The following network build flags changed due to the inclusion of
NetworkPkg/Network.fdf.inc.
HTTP_BOOT_ENABLE -> NETWORK_HTTP_BOOT_ENABLE
TLS_ENABLE -> NETWORK_TLS_ENABLE
This commit also adds NETWORK_ALLOW_HTTP_CONNECTIONS to reflect the
change in OvmfPkg/OvmfPkg*.dsc.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1884
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190610065509.19573-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Changed the line endings to DOS line endings for
DynamicTablesPkg/DynamicTablesPkg.dsc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1819
Since there are V2 FSP packages (IntelFsp2Pkg, IntelFsp2WrapperPkg),
this patch removes IntelFspPkg, IntelFspWrapperPkg to remove obsolete
code in edk2 repo.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The ACPI 6.3 specification adds support for describing
ARMv8.1 EL2 virtual timers. Update GTDT Generator
to extend this support.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The PPTT generator uses the configuration manager protocol to
obtain information about platform's processor topology and caches.
This data is then used to generate the PPTT table.
The table generator supports ACPI 6.3, PPTT table revision 2.
The dynamic PPTT generator also carries out extensive input
validation which includes cycle detection and MADT-PPTT
cross-validation. A number of architectural compliance checks
are also performed.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1308
Support rebasing FSP 1.x binary.
FSP 1.x has single component in binary so not supported
by split command and rebase can be done with the same
command for rebasing FSP-T component in FSP 2.x image.
Test: both FSP 2.x (Kabylake) and FSP 1.x (BroadwellDE) binary
can be rebased successfully.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
As Yonghong has some other focus, remove him from the reviewer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1842
According to the discussion at:
https://edk2.groups.io/g/devel/topic/30918343#38093
For OVMF, we keep both ISA stacks:
* The legacy one in PcAtChipsetPkg/IntelFrameworkModulePkg
* The Sio bus based OVMF-specified one introduced by commit a5cc178aeb
for a period of time (includes 1 stable tag: edk2-stable201905). And we
also keep the Sio bus based OVMF-specified stack as the default one (via a
build option 'USE_LEGACY_ISA_STACK') to validate its stability.
This commit will propose to drop the legacy ISA stack from OVMF and remove
the usage of the build flag 'USE_LEGACY_ISA_STACK' at the same time. This
is considered as a preparation for the removal of
PcAtChipsetPkg/IsaAcpiDxe & IntelFrameworkModulePkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Dynamic Tables Framework now supports generating Multiple APIC
Description Table (MADT) revision 5 for ARM platforms while maintaining
backward-compatibility with ACPI 6.2.
The relevant change is the enablement of the Statistical Profiling
Extension (SPE).
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate frame numbers when populating the GT Block Timer
Frames inside the GTDT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate ACPI Processor UIDs when populating the GIC CPU
(GICC) Interface structures inside the MADT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added generic function for detecting duplicate values in an array.
Also defined a function prototype to test if two objects are equal.
The prototype is used as an argument to the 'FindDuplicateValues'
function.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added code to check if the Generic Timer Block Structure's frame number
provided by the platform repository is within the allowed range (0-7).
References:
- ACPI 6.2 Errata A, Table 5-122, September 2017
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ACPI 6.3 specification introduces support to describe
the ARMv8.1 virtual EL2 timers. This patch updates the GTDT parser
of acpiview to decode the EL2 virtual timer fields.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1804
After adding a check to see if [Sources] section lists all the header
type files of a module, track module and library hashes for --hash
feature. If above check is not in compilance for a library or module,
force hash invalidation on that library or module.
Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1804
Add a check to see if [Sources] section lists all the header type
files of a module. Performance impact should be minimal with this patch
since information is already being fetched for Makefile purposes. All
other information is already cached in memory. No extra IO time is needed.
Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1765
If RAW FFS File Rule has no section for its data.For RAW FFS File,
directly call GenFfs tool to generate FFS file.
