openssl. The compiler option becomes -mmmx ?msse -mno-mmx -mno-sse. It
trig mac clang compiler hang when compile one source file in openssl.
This issue is found when SECURE_BOOT_ENABLE is TRUE. This may be the compiler
issue. To work around it, don't add these two options for XCODE5 tool chain.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 2ac1730bf2 (MdeModulePkg/DxeIpl: Mark page table as read-only)
sets the memory pages used for page table as read-only after paging is
setup and sets CR0.WP to protect CPU modifying the read-only pages.
The commit causes #PF when MemEncryptSevClearPageEncMask() or
MemEncryptSevSetPageEncMask() tries to change the page-table attributes.
This patch takes the similar approach as Commit 147fd35c3e
(UefiCpuPkg/CpuDxe: Enable protection for newly added page table).
When page table protection is enabled, we disable it temporarily before
changing the page table attributes.
This patch makes use of the same approach as Commit 2ac1730bf2
(MdeModulePkg/DxeIpl: Mark page table as read-only)) for allocating
page table memory from reserved memory pool, which helps to reduce a
potential "split" operation.
The patch duplicates code from commit 147fd35c3e. The code duplication
will be removed after we implement page table manipulation library. See
bugzilla https://bugzilla.tianocore.org/show_bug.cgi?id=847.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The TFTP command was converted from a NULL class library instance
to a dynamic shell command in commit 0961002352.
This patch complements commit f9bc2f8763, which only removed the
old library, but didn't add the new dynamic command。
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@linaro.org>
Original code breaks a single assembly code to multiple lines.
But, when VS CL.exe preprocesses the FixedPcdGet32() macro
invocation to the replacement text, it loses '\', and causes
NASM to fail.
Changing the multiple lines to one line to resolve the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This means that SetBootOrderFromQemu() will preserve all UEFI boot options
matched by any given OFW devpath, such as PXEv4, HTTPv4, PXEv6 and HTTPv6
boot options for the same NIC. Currently we stop the matching / appending
for the OFW devpath coming from the outer loop whenever we find the first
UEFI boot option match in the inner loop.
(The previous patch was about multiple OFW devpaths matching a single UEFI
boot option (which should never happen). This patch is about a single OFW
devpath matching multiple UEFI boot options. With the "break" statement
removed here, the small optimization from the last patch becomes a bit
more relevant, because now the inner loop always counts up to
ActiveCount.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SetBootOrderFromQemu() function implements a nested loop where
- the outer loop iterates over all OpenFirmware (OFW) device paths in the
QEMU boot order, and translates each to a UEFI device path prefix;
- the inner loop matches the current (translated) prefix against all
active UEFI boot options in turn;
- if the UEFI boot option is matched by the translated prefix, the UEFI
boot option is appended to the "new" UEFI boot order, and marked as
"has been appended".
This patch adds a micro-optimization where already matched / appended UEFI
boot options are skipped in the inner loop. This is not a functional
change. A functional change would be if, as a consequence of the patch,
some UEFI boot options would no longer be *doubly* matched.
For a UEFI boot option to be matched by two translated prefixes, one of
those prefixes would have to be a (proper, or equal) prefix of the other
prefix. The PCI and MMIO OFW translation routines output such only in the
following cases:
- When the original OFW device paths are prefixes of each other. This is
not possible from the QEMU side. (Only leaf devices are bootable.)
- When the translation rules in the routines are incomplete, and don't
look at the OFW device paths for sufficient length (i.e., at nodes where
they would already differ, and the difference would show up in the
translation output).
This would be a shortcoming of the translation routines and should be
fixed in TranslatePciOfwNodes() and TranslateMmioOfwNodes(), whenever
identified.
Even in the second case, this patch would replace the double appending of
a single UEFI boot option (matched by two different OFW device paths) with
a correct, or cross-, matching of two different UEFI boot options. Again,
this is not expected, but arguably it would be more correct than duplicate
boot option appending, should it occur due to any (unexpected, unknown)
lack of detail in the translation routines.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When SEV is enabled, every debug message printed by OVMF to the
QEMU debug port traps from the guest to QEMU character by character
because "REP OUTSB" cannot be used by IoWriteFifo8. Furthermore,
when OVMF is built with the DEBUG_VERBOSE bit (value 0x00400000)
enabled in "gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel", then the
OvmfPkg/IoMmuDxe driver, and the OvmfPkg/Library/BaseMemEncryptSevLib
library instance that is built into it, produce a huge amount of
log messages. Therefore, in SEV guests, the boot time impact is huge
(about 45 seconds _additional_ time spent writing to the debug port).
While these messages are very useful for analyzing guest behavior,
most of the time the user won't be capturing the OVMF debug log.
In fact libvirt does not provide a method for configuring log capture;
users that wish to do this (or are instructed to do this) have to resort
to <qemu:arg>.
The debug console device provides a handy detection mechanism; when read,
it returns 0xE9 (which is very much unlike the 0xFF that is returned by
an unused port). Use it to skip the possibly expensive OUT instructions
when the debug I/O port isn't plugged anywhere.
For SEC, the debug port has to be read before each full message.
However:
- if the debug port is available, then reading one byte before writing
a full message isn't tragic, especially because SEC doesn't print many
messages
- if the debug port is not available, then reading one byte instead of
writing a full message is still a win.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The next patch will want to add a global variable to
PlatformDebugLibIoPort, but this is not suitable for the SEC
phase, because SEC runs from read-only flash. The solution is
to have two library instances, one for SEC and another
for all other firmware phases. This patch adds the "plumbing"
for the SEC library instance, separating the INF files and
moving the constructor to a separate C source file.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove Uefi.h, which includes UefiSpec.h, and change the
return value to match the RETURN_STATUS type.
