The TFTP command is easy to use, it has very nice documentation
(accessible with "HELP TFTP" in the shell), and it's a very versatile tool
for downloading files from the host to the guest, via virtual network,
while the guest is in the UEFI shell.
Even better, enabling this command in the shell increases the uncompressed
DXEFV size only by 12896 bytes, in my X64 build, and the final size
increase (after LZMA compression) that is visible in the FVMAIN_COMPACT
volume is merely 2576 bytes.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18554 6f19259b-4bc3-4df7-8a09-765794883524
In this patch, we replace the traditional IDE driver stack that comes from
PcAtChipsetPkg and IntelFrameworkModulePkg with more featureful drivers
from OvmfPkg and MdeModulePkg. The resultant driver stack is compatible
with the previous one, but provides more protocols, on more kinds of
virtual hardware.
Remove:
- PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
(removing EFI_IDE_CONTROLLER_INIT_PROTOCOL [1])
Remove the dependent:
- IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
(removing EFI_DISK_INFO_PROTOCOL [2],
EFI_BLOCK_IO_PROTOCOL [3])
As replacement, add:
- OvmfPkg/SataControllerDxe/SataControllerDxe.inf
(supplying EFI_IDE_CONTROLLER_INIT_PROTOCOL [1])
On top of which, add the dependent:
- MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
(providing EFI_ATA_PASS_THRU_PROTOCOL,
EFI_EXT_SCSI_PASS_THRU_PROTOCOL)
On top of which, add the dependent:
- MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
(supplying EFI_DISK_INFO_PROTOCOL [2],
EFI_BLOCK_IO_PROTOCOL [3],
providing EFI_BLOCK_IO2PROTOCOL,
EFI_STORAGE_SECURITY_COMMAND_PROTOCOL)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[lersek@redhat.com: rewrote commit message]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18532 6f19259b-4bc3-4df7-8a09-765794883524
The OpenFirmware device paths that QEMU generates for these disks and
CD-ROMs are very similar to those generated for the i440fx IDE disks and
CD-ROMs (including the same number of devpath nodes necessary for unique
parsing). The interpretations and the translation to UEFI devpath
fragments are different, of course.
(The spaces after "ide@1,1" are inserted below only for illustration
purposes.)
primary or secondary
| master or slave
v v
i440fx IDE: /pci@i0cf8/ide@1,1 /drive@0/disk@0
Q35 SATA: /pci@i0cf8/pci8086,2922@1f,2/drive@1/disk@0
^ ^
| device number
| (fixed 0)
channel (port) number
The similarity is reflected in the translation output (spaces again
inserted for illustration only):
i440fx IDE: PciRoot(0x0)/Pci(0x1,0x1) /Ata(Primary,Master,0x0)
Q35 SATA: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)
^ ^ ^
| | LUN;
| | always 0 on Q35
| port multiplier port
| number; always 0 on Q35
channel (port) number
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18531 6f19259b-4bc3-4df7-8a09-765794883524
When we bind the SATA controller in SataControllerStart(), we read the NP
("Number of Ports") bitfield from the CAP ("HBA Capabilities") register of
the controller. (See the AHCI 1.3.1 spec.)
This register is memory mapped. If we'd like to access it, we must at
least enable memory space access for the device. In addition, Feng Tian
recommended enabling Bus Master DMA in
<http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10545/focus=10659>.
We also enable IO space access for completeness.
Further, because we change the PCI attributes of the device with the above
when binding it, we must also restore its original PCI attributes when
unbinding it. See the Driver Writer's Guide for UEFI 2.3.1 v1.01, section
18.3 "PCI drivers" | 18.3.2 "Start() and Stop()".
(OvmfPkg's copy of SataControllerDxe differs from the same in DuetPkg
because Duet inherits a pre-configured SATA controller from the BIOS, as
explained by Feng. Technically, DuetPkg's SataControllerDxe could also
apply the technique seen in this patch.)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Feng Tian <feng.tian@intel.com>
Suggested-by: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18528 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add another PCI operation to
SataControllerStart(), which, on error, has to be rolled back similarly to
other actions already being done in SataControllerStart(). Since that PCI
operation won't provide a non-NULL pointer on success, its rollback isn't
really suitable for the current error handling in SataControllerStart().
Employ the traditional cascading labels instead.
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18527 6f19259b-4bc3-4df7-8a09-765794883524
Edk2 maintainers reached the consensus that SataControllerDxe was
inherently platform specific, for which reason it was not appropriate for
either PcAtChipsetPkg nor MdeModulePkg. Hence, if OvmfPkg wanted to use
it, it should either reference it directly from under DuetPkg, or copy it.
Given that DuetPkg is another "leaf" platform in edk2, and that in the
upcoming patches we'll actually modify the driver, the ultimate decision
(reached months ago on the list, after Reza's v2 posting) is that OvmfPkg
shall copy the driver.
This patch does that; the only difference being a fresh FILE_GUID in the
INF file.
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[lersek@redhat.com: updated commit message, generated fresh FILE_GUID]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18526 6f19259b-4bc3-4df7-8a09-765794883524
(PcdSetNxForStack == TRUE) breaks a number of GRUB versions that, it turns
out, are still widely in use. Disable PcdSetNxForStack by default for now.
QEMU users can enable it dynamically using the micro-feature added in the
previous patch.
Reported-by: Anthony Perard <anthony.perard@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18472 6f19259b-4bc3-4df7-8a09-765794883524
Control them with:
-fw_cfg name=opt/ovmf/PcdPropertiesTableEnable,file=no.txt \
-fw_cfg name=opt/ovmf/PcdSetNxForStack,file=yes.txt
where the contents of the text files can be
[0nN1yY](\n|\r\n)?
The macro trickery is not optimal, but it is caused by PcdSetBool(), which
is itself a macro, and can only take open-coded PCD names (ie. no
variables, like function parameters).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18471 6f19259b-4bc3-4df7-8a09-765794883524
Since PcdPropertiesTableEnable is used by the DXE Core (in the
InstallPropertiesTable() function, which runs at End-of-Dxe), we must also
change the PcdLib class resolution for that module, from the default
BasePcdLibNull to DxePcdLib.
Traditionally we've considered the DXE Core to be incapable of accessing
dynamic PCDs -- the PCD PPI is not available any longer to the DXE Core,
and the PCD Protocol is not available to it *yet*. There are exceptions
however: if the DXE Core can ensure, by whatever means, that the PCD
Protocol *is* available, then DxePcdLib will just work (the latter even
lists DXE_CORE as an allowed client module type). Namely, DxePcdLib looks
up the PCD Protocol dynamically, on the first library call that actually
needs it (for accessing a dynamic PCD); the lookup doesn't occur in a
library constructor.
And because the DXE Core fetches PcdPropertiesTableEnable at End-of-Dxe,
the PCD Protocol is definitely available then.
In addition, we change the default value of PcdPropertiesTableEnable from
the inherited TRUE to FALSE. It makes no difference at this point (our
runtime DXE drivers are not built with the required 4KB section alignment
anyway), but it's better to be clear about this. The properties table
feature requires OS compatibility, and it breaks Windows 7 minimally.