Ffs Rule:
[Rule.Common.USER_DEFINED.MicroCode]
FILE RAW = $(NAMED_GUID) {
$(INF_OUTPUT)/$(MODULE_NAME).bin
}
[Rule.Common.USER_DEFINED.LOGO]
FILE RAW = $(NAMED_GUID) {
|.bmp
}
As shown in the rule above,if SectionType and FileType not defined,
FFS files are generated directly, and no other type of file is
generated.
The patch is to make the BaseTools support these two rules
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1801
Add a PCD for skipping password prompt in device unlocked status.
Previous change only support if storage device is in locked status.
This change is added to support the case that security status of the
storage device is unlocked.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
The patch fixes the bug that the memory under 1MB is modified by
firmware in S3 boot.
Root cause is a racing condition in MpInitLib:
1. BSP: WakeUpByInitSipiSipi is set by NotifyOnS3SmmInitDonePpi()
2. BSP: WakeUpAP() wakes all APs to run certain procedure.
2.1. AllocateResetVector() uses <1MB memory for wake up vector.
2.1. FillExchangeInfoData() resets NumApsExecuting to 0.
2.2. WaitApWakeup() waits AP to clear WAKEUP_AP_SIGNAL.
3. AP: ApWakeupFunction() clears WAKEUP_AP_SIGNAL to inform BSP.
5. BSP: FreeResetVector() restores the <1MB memory
4. AP: ApWakeupFunction() calls the certain procedure.
4.1. NumApsExecuting is decreased.
#4.1 happens after the 1MB memory is restored so the result is
memory below 1MB is changed by #4.1
It happens only when the AP executes procedure a bit longer.
AP returns back to ApWakeupFunction() from procedure after
BSP restores the <1MB memory.
Since NumApsExecuting is only used when InitFlag == ApInitConfig
for counting the processor count.
The patch moves the NumApsExecuting decrease to the path when
InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Nandagopal Sathyanarayanan <nandagopal.sathyanarayanan@intel.com>
NumApsExecuting is only used when InitFlag == ApInitConfig for
counting the processor count.
The patch changes Ia32 version of waking up vector assembly code
to align to x64 version of waking up vector assembly code.
After the change both versions of waking up vector increase
NumApsExecuting when InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1810
This patch covers two problems.
1. Current code gets CPUID_THERMAL_POWER_MANAGEMENT in
ClockModulationInitialize() and uses its ECMD bit for all processors.
But ClockModulationInitialize() is only executed by BSP, that means
the bit is just for BSP.
It may have no functionality issue as all processors may have same
bit value in a great possibility. But for good practice, the code
should get CPUID_THERMAL_POWER_MANAGEMENT in ClockModulationSupport
(executed by all processors), and then use them in
ClockModulationInitialize() for all processors.
We can see that Aesni.c (and others) have used this good practice.
2. Current code uses 3 CPU_REGISTER_TABLE_WRITE_FIELD for
MSR_IA32_CLOCK_MODULATION in ClockModulationInitialize(), they can
be reduced to 1 CPU_REGISTER_TABLE_WRITE64 by getting
MSR_IA32_CLOCK_MODULATION for all processors in
ClockModulationSupport() and then update fields for register table
write in ClockModulationInitialize().
We may argue that there may be more times of MSR_IA32_CLOCK_MODULATION
getting. But actually the times of MSR_IA32_CLOCK_MODULATION getting
could be also reduced.
The reason is in ProgramProcessorRegister() of CpuFeaturesInitialize.c,
AsmMsrBitFieldWrite64 (AsmReadMsr64 + AsmWriteMsr64) will be used for
CPU_REGISTER_TABLE_WRITE_FIELD, and AsmWriteMsr64 will be used for
CPU_REGISTER_TABLE_WRITE64.
The times of MSR accessing could be reduced with this patch.