Contributed-under: TianoCore Contribution Agreement 1.1
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen (Intel address) <jordan.l.justen@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(1) In the PEI phase, the PCD database is maintained in a GUID HOB. In
OVMF, we load the PCD PEIM before any other PEIMs (using APRIORI PEI),
so that all other PEIMs can use dynamic PCDs. Consequently,
- the PCD GUID HOB is initially allocated from the temporary SEC/PEI
heap,
- whenever we introduce a dynamic PCD to a PEIM built into OVMF such
that the PCD is new to OVMF's whole PEI phase, the PCD GUID HOB (and
its temporary heap footprint) grow.
I've noticed that, if we add just one more dynamic PCD to the PEI
phase, then in the X64 build,
- we get very close to the half of the temporary heap (i.e., 8192
bytes),
- obscure PEI phase hangs or DXE core initialization failures
(ASSERTs) occur. The symptoms vary between the FD_SIZE_2MB and
FD_SIZE_4MB builds of X64 OVMF.
(2) I've found that commit
2bbd7e2fbd ("UefiCpuPkg/MtrrLib: Update algorithm to calculate
optimal settings", 2017-09-27)
introduced a large (16KB) stack allocation:
> The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and
> MtrrSetMemoryAttribute() to use the 4-page stack buffer for calculation.
> ...
> +#define SCRATCH_BUFFER_SIZE (4 * SIZE_4KB)
> ...
> @@ -2207,17 +2462,66 @@ MtrrSetMemoryAttributeInMtrrSettings (
> ...
> + UINT8 Scratch[SCRATCH_BUFFER_SIZE];
(3) OVMF's temp SEC/PEI RAM size has been 32KB ever since commit
7cb6b0e068 ("OvmfPkg: Move SEC/PEI Temporary RAM from 0x70000 to
0x810000", 2014-01-21)
Of that, the upper 16KB half is stack (growing down), and the lower
16KB half is heap.
Thus, OvmfPkg/PlatformPei's calls to "UefiCpuPkg/Library/MtrrLib", in
QemuInitializeRam(), cause the Scratch array to overflow the entire
stack (heading towards lower addresses), and corrupt the heap below
the stack. It turns out that the total stack demand is about 24KB, so
the overflow is able to corrupt the upper 8KB of the heap. If that
part of the heap is actually used (for example because we grow the PCD
GUID HOB sufficiently), mayhem ensues.
(4) Right after commit 7cb6b0e068 (see above), there would be no room
left above the 32KB temp SEC/PEI RAM. However, given more recent
commits
45d8708151 ("OvmfPkg/PlatformPei: rebase and resize the permanent
PEI memory for S3", 2016-07-13)
6b04cca4d6 ("OvmfPkg: remove PcdS3AcpiReservedMemoryBase,
PcdS3AcpiReservedMemorySize", 2016-07-12)
we can now restore the temp SEC/PEI RAM size to the original
(pre-7cb6b0e06809) 64KB. This will allow for a 32KB temp SEC/PEI
stack, which accommodates the ~24KB demand mentioned in (3).
(Prior patches in this series will let us monitor the stack usage in
the future.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=747
Ref: http://mid.mail-archive.com/a49cc089-12ae-a887-a4d6-4dc509233a74@redhat.com
Ref: http://mid.mail-archive.com/03e369bb-77c4-0134-258f-bdae62cbc8c5@redhat.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
XenHypercallLib uses the 'hvc' instruction, which is not implemented
on all ARMv7 CPUs, and so we need to explicitly specify a CPU that
has the virtualization extensions.
This override used to be set at the platform level, but this was removed
in commit 0d36a219c7
('ArmPlatformPkg/PL031RealTimeClockLib: drop ArmPlatformSysConfigLib
reference), under the assumption that all users of the 'hvc' instruction
had already been fixed.
So fix this for GNU binutils by adding the 'virt' arch extension
directive, and for RVCT by setting the --cpu command line option to a
CPU that is virt capable.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
I missed the following, both while reviewing and while testing commit
6041ac65ae ("OvmfPkg/PlatformPei: DENY_EXECUTE_ON_SECURITY_VIOLATION
when SEV is active", 2017-10-05):
If "-D SECURE_BOOT_ENABLE" is not passed on the "build" command line, then
OVMF has no dynamic default at all for
"PcdOptionRomImageVerificationPolicy". This means that the PcdSet32S()
call added in the subject commit doesn't even compile:
> OvmfPkg/PlatformPei/AmdSev.c: In function 'AmdSevInitialize':
> OvmfPkg/PlatformPei/AmdSev.c:67:3: error: implicit declaration of
> function '_PCD_SET_MODE_32_S_PcdOptionRomImageVerificationPolicy'
> [-Werror=implicit-function-declaration]
> PcdStatus = PcdSet32S (PcdOptionRomImageVerificationPolicy, 0x4);
> ^
> cc1: all warnings being treated as errors
Make the current, SB-only, 0x00 dynamic default unconditional.
This is the simplest approach, and it reflects the intent of original
commit 1fea9ddb4e ("OvmfPkg: execute option ROM images regardless of
Secure Boot", 2016-01-07). Without SECURE_BOOT_ENABLE,
"SecurityPkg/Library/DxeImageVerificationLib" is not used anyway, so the
PCD is never read.