Therefore the default should be FALSE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18470 6f19259b-4bc3-4df7-8a09-765794883524
Plus, because PcdSetNxForStack is used by the DXE IPL PEIM (in the
HandOffToDxeCore() function, and in the CreateIdentityMappingPageTables()
function called by the former), we must change the PcdLib class resolution
for that module, from the default BasePcdLibNull to PeiPcdLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18469 6f19259b-4bc3-4df7-8a09-765794883524
The logic we have in place for i440fx does not work reliably on q35. For
example, if the guest has 2GB of RAM, we allow the PCI root bridge driver
to allocate the legacy video RAM BAR from the [2048 MB, 2816 MB] range,
which falls strictly outside of the Q35 PCI host MMIO aperture that QEMU
configures, and advertizes in ACPI.
In turn, PCI BARs that exist outside of the PCI host aperture that is
exposed in ACPI break Windows guests.
Allocating PCI MMIO resources at or above 3GB on Q35 ensures that we stay
within QEMU's aperture. (See the "w32.begin" assignments in
"hw/pci-host/q35.c".) Furthermore, in pc_q35_init() (file
"hw/i386/pc_q35.c"), QEMU ensures that the low RAM never "leaks" above
3GB.
The i440fx logic is left unchanged.
The Windows guest malfunction on Q35 was reported by Jon Panozzo of Lime
Technology, Inc.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jon Panozzo <jonp@lime-technology.com>
Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jonathan Panozzo <jonp@lime-technology.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18393 6f19259b-4bc3-4df7-8a09-765794883524
Bruce Cran reported the following issue:
With iasl version 20150410-64 building OvmfX64 (using OvmfPkg/build.sh
-a X64 -t GCC49 -b RELEASE) results in a couple of warnings about
methods that should be serialized:
.../OvmfPkg/AcpiTables/AcpiTables/OUTPUT/./Dsdt.iiii
95: Method (_CRS, 0) {
Remark 2120 - Control Method should be made Serialized ^ (due to
creation of named objects within)
.../OvmfPkg/AcpiTables/AcpiTables/OUTPUT/./Dsdt.iiii
235: Method (PCRS, 1, NotSerialized) {
Remark 2120 - Control Method should be made Serialized ^ (due to
creation of named objects within)
The ACPI 6.0 spec justifies the above warnings in "19.6.82 Method (Declare
Control Method)":
[...] The serialize rule can be used to prevent reentering of a method.
This is especially useful if the method creates namespace objects.
Without the serialize rule, the reentering of a method will fail when it
attempts to create the same namespace object. [...]
Cc: Bruce Cran <bruce@cran.org.uk>
Reported-by: Bruce Cran <bruce@cran.org.uk>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18392 6f19259b-4bc3-4df7-8a09-765794883524
We have an old bug in BootModeInitialization(): firmware is supposed to
clear the CMOS register 0xF after reading it for the last time. QEMU only
sets this register to 0xFE in "hw/timer/mc146818rtc.c", function
rtc_notify_suspend(), and never clears it. However, SeaBIOS does clear it
in "src/post.c" and "src/resume.c", so let's follow suit.
We've never noticed this until now because the register gets mysteriously
cleared on non-resume reboots when OVMF runs on qemu-system-x86_64. But on
qemu-system-i386, this bug breaks a (suspend, resume, reboot) triplet:
after the last step OVMF thinks it's resuming because when it actually
resumed (in the middle step), it failed to clear the register.
BootModeInitialization() is the perfect function to clear the register,
right after setting mBootMode: the function is executed on both normal
boot and on S3 resume; it succeeds DebugDumpCmos() -- so the dump is not
affected by this patch --; and everything that relies on S3 vs. normal
boot after we clear the register uses mBootMode anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18391 6f19259b-4bc3-4df7-8a09-765794883524
SVN rev 18166 ("MdeModulePkg DxeIpl: Add stack NX support") enables
platforms to request non-executable stack for the DXE phase, by setting
PcdSetNxForStack to TRUE.
The PCD defaults to FALSE, because:
(a) A non-executable DXE stack is a new feature and causes changes in
behavior. Some platform could rely on executing code from the stack.
(b) The code enabling NX in the DXE IPL PEIM enforces the
PcdSetNxForStack ==> PcdDxeIplBuildPageTables
implication for "64-bit PEI + 64-bit DXE" platforms, with a new
ASSERT(). Some platform might not comply with this requirement
immediately.
Regarding (a), in none of the OVMF builds do we try to execute code from
the stack.
Regarding (b):
- In the OvmfPkgX64.dsc build (which is where (b) applies) we simply
inherit the PcdDxeIplBuildPageTables|TRUE default from
"MdeModulePkg/MdeModulePkg.dec". Therefore we can set PcdSetNxForStack
to TRUE.
- In OvmfPkgIa32X64.dsc, page tables are built by default for DXE. Hence
we can set PcdSetNxForStack to TRUE.
- In OvmfPkgIa32.dsc, page tables used not to be necessary until now.
After we set PcdSetNxForStack to TRUE in this patch, the DXE IPL will
construct page tables even when it is built as part of OvmfPkgIa32.dsc,
provided the (virtual) hardware supports both PAE mode and the XD bit.
Should this setting cause problems in a GPU (or other device) passthru
scenario, with a UEFI_DRIVER in the PCI option rom attempting to execute
code from the stack, the feature can be dynamically disabled on the QEMU
command line, with "-cpu <MODEL>,-nx".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: "Zeng, Star" <star.zeng@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18360 6f19259b-4bc3-4df7-8a09-765794883524
Since SVN r18316 / git 5ca29abe52, the HTTP driver needs the HTTP
utilities driver to parse the headers of HTTP requests. Add the driver
into OVMF so that the HTTP driver can work properly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18359 6f19259b-4bc3-4df7-8a09-765794883524
Since Variable driver has been updated to consume the separated VarCheckLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18281 6f19259b-4bc3-4df7-8a09-765794883524
This commit introdues a new build option to OvmfPkg: HTTP_BOOT_ENABLE.
When HttpBoot is enabled, a new Network boot option will show in the
boot manager menu with the device path like this:
PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)/Uri()
It works like the PXE one but fetches the NBP from the given http
url instead of the tftp service.
A simple testing environment can be set up with the QEMU tap network
and dnsmasq + lighttpd.
Here is the example of the dnsmasq config:
interface=<tap interface>
dhcp-range=192.168.111.100,192.168.111.120,12h
dhcp-option=60,"HTTPClient"
dhcp-boot="http://<tap ip>/<efi file>"
It's similar to the PXE server settings except the tftp function is
disabled, the option 60 must be "HTTPClient", and the boot uri is a
http url.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18258 6f19259b-4bc3-4df7-8a09-765794883524
The Clang assembler for AArch64 chokes on the value 0XEA1 since it
expects the 0x prefix to use a lower case x.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18204 6f19259b-4bc3-4df7-8a09-765794883524
Also set the DocRev field the way QEMU exposes it, because
MdeModulePkg/Universal/SmbiosDxe lets us control that field too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18182 6f19259b-4bc3-4df7-8a09-765794883524
At this point all platforms that use OvmfPkg/SmbiosPlatformDxe in edk2,
namely ArmVirtQemu.dsc and OvmfPkg*.dsc, have been migrated to
SmbiosVersionLib. Therefore SmbiosPlatformDxe itself can forego verifying
QEMU's SMBIOS entry point; if SmbiosVersionLib's validation was
successful, it should just rely on that.
