Extend parameter list of PciHostBridgeUtilityGetRootBridges() with BusMin/
BusMax, so that the utility function could be compatible with ArmVirtPkg
who uses mutable bus range [BusMin, BusMax] insteand of [0, PCI_MAX_BUS].
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210119011302.10908-10-cenjiahui@huawei.com>
[lersek@redhat.com: fix logging of UINTN values BusMin, BusMax]
[lersek@redhat.com: keep zeroing of (*Count) centralized]
[lersek@redhat.com: fix typos in ExtraRootBridges comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to be able to issue messages or make interface calls that cause
another #VC (e.g. GetLocalApicBaseAddress () issues RDMSR), add support
for nested #VCs.
In order to support nested #VCs, GHCB backup pages are required. If a #VC
is received while currently processing a #VC, a backup of the current GHCB
content is made. This allows the #VC handler to continue processing the
new #VC. Upon completion of the new #VC, the GHCB is restored from the
backup page. The #VC recursion level is tracked in the per-vCPU variable
area.
Support is added to handle up to one nested #VC (or two #VCs total). If
a second nested #VC is encountered, an ASSERT will be issued and the vCPU
will enter CpuDeadLoop ().
For SEC, the GHCB backup pages are reserved in the OvmfPkgX64.fdf memory
layout, with two new fixed PCDs to provide the address and size of the
backup area.
For PEI/DXE, the GHCB backup pages are allocated as boot services pages
using the memory allocation library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <ac2e8203fc41a351b43f60d68bdad6b57c4fb106.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Update the MemEncryptSevLib library to include an interface that can
report the encryption state on a range of memory. The values will
represent the range as being unencrypted, encrypted, a mix of unencrypted
and encrypted, and error (e.g. ranges that aren't mapped).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0d98f4d42a2b67310c29bac7bcdcf1eda6835847.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
To ensure that we always use a validated encryption mask for an SEV-ES
guest, create a new interface in the MemEncryptSevLib library to return
the encryption mask. This can be used in place of the multiple locations
where CPUID is used to retrieve the value (which would require validation
again) and allows the validated mask to be returned.
The PEI phase will use the value from the SEV-ES work area. Since the
SEV-ES work area isn't valid in the DXE phase, the DXE phase will use the
PcdPteMemoryEncryptionAddressOrMask PCD which is set during PEI.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e12044dc01b21e6fc2e9535760ddf3a38a142a71.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
The early assembler code performs validation for some of the SEV-related
information, specifically the encryption bit position. To avoid having to
re-validate the encryption bit position as the system proceeds through its
boot phases, save the validated encryption bit position in the SEV-ES work
area for use by later phases.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <2609724859cf21f0c6d45bc323e94465dca4e621.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
To help mitigate against ROP attacks, add some checks to validate the
encryption bit position that is reported by the hypervisor.
The first check is to ensure that the hypervisor reports a bit position
above bit 31. After extracting the encryption bit position from the CPUID
information, the code checks that the value is above 31. If the value is
not above 31, then the bit position is not valid, so the code enters a
HLT loop.
The second check is specific to SEV-ES guests and is a two step process.
The first step will obtain random data using RDRAND and store that data to
memory before paging is enabled. When paging is not enabled, all writes to
memory are encrypted. The random data is maintained in registers, which
are protected. The second step is that, after enabling paging, the random
data in memory is compared to the register contents. If they don't match,
then the reported bit position is not valid, so the code enters a HLT
loop.
The third check is after switching to 64-bit long mode. Use the fact that
instruction fetches are automatically decrypted, while a memory fetch is
decrypted only if the encryption bit is set in the page table. By
comparing the bytes of an instruction fetch against a memory read of that
same instruction, the encryption bit position can be validated. If the
compare is not equal, then SEV/SEV-ES is active but the reported bit
position is not valid, so the code enters a HLT loop.
