Match data type and format specifier for printing.
1. Type cast ProcessorNumber and FeatureIndex to UINT32
as %d only expects a UINT32.
2. Use %08x instead of %08lx for CacheControl to print Index
as it is UINT32 type.
3. Use %016lx instead of %08lx for MemoryMapped to print
(Index | LShiftU64 (HighIndex, 32)) as it is UINT64 type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
So this patch adds a platform PPI for the microcode shadow logic, and
remove the FIT related code from EDK2.
The FIT based microcode shadow support will be implemented as a new
platform PEIM in IntelSiliconPkg in edk2-platforms.
This patch doesn't provide a DXE version shadow microcode protocol,
a platform which only uses DxeMpInitLib instance only supports PCD
based microcode shadowing.
A detailed design doc can be found here:
https://edk2.groups.io/g/devel/files/Designs/2020/0214/Support%20
the%202nd%20Microcode%20FV%20Flash%20Region.pdf
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1584
The flow of CPU feature initialization logic is:
1. BSP calls GetConfigDataFunc() for each thread/AP;
2. Each thread/AP calls SupportFunc() to detect its own capability;
3. BSP calls InitializeFunc() for each thread/AP.
There is a design gap in step #3. For a package scope feature that only
requires one thread of each package does the initialization operation,
what InitializeFunc() currently does is to do the initialization
operation only CPU physical location Core# is 0.
But in certain platform, Core#0 might be disabled in hardware level
which results the certain package scope feature isn't initialized at
all.
The patch adds a new field First to indicate the CPU's location in
its parent scope.
First.Package is set for all APs/threads under first package;
First.Core is set for all APs/threads under first core of each
package;
First.Thread is set for the AP/thread of each core.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1366
Commit b3c71b472d supported MSR setting
in different scopes. It added below macro:
CPU_FEATURE_THREAD_BEFORE
CPU_FEATURE_THREAD_AFTER
CPU_FEATURE_CORE_BEFORE
CPU_FEATURE_CORE_AFTER
CPU_FEATURE_PACKAGE_BEFORE
CPU_FEATURE_PACKAGE_AFTER
And it re-interpreted CPU_FEATURE_BEFORE as CPU_FEATURE_THREAD_BEFORE
and CPU_FEATURE_AFTER as CPU_FEATURE_THREAD_AFTER.
This patch retires CPU_FEATURE_BEFORE and CPU_FEATURE_AFTER
completely.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 89164babec:
UefiCpuPkg/MpInitLib: don't shadow the microcode patch twice.
attempted to use 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
fields to avoid loading the microcode patches data into memory again in
the DXE phase.
However, the CPU_MP_DATA structure has members with type 'UINTN' or
pointer before the microcode patch related fields. This may cause issues
when PEI and DXE are of different archs (e.g. PEI - IA32, DXE - x64),
since the microcode patch related fields will have different offsets in
the CPU_MP_DATA structure.
Commit 88bd066166:
UefiCpuPkg/MpInitLib: Relocate microcode patch fields in CPU_MP_DATA
tried to resolve the above-mentioned issue by relocating the fields
'MicrocodePatchRegionSize' and 'MicrocodePatchAddress' before members with
different size between different archs. But it failed to take the case of
pre-built binaries (e.g. FSP) into consideration.
Binaries can be built when the code base had a different version of the
CPU_MP_DATA structure definition. This may cause issues when accessing
these microcode patch related fields, since their offsets are different
(between PEI phase in the binaries and DXE phase in current code
implementation).
This commit will use the newly introduced EDKII microcode patch HOB
instead for the DXE phase to get the information of the loaded microcode
patches data done in the PEI phase. And the 'MicrocodePatchRegionSize' and
'MicrocodePatchAddress' fields in CPU_MP_DATA will not be used to pass
information between phases.
For pre-built binaries, they can be classified into 3 types with regard to
the time when they are being built:
A. Before commit 89164babec
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
were not being used to skip microcode load in DXE)
For this case, the EDKII microcode patch HOB will not be produced. This
commit will load the microcode patches data again in DXE. Such behavior is
the same with the code base back then.
B. After commit 89164babec, before commit e1ed55738e
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
being used to skip microcode load in DXE, but failed to work properly
between differnt archs.)