Without the patch:
3 CPU_REGISTER_TABLE_WRITE_FIELD (in ClockModulationInitialize)
==> 3 AsmMsrBitFieldWrite64
==> 3 AsmReadMsr64 + 3 AsmWriteMsr64
With the patch:
1 AsmReadMsr64 (in ClockModulationSupport) +
1 CPU_REGISTER_TABLE_WRITE64 (in ClockModulationInitialize)
==> 1 AsmWriteMsr64
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1829
There will be ASSERT if LMCE is supported as below.
DXE_ASSERT!: [CpuFeaturesDxe]
XXX\UefiCpuPkg\Library\CpuCommonFeaturesLib\MachineCheck.c (342):
ConfigData != ((void *) 0)
The code should get Config Data and FeatureControlGetConfigData
could be used.
This issue is there since the code was added at the commit below.
Revision: 3d6275c113
Date: 2017/8/4 8:46:41
UefiCpuPkg CpuCommonFeaturesLib: Enable LMCE feature.
The commits below are also related to move the code.
Revision: 0233871442
Date: 2017/9/1 10:12:38
UefiCpuPkg/Lmce.c Remove useless file.
Revision: 306a5bcc6b
Date: 2017/8/17 11:40:38
UefiCpuPkg/CpuCommonFeaturesLib: Merge machine check code to same file.
So, the code may not be tested at all on a platform
that supports LMCE.
BTW: A typo in LmceInitialize is also fixed.
The typo is introduced by the commit below.
Revision: d28daaddb3
Date: 2018/10/17 9:24:05
UefiCpuPkg/CpuCommonFeaturesLib: Register MSR base on scope Info.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1808
In current code, the values of TopaEntryPtr->Uint64 for TopaTable
and the values of OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64
to register table write for RTIT_OUTPUT_BASE and RTIT_OUTPUT_MASK_PTRS
are not been initialized in whole. For example, the reserved bits in
OutputBaseReg.Uint64 are random that will cause GP fault like below
when SetProcessorRegister (in CpuFeaturesInitialize.c) sets register
based on register table.
!!!! X64 Exception Type - 0D(#GP - General Protection)
CPU Apic ID - 00000000 !!!!
ExceptionData - 0000000000000000
RIP -0000000064D69576, CS -0000000000000038, RFLAGS -0000000000010246
RAX -000000006B9F1001, RCX -0000000000000560, RDX -0000000000000000
RBX -0000000064EECA18, RSP -000000006CB82BA0, RBP -0000000000000008
RSI -0000000080000000, RDI -0000000000000011
R8 -000000006B9493D0, R9 -0000000000000010, R10 -00000000000000FF
R11 -000000006CB82A50, R12 -0000000064D70F50, R13 -0000000066547050
R14 -0000000064E3E198, R15 -0000000000000000
DS -0000000000000030, ES -0000000000000030, FS -0000000000000030
GS -0000000000000030, SS -0000000000000030
CR0 -0000000080010013, CR2 -0000000000000000, CR3 -000000006C601000
CR4 -0000000000000628, CR8 -0000000000000000
DR0 -0000000000000000, DR1 -0000000000000000, DR2 -0000000000000000
DR3 -0000000000000000, DR6 -00000000FFFF0FF0, DR7 -0000000000000400
GDTR -000000006B8CCF18 0000000000000047, LDTR -0000000000000000
IDTR -000000006687E018 0000000000000FFF, TR -0000000000000000
FXSAVE_STATE -000000006CB82800
And current code gets MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceInitialize() and uses their
values for all processors. But ProcTraceInitialize() is only executed
by BSP, that means the values just for BSP. For good practice, the code
should get MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceSupport (executed by all
processors), and then use them in ProcTraceInitialize() for all
processors. This can also resolve the issue that the values of
OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64 are not been
initialized in whole.
For TopaEntryPtr->Uint64, this patch updates code to initialize it
in whole explicitly by TopaEntryPtr->Uint64 = 0 before updating its
fields.