To keep the changes local to the OvmfPkg, an OvmfPkg version of the
Flat32ToFlat64.asm file has been created based on the UefiCpuPkg file
UefiCpuPkg/ResetVector/Vtf0/Ia32/Flat32ToFlat64.asm.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <cb9c5ab23ab02096cd964ed64115046cc706ce67.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to allow for the SEV-ES workarea to be used for other purposes
and by other files, move the definition into the BaseMemEncryptSevLib
header file, MemEncryptSevLib.h.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <07d66f3384bd54da97d540e89b9f3473a6d17231.1610045305.git.thomas.lendacky@amd.com>
Add the VirtioFsFuseWrite() function, for sending the FUSE_WRITE command
to the Virtio Filesystem device.
(For avoiding oversized FUSE_WRITE commands, save the maximum write buffer
size that is advertized by the FUSE server, in the session init code.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-39-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsFuseReadFileOrDir() function, for sending the FUSE_READ or
FUSE_READDIRPLUS command to the Virtio Filesystem device.
Parsing the structured FUSE_READDIRPLUS output is complex, and cannot be
integrated into the wrapper function. Given that fact, FUSE_READ and
FUSE_READDIRPLUS turn out to need identical low-level handling, except for
the opcode. Hence the shared wrapper function.
(It's prudent to verify whether the FUSE server supports FUSE_READDIRPLUS,
so update the session init code accordingly.)
This is the first FUSE request wrapper function that deals with a variable
size tail buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-33-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The FUSE_UNLINK and FUSE_RMDIR commands only differ in the opcode. Add a
common function for wrapping both.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-25-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VirtioFsFuseAttrToEfiFileInfo() function, for converting
FUSE inode attributes to EFI_FILE_INFO.
The EpochToEfiTime() function from EmbeddedPkg's TimeBaseLib proves
invaluable for converting the file access times.
This is the first time we consume TimeBaseLib in OvmfPkg, so add the
necessary lib class resolution. We need not modify any ArmVirtPkg DSC
files: see commit af5fed90bf ("ArmPlatformPkg,ArmVirtPkg: delete
redundant PL031 functions", 2017-05-10).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-22-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The FUSE_FSYNC and FUSE_FSYNCDIR commands only differ in the opcode. Add a
common function for wrapping both.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-14-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsFuseForget() function, for sending the FUSE_FORGET command
to the Virtio Filesystem device.
This is an unusual command in that it doesn't generate any response from
the FUSE server.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-13-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
With the help of the VirtioFsFuseOpenDir() and
VirtioFsFuseReleaseFileOrDir() functions introduced previously, we can now
open and close the root directory. So let's implement
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume().
OpenVolume() creates a new EFI_FILE_PROTOCOL object -- a reference to the
root directory of the filesystem. Thus, we have to start tracking
references to EFI_SIMPLE_FILE_SYSTEM_PROTOCOL, lest we unbind the
virtio-fs device while files are open.
There are two methods that release an EFI_FILE_PROTOCOL object: the
Close() and the Delete() member functions. In particular, they are not
allowed to fail with regard to resource management -- they must release
resources unconditionally. Thus, for rolling back the resource accounting
that we do in EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume(), we have to
implement the first versions of EFI_FILE_PROTOCOL.Close() and
EFI_FILE_PROTOCOL.Delete() in this patch as well.
With this patch applied, the UEFI shell can enter the root directory of
the Virtio Filesystem (such as with the "FS3:" shell command), and the
"DIR" shell command exercises FUSE_OPENDIR and FUSE_RELEASEDIR, according
to the virtiofsd log. The "DIR" command reports the root directory as if
it were empty; probably because at this time, we only allow the shell to
open and to close the root directory, but not to read it.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-12-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The FUSE_RELEASE and FUSE_RELEASEDIR commands only differ in the opcode.
Add a common function called VirtioFsFuseReleaseFileOrDir() for sending
either command.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-11-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Submit the FUSE_INIT request to the Virtio Filesystem device, for starting
the FUSE session.
The FUSE_INIT request is logged by the virtio-fs daemon, with this patch
applied, when (for example) using the "CONNECT" UEFI shell command.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-9-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VIRTIO_FS_FUSE_REQUEST and VIRTIO_FS_FUSE_RESPONSE
structures, which are the common headers for the various FUSE
request/response structures.