(Note that SmbiosPlatformDxe has a depex on EFI_SMBIOS_PROTOCOL, installed
by SmbiosDxe, containing SmbiosVersionLib, therefore the set/get order of
PcdQemuSmbiosValidated is ensured.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18180 6f19259b-4bc3-4df7-8a09-765794883524
This dynamic PCD will enable a small code de-duplication between
OvmfPkg/SmbiosPlatformDxe and OvmfPkg/Library/SmbiosVersionLib. Since both
of those are also used in ArmVirtQemu.dsc, and we should avoid
cross-package commits when possible, this patch declares
PcdQemuSmbiosValidated first, and sets defaults for it in the OvmfPkg DSC
files.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18178 6f19259b-4bc3-4df7-8a09-765794883524
This patch de-duplicates the logic added in commit
OvmfPkg: PlatformPei: set SMBIOS entry point version dynamically
(git 37baf06b, SVN r17676) by hooking DetectSmbiosVersionLib into
SmbiosDxe.
Although said commit was supposed to work with SMBIOS 3.0 payloads from
QEMU, in practice that never worked, because the size / signature checks
in SmbiosVersionInitialization() would always fail, due to the SMBIOS 3.0
entry point being structurally different. Therefore this patch doesn't
regress OvmfPkg.
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18175 6f19259b-4bc3-4df7-8a09-765794883524
Introduce a minimal library instance for fetching and validating the
SMBIOS entry point structure exposed by QEMU over fw_cfg. This library is
meant to be hooked into MdeModulePkg/Universal/SmbiosDxe by platform DSC
files, so that the library can set the PCD(s) that SmbiosDxe consumes at
the right moment.
At the moment only SMBIOS 2.x entry points are recognized.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18174 6f19259b-4bc3-4df7-8a09-765794883524
The LineNumber parameter of the DebugAssert() function has type UINTN.
DebugAssert() passes it to AsciiSPrint() with the %d conversion specifier
at the moment, but %d would require an INT32 argument.
Fix this by casting LineNumber to UINT64, also employing the matching
decimal conversion specifier, %Lu.
(Another possibility would be to cast LineNumber to INT32, but a
UINTN->INT32 cast is not value preserving, generally speaking.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Scott Duplichan <scott@notabs.org>
Reported-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18173 6f19259b-4bc3-4df7-8a09-765794883524
The Xen code in SmbiosPlatformDxe is centered on the informational HOB
with GUID gEfiXenInfoGuid, and the address constants
XEN_SMBIOS_PHYSICAL_ADDRESS=0x000EB000,
XEN_SMBIOS_PHYSICAL_END=0x000F0000.
This Xen hand-off mechanism is specific to the IA32 and X64 architectures,
and it is very unlikely that a future ARM / AARCH64 implementation would
follow it. Therefore, sequester the IA32 / X64 specific code from the rest
of the source, by renaming "Xen.c" to "X86Xen.c", and adding a
GetXenSmbiosTables() stub function in "ArmXen.c" that returns NULL.
(Those file names are inspired by
"OvmfPkg/Library/XenHypercallLib/X86XenHypercall.c".)
The call site in SmbiosTablePublishEntry() [SmbiosPlatformDxe.c] is aware
that a NULL return value means "Xen SMBIOS tables not found", and will
continue to the QEMU tables (for which the retrieval mechanism is shared
by x86 and Arm).
This change enables SmbiosPlatformDxe for ARM architectures; update the
VALID_ARCHITECTURES comment accordingly.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18040 6f19259b-4bc3-4df7-8a09-765794883524
This function is only called from Xen.c, so it should be defined in Xen.c
and have internal linkage (ie. STATIC).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18039 6f19259b-4bc3-4df7-8a09-765794883524
At this point, nothing in the OVMF build calls EFI_ACPI_S3_SAVE_PROTOCOL
member functions; simplify the code by dropping this protocol interface.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18038 6f19259b-4bc3-4df7-8a09-765794883524
Currently we have the following call chain in OVMF:
PlatformBdsPolicyBehavior()
[OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
//
// signals End-of-Dxe
//
OnEndOfDxe() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
S3Ready() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
//
// 1. saves S3 state
//
SaveS3BootScript() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
//
// 2. saves INFO opcode in S3 boot script
// 3. installs DxeSmmReadyToLockProtocol
//
The bottom of this call chain was introduced in git commit 5a217a06 (SVN
r15305, "OvmfPkg: S3 Suspend: save boot script after ACPI context"). That
patch was necessary because there was no other way, due to GenericBdsLib
calling S3Save() from BdsLibBootViaBootOption(), to perform the necessary
steps in the right order:
- save S3 system information,
- save a final (well, only) boot script opcode,
- signal DxeSmmReadyToLock, closing the boot script, and locking down
LockBox and SMM.
The GenericBdsLib bug has been fixed in the previous patch -- the call in
BdsLibBootViaBootOption() has been eliminated.
Therefore, hoist the SaveS3BootScript() code, and call, from
OvmfPkg/AcpiS3SaveDxe, to PlatformBdsLib:
PlatformBdsPolicyBehavior()
[OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
//
// signals End-of-Dxe
//
OnEndOfDxe() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
S3Ready() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
//
// 1. saves S3 state
//
<---
SaveS3BootScript() [OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
//
// 2. saves INFO opcode in S3 boot script
// 3. installs DxeSmmReadyToLockProtocol
//
The installation of DxeSmmReadyToLockProtocol belongs with Platform BDS,
not AcpiS3SaveDxe, and we can now undo the hack in SVN r15305, without
upsetting the relative order of the steps.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18037 6f19259b-4bc3-4df7-8a09-765794883524
(Paraphrasing git commit 9cd7d3c5 / SVN r17713:)
Currently, OvmfPkg fails to signal the End-of-Dxe event group when
entering the BDS phase, which results in some loss of functionality, eg.
variable reclaim in the variable driver, and the memory region splitting
in the DXE core that belongs to the properties table feature specified in
UEFI-2.5.
As discussed on the edk2-devel mailing list here:
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16109
it is up to the platform BDS to signal End-of-Dxe, since there may be
platform specific ordering constraints with respect to the signalling of
the event that are difficult to honor at the generic level.
(OvmfPkg specifics:)
(1) In OvmfPkg, we can't signal End-of-Dxe before PCI enumeration
completes. According to the previous patch, that would trigger
OvmfPkg/AcpiS3SaveDxe to save S3 state *before* the following chain of
action happened:
- PCI enumeration completes
- ACPI tables are installed by OvmfPkg/AcpiPlatformDxe
- the FACS table becomes available
Since OvmfPkg/AcpiS3SaveDxe can only save S3 state once the FACS table
is available, we must delay the End-of-Dxe signal until after PCI
enumeration completes (ie. root bridges are connected).