This issue was first caught and reported by Gerd Hoffmann
<kraxel@redhat.com>'s Jenkins CI. Later it was also reported in
<https://bugzilla.tianocore.org/show_bug.cgi?id=737>.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: 6041ac65ae
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: trim commit message as suggested by Jordan]
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: add reference to TianoCore BZ#737]
The following commit:
1fea9ddb4e OvmfPkg: execute option ROM images regardless of Secure Boot
sets the OptionRomImageVerificationPolicy to ALWAYS_EXECUTE the expansion
ROMs attached to the emulated PCI devices. A expansion ROM constitute
another channel through which a cloud provider (i.e hypervisor) can
inject a code in guest boot flow to compromise it.
When SEV is enabled, the bios code has been verified by the guest owner
via the SEV guest launch sequence before its executed. When secure boot,
is enabled, lets make sure that we do not allow guest bios to execute a
code which is not signed by the guest owner.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=728
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
QemuVideoDxe driver will link VBE SHIM into page 0. If NULL pointer
detection is enabled, this driver will fail to load. NULL pointer detection
bypassing code is added to prevent such problem during boot.
Please note that Windows 7 will try to access VBE SHIM during boot if it's
installed, and then cause boot failure. This can be fixed by setting BIT7
of PcdNullPointerDetectionPropertyMask to disable NULL pointer detection
after EndOfDxe. As far as we know, there's no other OSs has such issue.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Parse QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION from the bridges'
conventional config spaces. Translate the fields as follows:
* BusNumbers:
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- reserve the requested value. (NB, bus number reservation
is not supposed to work before
<https://bugzilla.tianocore.org/show_bug.cgi?id=656> is fixed.)
* Io:
* 0 -- no reservation;
* (-1) -- keep our current default (512B);
* otherwise -- round up the requested value and reserve that.
* NonPrefetchable32BitMmio:
* 0 -- no reservation;
* (-1) -- keep our current default (2MB);
* otherwise -- round up the requested value and reserve that.
* Prefetchable32BitMmio:
* 0 -- no reservation, proceed to Prefetchable64BitMmio;
* (-1) -- firmware default, i.e. no reservation, proceed to
Prefetchable64BitMmio;
* otherwise -- round up the requested value and reserve that. (NB, if
Prefetchable32BitMmio is reserved in addition to
NonPrefetchable32BitMmio, then PciBusDxe currently runs into an
assertion failure. Refer to
<https://bugzilla.tianocore.org/show_bug.cgi?id=720>.)
* Prefetchable64BitMmio:
* only reached if Prefetchable32BitMmio was not reserved;
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- round up the requested value and reserve that.
If QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION is missing, plus any
time the rounding fails, fall back to the current defaults.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Extract the SetIoPadding() and SetMmioPadding() functions, so that we can
set EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR fields using parameter names and
values that are more friendly than the original field names and their
expected values.
Introduce the HighBitSetRoundUp32() and HighBitSetRoundUp64() functions
for calculating the last parameter ("SizeExponent") of SetIoPadding() and
SetMmioPadding().
Put the new functions to use when requesting the default reservations. (In
order to be consistent with a later patch, "SizeExponent" is calculated
for SetIoPadding() with HighBitSetRoundUp64().)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PciHotPlugInitDxe has a static variable called "mPadding" (of type
RESOURCE_PADDING), which describes two constant resource reservations:
- MmioPadding: 2MB of non-prefetchable (hence 32-bit) MMIO space,
- IoPadding: 512B of IO space.
In the GetResourcePadding() member function of
EFI_PCI_HOT_PLUG_INIT_PROTOCOL, the driver outputs a dynamically allocated
verbatim copy of "mPadding", for PciBusDxe to consume in its
ApplyResourcePadding() function.
In a later patch, we're going to compose the set of resource reservations
dynamically, based on QEMU hints. Generalize the RESOURCE_PADDING
structure so that we may generate (or not generate) each resource type
individually:
- Replace the named "MmioPadding" and "IoPadding" fields in
RESOURCE_PADDING with an array of descriptors,
- remove "mPadding",
- in GetResourcePadding(), request the same (default) reservations as
before, as if we attempted and failed to fetch the QEMU hints.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The non-prefetchable MMIO aperture of a bridge can never fall outside of
the 32-bit address space. Namely, the MemoryBase and MemoryLimit fields in
PCI_BRIDGE_CONTROL_REGISTER have type UINT16, and based on the PCI-to-PCI
Bridge Architecture Spec, Chapter 3.2, the actual MMIO aperture is
determined as in:
NonPrefetchMemoryBase = (((MemoryBase & 0xFFF0u) >> 4) << 20) | 0x00000
NonPrefetchMemoryLimit = (((MemoryLimit & 0xFFF0u) >> 4) << 20) | 0xFFFFF
In "OvmfPkg/PciHotPlugInitDxe", the
"mPadding.MmioPadding.AddrSpaceGranularity" field is currently initialized
to 64. According to the above, this is useless generality: a
non-prefetchable MMIO reservation may only be satisfied from 32-bit
address space. Update the field to 32.
In practice this change makes no difference, because PciBusDxe already
enforces the 32-bit limitation when it sees "non-prefetchable" from
(SpecificFlag==0). Quoting commit 8aba40b792 ("OvmfPkg: add
PciHotPlugInitDxe", 2016-06-30): "regardless of our request for 64-bit
MMIO reservation, it is downgraded to 32-bit".
