This library hides where the 'XIP' Global Variable are located in the memory.
It is expected the Sec/PrePi modules define the Global Variable area through
the GlobalVariable HOB.
The ArmPlatformGlobalVariableLib library allows access to global variables by
their offsets in this region.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12420 6f19259b-4bc3-4df7-8a09-765794883524
The denomination 'Normal' was used to make reference to the 'Normal'
or 'Non Secure' or 'Non Trusted' world.
To avoid confusion, this prefix has been removed from PCDs to define
the normal world.
The PCDs explicitely related to the Secure/Trusted World continue to
have the 'Sec' prefix.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12416 6f19259b-4bc3-4df7-8a09-765794883524
In the previous version, every cores had the same stack size.
To avoid to waste memory with secondary core stacks, the primary core stack
size is now different from the secondary cores stack size.
These are the Stack PCDs and their default values:
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecPrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecSecondaryStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecMonStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecMonStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x1000
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12415 6f19259b-4bc3-4df7-8a09-765794883524
On MpCore system, the primary core can now be any core of the system.
To identify the primary core, you can use 'gArmTokenSpaceGuid.PcdArmPrimaryCoreMask'
and 'gArmTokenSpaceGuid.PcdArmPrimaryCore'.
These PCDs by default use the ClusterId and CoreId to identify the core. And the
primary core is defined as the ClusetrId=0 and CoreId=0.
The helper macros are: IS_PRIMARY_CORE(MpId), GET_CORE_ID(MpId), GET_CLUSTER_ID(MpId),
GET_CORE_POS(MpId), PRIMARY_CORE_ID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12412 6f19259b-4bc3-4df7-8a09-765794883524
This library is the interface for the ARM Generic Interrupt Controller
Architecture Specification.
ARM Platform can use any GIC controller (not necessary PL390 GIC).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12411 6f19259b-4bc3-4df7-8a09-765794883524
There are two variants of the Linux Loader EFI application:
- the ATAG version 'LinuxAtagLoader.inf': expect to start an ATAG 'zImage'
in the same directory as the EFI application
- the FDT version 'LinuxFdtLoader.inf': load the FDT blob 'platform.dtb'
and the FDT 'zImage' from the same directory as the EFI application.
When these applications are started without any argument, a menu appears
to the user to create/update a boot entry.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12410 6f19259b-4bc3-4df7-8a09-765794883524
Separate the BdsBootLinux() function into two functions for Atag and Fdt specific Linux booting
- BdsBootLinuxAtag ()
- BdsBootLinuxFdt ()
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12408 6f19259b-4bc3-4df7-8a09-765794883524
Missing from my commit "ArmPkg/BdsLib: Move some functions used to
create/update BDS Boot Entry from ArmPlatformPkg/Bds to
ArmPkg/BdsLib"
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12325 6f19259b-4bc3-4df7-8a09-765794883524
The previous version was only checking if the Remaining Device Path node
was a MemMap DevicePath node.
This fix also checks if the Root DevicePath node is a MemMap DevicePath node.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12315 6f19259b-4bc3-4df7-8a09-765794883524
This structure is defined by the UEFI specification and has a better location in BdsLib.
ArmPlatformPkg/Bds: Encapsulate the BDS_LOAD_OPTION into a list entry structure
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12312 6f19259b-4bc3-4df7-8a09-765794883524
Some coherencies issues were existing in the former version of DmaLib.
These issues could have for consequences to not make the MdeModulePkg/Bus/Usb
software stack not work.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12137 6f19259b-4bc3-4df7-8a09-765794883524
This library is used to display the loaded address of the 'Sec' at the early
stage of the boot process. The debug command line generated by PeCoffExtraActionLib
can be used for Source Level Debugging at the early stage of the UEFI boot process.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12136 6f19259b-4bc3-4df7-8a09-765794883524
It was previously returning '0' written bytes that was interprating by the higher
layers as a failing operation.
Fix proposed by Eugene Cohen (HP)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12026 6f19259b-4bc3-4df7-8a09-765794883524
This library that uses the DebugAgentLib interface prints the loaded addresses
of the SEC and PEI_CORE module using PeCoffExtraActionLib.
Note: Because there is no PE loader for these XIP modules, PeCoffExtraActionLib is not invoked.
This library scans the firmware volume to find these modules and calculate their fixup loaded
addresses used to load their symbols in the debugger.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12023 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
If a FDT blob is passed to the kernel it is required we can load it.
If we fail to load the binary then we must abort the Linux booting
process.
ArmPkg/CpuDxe: Ensure the reset vector passed to the CP15 VBAR register is aligned on the right boundary
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11968 6f19259b-4bc3-4df7-8a09-765794883524
The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).
ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h
- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
This gIdleLoopEventGuid event signals the Cpu that it should go into
the idle state waiting for any events.
CpuSleep() is used in this implementation to make the Cpu wait for
the next interrupt (WFI instruction).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11863 6f19259b-4bc3-4df7-8a09-765794883524
Declare the system memory provided by the first Resource Memory HOB
as cached memory to the MMU.
All the remaining memory space is declared as Device Memory.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11861 6f19259b-4bc3-4df7-8a09-765794883524
Previously the CPU driver had a dependency on the GIC driver.
But by design is should be the opposite. The CPU driver installs the
CPU protocol that exposes the exception registration function.
And then, the interrupt controller registers its IRQ handler through
this interface.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11860 6f19259b-4bc3-4df7-8a09-765794883524
The errors were:
- uncaught returned error
- used of uninitialized variables
ArmPlatformPkg/Bds: Implement the update of MemMap Boot Device
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11830 6f19259b-4bc3-4df7-8a09-765794883524
With this change, we now have these following PCDs values to define the
location of the Secure and Normal firmwares:
- gArmTokenSpaceGuid.PcdSecureFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdSecureFv(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFv(BaseAddress|Size)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11806 6f19259b-4bc3-4df7-8a09-765794883524
The previous version was using the string representation of the Device Path.
This new version takes as paramater the binary representation of the Device Path
It also tries to detect which kind of device support it refers by using the remaining
part of the Device Path after it has been loaded by gBS->ConnectController()
Lots of bug have been fixed as well in this new version.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11799 6f19259b-4bc3-4df7-8a09-765794883524
This implementation use the Tpidrurw software context register to
store the PEI Services Table Pointer.
The author of this patch is Eugene Cohen (HP).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11750 6f19259b-4bc3-4df7-8a09-765794883524
oliviermartin