At the same time, this patch also eliminates the ProcTraceSupported
field in PROC_TRACE_PROCESSOR_DATA and the TopaMemArrayCount field in
PROC_TRACE_DATA.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1809
Current code disables TraceEn at the end of ProcTraceInitialize(),
then there will be much memory allocated even when ProcTrace feature
is disabled.
This patch updates code to disable TraceEn and return at the beginning
of ProcTraceInitialize() when when ProcTrace feature is disabled.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The status code reporting functionality in PrePiLib is never invoked
so let's just remove it.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Query the supported attributes firstly, then bitwise AND (&) both VGA_IO
and VGA_IO_16. Since the supported attributes should only have one of
VGA_IO or VGA_IO_16 set, the result of bitwise AND (&) is either VGA_IO
or IO_16. Then the result can be passed to PciIo->Attributes() to set the
attributes.
Device driver should consider both since the mReserveVgaAliases in
PciBusDxe driver is default FALSE(implies that device driver can only set
VGA_IO_16 to PCI_ROOT_BRIDGE), and Platform code may not return
EFI_RESERVE_VGA_IO_ALIAS in GetPlatformPolicy of PciPlatformProtocol to
make mReserveVgaAliases become TRUE(implies that device driver can only
set VGA_IO to PCI_ROOT_BRIDGE), Currently OvmfPkg doesn't have problem
due to it has hard code value for PCI_ROOT_BRIDGE's attributes field, so
an IO access by PciIoProtocol will be successed due to
RootBridgeIoCheckParameter of PciRootBridgeIo.c will always get pass
result for legacy IO access.
Usually the attributes field of PCI_ROOT_BRIDGE should be 0, in that case
it will have issue since the VGA_IO may not be able to be enabled, then
IO access by PciIoProtocol will be failed, hence the QemuVideoDxe driver
will not work fine.
Signed-off-by: Marc Chen <marc.w.chen@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1880
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190606074237.81492-1-marc.w.chen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
CryptoPkg\Library\Include\CrtLibSupport.h maps strxxxx interfaces to
edk2 PrintLib interfaces but related module inf file don't claim the
use of it. This will cause unresolved symbol issue with VS2017 build
which has enabled strict symbol check. This patch resolves the problem
by adding PrintLib to inf files.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This reverts commit a1539c4695.
This change will be pushed after edk2-stable201905
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
When use clang-3.8 to build the NetworkPkg, compiler optimization
may use memcpy for memory copy. For example:
CryptoPkg/Library/OpensslLib/openssl/ssl/ssl_rsa.c:918: undefined
reference to `memcpy'`
Compiler optimization is sophisticated, but we can work around it
use __attribute__((__used__)) to informs the compiler that symbol
should be retained in the object file, even if it may be
unreferenced.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the list of additional licenses in Readme.md. For additional
licenses from a git submodule, provide a link to the license file
in the remote git repository. This makes the links in Readme.md
when viewed from the edk2 repository GitHub landing page
https://github.com/tianocore/edk2/ functional from a web browser.
* Remove references EdkCompatibilityPkg
* Update link to OpenSSL to license file in the git submodule link
to https://github.com/openssl/openssl
* Add link to license file in the git submodule like to
https://github.com/ucb-bar/berkeley-softfloat-3 for
ArmSoftFloatLib
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1878
This issue is specific to VS2017 which tries to resolve symbol referenced
by a symbol not really referenced eventually.
ossl_init_load_crypto_strings
-> err_load_crypto_strings_int (not really referenced)
-> ERR_load_OSSL_STORE_strings
Because OPENSSL_NO_ERR and OPENSSL_NO_AUTOERRINIT are not defined by
default, err_load_crypto_strings_int() will not be actually referenced
by ossl_init_load_crypto_strings().