For this case, the EDKII microcode patch HOB will not be produced as well.
This commit will also load the microcode patches data again in DXE.
But since commit 89164babec failed to keep the detection and application
of microcode patches working properly in DXE after skipping the load, we
fall back to the origin behavior (that is to load the microcode patches
data again in DXE).
C. After commit e1ed55738e
(In other words, EDKII microcode patch HOB will be produced.)
For this case, it will have the same behavior with the BIOS built from
the current source codes.
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This reverts commit 88bd066166.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 88bd066166 relocates the 'MicrocodePatchAddress' and
'MicrocodePatchRegionSize' fields in structure CPU_MP_DATA to ensure that
they can be properly passed between different architectures.
However, such change is not backward compatible with the scenario like
pre-existing binaries such as FSP. These binaries are built when the code
base has a different version of the CPU_MP_DATA structure definition. This
may cause issues when accessing the 'MicrocodePatchAddress' and
'MicrocodePatchRegionSize' fields, since their offsets are different
(between PEI phase in the FSP binaries and DXE phase in current code
implementation).
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Fix various typos in comments and documentation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-79-philmd@redhat.com>
Fix various typos in comments and documentation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-78-philmd@redhat.com>
Fix few typos in comments and documentation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-77-philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2498
Commit fd30b00707 updated the logic in function MicrocodeDetect() that
will directly use the CPUID and PlatformID information from the 'CpuData'
field in the CPU_MP_DATA structure, instead of collecting these
information for each processor via AsmCpuid() and AsmReadMsr64() calls
respectively.
At that moment, this approach worked fine for APs. Since:
a) When the APs are waken up for the 1st time (1st MpInitLibInitialize()
entry at PEI phase), the function InitializeApData() will be called for
each AP and the CPUID and PlatformID information will be collected.
b) During the 2nd entry of MpInitLibInitialize() at DXE phase, when the
APs are waken up again, the function InitializeApData() will not be
called, which means the CPUID and PlatformID information will not be
collected. However, the below logics in MicrocodeDetect() function:
CurrentRevision = GetCurrentMicrocodeSignature ();
IsBspCallIn = (ProcessorNumber == (UINTN)CpuMpData->BspNumber) ? TRUE : FALSE;
if (CurrentRevision != 0 && !IsBspCallIn) {
//
// Skip loading microcode if it has been loaded successfully
//
return;
}
will ensure that the microcode detection and application will be
skipped due to the fact that such process has already been done in the
PEI phase.
But after commit 396e791059, which removes the above skip loading logic,
the CPUID and PlatformID information on APs will be used upon the 2nd
entry of the MpInitLibInitialize(). But since the CPUID and PlatformID
information has not been collected, it will bring issue to the microcode
detection process.
This commit will update the logic in MicrocodeDetect() back to always
collecting the CPUID and PlatformID information explicitly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2474
Previous commit d786a17232:
UefiCpuPkg/MpInitLib: Reduce the size when loading microcode patches
Removed the below assignments for the 'InitFlag' field of CPU_MP_DATA
structure in function MpInitLibInitialize() when APs are waken up to do
some initialize sync:
CpuMpData->InitFlag = ApInitReconfig;
...
CpuMpData->InitFlag = ApInitDone;
The above commit mistakenly assumed the 'InitFlag' field will have a value
of 'ApInitDone' when the APs have been successfully waken up before. And
since there is no explicit comparision for the 'InitFlag' field with the
'ApInitReconfig' value. The commit removed those assignments.
However, under some cases (e.g. when variable OldCpuMpData is not NULL,
which means function CollectProcessorCount() will not be called), removing
the above assignments will left the 'InitFlag' field being uninitialized
with a value of 0, which is a invalid value for the type of 'InitFlag'
(AP_INIT_STATE).
It may potentially cause the WakeUpAP() function to run some unnecessary
codes when the APs have been successfully waken up before:
if (CpuMpData->WakeUpByInitSipiSipi ||
CpuMpData->InitFlag != ApInitDone) {
ResetVectorRequired = TRUE;
AllocateResetVector (CpuMpData);
FillExchangeInfoData (CpuMpData);
SaveLocalApicTimerSetting (CpuMpData);
}
This commit will address the above-mentioned issue.