(See the Platform Init Spec 1.6, Volume 5,
- Table 8. "ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage", and
- Table 11. "Memory Resource Flag (Resource Type = 0) Usage",
for an explanation of the "mPadding.MmioPadding" fields.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The driver always produces an instance of the
EFI_PCI_HOT_PLUG_INIT_PROTOCOL. The "SOMETIMES_PRODUCES" remark is an
oversight from the original v1->v2 patch update; v2 should have stated
"ALWAYS_PRODUCES":
http://mid.mail-archive.com/1468242274-12686-5-git-send-email-lersek@redhat.com
> Notes:
> v2:
> - drop the PcdPciBusHotplugDeviceSupport check, and the PcdLib
> dependency with it [Jordan]
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QEMU has recently gained the ability to provide various hints about its
PCI bridges. The hints take the form of vendor-specific PCI capabilities.
Define macros and types under "OvmfPkg/Include/IndustryStandard" to
describe these capabilities.
The definitions correspond to "docs/pcie_pci_bridge.txt" in the QEMU tree.
Said documentation was added in the last commit of the following series:
a35fe226558a hw/pci: introduce pcie-pci-bridge device
70e1ee59bb94 hw/pci: introduce bridge-only vendor-specific capability to
provide some hints to firmware
226263fb5cda hw/pci: add QEMU-specific PCI capability to the Generic PCI
Express Root Port
c1800a162765 docs: update documentation considering PCIE-PCI bridge
We are going to parse the Resource Reservation Capability in
OvmfPkg/PciHotPlugInitDxe, and return the reservation requests to
PciBusDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The feature is primarily useful for modern AARCH64 guests that have no
built-in virtio block / SCSI drivers; as on "qemu-system-aarch64 -M virt",
there are no IDE or AHCI controllers that could be used as fallback. XHCI
is available in "-M virt" however, and because XHCI predates AARCH64 by
several years, said guests are expected to have built-in drivers for it.
Other device models ("usb-uas", "usb-bot") are out of scope for now,
similarly to USB1.x (UHCI) and USB2 (EHCI) host controllers, and similarly
to USB hubs (which are USB1.1 only). In particular, port mapping between
EHCI and companion UHCI controllers is very complex; it even leads to PCI
slot/function differences between the OpenFirmware device paths exported
by QEMU and the the UEFI device paths generated by edk2.
The number of ports on the XHCI controller defaults to 4, but it can be
raised via the "p3" property to 15. In addition, several XHCI controllers
can be grouped into a single-slot, multi-function PCI device. These allow
for a good number of usb-storage devices, while their desired boot order
remains recognizable to this patch.
In the example below, we create two XHCI controllers, grouped into PCI
slot 00:02 as functions 0 and 1. Both controllers are given 15 ports. We
attach a "usb-storage" device to controller 1 at port 3 (ports are 1-based
in QEMU, 0-based in edk2), and attach another "usb-storage" device to
controller 2 at port 9.
QEMU command line options (NB. they apply equally to aarch64/virt and
x86_64/{i440fx,q35}):
-device qemu-xhci,id=xhci1,p3=15,addr=02.0,multifunction=on \
-device qemu-xhci,id=xhci2,p3=15,addr=02.1 \
\
-drive id=disk1,if=none,format=qcow2,$DISK1_OPTIONS \
-drive id=disk2,if=none,format=qcow2,$DISK2_OPTIONS \
\
-device usb-storage,drive=disk1,bus=xhci1.0,port=3,bootindex=1 \
-device usb-storage,drive=disk2,bus=xhci2.0,port=9,bootindex=2 \
Libvirt domain XML fragment:
<controller type='usb' index='1' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x0'
multifunction='on'/>
</controller>
<controller type='usb' index='2' model='qemu-xhci' ports='15'>
<address type='pci'
domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
</controller>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sda' bus='usb'/>
<boot order='1'/>
<address type='usb' bus='1' port='3'/>
</disk>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='...'/>
<target dev='sdb' bus='usb'/>
<boot order='2'/>
<address type='usb' bus='2' port='9'/>
</disk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In commit db27e9f3d8 ("OvmfPkg/LegacyRegion: Support legacy region
manipulation of Q35", 2016-03-15), Ray extended the
OvmfPkg/Csm/CsmSupportLib PAM register manipulation to Q35. However, we
missed that the same should be done to the QemuVideoDxe VBE Shim as well.
The omission has caused no problems in practice on Q35, because QEMU has
let us write to the ROM area, regardless of the PAM1 setting, all this
time. This has now changed with recent QEMU commit 208fa0e43645 ("pc: make
'pc.rom' readonly when machine has PCI enabled", 2017-07-28). The QEMU
commit exposes the OVMF bug when Windows 7 is started on Q35, using QEMU
2.10 -- the VBE Shim is no longer put in place and Windows 7 cannot find
it.
To remedy this, assign the "Pam1Address" local variable a PciLib address
that matches the board type (i440fx vs. q35).
Regarding the PcdLib dependency: QemuVideoDxe already uses PcdLib, both
directly (see "PcdDriverSupportedEfiVersion") and indirectly (e.g. via the
DxePciLibI440FxQ35 PciLib instance). Add PcdLib to [LibraryClasses] for
completeness.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1715700
Reported-by: Aleksei Kovura <alex3kov@zoho.com>
Special-thanks-to: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This clarifies the purpose of the local variable in InstallVbeShim().
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1715700
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
* Introduce the PIIX4_PAM* and MCH_PAM* macros under
"OvmfPkg/Include/IndustryStandard". These macros capture the PAM
register offsets (in PCI config space) on the respective Memory
Controller B/D/F, from the respective data sheets.
* Under IndustryStandard, introduce the PMC_REGISTER_PIIX4() macro for
PIIX4. (For Q35, we already have DRAMC_REGISTER_Q35().) In both cases,
the B/D/F is 0/0/0.