Since err_load_crypto_strings_int() is not actually referenced at all,
the fix can be done simply by removing crypto/err/err_all.c from build.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MdeModulePkg/Universal/Network has been moved to NetworkPkg. So,
MdeModulePkg/Universal/Network can be removed in Maintainers.txt.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 7cea4d71a8.
Said commit was not suitable for pushing during the edk2-stable201905 hard
feature freeze; it was pushed only by mistake. The subject line referenced
EmulatorPkg, but the patch changed MdeModulePkg/UiApp, regressing the
display of the CPU speed from SMBIOS in multiple platforms.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1877
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since legacy PIC 8259 driver would be removed from edk2,
update UEFI payload to remove 8259 driver.
If required, bootloader could disable 8259.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1686
The bug reporter wish to display nothing as the CPU is virtual
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
FmpDevicePkg use OpensslLib and when OpenSSL upgrade to 1.1.1b,
TimerLib is required by OpensslLib in CryptoPkg(commit 456dd8b99f,
CryptoPkg: Upgrade OpenSSL to 1.1.1b)
So add TimerLib to DSC file.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When building CryptoPkg with XCODE, blow error may result
* usr/lib/clang/9.0.0/include/stdatomic.h:105:17:
error: unknown type name 'wchar_t'
Since the C native atomics are C11 feature we can explicitly
use C99 to work around it.
add -std=c99 to avoid it
* openssl/crypto/conf/conf_sap.c:71:12: error: variable 'ret' is
uninitialized
when used here [-Werror,-Wuninitialized]
Suppress warnings in OpenSSL so we don't break the build with -Werror.
add -Wno-error=uninitialized to disalbe this warning
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
(This is a replacement for commit 39b9a5ffe6 ("OvmfPkg/PlatformPei: fix
MTRR for low-RAM sizes that have many bits clear", 2019-05-16).)
Reintroduce the same logic as seen in commit 39b9a5ffe6 for the pc
(i440fx) board type.
For q35, the same approach doesn't work any longer, given that (a) we'd
like to keep the PCIEXBAR in the platform DSC a fixed-at-build PCD, and
(b) QEMU expects the PCIEXBAR to reside at a lower address than the 32-bit
PCI MMIO aperture.
Therefore, introduce a helper function for determining the 32-bit
"uncacheable" (MMIO) area base address:
- On q35, this function behaves statically. Furthermore, the MTRR setup
exploits that the range [0xB000_0000, 0xFFFF_FFFF] can be marked UC with
just two variable MTRRs (one at 0xB000_0000 (size 256MB), another at
0xC000_0000 (size 1GB)).
- On pc (i440fx), the function behaves dynamically, implementing the same
logic as commit 39b9a5ffe6 did. The PciBase value is adjusted to the
value calculated, similarly to commit 39b9a5ffe6. A further
simplification is that we show that the UC32 area size truncation to a
whole power of two automatically guarantees a >=2GB base address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
(This is a replacement for commit 75136b2954, "OvmfPkg/PlatformPei:
reorder the 32-bit PCI window vs. the PCIEXBAR on q35", 2019-05-16).
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, place the PCIEXBAR at 2816MB (0xB000_0000), and
start the 32-bit PCI window at 3 GB (0xC000_0000). This shrinks the 32-bit
PCI window to
0xFC00_0000 - 0xC000_0000 = 0x3C00_0000 = 960 MB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 60e95bf509.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 9a2e8d7c65.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 75136b2954.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 39b9a5ffe6.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Commit c51f8bae7c ("CryptoPkg: Fix possible build problem with
Clang") added -std=c99 to the CLANG38 compiler command line of
packages that incorporate parts of OpenSSL, to ensure that the new
C atomics code used by OpenSSL for refcounting (which we don't care
about) does not pull in system C library headers, which we cannot
rely on when (cross)building EDK2 code.
Unsurprisingly, CLANG35 (which is only defined for ARM and AARCH64)
suffers from the exact same issue, so let's add the same flags
there as well.
