Juno has several serial ports, one of which may be used for a remote
debug interface (e.g. gdb, WinDbg). The debug serial port needs to
be distinct from that used for UEFI trace to prevent corruption of
debugger protocol messaging.
The UEFI spec requires that serial devices be initialised to default
settings. (11.8 Serial I/O Protocol - "The default attributes for all
UART-style serial device interfaces are: 115,200 baud, ..."
and 17.3.3 EFI Debugport Variable - "These defaults must be used in the
absence of a DEBUGPORT variable...")
This change adds initialization of the serial device reported in the
ACPI DBG2 table. The initialisation is done early in the boot to allow
the possibility of remote debug of UEFI itself.
NOTE: This is functionally dependent on the DBG2 table being updated in
OpenPlatformPkg, but is required as a precursor to that change.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The PCI related PCDs are not platform specific, and architectural
protocols such as CpuIo2 are based on PCI provided MMIO to IO
translation, so these PCDs belong in ArmPkg not ArmPlatformPkg.
NOTE: this *WILL* break some out-of-tree platforms, the fix is changing
all consumers of gArmPlatformTokenSpaceGuid.PcdPci* to
gArmTokenSpaceGuid.PcdPci*
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This patch adds a PCD for the PL011 UART Interrupt as this is needed by
the Serial Port Console Redirection Table.
Code at: 68f26f23a2
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This retypes some stack base PCD as 64-bit, and fixes up a number of references
to 64-bit PCDs (including the retypes ones), to use the correct PcdGet64()
accessors. Note that, in the case of FixedPcdGet64, this does not actually
caused any problems, since that resolves to an immediate value. But the
generic PcdGetxx accessors should be typed according to the size of the PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
[ard.biesheuvel: fixed up some instances in the 32-bit ARM code]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that we removed all references to the ArmGlobalVariable definitions
in the various lowlevel PrePi and PrePeiCore init routines, and removed
the PPI and HOB references from PlatformPeim, it is time to say goodbye
to ArmGlobalVariable. So remove the includes and the .DEC declarations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19003 6f19259b-4bc3-4df7-8a09-765794883524
This removes the PeiServicesTablePointerLib implementation under
ArmPlatformPkg that violates the PI spec, and hence should not be
used. Instead, the implementation that resides under ArmPkg should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18989 6f19259b-4bc3-4df7-8a09-765794883524
This updates the PrePiHobListPointerLib implementation in ArmPlatformPkg
to move away from ArmPlatformGlobalVariableLib and instead use the thread
ID CPU registers (TPIDRURW and TPIDR_EL0 for v7 and v8, respectively)
for storing the HobList pointer.
Since PrePiHobListPointerLib is specific to PrePi (where PEI core is skipped)
we can share these registers with the PEI services table pointer. By the
same reasoning, the PEI services table pointer and the HobList pointer
already shared the same offset in the ArmPlatformGlobalVariable array.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18982 6f19259b-4bc3-4df7-8a09-765794883524
When PcdBdsLinuxSupport is enabled, users can create boot
entries for the legacy EFI Linux loader.
The ARM BDS detects if the image is a EFI image if not
then it assumes it is a legacy Linux kernel (a kernel
without EFI Stub).
If the Boot Manager did not manage to load the binary
(it could happen when the binary is on the network or
not present on the media yet).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17974 6f19259b-4bc3-4df7-8a09-765794883524
The Linux Loader has been removed from ARM BDS. These PCDs
are not needed anymore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17973 6f19259b-4bc3-4df7-8a09-765794883524
Remove gVariableAuthenticatedRuntimeDxeFileGuid definition in
ArmPlatformPkg.dec and use gVariableRuntimeDxeFileGuid in
NorFlashAuthenticatedDxe.inf as auth Variable driver in SecurityPkg
and Variable driver in MdeModulePkg have been merged.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17768 6f19259b-4bc3-4df7-8a09-765794883524
... since gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut has recently
been introduced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17443 6f19259b-4bc3-4df7-8a09-765794883524
The NorFlashDxe uses an explicit 'BEFORE xxx' Depex declaration to
ensure that it is dispatched before VariableRuntimeDxe, and uses the
file GUID of the latter as 'xxx' explicitly to accomplish that.
However, when enabling UEFI Secure Boot, this breaks down since the
authenticated VariableRuntimeDxe is a completely separate driver, with
a different GUID. Also, the hardcoded dependency on gEfiVariableGuid,
which is not used under UEFI Secure Boot, needs to be factored out in
order to allow this driver to be used.
So clone NorFlashDxe.inf into NorFlashAuthenticatedDxe.inf, and fix
up the dependencies so they refer to gEfiAuthenticatedVariableGuid and
SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17355 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
Remove the installation of the FDT for Juno into the UEFI Configuration
Table from the Juno specific DXE driver. Use the FdtPlatformDxe driver to
do it instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16938 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16325 6f19259b-4bc3-4df7-8a09-765794883524
Allow the PCDs gArmPlatformTokenSpaceGuid.PcdPL031RtcBase and
gArmPlatformTokenSpaceGuid.PcdPL031RtcPpmAccuracy PCDs to be
declared as PcdsDynamic by the platform so they can be overridden
during boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16015 6f19259b-4bc3-4df7-8a09-765794883524
Add additional structure to get file meta-data information from BootMonFS
based files. AXF files are processed by the Flash loader and the ELF header
stripped. The relevant information is stored in the file-system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15902 6f19259b-4bc3-4df7-8a09-765794883524
This is the filesystem created by the microcontroller on NOR Flash of the ARM Versatile
Express Development Board.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15126 6f19259b-4bc3-4df7-8a09-765794883524
On ARM PLatforms, there is no standard way to know how many cores are
available on the platform.