* Under CsmSupportLib, replace the "PAMRegOffset" field (UINT8) in the
PAM_REGISTER_VALUE structure with "PAMRegPciLibAddress" (UINTN). The new
field contains the return value of the PCI_LIB_ADDRESS() macro.
* Under CsmSupportLib, replace the "mRegisterValues440" elements as
follows:
REG_PAMx_OFFSET_440, ReadEnableData, WriteEnableData
-->
PMC_REGISTER_PIIX4 (PIIX4_PAMx), ReadEnableData, WriteEnableData
* Under CsmSupportLib, replace the "mRegisterValuesQ35" elements as
follows:
REG_PAMx_OFFSET_Q35, ReadEnableData, WriteEnableData
-->
DRAMC_REGISTER_Q35 (MCH_PAMx), ReadEnableData, WriteEnableData
* Under CsmSupportLib, update the register address calculations as follows
(for all of PciOr8(), PciAnd8() and PciRead8()):
PCI_LIB_ADDRESS (
PAM_PCI_BUS,
PAM_PCI_DEV,
PAM_PCI_FUNC,
mRegisterValues[Index].PAMRegOffset
)
-->
mRegisterValues[Index].PAMRegPciLibAddress
* Under CsmSupportLib, remove the PAM_PCI_* and REG_PAM*_OFFSET_* macros.
Technically speaking, these changes could be split into three patches
(IndustryStandard macro additions, CsmSupportLib code updates,
CsmSupportLib macro removals). However, the patch is not big, and in this
case it is actually helpful to present the code movement / refactoring in
one step, for easier verification.
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1715700
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
VirtioNetDxe driver has been updated to use IOMMU-like member functions
from VIRTIO_DEVICE_PROTOCOL to translate the system physical address to
device address. We do not need to do anything special when
VIRTIO_F_IOMMU_PLATFORM bit is present hence treat it in parallel with
VIRTIO_F_VERSION_1.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, driver is require to pass the device
address of caller-supplied transmit buffer for the bus master operations.
The patch uses VirtioNetMapTxBuf() to map caller-supplied Tx packet to a
device-address and enqueue the device address in VRING for transfer and
perform the reverse mapping when transfer is completed so that we can
return the caller-supplied buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind IOMMU, driver is require to pass the device address
of TxBuf in the Tx VRING. The patch adds helper functions and data
structure to map and unmap the TxBuf system physical address to a device
address.
Since the TxBuf is returned back to caller from VirtioNetGetStatus() hence
we use OrderedCollection interface to save the TxBuf system physical to
device address mapping. After the TxBuf is succesfully transmitted
VirtioNetUnmapTxBuf() does the reverse lookup in OrderedCollection data
structure to get the system physical address of TxBuf for a given device
address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
In next patches we will update Virtio transmit to use the device-mapped
address of the caller-supplied packet. The patch documents the new model.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Each network packet is submitted for transmission by pushing the head
descriptor of a two-part descriptor chain to the Available Ring of the
TX queue. VirtioNetInitTx() sets up the the descriptor chains for all
queueable packets in advance, and points all the head descriptors to the
same shared, never modified, VIRTIO_1_0_NET_REQ header object (or its
initial VIRTIO_NET_REQ sub-object, dependent on virtio version).
VirtioNetInitTx() currently uses the header object's system physical
address for populating the head descriptors.
When device is behind the IOMMU, VirtioNet driver is required to provide
the device address of VIRTIO_1_0_NET_REQ header. In this patch we
dynamically allocate the header using AllocateSharedPages() and map with
BusMasterCommonBuffer so that header can be accessed by both processor
and the device.
We map the header object for CommonBuffer operation because, in order to
stick with the current code order, we populate the head descriptors with
the header's device address first, and fill in the header itself second.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU, VirtioNetDxe is required to use the
device address in bus master operations. RxBuf is allocated using
AllocatePool() which returns the system physical address.
The patch uses VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages() to allocate
the RxBuf and map with VirtioMapAllBytesInSharedBuffer() so that we can
obtain the device address for RxBuf.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When device is behind the IOMMU then driver need to pass the device
address when programing the bus master. The patch uses VirtioRingMap() to
map the VRING system physical address[es] to device address[es].
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When a UEFI_DRIVER attempts to open a protocol interface with BY_DRIVER
attribute that it already has open with BY_DRIVER attribute,
OpenProtocol() returns EFI_ALREADY_STARTED. This is not an error. The
UEFI-2.7 spec currently says,
> EFI_ALREADY_STARTED -- Attributes is BY_DRIVER and there is an item on
> the open list with an attribute of BY_DRIVER
> whose agent handle is the same as AgentHandle.
(In fact it is so much an expected condition that recent USWG Mantis
ticket <https://mantis.uefi.org/mantis/view.php?id=1815> will codify its
additional edk2-specific behavior, namely to output the protocol interface
at once.)
Downgrade the log mask for this one condition to DEBUG_INFO, in
SataControllerStart(). This will match the log mask of the other two
informative messages in this function, "SataControllerStart START", and
"SataControllerStart END status = %r" (at which point Status can only be
EFI_SUCCESS).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
"Boot Mode:%x" is an informative message, not an error report. Set its
debug mask to DEBUG_INFO.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
"Platform PEIM Loaded" is an informative message, not an error report. Set
its debug mask to DEBUG_INFO.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Since commit 19c6d9feaa ("MdePkg: Expand BaseIoLibIntrinsic (IoLib
class) library", 2017-01-14), IoWriteFifo8() has been widely available to
modules. Use it to print debug messages and assertion failures to the QEMU
debug port, rather than open-coded loops.