Test done:
* OS boot on a real platform with multi processors
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In commit 4eee0cc7cc ("UefiCpuPkg/PiSmmCpu: Enable 5 level paging when
CPU supports", 2019-07-12), the Page Directory Entry setting was regressed
(corrupted) when splitting a 2MB page to 512 4KB pages, in the
InitPaging() function.
Consider the following hunk, displayed with
$ git show --function-context --ignore-space-change 4eee0cc7cc
> //
> // If it is 2M page, check IsAddressSplit()
> //
> if (((*Pd & IA32_PG_PS) != 0) && IsAddressSplit (Address)) {
> //
> // Based on current page table, create 4KB page table for split area.
> //
> ASSERT (Address == (*Pd & PHYSICAL_ADDRESS_MASK));
>
> Pt = AllocatePageTableMemory (1);
> ASSERT (Pt != NULL);
>
> + *Pd = (UINTN) Pt | IA32_PG_RW | IA32_PG_P;
> +
> // Split it
> - for (PtIndex = 0; PtIndex < SIZE_4KB / sizeof(*Pt); PtIndex++) {
> - Pt[PtIndex] = Address + ((PtIndex << 12) | mAddressEncMask | PAGE_ATTRIBUTE_BITS);
> + for (PtIndex = 0; PtIndex < SIZE_4KB / sizeof(*Pt); PtIndex++, Pt++) {
> + *Pt = Address + ((PtIndex << 12) | mAddressEncMask | PAGE_ATTRIBUTE_BITS);
> } // end for PT
> *Pd = (UINT64)(UINTN)Pt | mAddressEncMask | PAGE_ATTRIBUTE_BITS;
> } // end if IsAddressSplit
> } // end for PD
First, the new assignment to the Page Directory Entry (*Pd) is
superfluous. That's because (a) we set (*Pd) after the Page Table Entry
loop anyway, and (b) here we do not attempt to access the memory starting
at "Address" (which is mapped by the original value of the Page Directory
Entry).
Second, appending "Pt++" to the incrementing expression of the PTE loop is
a bug. It causes "Pt" to point *right past* the just-allocated Page Table,
once we finish the loop. But the PDE assignment that immediately follows
the loop assumes that "Pt" still points to the *start* of the new Page
Table.
The result is that the originally mapped 2MB page disappears from the
processor's view. The PDE now points to a "Page Table" that is filled with
garbage. The random entries in that "Page Table" will cause some virtual
addresses in the original 2MB area to fault. Other virtual addresses in
the same range will no longer have a 1:1 physical mapping, but be
scattered over random physical page frames.
The second phase of the InitPaging() function ("Go through page table and
set several page table entries to absent or execute-disable") already
manipulates entries in wrong Page Tables, for such PDEs that got split in
the first phase.
This issue has been caught as follows:
- OVMF is started with 2001 MB of guest RAM.
- This places the main SMRAM window at 0x7C10_1000.
- The SMRAM management in the SMM Core links this SMRAM window into
"mSmmMemoryMap", with a FREE_PAGE_LIST record placed at the start of the
area.
- At "SMM Ready To Lock" time, PiSmmCpuDxeSmm calls InitPaging(). The
first phase (quoted above) decides to split the 2MB page at 0x7C00_0000
into 512 4KB pages, and corrupts the PDE. The new Page Table is
allocated at 0x7CE0_D000, but the PDE is set to 0x7CE0_E000 (plus
attributes 0x67).
- Due to the corrupted PDE, the second phase of InitPaging() already looks
up the PTE for Address=0x7C10_1000 in the wrong place. The second phase
goes on to mark bogus PTEs as "NX".
- PiSmmCpuDxeSmm calls SetMemMapAttributes(). Address 0x7C10_1000 is at
the base of the SMRAM window, therefore it happens to be listed in the
SMRAM map as an EfiConventionalMemory region. SetMemMapAttributes()
calls SmmSetMemoryAttributes() to mark the region as XP. However,
GetPageTableEntry() in ConvertMemoryPageAttributes() fails -- address
0x7C10_1000 is no longer mapped by anything! -- and so the attribute
setting fails with RETURN_UNSUPPORTED. This error goes unnoticed, as
SetMemMapAttributes() ignores the return value of
SmmSetMemoryAttributes().