This PCD is expected to contain this number.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13769 6f19259b-4bc3-4df7-8a09-765794883524
Because this driver can be used for different purposes (Terminal, Debug port, communication),
its initialization function has been extended to accept additional settings.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13071 6f19259b-4bc3-4df7-8a09-765794883524
CFI Flash differentiates DeviceBaseAddress with BlockAddress in
its protocol. The DeviceBaseAddress was not considered in the
previous version of this driver.
This version also fixes some bugs in the implementation of the
CFI protocol.
This new version also uses the Boot Mode Hob to reinitialized the
FVB when Boot Mode is equal to BOOT_WITH_DEFAULT_SETTINGS.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13064 6f19259b-4bc3-4df7-8a09-765794883524
Every CPUs have their own initialization requirements.
This library allows to allows to abstract these initialization requirements
into the ARM Platform common components.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12448 6f19259b-4bc3-4df7-8a09-765794883524
This library hides where the 'XIP' Global Variable are located in the memory.
It is expected the Sec/PrePi modules define the Global Variable area through
the GlobalVariable HOB.
The ArmPlatformGlobalVariableLib library allows access to global variables by
their offsets in this region.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12420 6f19259b-4bc3-4df7-8a09-765794883524
In the previous version, every cores had the same stack size.
To avoid to waste memory with secondary core stacks, the primary core stack
size is now different from the secondary cores stack size.
These are the Stack PCDs and their default values:
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecPrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecSecondaryStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecMonStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecMonStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x1000
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12415 6f19259b-4bc3-4df7-8a09-765794883524
Before the PI Global Pointer Offsets were refered to the top of the Global Pointer region (negative offset).
After this commit the Global Pointer Offset are relative to the base of the Global Pointer region.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12172 6f19259b-4bc3-4df7-8a09-765794883524
In the former memory model, the UEFI firmware was expected to be located
at the top of the system memory. Stacks & Pi memory regions were set below
the firmware.
On some platform, the UEFI firmware could be shadowed by the ROM firmware
(case of the BeagleBoard) and in some cases the firmware is copied at the
beginning of the system memory.
With this new memory model, stack and Pi/DXE memory regions are set at the
top of the system memory wherever the UEFI firmware is located in the memory
map.
Because DXE core does not support shadowed firmwares, the system memory covered
by the UEFI firmware is marked as 'Non Present' to avoid to be overlapped by
DXE allocations.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11992 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).
ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h
- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
Feature PCDs cannot be used in assembly files.
The PcdStandalone PCD is needed in one of the assembly file of the
ArmPlatformPkg/PrePi module.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11952 6f19259b-4bc3-4df7-8a09-765794883524
The size of this memory is controlled by a PCD. The Global Variable in this regsion are defined by their offset.
This memory region can be use to store the PEI Services Table Pointer.
Update the PeiServicesTablePointerLib to use this region instead of PcdPeiServicePtrAddr.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11803 6f19259b-4bc3-4df7-8a09-765794883524
The UEFI Specification defines some requirement related to the Boot Manager.
This new version of the BDS support most of the features:
- TimeOut, BootNext, BootOrder, Boot### environment variable for boot device selection
- ConOut. ConIn, ConErr environment variables for console intialization
- Boot EFI application defined by a Device Path
- Support removable devices
- Support FileSystem, MemMap, PXE and TFTP boot devices
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11800 6f19259b-4bc3-4df7-8a09-765794883524
This NOR Flash driver can be reused for other platform (eg: ARM Realview EB).
To make this driver reusable on other platforms the NorFlashPlatformLib library
has been created to abstract the platform specific bits such as the pre-requirements
steps to the initialization and the geometry of the NOR Flash regions.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11746 6f19259b-4bc3-4df7-8a09-765794883524
Formerly, each platform was responsible to declare the location of its UEFI memory
region (used by PEI and DXE Foundations).
The ArmPlatformLib was also declaring every region of its partitionned system memory
with a System Resource HOB.
In this new model, the MemoryInit expects the system memory to be declared with the
PCDs gArmTokenSpaceGuid.PcdSystemMemoryBase/Size.
These PCDs declare the largest continuous DRAM region. Additional regions can be
declared with the ArmPLatformLib function ArmPlatformGetAdditionalSystemMemory().
Now, it is the PEIM that partitions the system memory for every platform. It installs
a region of the size PcdSystemMemoryUefiRegionSize (default 128MB) for the PEI permanent
memory at the top of the DRAM region.
And a region of gArmPlatformTokenSpaceGuid.PcdSystemMemoryFixRegionSize (default 128MB)
is declared at the base of the system memory. This region is used for the allocation that
requires fixed address or have some constraints on their locations.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11481 6f19259b-4bc3-4df7-8a09-765794883524
Evan Lloyd
Ard Biesheuvel
Sami Mujawar
Leendert van Doorn
Olivier Martin
Star Zeng
Ronald Cron
Laszlo Ersek
Leif Lindholm
Harry Liebel
oliviermartin
andrewfish