(2) Pre-patch, S3Ready() in OvmfPkg/AcpiS3SaveDxe is entered from
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c].
After the patch, we enter S3Ready() earlier than that, by signaling
End-of-Dxe in PlatformBdsPolicyBehavior(). The timing / location of
this new call is correct as well, and the original call (that now
becomes the chronologically second call) becomes a no-op: S3Ready() is
protected against 2nd and later entries.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18035 6f19259b-4bc3-4df7-8a09-765794883524
Call S3Ready() whenever the first of the following occurs:
- a driver signals End-of-Dxe,
- a driver calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save().
S3Ready() already contains a static, function scope "latch" that causes it
to exit early when called for the second time or later.
(At the moment, the only platform in the edk2 tree that includes this
driver is OvmfPkg. That platform does not signal End-of-Dxe (yet).)
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16146
Suggested-by: Yao Jiewen <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18034 6f19259b-4bc3-4df7-8a09-765794883524
We are preparing for detaching the S3Ready() functionality from the
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we
will hook the same logic to the End-of-Dxe event group.
The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize().
According to the documenation,
This function returns the size of the legacy memory (meaning below 1 MB)
that is required during an S3 resume. Before the Framework-based
firmware transfers control to the OS, it has to transition from flat
mode into real mode in case the OS supplies only a real-mode waking
vector. This transition requires a certain amount of legacy memory.
After getting the size of legacy memory below, the caller is responsible
for allocating the legacy memory below 1 MB according to the size that
is returned. The specific implementation of allocating the legacy memory
is out of the scope of this specification.
When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the
legacy memory allocated above must be passed to it, in the
LegacyMemoryAddress parameter.
In practice however:
- The S3Ready() function ignores the LegacyMemoryAddress completely.
- No code in the edk2 tree calls
EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever.
- All callers of this specific implementation of
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL
LegacyMemoryAddress:
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c]
For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never
called, and that the LegacyMemoryAddress parameter is always NULL.
This fact is important to capture in the code, because in the End-of-Dxe
callback, no LegacyMemoryAddress parameter can be taken. So let's make it
clear that we actually don't even have any use for that parameter.
This patch ports the identical change from IntelFrameworkModulePkg to
OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18033 6f19259b-4bc3-4df7-8a09-765794883524
The OFW device path that QEMU exports in the "bootorder" fw_cfg file, for
a device that is plugged into the main PCI root bus, is:
/pci@i0cf8/...
Whereas the same device plugged into the N'th extra root bus results in:
/pci@i0cf8,N/pci-bridge@0/...
(N is in hex.)
Extend TranslatePciOfwNodes() so that it not assume a single PCI root;
instead it parse the extra root bus serial number if present, and resolve
it in the translation to the UEFI devpath fragment.
Note that the "pci-bridge@0" node is a characteristic of QEMU's PXB
device. It reflects the actual emulated PCI hierarchy. We don't parse it
specifically in this patch, because it is automatically handled by the
bridge sequence translator added recently in SVN rev 17385 (git commit
feca17fa4b) -- "OvmfPkg: QemuBootOrderLib: parse OFW device path nodes of
PCI bridges".
The macro EXAMINED_OFW_NODES need not be raised from 6. The longest OFW
device paths that we wish to recognize under this new scheme comprise 5
nodes. The initial "extra root bus" OFW fragment, visible at the top,
takes up 2 nodes, after which the longest device-specific patterns (IDE
disk, IDE CD-ROM, ISA floppy, virtio-scsi disk) take 3 more nodes each.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17965 6f19259b-4bc3-4df7-8a09-765794883524
SeaBIOS requires the OpenFirmware device paths exported in the "bootorder"
fw-cfg file to refer to extra (PXB) root buses by their relative positions
(in increasing bus number order) rather than by actual bus numbers.
However, OVMF's PCI host bridge / root bridge driver creates PciRoot(UID)
device path nodes for extra PCI root buses with UID=bus_nr, not position.
(These ACPI devpath UID values must, and do, match the UID values exposed
in QEMU's ACPI payload, generated for PXB root buses.)
Therefore the boot order matching logic will have to map extra root bus
positions to bus numbers. Add a small group of utility functions to help
with that.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17964 6f19259b-4bc3-4df7-8a09-765794883524
QEMU provides an fw_cfg file called "etc/extra-pci-roots", containing a
little-endian UINT64 value that exposes the number of extra root buses. We
can use this value to terminate the scan as soon as we find the last extra
root bus.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17963 6f19259b-4bc3-4df7-8a09-765794883524
In this patch we assume that root bus number 0 is always there (same as
before), and scan the rest of the extra root buses, up to and including
255. When an extra root bus is found, we install the PCI root bridge IO
protocol for the previous root bus (which might be bus 0 or just the
previous extra root bus).
The root bridge protocol created thus will report the available bus number
range
[own bus number, next extra root bus number - 1]
The LHS of this interval will be used for the root bus's own number, and
the rest of the interval (which might encompass 0 additional elements too)
can be used by the PCI bus driver to assign subordinate bus numbers from.
(Subordinate buses are provided by PCI bridges that hang off the root bus
in question.)
For MMIO and IO space allocation, all the root buses share the original
[0x8000_0000, 0xFFFF_FFFF] and [0x0, 0xFFFF] ranges, respectively.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17962 6f19259b-4bc3-4df7-8a09-765794883524
This field was supposed to store the number of root buses created; however
we don't need to keep that count persistently. After the entry point returns,
nothing reads this field.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17961 6f19259b-4bc3-4df7-8a09-765794883524
On output, the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Configuration() function
produces a pointer to a buffer of ACPI 2.0 resource descriptors:
Resources A pointer to the ACPI 2.0 resource descriptors that describe
the current configuration of this PCI root bridge. The
storage for the ACPI 2.0 resource descriptors is allocated by
this function. The caller must treat the return buffer as
read-only data, and the buffer must not be freed by the
caller.
PciHostBridgeDxe currently provides this buffer in a structure with static
storage duration. If multiple root bridges existed in parallel, the
pointers returned by their Configuration() methods would point to the same
static storage. A later Configuration() call would overwrite the storage
pointed out by an earlier Configuration() call (which was possibly made
for a different, but still alive, root bridge.)
Fix this problem by embedding the configuration buffer in
PCI_ROOT_BRIDGE_INSTANCE.
While we're at it, correct some typos (Desp -> Desc), spell out a missing
pack(1) pragma, and improve formatting.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17960 6f19259b-4bc3-4df7-8a09-765794883524
The entry point of the driver, InitializePciHostBridge(), leaks resources
(and installed protocols) in the following cases:
- The first root bridge protocol installation fails. In this case, the
host bridge protocol is left installed, but the driver exits with an
error.