In the general case this speeds up logging, because debug messages will
now trap to QEMU once per message (as opposed to once per character), due
to "REP OUTSB" in "MdePkg/Library/BaseIoLibIntrinsic/*/IoFifoSev.nasm".
In SEV guests, there is no speedup (SEV doesn't support the REP prefix).
SEV is detected internally to BaseIoLibIntrinsic.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
This patch enables UDF file system support by default.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Register an ExitBootServices() callback that tears down all IOMMU
mappings, without modifying the UEFI memory map.
The trick is that in the ExitBootServices() callback, we don't immediately
do the work; instead we signal another (private) event.
Normally the dispatch order of ExitBootServices() callbacks is unspecified
(within the same task priority level anyway). By queueing another
function, we delay the unmapping until after all PciIo and Virtio drivers
abort -- in their own ExitBootServices() callbacks -- the pending DMA
operations of their respective controllers.
Furthermore, the fact that IoMmuUnmapWorker() rewrites client-owned memory
when it unmaps a Write or CommonBuffer bus master operation, is safe even
in this context. The existence of any given "MapInfo" in "mMapInfos"
implies that the client buffer pointed-to by "MapInfo->CryptedAddress" was
live when ExitBootServices() was entered. And, after entering
ExitBootServices(), nothing must have changed the UEFI memory map, hence
the client buffer at "MapInfo->CryptedAddress" still exists.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
IoMmuUnmapWorker() is identical to IoMmuUnmap(), it just takes an
additional BOOLEAN parameter called "MemoryMapLocked". If the memory map
is locked, IoMmuUnmapWorker() does its usual job, but it purposely leaks
memory rather than freeing it. This makes it callable from
ExitBootServices() context.
Turn IoMmuUnmap() into a thin wrapper around IoMmuUnmapWorker() that
passes constant FALSE for "MemoryMapLocked".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The "mRecycledMapInfos" list implements an internal pool of unused
MAP_INFO structures between the IoMmuUnmap() and IoMmuMap() functions. The
original goal was to allow IoMmuUnmap() to tear down CommonBuffer mappings
without releasing any memory: IoMmuUnmap() would recycle the MAP_INFO
structure to the list, and IoMmuMap() would always check the list first,
before allocating a brand new MAP_INFO structure.
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
For this, rename and repurpose the list to track all live mappings.
This means that IoMmuUnmap() will always release a MAP_INFO structure
(even when cleaning up a CommonBuffer operation). That's fine (for now),
because device drivers are no longer expected to call Unmap() in their
ExitBootServices() notification functions.
In theory, we could also move the allocation and freeing of the stash
buffer from IoMmuAllocateBuffer() and IoMmuFreeBuffer(), respectively, to
IoMmuMap() and IoMmuUnmap(). However, this would require allocating and
freeing a stash buffer in *both* IoMmuMap() and IoMmuUnmap(), as
IoMmuMap() performs in-place decryption for CommonBuffer operations, and
IoMmuUnmap() performs in-place encryption for the same.
By keeping the stash buffer allocation as-is, not only do we keep the code
almost fully undisturbed, but
- we also continue to guarantee that IoMmuUnmap() succeeds: allocating a
stash buffer in IoMmuUnmap(), for in-place encryption after a
CommonBuffer operation, could fail;
- we also keep IoMmuUnmap() largely reusable for ExitBootServices()
callback context: allocating a stash buffer in IoMmuUnmap() would simply
be forbidden in that context.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioScsiExitBoot(),
originally added in commit fc2168feb2 ("OvmfPkg/VirtioScsiDxe: map VRING
using VirtioRingMap()", 2017-08-31).
Add a DEBUG message so we can observe the ordering between
VirtioScsiExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioRngExitBoot(),
originally added in commit 0a568ccbcb ("OvmfPkg/VirtioRngDxe: map host
address to device address", 2017-08-23).
Add a DEBUG message so we can observe the ordering between
VirtioRngExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() calls from VirtioGpuExitBoot(),
originally added in commit 9bc5026c19 ("OvmfPkg/VirtioGpuDxe: map VRING
for bus master common buffer operation", 2017-08-26) and commit
f10ae92366 ("OvmfPkg/VirtioGpuDxe: map backing store to bus master
device address", 2017-08-26).
Add a DEBUG message so we can observe the ordering between
VirtioGpuExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In one of the following patches, we'll change OvmfPkg/IoMmuDxe so that it
unmaps all existent bus master operations (CommonBuffer, Read, Write) at
ExitBootServices(), strictly after the individual device drivers abort
pending DMA on the devices they manage, in their own ExitBootServices()
notification functions.
In preparation, remove the explicit
VIRTIO_DEVICE_PROTOCOL.UnmapSharedBuffer() call from VirtioBlkExitBoot(),
originally added in commit 1916513047 ("OvmfPkg/VirtioBlkDxe: map VRING
using VirtioRingMap()", 2017-08-27).
Add a DEBUG message so we can observe the ordering between
VirtioBlkExitBoot() and the upcoming cleanup of mappings in
OvmfPkg/IoMmuDxe.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
In earlier PEI stage, temporary memory at PcdOvmfSecPeiTempRamBase is
employed as stack and heap. We move them to the new room and do some
relocation fixup when permanent memory becomes available.
TemporaryRamMigration() is responsible for switching the stack.
Before entering TemporaryRamMigration(), Ebp/Rbp is populated with the
content of Esp/Rsp and used as frame pointer.
After the execution of SetJump/LongJump, stack migrates to new position
while the context keeps unchanged.
But when TemporaryRamMigration() exits, Esp/Rsp is filled with
the content of Ebp/Rbp to destroy this stack frame.