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
OpenSSL internally redefines the size of HMAC_CTX at
crypto/hmac/hmac_lcl.h(OpenSSL commit e0810e35).
Ref: https://github.com/openssl/openssl/pull/4338
We should not use it directly and should remove relevant
functions(Hmac*GetContextSize).
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1792
But for compatiblility, temporarily change these definition
of HMAC_*_CTX_SIZE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
* Update OpenSSL submodule to OpenSSL_1_1_1b
OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687)
* Run process_files.pl script to regenerate OpensslLib[Crypto].inf
and opensslconf.h
* Remove -DNO_SYSLOG from OPENSSL_FLAGS in OpensslLib[Crypto].inf,
due to upstream OpenSSL commit cff55b90e95e("Cleaning UEFI
Build with additional OPENSSL_SYS_UEFI flags", 2017-03-29),
which was first released as part of OpenSSL_1_1_1.
* Starting with OpenSSL commit 8a8d9e1905(first release in
OpenSSL_1_1_1), the OpenSSL_version() function can no longer
return a pointer to the string literal "compiler: information
not available", in the case CFLAGS macro is not defined.
Instead, the function now has a hard dependency on the global
variable 'compiler_flags'. This variable is normally placed
by "util/mkbuildinf.pl" into "buildinf.h". In edk2 we don't
run that script whenever we build OpenSSL, therefore we
must provide our own dummy 'compiler_flags'.
* BUFSIZ is used by crypto/evp/evp_key.c(OpenSSL_1_1_1b)
And it is declared in stdio.h. So add it to CrtLibSupport.h.
Here's a discussion about this.
Ref: https://github.com/openssl/openssl/issues/8904
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
* From OpenSSL_1_1_0i(97c0959f27b294fe1eb10b547145ebef2524b896) to
OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687), OpenSSL
updated DRBG / RAND to request nonce and additional low entropy
randomness from system(line 229 openssl/CHANGES).
Since OpenSSL_1_1_1b doesn't fully implement rand pool functions
for UEFI. We must provide a method to implenet these method.
TSC is used as first entropy source if it's availabe otherwise
fallback to TimerLib. But we are not sure the amount of randomness
they provide. If you really care about the security, one choice is
overrided it with hardware generator.
Add rand_pool.c to implement these functions required by OpenSSL
rand_pool_acquire_entropy
rand_pool_add_nonce_data
rand_pool_add_additional_data
rand_pool_init
rand_pool_cleanup
rand_pool_keep_random_devices_open
And add rand_pool_noise.* for getting entropy noise from different
architecture.
* We don't need ossl_store functions. We exclude relative files
through process_files.pl. And ossl_store_cleanup_int was first
added in crypto/init.c OpenSSL_1_1_1(71a5516d).
So add a new file(ossl_store.c) to implement ossl_store_cleanup_int
function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When building CryptoPkg with Clang, blow error may result
* /usr/lib/llvm-3.8/lib/clang/3.8.0/include/stdatomic.h:105:17: error:
unknown type name 'wchar_t'
Since the C native atomics are C11 feature we can explicitly
use C99 to work around it.
add -std=c99 to avoid it
* openssl/crypto/conf/conf_sap.c:71:12: error: variable 'ret' is
uninitialized
when used here [-Werror,-Wuninitialized]
Suppress warnings in OpenSSL so we don't break the build with -Werror.
add -Wno-error=uninitialized to disalbe this warning
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Gary Lin
Sami Mujawar
Ray Ni
Pierre Gondois
Krzysztof Koch
Chasel Chiu
Zhu, Yonghong
Hao A Wu
Rodriguez, Christian
Fan, ZhijuX
Chu, Maggie
Lu, XiaoyuX
Star Zeng
Ard Biesheuvel
Marc W Chen
Wang, Jian J
Liming Gao
Michael D Kinney
Laszlo Ersek
Dong, Guo
Zhiguang Liu