- The second or a later root bridge protocol installation fails. In this
case, the host bridge protocol, and all prior root bridge protocols, are
left installed, even though the driver exits with an error.
Handle errors correctly: roll back / release / uninstall resources when
aborting the driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17959 6f19259b-4bc3-4df7-8a09-765794883524
This new function incorporates the current loop body found in the entry
point function, InitializePciHostBridge(). It will be called once for each
root bus discovered.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17958 6f19259b-4bc3-4df7-8a09-765794883524
Currently we define a device path for each root bridge statically (for all
one of them). Since we'll want to create a dynamic number of root bridges,
replace the static device paths with a common template, embed the actual
device path into the private root bridge structure, and distinguish the
device paths from each other in the UID field (as required by ACPI).
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17957 6f19259b-4bc3-4df7-8a09-765794883524
There is no need to store these constants in dedicated static storage
duration objects; we can simply open-code them, simplifying the code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17956 6f19259b-4bc3-4df7-8a09-765794883524
The entry point function of this driver, InitializePciHostBridge(), and
the static storage duration objects it relies on, are speculatively
generic -- they nominally support more than one host bridges, but (a) the
code hardwires the number of host bridges as 1, (b) it's very unlikely
that we'd ever like to raise that number (especially by open-coding it).
So let's just remove the the nominal support, and simplify the code.
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17955 6f19259b-4bc3-4df7-8a09-765794883524
Currently we only connect the root bus with bus number 0, by device path.
Soon we will possibly have several extra root buses, so connect all root
buses up-front (bus number zero and otherwise), by protocol GUID.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17954 6f19259b-4bc3-4df7-8a09-765794883524
The ASSERT() in SetPciIntLine() assumes that Device 0 on "the" root bus
corresponds to the PCI host bridge (00:00). This used to be true, but
because we're going to have extra root buses (with nonzero bus numbers),
soon this assumption may no longer hold. Check for the zero root bus
number explicitly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17953 6f19259b-4bc3-4df7-8a09-765794883524
These messages are helpful for comparing the assignments made by OVMF
against those made by SeaBIOS. To SeaBIOS a small debug patch like the
following can be applied:
> diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> index ac39d23..9e61c22 100644
> --- a/src/fw/pciinit.c
> +++ b/src/fw/pciinit.c
> @@ -308,8 +308,12 @@ static void pci_bios_init_device(struct pci_device *pci)
>
> /* map the interrupt */
> int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN);
> - if (pin != 0)
> - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci, pin));
> + if (pin != 0) {
> + int irqline = pci_slot_get_irq(pci, pin);
> +
> + pci_config_writeb(bdf, PCI_INTERRUPT_LINE, irqline);
> + dprintf(1, "assigned irq line %d\n", irqline);
> + }
>
> pci_init_device(pci_device_tbl, pci, NULL);
>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17952 6f19259b-4bc3-4df7-8a09-765794883524
The source code is copied verbatim, with the following two exceptions:
- the UNI files are dropped, together with the corresponding UNI
references in the INF file,
- the INF file receives a new FILE_GUID.
The OVMF DSC and FDF files are at once flipped to the cloned driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17951 6f19259b-4bc3-4df7-8a09-765794883524
The FileReserved variable in QemuFwCfgFindFile() is only used to skip
over the reserved field in file headers, which causes newer versions of
GCC to flag it with a "variable set but not used" warning (which is normally
not visible since as of right now these warnings are supressed). It's true
that the value read into FileReserved is never used, but this is
intentional. This patch adds a do-nothing reference to silence the
warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bill Paul <wpaul@windriver.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17920 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Therefore we can remove Ip4ConfigDxe driver from this build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17914 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore hang when loads a PEIM whose section alignment requirement is 0x40
but the actual base address is 0x20 aligned.
The issue is caused by the following facts, in order:
1. GCC49 requires the section alignment of .data to be 0x40. So a new link
script gcc4.9-ld-script was added for GCC49 to specify the 0x40
alignment.
2. GenFw tool was enhanced to sync ELF's section alignment to PE header.
Before the enhancement, the section alignment of converted PE image
always equals to 0x20.
If only with #1 change, GCC49 build image won't hang in PeiCore because
the converted PE image still claims 0x20 section alignment which is
aligned to the align setting set in FDF file. But later with #2 change,
the converted PE image starts to claims 0x40 section alignment, while
build tool still puts the PEIM in 0x20 aligned address, resulting the
PeCoffLoaderLoadImage() reports IMAGE_ERROR_INVALID_SECTION_ALIGNMENT
error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17902 6f19259b-4bc3-4df7-8a09-765794883524
The bash binary can be in various locations depending on the system: on Linux
it's in /bin while on BSD it's normally in /usr/local/bin. However, the
env binary is almost always in /usr/bin and so can be used to find and start
the shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce@cran.org.uk>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17883 6f19259b-4bc3-4df7-8a09-765794883524
We are preparing for detaching the S3Ready() functionality from the
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we
will hook the same logic to the End-of-Dxe event group.
The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize().
According to the documenation,
This function returns the size of the legacy memory (meaning below 1 MB)
that is required during an S3 resume. Before the Framework-based
firmware transfers control to the OS, it has to transition from flat
mode into real mode in case the OS supplies only a real-mode waking
vector. This transition requires a certain amount of legacy memory.
After getting the size of legacy memory below, the caller is responsible
for allocating the legacy memory below 1 MB according to the size that
is returned. The specific implementation of allocating the legacy memory
is out of the scope of this specification.
When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the
legacy memory allocated above must be passed to it, in the
LegacyMemoryAddress parameter.
In practice however:
- The S3Ready() function ignores the LegacyMemoryAddress completely.
- No code in the edk2 tree calls
EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever.
- All callers of this specific implementation of
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL
LegacyMemoryAddress:
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c]
For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never
called, and that the LegacyMemoryAddress parameter is always NULL.
This fact is important to capture in the code, because in the End-of-Dxe
callback, no LegacyMemoryAddress parameter can be taken. So let's make it
clear that we actually don't even have any use for that parameter.
This patch ports the identical change from IntelFrameworkModulePkg to
OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17806 6f19259b-4bc3-4df7-8a09-765794883524
AuthVariableLib and TpmMeasurementLib library classes are now linked with
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
to optionally support secure variables.
For OvmfPkg,
link AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg
when SECURE_BOOT_ENABLE = TRUE,
and link AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg
when SECURE_BOOT_ENABLE = FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17760 6f19259b-4bc3-4df7-8a09-765794883524
At the moment we work with a UC default MTRR type, and set three memory
ranges to WB:
- [0, 640 KB),
- [1 MB, LowerMemorySize),
- [4 GB, 4 GB + UpperMemorySize).
Unfortunately, coverage for the third range can fail with a high
likelihood. If the alignment of the base (ie. 4 GB) and the alignment of
the size (UpperMemorySize) differ, then MtrrLib creates a series of
variable MTRR entries, with power-of-two sized MTRR masks. And, it's
really easy to run out of variable MTRR entries, dependent on the
alignment difference.