The result is, stack switches back to previous temporary memory.
When permanent memory becomes available, modules that have registered
themselves for shadowing will be scheduled to execute. Some of them
need to consume more memory(heap/stack). Contrast to temporary stack,
permanent stack possesses larger space.
The potential risk is overflowing the stack if stack staying in
temporary memory. When it happens, system may crash during S3 resume.
More detailed information:
> (gdb) disassemble /r
> Dump of assembler code for function TemporaryRamMigration:
> 0x00000000fffcd29c <+0>: 55 push %rbp
> 0x00000000fffcd29d <+1>: 48 89 e5 mov %rsp,%rbp
> 0x00000000fffcd2a0 <+4>: 48 81 ec 70 01 00 00 sub
> $0x170,%rsp
> ...
> ...
> 0x00000000fffcd425 <+393>: e8 80 10 00 00 callq 0xfffce4aa
> <SaveAndSetDebugTimerInterrupt>
> => 0x00000000fffcd42a <+398>: b8 00 00 00 00 mov $0x0,%eax
> 0x00000000fffcd42f <+403>: c9 leaveq
> 0x00000000fffcd430 <+404>: c3 retq
> End of assembler dump.
See the description of leave(opcode: c9), from
Intel 64 and IA-32 Architectures Software Developer's Manual, Volume 2A
"Releases the stack frame set up by an earlier ENTER instruction. The
LEAVE instruction copies the frame pointer (in the EBP register) into
the stack pointer register (ESP), which releases the stack space
allocated to the stack frame. The old frame pointer (the frame pointer
for the calling procedure that was saved by the ENTER instruction) is
then popped from the stack into the EBP register, restoring the calling
procedure’s stack frame."
To solve this, update Ebp/Rbp too when Esp/Rsp is updated
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ge Song <ge.song@hxt-semitech.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
VirtioGpuDxe is now IOMMU-clean; it translates system memory addresses to
bus master device addresses. Negotiate VIRTIO_F_IOMMU_PLATFORM in parallel
with VIRTIO_F_VERSION_1. (Note: the VirtIo GPU device, and this driver,
are virtio-1.0 only (a.k.a. "modern-only").)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
VirtioGpuDxe is a UEFI Bus driver (not a Device driver). This is because a
UEFI graphics driver is expected to produce its GraphicsOutput protocol
instance(s) on new child handle(s) of the video controller handle, one
child handle (plus GOP) per video output (or, one child handle plus GOP
per combination of multiple video outputs).
In VirtioGpuDxe, we support a single VirtIo GPU head (scanout), namely
head#0. This means that, with regard to a specific VirtIo GPU device, the
driver may be in one of three states, at any time:
[1] VirtioGpuDxe has not bound the device at all,
[2] VirtioGpuDxe has bound the device, but not produced the sole child
handle for head#0,
[3] VirtioGpuDxe has bound the device, and produced the sole child handle
for head#0, with a GOP instance on the child handle.
(Which state the driver is in wrt. a given VirtIo GPU device depends on
the VirtioGpuDriverBindingStart() / VirtioGpuDriverBindingStop()
invocations issued by the ConnectController() / DisconnectController()
boot services. In turn those come from BDS or e.g. the UEFI shell.)
The concept of "current video mode" is technically tied to the GOP (i.e.,
the child handle, state [3] only), not the VirtIo GPU controller handle.
This is why we manage the storage that backs the current video mode in our
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() member implementation.
GopSetMode() is first called *internally*, when we enter state [3] (that
is, when we produce the child handle + GOP on it):
VirtioGpuDriverBindingStart() [DriverBinding.c]
InitVgpuGop() [DriverBinding.c]
VgpuGop->Gop.SetMode() [Gop.c]
When this happens, we allocate the backing store *without* having a
preexistent backing store (due to no preexistent video mode and GOP).
Skipping VirtIo GPU details not relevant for this patch, we just note that
the backing store is exposed *permanently* to the VirtIo GPU device, with
the RESOURCE_ATTACH_BACKING command.
When external clients call the EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() member
function -- called GopBlt() in this driver --, in state [3], the function
operates on the backing store, and sends only small messages to the VirtIo
GPU device.
When external clients call GopSetMode() for switching between video modes
-- in state [3] --, then
- a new backing store is allocated and exposed to the device (attached to
a new host-side VirtIo GPU resource),
- head#0 is flipped to the new backing store,
- on success, the ReleaseGopResources() function both detaches the
previous backing store from the VirtIo GPU device, an releases it. The
new backing store address and size are saved in our GOP object. (In
other words, we "commit" to the new video mode.)
When the DisconnectController() boot service asks us to leave state [3] --
we can leave it directly only for state [2] --, then the
ReleaseGopResources() function is called on a different path:
VirtioGpuDriverBindingStop() [DriverBinding.c]
UninitVgpuGop() [DriverBinding.c]
ReleaseGopResources() [Gop.c]
In this case, the backing store being released is still in use (we're not
leaving it for a new mode -- head#0 has not been flipped "away" from it),
so in ReleaseGopResources() we disable head#0 first.
(The ReleaseGopResources() function is called the same way on the error
path in InitVgpuGop(), if the first -- internal -- VgpuGop->Gop.SetMode()
call succeeds, but the rest of InitVgpuGop() fails.)