Introduce the VirtioFsFuseNewRequest() helper function for populating
VIRTIO_FS_FUSE_REQUEST, from parameters and from a VIRTIO_FS-level request
counter.
Introduce the VirtioFsFuseCheckResponse() helper function for verifying
most FUSE response types that begin with the VIRTIO_FS_FUSE_RESPONSE
header.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-7-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsInit(), VirtioFsUninit(), and VirtioFsExitBoot()
functions.
In VirtioFsInit():
- Verify the host-side config of the virtio-fs device.
- Save the filesystem label ("tag") for later, from the configuration area
of the virtio-fs device.
- Save the virtio queue size for later as well.
- Set up the virtio ring for sending requests.
In VirtioFsUninit():
- Reset the device.
- Tear down the virtio ring.
In VirtioFsExitBoot():
- Reset the device.
With this patch, the UEFI connect / disconnect controller operations
involve virtio setup / teardown; they are visible in the virtio-fs
daemon's log file. The virtiofsd log also confirms the device reset in
VirtioFsExitBoot(), when an OS is booted while the virtio-fs device is
bound.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Complete the Supported, Start, and Stop member functions of
EFI_DRIVER_BINDING_PROTOCOL sufficiently for exercising the UEFI driver
model:
- bind virtio-fs devices,
- produce placeholder EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
On the "TO_START" (= Virtio) side, the VirtioFsBindingSupported() function
verifies the Virtio subsystem ID for the virtio-fs device (decimal 26 --
see
<https://github.com/oasis-tcs/virtio-spec/blob/87fa6b5d8155/virtio-fs.tex>).
Beyond that, no actual Virtio setup is performed for now. Those bits are
going to be implemented later in this series.
On the "BY_START" (= UEFI filesystem) side, the VirtioFsOpenVolume()
function -- which is the sole EFI_SIMPLE_FILE_SYSTEM_PROTOCOL member
function -- is a stub; it always returns EFI_NO_MEDIA, for now.
The "CONNECT", "DISCONNECT", and "MAP -R" UEFI Shell commands can be used
to test this patch.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
It is anticipated that this part of the code will work for both Intel
TDX and AMD SEV, so remove the SEV specific naming and change to
ConfidentialComputing as a more architecture neutral prefix. Apart
from the symbol rename, there are no code changes.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Message-Id: <20201216014146.2229-3-jejb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Although the SEV secret location must always be below 4GB, the same is
not necessarily true for Intel TDX, so change the configuration table
to contain a pair of UINT64 parameters instead of UINT32 so that any X64
location can be represented.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Message-Id: <20201216014146.2229-2-jejb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that the secret area is protected by a boot time HOB, extract its
location details into a configuration table referenced by
gSevLaunchSecretGuid so the boot loader or OS can locate it before a
call to ExitBootServices().
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201130202819.3910-7-jejb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
[lersek@redhat.com: fix indentation of InstallConfigurationTable() args]
There were some problems with the formatting and style that made the
file difficult to read.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-5-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Create a function that can be used to determine if the VM is running
as an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Sean reports that having two DEC files under OvmfPkg violates the DEC
spec:
> An EDK II Package (directory) is a directory that contains an EDK II
> package declaration (DEC) file. Only one DEC file is permitted per
> directory. EDK II Packages cannot be nested within other EDK II
> Packages.
This issue originates from commit 656419f922 ("Add BhyvePkg, to support
the bhyve hypervisor", 2020-07-31).
Remedy the problem as follows. (Note that these steps are not split to
multiple patches in order to keep Bhyve buildable across the transition.)
(1) Delete "OvmfPkg/Bhyve/BhyvePkg.dec".
(2) Point the [Packages] sections of the Bhyve-specific AcpiPlatformDxe,
BhyveRfbDxe, and BhyveFwCtlLib INF files to "OvmfPkg.dec".