This is a problem because a Linux guest will loudly reject any high memory
that is not covered my MTRR.
So, let's follow the inverse pattern (loosely inspired by SeaBIOS):
- flip the MTRR default type to WB,
- set [0, 640 KB) to WB -- fixed MTRRs have precedence over the default
type and variable MTRRs, so we can't avoid this,
- set [640 KB, 1 MB) to UC -- implemented with fixed MTRRs,
- set [LowerMemorySize, 4 GB) to UC -- should succeed with variable MTRRs
more likely than the other scheme (due to less chaotic alignment
differences).
Effects of this patch can be observed by setting DEBUG_CACHE (0x00200000)
in PcdDebugPrintErrorLevel.
Cc: Maoming <maoming.maoming@huawei.com>
Cc: Huangpeng (Peter) <peter.huangpeng@huawei.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Maoming <maoming.maoming@huawei.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17722 6f19259b-4bc3-4df7-8a09-765794883524
Maoming reported that guest memory sizes equal to or larger than 64GB
were not correctly handled by OVMF.
Enabling the DEBUG_GCD (0x00100000) bit in PcdDebugPrintErrorLevel, and
starting QEMU with 64GB guest RAM size, I found the following error in the
OVMF debug log:
> GCD:AddMemorySpace(Base=0000000100000000,Length=0000000F40000000)
> GcdMemoryType = Reserved
> Capabilities = 030000000000000F
> Status = Unsupported
This message is emitted when the DXE core is initializing the memory space
map, processing the "above 4GB" memory resource descriptor HOB that was
created by OVMF's QemuInitializeRam() function (see "UpperMemorySize").
The DXE core's call chain fails in:
CoreInternalAddMemorySpace() [MdeModulePkg/Core/Dxe/Gcd/Gcd.c]
CoreConvertSpace()
//
// Search for the list of descriptors that cover the range BaseAddress
// to BaseAddress+Length
//
CoreSearchGcdMapEntry()
CoreSearchGcdMapEntry() fails because the one entry (with type
"nonexistent") in the initial GCD memory space map is too small, and
cannot be split to cover the memory space range being added:
> GCD:Initial GCD Memory Space Map
> GCDMemType Range Capabilities Attributes
> ========== ================================= ================ ================
> NonExist 0000000000000000-0000000FFFFFFFFF 0000000000000000 0000000000000000
The size of this initial entry is determined from the CPU HOB
(CoreInitializeGcdServices()).
Set the SizeOfMemorySpace field in the CPU HOB to mPhysMemAddressWidth,
which is the narrowest valid value to cover the entire guest RAM.
Reported-by: Maoming <maoming.maoming@huawei.com>
Cc: Maoming <maoming.maoming@huawei.com>
Cc: Huangpeng (Peter) <peter.huangpeng@huawei.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Maoming <maoming.maoming@huawei.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17720 6f19259b-4bc3-4df7-8a09-765794883524
We'll soon increase the maximum guest-physical RAM size supported by OVMF.
For more RAM, the DXE IPL is going to build more page tables, and for that
it's going to need a bigger chunk from the permanent PEI RAM.
Otherwise CreateIdentityMappingPageTables() would fail with:
> DXE IPL Entry
> Loading PEIM at 0x000BFF61000 EntryPoint=0x000BFF61260 DxeCore.efi
> Loading DXE CORE at 0x000BFF61000 EntryPoint=0x000BFF61260
> AllocatePages failed: No 0x40201 Pages is available.
> There is only left 0x3F1F pages memory resource to be allocated.
> ASSERT .../MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c(123):
> BigPageAddress != 0
(The above example belongs to the artificially high, maximal address width
of 52, clamped by the DXE core to 48. The address width of 48 bits
corresponds to 256 TB or RAM, and requires a bit more than 1GB for paging
structures.)
Cc: Maoming <maoming.maoming@huawei.com>
Cc: Huangpeng (Peter) <peter.huangpeng@huawei.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Brian J. Johnson <bjohnson@sgi.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <bjohnson@sgi.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17719 6f19259b-4bc3-4df7-8a09-765794883524
This command was used to convert the file:
iconv -f UTF-16 -t UTF-8 \
-o OvmfPkg/PlatformDxe/Platform.uni \
OvmfPkg/PlatformDxe/Platform.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17700 6f19259b-4bc3-4df7-8a09-765794883524
Qemu commit c5d4dac ("virtio-vga: add virtio gpu device with vga
compatibility") enables OVMF to drive the virtio-vga device:
The vga compatibility part of virtio-vga is identical to the qemu
standard vga, so supporting that is as easy as adding the PCI ID
to the list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: subject fixup and QEMU commit reference in commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17690 6f19259b-4bc3-4df7-8a09-765794883524
Git commit 54753b60 (SVN r16870), "MdeModulePkg: Update SMBIOS revision to
3.0." changed PcdSmbiosVersion from 0x0208 to 0x0300. This controls the
version number of the SMBIOS entry point table (and other things) that
"MdeModulePkg/Universal/SmbiosDxe" installs.
Alas, this change breaks older Linux guests, like RHEL-6 (up to RHEL-6.7);
those are limited to 2.x (both in the guest kernel firmware driver, and in
the dmidecode utility). The SMBIOS 3.0 entry point has a different GUID --
defined in UEFI 2.5 -- pointing to it in the UEFI Configuration Table, and
guest kernels that lack upstream kernel commit e1ccbbc9d5 don't recognize
it.
The v2.1.0+ machine types of QEMU generate SMBIOS payload for the firmware
to install. The payload includes the entry point table ("anchor" table).
OvmfPkg/SmbiosPlatformDxe cannot install the anchor table (because that is
the jurisdiction of the generic "MdeModulePkg/Universal/SmbiosDxe"
driver); however, we can parse the entry point version from QEMU's anchor
table, and instruct "MdeModulePkg/Universal/SmbiosDxe" to adhere to that
version.
On machine types older than v2.1.0, the feature is not available, but
then, should anything in OVMF install SMBIOS tables, version 2.8 is simply
safer / more widely supported than 3.0 -- hence the default 2.8 value for
the dynamic PCD.
We set the PCD in PlatformPei (when not on the S3 resume path), because
that's an easy and certain way to set the PCD before a DXE driver reads
it. This follows the example of PcdEmuVariableNvStoreReserved (which is
read by EmuVariableFvbRuntimeDxe).
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1232876
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17676 6f19259b-4bc3-4df7-8a09-765794883524
This patch initialises root complex register block BAR in order to
support TCO watchdog emulation features (e.g. reboot upon NO_REBOOT bit
not set) on QEMU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17601 6f19259b-4bc3-4df7-8a09-765794883524
Make HostBridgeDevId global so MemMapInitialization() can also use it to
conditionally add RCRB MMIO address to HOB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17600 6f19259b-4bc3-4df7-8a09-765794883524
SVN r15305 (git 5a217a06), "OvmfPkg: S3 Suspend: save boot script after
ACPI context", made this driver install gEfiDxeSmmReadyToLockProtocolGuid
in SaveS3BootScript() -- for valid reasons --, however in the INF file the
protocol was marked as "ALWAYS_CONSUMED". Fix it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17437 6f19259b-4bc3-4df7-8a09-765794883524
The PMBA_RTE and ACPI_TIMER_OFFSET macros apply equally to both boards,
plus they are triplicated between the various AcpiTimerLib instances.