Based on the above, for IOMMU-compatibility,
- in GopSetMode(), don't just allocate, but also map the backing store of
the nascent video mode to a device address, for bus master common buffer
operation,
- (the VirtioGpuAllocateZeroAndMapBackingStore() helper function
introduced in the last patch takes care of zeroing internally,)
- pass the device address to the VirtIo GPU device in the
RESOURCE_ATTACH_BACKING command,
- if GopSetMode() succeeds, save the mapping token,
- if GopSetMode() fails, don't just free but also unmap the still-born
backing store,
- in ReleaseGopResources(), don't just free but also unmap the backing
store -- which is the previous backing store if we're mode-switching,
and the current backing store if we're leaving state [3].
Finally, ExitBootServices() may be called when the driver is in either
state [1], [2] or [3], wrt. a given VirtIo GPU device. (Of course we are
only notified in states [2] and [3].) If we get the notification in state
[3], then the current video mode's backing store has to be unmapped, but
not released. (We must not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Introduce the VirtioGpuAllocateZeroAndMapBackingStore() and
VirtioGpuUnmapAndFreeBackingStore() helper functions. These functions tie
together the allocation, zeroing and mapping, and unmapping and
deallocation, respectively, of memory that the virtio GPU will permanently
reference after receiving the RESOURCE_ATTACH_BACKING command.
With these functions we can keep the next patch simpler -- the GOP
implementation in "Gop.c" retains its error handling structure, and
remains oblivious to VIRTIO_DEVICE_PROTOCOL and VirtioLib.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The RESOURCE_ATTACH_BACKING virtio GPU command assigns guest-side backing
pages to a host-side resource that was created earlier with the
RESOURCE_CREATE_2D command.
We compose the RESOURCE_ATTACH_BACKING command in the
VirtioGpuResourceAttachBacking() function. Currently this function takes
the parameter
IN VOID *FirstBackingPage
This is only appropriate as long as we pass a (guest-phys) system memory
address to the device. In preparation for a mapped bus master device
address, change the above parameter to
IN EFI_PHYSICAL_ADDRESS BackingStoreDeviceAddress
In order to keep the current call site functional, move the (VOID*) to
(UINTN) conversion out of the function, to the call site.
The "Request.Entry.Addr" field already has type UINT64.
This patch is similar to commit 4b725858de ("OvmfPkg/VirtioLib: change
the parameter of VirtioAppendDesc() to UINT64", 2017-08-23).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Every virtio GPU command used by VirtioGpuDxe is synchronous and formatted
as a two-descriptor chain: request, response. The internal workhorse
function that all the command-specific functions call for such messaging
is VirtioGpuSendCommand().
In VirtioGpuSendCommand(), map the request from system memory to bus
master device address for BusMasterRead operation, and map the response
from system memory to bus master device address for BusMasterWrite
operation.
Pass the bus master device addresses to VirtioAppendDesc(). (See also
commit 4b725858de, "OvmfPkg/VirtioLib: change the parameter of
VirtioAppendDesc() to UINT64", 2017-08-23.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
VirtioGpuDxe uses one virtio ring, for VIRTIO_GPU_CONTROL_QUEUE.
Map it for bus master common buffer operation with VirtioRingMap(), so
that it can be accessed equally by both guest and hypervisor even if an
IOMMU is used. (VirtioRingInit() already allocates the ring suitably for
this, see commit b0338c5329, "OvmfPkg/VirtioLib: alloc VRING buffer with
AllocateSharedPages()", 2017-08-23).
Pass the resultant translation offset ("RingBaseShift"), from system
memory address to bus master device address, to VIRTIO_SET_QUEUE_ADDRESS.
Unmap the ring in all contexts where the ring becomes unused (these
contexts are mutually exclusive):
- in VirtioGpuInit(): the ring has been mapped, but we cannot complete the
virtio initialization for another reason,
- in VirtioGpuUninit(): the virtio initialization has succeeded, but
VirtioGpuDriverBindingStart() fails for another reason, or
VirtioGpuDriverBindingStop() unbinds the device after use,
- in VirtioGpuExitBoot(): ExitBootServices() is called after
VirtioGpuDriverBindingStart() has successfully bound the device.
(Unmapping the ring does not change the UEFI memory map.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN parameters on entry. (There are only IN parameters.)
Beautify the format string.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Log all relevant IN and IN OUT parameters on entry.
(Note that the HostAddress parameter is IN OUT rather than OUT due to
historical reasons. The "IN EFI_ALLOCATE_TYPE Type" parameter is now to be
ignored, but historically it could be set to AllocateMaxAddress for
example, and for that HostAddress had to be IN OUT.)
When exiting with success, log all relevant OUT parameters (i.e.,
HostAddress). Also log the new (internal) StashBuffer address, on which
IoMmuMap() and IoMmuUnmap() rely on, for BusMasterCommonBuffer operations
(in-place decryption and encryption, respectively).
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
The only important external information for this function, and for the
human looking at the log, is the Mapping input parameter. Log it on entry.
Stop logging the contents of the MAP_INFO structure pointed-to by Mapping.
Thanks to the previous patch, we can now associate IoMmuUnmap() messages
with IoMmuMap() messages -- and thereby with MAP_INFO contents -- purely
via Mapping.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Eric Dong
Rebecca Cran
Imran Desai
Laszlo Ersek
Gary Lin
Anthony PERARD
David Woodhouse
Hao A Wu
Marc W Chen
Fu Siyuan
Zhang, Shenglei
Michael D Kinney
Igor Druzhinin
Zhichao Gao
Bret Barkelew
Jordan Justen
Stefan Berger
Ard Biesheuvel
Star Zeng
Liming Gao
yuchenlin
Marc-André Lureau
Ruiyu Ni
Brijesh Singh
chenc2
Gerd Hoffmann
Dandan Bi
Heyi Guo
Paolo Bonzini
Jian J Wang
Paulo Alcantara
Ge Song