(3) Migrate the artifacts that "BhyvePkg.dec" used to have on top of
"OvmfPkg.dec" as follows:
(3a) Merge the copyright notices from Rebecca Cran and Pluribus Networks
into "OvmfPkg.dec".
(3b) Merge the "BhyveFwCtlLib" class header definition into "OvmfPkg.dec".
(3c) Merge value 0x2F8 for the fixed PcdDebugIoPort into
"BhyvePkgX64.dsc".
(4) Unnest the the Include/Library/ and Library/ subtrees from under
OvmfPkg/Bhyve to the corresponding, preexistent subtrees in OvmfPkg.
The goal is to keep the [Includes] section in the "OvmfPkg.dec" file
unchanged, plus simplify references in "BhyvePkgX64.dsc". Non-library
modules remain under "OvmfPkg/Bhyve/".
(4a) The BhyveFwCtlLib class header, and sole instance, are already
uniquely named, so their movements need not involve file renames.
(4b) Rename the Bhyve-specific PlatformBootManagerLib instance to
PlatformBootManagerLibBhyve, in additon to moving it, for
distinguishing it from OvmfPkg's preexistent lib instance. Apply the
name change to all three of the lib instance directory name, the INF
file, and the BASE_NAME define in the INF file.
(4c) Update lib class resolutions in "BhyvePkgX64.dsc" accordingly.
(5) Replace the "ACPI table storage" FILE_GUID in
"OvmfPkg/Bhyve/AcpiTables/AcpiTables.inf" with a new GUID, and
open-code the "ACPI table storage" GUID in the "ACPITABLE" FDF rule
instead, replacing $(NAMED_GUID). This step is necessary because CI
requires unique FILE_GUIDs over all INF files, and OVMF's original
"AcpiTables.inf" already uses the "ACPI table storage" GUID as
FILE_GUID.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sean Brogan <spbrogan@outlook.com>
Fixes: 656419f922
Reported-by: Sean Brogan <spbrogan@outlook.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200801155024.16439-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.
v3:
- Set DStat, SIst0, and SIst1 to 0 before using them
- Amend the if statements for the DMA data instruction and add the
assertions for the data direction
- Also set SenseDataLength to 0 on the error path
- Fix typos and amend comments
- Amend the error handling of the calculation of transferred bytes
v2:
- Use the BITx macros for the most of LSI_* constants
- Fix a typo: contorller => controller
- Add SeaBIOS lsi-scsi driver as one of the references of the script
- Cast the result of sizeof to UINT32 for the instructions of the
script
- Drop the backslashes
- Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
already removed DUAL_ADDRESS_CYCLE
- Add more comments for the script
- Fix the check of the script size at the end of the script
- Always set SenseDataLength to 0 to avoid the caller to access
SenseData
- Improve the error handling in LsiScsiProcessRequest()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-8-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement LsiScsiControllerSupported() to probe the PCI ID and look for
LSI 53C895A.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-5-glin@suse.com>
Machines should be able to boot after this commit. Tested with different
Linux distributions (Ubuntu, CentOS) and different Windows
versions (Windows 7, Windows 10, Server 2016).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200504210607.144434-12-nikita.leshchenko@oracle.com>
[lersek@redhat.com: MPT_SCSI_DMA_ADDR_HIGH: drop redundant space char]
Reset and send the IO controller initialization request. The reply is
read back to complete the doorbell function but it isn't useful to us
because it doesn't contain relevant data or status codes.
See "LSI53C1030 PCI-X to Dual Channel Ultra320 SCSI Multifunction
Controller" technical manual for more information.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Message-Id: <20200504210607.144434-11-nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The MptScsiControllerSupported function is called on handles passed in
by the ConnectController() boot service and if the handle is the
lsi53c1030 controller the function would return success. A successful
return value will attach our driver to the device.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200504210607.144434-5-nikita.leshchenko@oracle.com>
Jiahui Cen via groups.io
Tom Lendacky
Laszlo Ersek
James Bottomley
Rebecca Cran
Michael D Kinney
Gary Lin
Nikita Leshenko