Define them centrally in "OvmfPlatforms.h".
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17436 6f19259b-4bc3-4df7-8a09-765794883524
All POWER_MGMT_REGISTER_PIIX4() macro invocations in OvmfPkg should use
the macros in "I440FxPiix4.h" as arguments.
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17435 6f19259b-4bc3-4df7-8a09-765794883524
All POWER_MGMT_REGISTER_Q35() macro invocations in OvmfPkg should use the
macros in "Q35MchIch9.h" as arguments.
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17434 6f19259b-4bc3-4df7-8a09-765794883524
Define some new macros for register addresses (both PCI and IO) and
register values (bits) that we're going to use soon.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17433 6f19259b-4bc3-4df7-8a09-765794883524
Move platform specific macros to their own include files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17432 6f19259b-4bc3-4df7-8a09-765794883524
When the Q35 machine type(s) of QEMU are used with libvirt, libvirt tends
to place some devices behind PCI bridges. This is then reflected in the
"bootorder" fw_cfg file. For example:
/pci@i0cf8/pci-bridge@1e/pci-bridge@1/scsi@5/disk@0,0
/pci@i0cf8/pci-bridge@1e/pci-bridge@1/scsi@3/channel@0/disk@0,0
As yet QemuBootOrderLib doesn't support such OFW device paths.
Add code that translates a sequence of pci-bridge nodes.
In practice libvirt seems to insert two such nodes (*), hence increment
EXAMINED_OFW_NODES with the same number.
(* Background, paraphrasing Laine Stump's words:
When the machine type is Q35, we create a dmi-to-pci bridge coming off of
the pcie root controller, and a pci-to-pci bridge coming off of that, then
attach most devices to the pci-to-pci bridge. This is done because you
can't hotplug into pcie-root, can't (or at least shouldn't) plug a
pci-to-pci bridge into pcie-root (so the next one has to be
dmi-to-pci-bridge), and can't hotplug into dmi-to-pci-bridge (so you need
to have a pci-to-pci bridge).)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17385 6f19259b-4bc3-4df7-8a09-765794883524
It is the responsibility of the SerialPortLib implementation
to deal with flow control if the underlying medium cannot keep
up with the inflow of data.
So in our SerialPortWrite () function, we should spin as long
as we need to in order to deliver all the data instead of giving
up and returning a smaller value than the number of bytes we were
given. Also, remove the 'if (Sent > 0)' condition on the signalling
of the event channel: if the buffer is full and we haven't been able
to add any more data, it makes perfect sense to signal the event
channel again, even if we have done so before when we did write
the data.
Also, this patch brings the implementation of XenSerialPortLib
in sync with the library class documentation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: replace DebugLib dependency with open-coded ASSERT()]
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17079 6f19259b-4bc3-4df7-8a09-765794883524
On PIIX4, function 3, the PMREGMISC register at offset 0x80, with
default value 0x00 has its bit 0 (PMIOSE) indicate whether the PM
IO space given in the PMBA register (offset 0x40) is enabled.
PMBA must be configured *before* setting this bit.
On Q35/ICH9+, function 0x1f, the equivalent role is fulfilled by
bit 7 (ACPI_EN) in the ACPI Control Register (ACPI_CNTL) at offset
0x44, also with a default value of 0x00.
Currently, OVMF hangs when Q35 reboots, because while PMBA is reset
by QEMU, the register at offset 0x80 (matching PMREGMISC on PIIX4)
is not reset, since it has a completely different meaning on LPC.
As such, the power management initialization logic in OVMF finds
the "PMIOSE" bit enabled after a reboot and decides to skip setting
PMBA. This causes the ACPI timer tick routine to read a constant
value from the wrong register, which in turn causes the ACPI delay
loop to hang indefinitely.
This patch modifies the Base[Rom]AcpiTimerLib constructors and the
PlatformPei ACPI PM init routines to use ACPI_CNTL:ACPI_EN instead
of PMREGMISC:PMIOSE when running on Q35.
Reported-by: Reza Jelveh <reza.jelveh@tuhh.de>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17076 6f19259b-4bc3-4df7-8a09-765794883524
QEMU commit aa685789 ("xhci: generate a Transfer Event for each Transfer
TRB with the IOC bit set") fixed an emulation problem in QEMU; we can now
drive that host controller with edk2's XhciDxe. Include it in OvmfPkg, as
XHCI emulation is reportedly more virtualization-friendly than EHCI,
consuming less CPU.
The driver can be tested with the following QEMU command line options:
-device nec-usb-xhci -device usb-kbd
This patch should not regress existing QEMU command lines (ie. trigger an
ASSERT() in XhciDxe that fails on pre-aa685789 QEMU) because QEMU's
"-device nec-usb-xhci" has never before resulted in USB devices that
worked with edk2 firmware builds, hence users have never had a reason to
add that option.
Now that they learn about XHCI support in OVMF by reading this commit
message, they (or their packagers) will also know to update qemu to
aa685789 or later (in practice that means the upcoming 2.3 release), at
least if they want to use '-device nec-usb-xhci' with edk2, for the first
time ever.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Alexander Graf <agraf@suse.de>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17055 6f19259b-4bc3-4df7-8a09-765794883524
XenHypercallLib has two clients at the moment: XenBusDxe and
XenConsoleSerialPortLib. Currently, when XenBusDxe starts on a non-Xen X86
platform (ie. as part of OVMF not running on Xen), the X86XenHypercallLib
instance built into it fails to initialize, which triggers an ASSERT() in
auto-generated code.
Instead, let's call XenHypercallIsAvailable() in the driver's entry point,
and exit cleanly when the driver is started on a non-Xen platform.
Modify the constructor of XenConsoleSerialPortLib similarly; we shouldn't
proceed if Xen is not available. In practice this check should never fail,
because XenConsoleSerialPortLib is only used on ARM, and
ArmXenHypercallLib is always available; but nonetheless we should be
pedantic.
Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17001 6f19259b-4bc3-4df7-8a09-765794883524
Similarly to QemuFwCfgLib, we prefer mellow library construction code and
an explicit "are you available" query function in the XenHypercallLib
class. In this step we introduce that query function, but move no client
code to it yet.
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17000 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add a simple query function to the XenHypercallLib
library class that is supposed to be called by initialization code in
modules. Among those, in constructors of dependent libraries too.
Library construction ordering is ensured only between libraries with
constructors, plus we shouldn't allow a dependent library with a
constructor to call into any XenHypercallLib instances (the simple query
function) before XenHypercallLib is constructed itself. For this reason,
introduce an (empty) constructor for ARM & AARCH64 too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16999 6f19259b-4bc3-4df7-8a09-765794883524
Perform the following renames in order to stick with edk2 tradition more
closely:
XenHypercallLibArm, XenHypercallLibIntel -> XenHypercallLib
XenHypercallIntel -> X86XenHypercall
In addition, we unify the INF files.