- When SetMemMapAttributes() reaches another entry in the SMRAM map,
ConvertMemoryPageAttributes() decides it needs to split a 2MB page, and
calls SplitPage().
- SplitPage() calls AllocatePageTableMemory() for the new Page Table,
which takes us to InternalAllocMaxAddress() in the SMM Core.
- The SMM core attempts to read the FREE_PAGE_LIST record at 0x7C10_1000.
Because this virtual address is no longer mapped, the firmware crashes
in InternalAllocMaxAddress(), when accessing (Pages->NumberOfPages).
Remove the useless assignment to (*Pd) from before the loop. Revert the
loop incrementing and the PTE assignment to the known good version.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1789335
Fixes: 4eee0cc7cc
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The existing MpInitLib will shadow the microcode update patches from
flash to memory and this is done by searching microcode region specified
by PCD PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize.
This brings a limition to platform FW that all the microcode patches must
be placed in one continuous flash space.
This patch shadows microcode update according to FIT microcode entries if
it's present, otherwise it will fallback to original logic (by PCD).
A new featured PCD gUefiCpuPkgTokenSpaceGuid.PcdCpuShadowMicrocodeByFit
is added for enabling/disabling this support.
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add code to set SMXE in CR4 in the SmxInitialize flow when SMX is enabled.
Signed-off-by: Jason Voelz <jason.voelz@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch updates the microcode loader to always perform a microcode
detect and load on both BSP and AP processor. This is to fix a potential
microcode revision mismatch issue in below situation:
1. Assume there are two microcode co-exists in flash: one production
version and one debug version microcode.
2. FIT loads production microcode to BSP and all AP.
3. UefiCpuPkg loader loads debug microcode to BSP, and skip the loading
on AP.
As a result, different microcode patches are loaded to BSP and AP, and
trigger microcode mismatch error during OS boot.
BZ link: https://bugzilla.tianocore.org/show_bug.cgi?id=2431
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch removes the unnecessary alignment check on microcode patch
TotalSize introduced by commit d786a172. The TotalSize has already been
checked with 1K alignment and MAX_ADDRESS in previous code as below:
if ( (UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize) ||
((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd ||
(DataSize & 0x3) != 0 ||
(TotalSize & (SIZE_1KB - 1)) != 0 ||
TotalSize < DataSize
) {
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2434
Current code use below loops to enumerate the CPUs:
for (Index = mMaxNumberOfCpus; Index-- > 0;) {
it has no issue but not easy for the developers to read the code.
Update above code to below style,
for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
It make the developers easy to read and consistent with other
similar cases in this driver.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
This reverts commit 123b720eeb.
The commit message for commit 123b720eeb is not correct.
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Former change (9caaa79dd7) missed
PROCEDURE_TOKEN part, this change covers it.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Previous commits have introduced below fields in structure CPU_AP_DATA:
UINT32 ProcessorSignature;
UINT8 PlatformId;
UINT64 MicrocodeEntryAddr;
which store the information of:
A. CPUID
B. Platform ID
C. Detected microcode patch entry address (including the microcode patch
header)
for each processor within system.
Therefore, the below fields in structure CPU_MP_DATA:
UINT32 ProcessorSignature;
UINT32 ProcessorFlags;
UINT64 MicrocodeDataAddress;
UINT32 MicrocodeRevision;
which store the BSP's information of:
A. CPUID
B. Platform ID
C. The address and revision of detected microcode patch
are redundant and can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The below 2 microcode patch related fields in structure CPU_MP_DATA:
UINT64 MicrocodePatchAddress;
UINT64 MicrocodePatchRegionSize;
They will be passed from PEI phase and be reused DXE phase.
Previously, these 2 fields were placed after some fields with type
'UINTN', this will lead to different field offset in different
architecture for them.
This commit will move them before the fields with different size in
different architecture to ensure they can be properly used in DXE phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will update the MpInitLib to:
A. Collect the base address and size information after microcode patches
being loaded into memory;
B. Collect the detected microcode patch for each processor within system;
C. Based on the collected information, produce the EDKII microcode patch
HOB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will add the definitions for EDKII microcode patch HOB.