This patch modifies ArmVirtualizationPkg and OvmfPkg at once, in order to
keep both bisectable (client code shouldn't break).
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16998 6f19259b-4bc3-4df7-8a09-765794883524
This adds a XenIoMmioLib declaration and implementation that can
be invoked to install the XENIO_PROTOCOL and a corresponding
grant table address on a EFI handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16979 6f19259b-4bc3-4df7-8a09-765794883524
On non-PCI Xen guests (such as ARM), the XenBus root is not a PCI
device but an abstract 'platform' device. Add a dedicated Vendor
Hardware device path GUID to identify this node.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16978 6f19259b-4bc3-4df7-8a09-765794883524
This implements a SerialPortLib instance that wires up to the
PV console ring used by domU guests. Also imports the required
upstream Xen io/console.h header.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16976 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates XenBusDxe to use the 16-bit compare and exchange
function that was introduced for this purpose to the
BaseSynchronizationLib. It also provides a new generic implementation
of TestAndClearBit () using the same 16-bit compare and exchange, making
this module fully architecture agnostic.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16975 6f19259b-4bc3-4df7-8a09-765794883524
This patch adds an implementation of XenHypercallLib for both
AArch64 and AArch32 execution modes on ARM systems.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16974 6f19259b-4bc3-4df7-8a09-765794883524
While Xen on Intel uses a virtual PCI device to communicate the
base address of the grant table, the ARM implementation uses a DT
node, which is fundamentally incompatible with the way XenBusDxe is
implemented, i.e., as a UEFI Driver Model implementation for a PCI
device.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16973 6f19259b-4bc3-4df7-8a09-765794883524
Prepare for making XenBusDxe suitable for use with non-PCI devices
(such as the DT node exposed by Xen on ARM) by introducing a separate
DXE driver that binds to the Xen virtual PCI device and exposes the
abstract XENIO_PROTOCOL for XenBusDxe to bind against.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16972 6f19259b-4bc3-4df7-8a09-765794883524
This introduces the abstract XENIO_PROTOCOL that will be used to
communicate the Xen grant table address to drivers supporting this
protocol. Primary purpose is allowing us to change the XenBusDxe
implementation so that it can support non-PCI Xen implementations
such as Xen on ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16971 6f19259b-4bc3-4df7-8a09-765794883524
This moves all of the Xen hypercall code that was private to XenBusDxe
to a new library class XenHypercallLib. This will allow us to reimplement
it for ARM, and to export the Xen hypercall functionality to other parts
of the code, such as a Xen console SerialPortLib driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16970 6f19259b-4bc3-4df7-8a09-765794883524
This refactors the Xen hypercall implementation that is part of the
XenBusDxe driver, in preparation of splitting it off entirely into
a XenHypercallLib library. This involves:
- removing the dependency on XENBUS_DEVICE* pointers in the XenHypercall()
prototypes
- moving the discovered hyperpage address to a global variable
- moving XenGetSharedInfoPage() to its only user XenBusDxe.c (the shared info
page is not strictly part of the Xen hypercall interface, and is not used
by other expected users of XenHypercallLib such as the Xen console version
of SerialPortLib
- reimplement XenHypercall2() in C and move the indexing of the hyperpage
there; the existing asm implementations are renamed to __XenHypercall2() and
invoked from the new C implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16969 6f19259b-4bc3-4df7-8a09-765794883524
On ARM, xen_pfn_t is 64 bits but the size of a pointer is only
32 bits, so casting between them needs to go via (UINTN). Also
move the xen_pfn_t cast outside the shift so that we can avoid
shifting 64-bit quantities on 32-bit architectures, which may
require runtime library support.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16968 6f19259b-4bc3-4df7-8a09-765794883524
Tiancore has its private copy of the Xen headers, and all drivers
that depend on it should use the same Xen interface version, so
let's move the #define to xen.h itself.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16967 6f19259b-4bc3-4df7-8a09-765794883524
The only feature not portable to ArmVirtualizationQemu is the VBE shim;
make that dependent on Ia32 / X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16890 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16411 delayed ACPI table installation until PCI enumeration was
complete, because on QEMU the ACPI-related fw_cfg files should have been
downloaded only after PCI enumeration. Said commit implemented the
dependency by tightening the module's depex.
This patch replaces the EFI_PCI_ENUMERATION_COMPLETE_PROTOCOL depex with a
matching protocol registration callback. The depex was static, and it
could not handle dynamically discovered situations when the dependency
would turn out invalid.
Namely:
- At the moment, the depex in "QemuFwCfgAcpiPlatformDxe.inf" assumes
that "ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc"
lacks PCI support. However, PCI support is about to become run-time
discoverable on that platform. If PCI support is missing, then
ArmVirtualizationPkg will set PcdPciDisableBusEnumeration to TRUE.
Hence, when PcdPciDisableBusEnumeration is TRUE, we invalidate the
dependency by not registering the callback and installing the ACPI
tables right away.
- InitializeXen() in "OvmfPkg/PlatformPei/Xen.c" sets
PcdPciDisableBusEnumeration to TRUE. This causes
PciBusDriverBindingStart() in "MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c"
to set gFullEnumeration to FALSE, which in turn makes PciEnumerator() in
"MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c" branch to
PciEnumeratorLight(). The installation of
EFI_PCI_ENUMERATION_COMPLETE_PROTOCOL at the end of PciEnumerator() is
not reached.
Which means that starting with SVN r16411, AcpiPlatformDxe is never
dispatched on Xen.
Hence, when PcdPciDisableBusEnumeration is TRUE, we invalidate the
dependency by not registering the callback and installing the ACPI
tables right away.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Removed PcdOvmfPciEnabled]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16887 6f19259b-4bc3-4df7-8a09-765794883524
Currently the entry point functions of both driver builds
(AcpiPlatformDxe.inf and QemuFwCfgAcpiPlatformDxe.inf) directly contain
the logic that is different between the two builds.
Because we're going to restructure the entry point logic soon, we'd have
to duplicate the same new code between both entry point functions.
Push down the logic in which they differ to a new function:
- InstallAcpiTables() [AcpiPlatform.c]
- InstallAcpiTables() [QemuFwCfgAcpiPlatform.c]
and extract a common entry point function:
- AcpiPlatformEntryPoint() [EntryPoint.c]
which we can soon modify without code duplication.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16885 6f19259b-4bc3-4df7-8a09-765794883524
This name better aligns with InstallXenTables and InstallOvmfFvTables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16884 6f19259b-4bc3-4df7-8a09-765794883524
Since this function also installs the tables, this is a better
name. It also aligns with the InstallXenTables name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16883 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek
Reza Jelveh
Jordan Justen
Gary Ching-Pang Lin
Star Zeng
Ard Biesheuvel
Bill Paul
Jiaxin Wu
Ruiyu Ni
Bruce Cran
Gerd Hoffmann
Paulo Alcantara
Gabriel Somlo