The intention of adding this HOB is to provide a scheme to store the below
information:
A. The base address and size of the microcode patches that are being
loaded (from flash) into memory;
B. The information of detected microcode patch for each processor within
the system.
The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
detect and apply of the microcode happen). The consumer of the HOB can be
modules that want to detect/apply the microcode patch by themselves again
later during the boot flow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will attempt to reduce the copy size when loading the
microcode patches data from flash into memory.
Such optimization is done by a pre-process of the microcode patch headers
(on flash). A microcode patch will be loaded into memory only when the
below 3 criteria are met:
A. With a microcode patch header (which means the data is not padding data
between microcode patches);
B. The 'ProcessorSignature' & 'ProcessorFlags' fields in the header match
at least one processor within system;
C. If the Extended Signature Table exists in a microcode patch, the
'ProcessorSignature' & 'ProcessorFlag' fields in the table entries
match at least one processor within system.
Criterion B and C will require all the processors to be woken up once to
collect their CPUID and Platform ID information. Hence, this commit will
move the copy, detect and apply of microcode patch on BSP and APs after
all the processors have been woken up.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will collect the CPUID and Platform ID information for each
processor within system. They will be stored in the CPU_AP_DATA structure.
These information will be used in the next commit to decide whether a
microcode patch will be loaded into memory.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The size for the array of mSmmMpSyncData->CpuData[] is 0 ~
mMaxNumberOfCpus -1. But current code may use
mSmmMpSyncData->CpuData[mMaxNumberOfCpus].
This patch fixed this issue.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2268
In current implementation, when check whether APs called by StartUpAllAPs
or StartUpThisAp, it checks the Tokens value used by other APs. Also the AP
will update the Token value for itself if its task finished. In this
case, the potential race condition issues happens for the tokens.
Because of this, system may trig ASSERT during cycling test.
This change enhance the code logic, add new attributes for the token to
remove the reference for the tokens belongs to other APs.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
In MpLib.c, remove the white space on a new line.
In PageTbl.c and PiSmmCpuDxeSmm.h, update the comment style.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2329
XD (ExecutionDisable) feature, when turned on, allows page table
entry BIT63 set to 1 indicating the memory pointed by the page table
is disallowed to execute.
DxeIpl::CreateIdentityMappingPageTables() enables the XD when CPU
supports it.
Later DxeCore modifies the page table to set the BIT63 to protect
the stack/heap to disallow code execution in stack/heap.
UefiCpuPkg/CpuCommonFeaturesLib enables/disables the XD feature
according to PcdCpuFeaturesSetting.
When XD is disabled, GP fault is generated immediately because some
page entries have BIT63 set.
To fix this issue, this patch removes the XD feature logic from
UefiCpuPkg/CpuCommonFeaturesLib so the XD feature is only taken
care of by DxeIpl.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MpInitLib sets X2ApicEnable in two places.
1. CollectProcessorCount()
This function is called when MpInitLibInitialize() hasn't been
called before.
It sets X2ApicEnable and later in the same function it configures
all CPUs to operate in X2 APIC mode.
2. MpInitLibInitialize()
The X2ApicEnable setting happens when this function is called in
second time. But after that setting, no code consumes that flag.
With the above analysis and with the purpose of simplifying the code,
the X2ApicEnable in #1 is changed to local variable and the #2 can be
changed to remove the setting of X2ApicEnable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's logic sets X2ApicEnable flag in each AP's initialization
path when InitFlag == ApInitConfig.
Since all CPUs update the same global data, a spin-lock is used
to avoid modifications from multiple CPUs happen at the same time.
The spin-lock causes two problems:
1. Potential performance downgrade.
2. Undefined behavior when improper timer lib is used.
For example we saw certain platforms used AcpiTimerLib from
PcAtChipsetPkg and that library depends on retrieving PeiServices
from idtr. But in fact AP's (idtr - 4) doesn't point to
PeiServices.
The patch simplifies the code to let BSP set the X2ApicEnable flag so
the spin-lock acquisition from AP is not needed any more.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2255
Update UefiCpuPkg.dsc to guarantee all libraries and
modules are always built. Add the following components.
* UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
* UefiCpuPkg/Library/CpuCommonFeaturesLib/CpuCommonFeaturesLib.inf
ResetVector.inf is a binary INF, so no source builds are
triggered from adding this line. However, a build with
this component does verify the contents of the INF file.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Before adding another AP enumeration mode, clarify the documentation on
the current logic. No functional changes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1039
Current implementation not checks system mode before using
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.X64 or
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.Ia32. This patch check the
mode before using the correct one.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2150
v4:
The v3 posting didn't do what it promised to do, so do it now for real.
V3 changes:
change to mov instruction (non locking instuction) instead
of xchg to simplify design.
V2 changes:
Add xchg 16 bit instructions to handle sgdt and sidt base
63:48 bits and 47:32 bits.
Add comment to explain why xchg 64bit isnt being used
Split lock happens when a locking instruction is used on mis-aligned data
that crosses two cachelines. If close source platform enables Alignment
Check Exception(#AC), They can hit a double fault due to split lock being
in CpuExceptionHandlerLib.
sigt and sgdt saves 10 bytes to memory, 8 bytes is base and 2 bytes is limit.
The data is mis-aligned, can cross two cacheline, and a xchg
instruction(locking instuction) is being utilize.
Signed-off-by: John E Lofgren <john.e.lofgren@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Due to needs a tackling the deficiency of the AP API, it's necessary to
ensure that in non-blocking mode previous AP executed command is
finished before starting new one.
To remedy above:
1) execute AcquireSpinLock instead AcquireSpinLockOrFail - this will
ensure time "window" to eliminate potential race condition between
BSP and AP spinLock release in non-blocking mode.
This also will eliminate possibility to start executing new AP
function before last is finished.
2) remove returns EFI_STATUS - EFI_NOT_READY - in new scenario returned
status is not necessary to caller.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
PcdCpuSmmRestrictedMemoryAccess is introduced to replace
PcdCpuSmmStaticPageTable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's behavior is to enable 5l paging when CPU supports it
(CPUID[7,0].ECX.BIT[16] is set).
The patch changes the behavior to enable 5l paging when two
conditions are both met:
1. CPU supports it;
2. The max physical address bits is bigger than 48.
Because 4-level paging can support to address physical address up to
2^48 - 1, there is no need to enable 5-level paging with max
physical address bits <= 48.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2153
Current logic will skip searching EFI_PEI_CORE_FV_LOCATION_PPI when the
PPI in PpiList having EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag,
but platform may pass single PPI in PpiList that should be supported.
Changed the logic to verify PpiList first before checking
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag.
Test: Verified both single EFI_PEI_CORE_FV_LOCATION_PPI and multiple
PPIs in PpiList cases and both can boot with the PeiCore
specified by EFI_PEI_CORE_FV_LOCATION_PPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are three PCDs that may impact the behavior of each other in
SMM environment:
PcdCpuSmmProfileEnable
PcdHeapGuardPropertyMask in MdeModulePkg
PcdCpuSmmRestrictedMemoryAccess
The patch updates the comments in DEC file to document it.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's behavior is to always restrict access to non-SMRAM regardless
the value of PcdCpuSmmRestrictedMemoryAccess.
Because RAS components require to access all non-SMRAM memory, the
patch changes the code logic to honor PcdCpuSmmRestrictedMemoryAccess
so that only when the PCD is true, the restriction takes affect and
page table memory is also protected.
Because IA32 build doesn't reference this PCD, such restriction
always takes affect in IA32 build.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch changes PiSmmCpu driver to consume PCD
PcdCpuSmmRestrictedMemoryAccess.
Because the behavior controlled by PcdCpuSmmStaticPageTable in
original code is not changed after switching to
PcdCpuSmmRestrictedMemoryAccess.
The functionality is not impacted by this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Zeng, Star
Siyuan Fu
Ray Ni
Hao A Wu
Antoine Coeur
Laszlo Ersek
Jason Voelz
Eric Dong
Shenglei Zhang
Michael D Kinney
Sean Brogan
Leif Lindholm
John E Lofgren
Damian Nikodem
Chasel Chiu