The existing HardwareInterrupt protocol lacks the means to configure
the level/edge and polarity properties of an interrupt. So introduce a
new protocol HardwareInterrupt2, and add some new members that allow
manipulation of those properties.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Parse QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION from the bridges'
conventional config spaces. Translate the fields as follows:
* BusNumbers:
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- reserve the requested value. (NB, bus number reservation
is not supposed to work before
<https://bugzilla.tianocore.org/show_bug.cgi?id=656> is fixed.)
* Io:
* 0 -- no reservation;
* (-1) -- keep our current default (512B);
* otherwise -- round up the requested value and reserve that.
* NonPrefetchable32BitMmio:
* 0 -- no reservation;
* (-1) -- keep our current default (2MB);
* otherwise -- round up the requested value and reserve that.
* Prefetchable32BitMmio:
* 0 -- no reservation, proceed to Prefetchable64BitMmio;
* (-1) -- firmware default, i.e. no reservation, proceed to
Prefetchable64BitMmio;
* otherwise -- round up the requested value and reserve that. (NB, if
Prefetchable32BitMmio is reserved in addition to
NonPrefetchable32BitMmio, then PciBusDxe currently runs into an
assertion failure. Refer to
<https://bugzilla.tianocore.org/show_bug.cgi?id=720>.)
* Prefetchable64BitMmio:
* only reached if Prefetchable32BitMmio was not reserved;
* 0 -- no reservation;
* (-1) -- firmware default, i.e. no reservation;
* otherwise -- round up the requested value and reserve that.
If QEMU_PCI_BRIDGE_CAPABILITY_RESOURCE_RESERVATION is missing, plus any
time the rounding fails, fall back to the current defaults.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Extract the SetIoPadding() and SetMmioPadding() functions, so that we can
set EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR fields using parameter names and
values that are more friendly than the original field names and their
expected values.
Introduce the HighBitSetRoundUp32() and HighBitSetRoundUp64() functions
for calculating the last parameter ("SizeExponent") of SetIoPadding() and
SetMmioPadding().
Put the new functions to use when requesting the default reservations. (In
order to be consistent with a later patch, "SizeExponent" is calculated
for SetIoPadding() with HighBitSetRoundUp64().)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PciHotPlugInitDxe has a static variable called "mPadding" (of type
RESOURCE_PADDING), which describes two constant resource reservations:
- MmioPadding: 2MB of non-prefetchable (hence 32-bit) MMIO space,
- IoPadding: 512B of IO space.
In the GetResourcePadding() member function of
EFI_PCI_HOT_PLUG_INIT_PROTOCOL, the driver outputs a dynamically allocated
verbatim copy of "mPadding", for PciBusDxe to consume in its
ApplyResourcePadding() function.
In a later patch, we're going to compose the set of resource reservations
dynamically, based on QEMU hints. Generalize the RESOURCE_PADDING
structure so that we may generate (or not generate) each resource type
individually:
- Replace the named "MmioPadding" and "IoPadding" fields in
RESOURCE_PADDING with an array of descriptors,
- remove "mPadding",
- in GetResourcePadding(), request the same (default) reservations as
before, as if we attempted and failed to fetch the QEMU hints.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The non-prefetchable MMIO aperture of a bridge can never fall outside of
the 32-bit address space. Namely, the MemoryBase and MemoryLimit fields in
PCI_BRIDGE_CONTROL_REGISTER have type UINT16, and based on the PCI-to-PCI
Bridge Architecture Spec, Chapter 3.2, the actual MMIO aperture is
determined as in:
NonPrefetchMemoryBase = (((MemoryBase & 0xFFF0u) >> 4) << 20) | 0x00000
NonPrefetchMemoryLimit = (((MemoryLimit & 0xFFF0u) >> 4) << 20) | 0xFFFFF
In "OvmfPkg/PciHotPlugInitDxe", the
"mPadding.MmioPadding.AddrSpaceGranularity" field is currently initialized
to 64. According to the above, this is useless generality: a
non-prefetchable MMIO reservation may only be satisfied from 32-bit
address space. Update the field to 32.
In practice this change makes no difference, because PciBusDxe already
enforces the 32-bit limitation when it sees "non-prefetchable" from
(SpecificFlag==0). Quoting commit 8aba40b792 ("OvmfPkg: add
PciHotPlugInitDxe", 2016-06-30): "regardless of our request for 64-bit
MMIO reservation, it is downgraded to 32-bit".
(See the Platform Init Spec 1.6, Volume 5,
- Table 8. "ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage", and
- Table 11. "Memory Resource Flag (Resource Type = 0) Usage",
for an explanation of the "mPadding.MmioPadding" fields.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The driver always produces an instance of the
EFI_PCI_HOT_PLUG_INIT_PROTOCOL. The "SOMETIMES_PRODUCES" remark is an
oversight from the original v1->v2 patch update; v2 should have stated
"ALWAYS_PRODUCES":
http://mid.mail-archive.com/1468242274-12686-5-git-send-email-lersek@redhat.com
> Notes:
> v2:
> - drop the PcdPciBusHotplugDeviceSupport check, and the PcdLib
> dependency with it [Jordan]
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Fixes: 8aba40b792
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QEMU has recently gained the ability to provide various hints about its
PCI bridges. The hints take the form of vendor-specific PCI capabilities.
Define macros and types under "OvmfPkg/Include/IndustryStandard" to
describe these capabilities.
The definitions correspond to "docs/pcie_pci_bridge.txt" in the QEMU tree.
Said documentation was added in the last commit of the following series:
a35fe226558a hw/pci: introduce pcie-pci-bridge device
70e1ee59bb94 hw/pci: introduce bridge-only vendor-specific capability to
provide some hints to firmware
226263fb5cda hw/pci: add QEMU-specific PCI capability to the Generic PCI
Express Root Port
c1800a162765 docs: update documentation considering PCIE-PCI bridge
We are going to parse the Resource Reservation Capability in
OvmfPkg/PciHotPlugInitDxe, and return the reservation requests to
PciBusDxe.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Revision 2.2 of the PCI Spec defines Capability IDs 0 through 6,
inclusive, in Appendix H. It reserves IDs 7 through 255.
Revision 2.3 of the PCI Spec adds Capability IDs 7 through 0xC, inclusive,
in Appendix H. Capability ID 9 stands for "Vendor Specific".
Add the EFI_PCI_CAPABILITY_ID_VENDOR macro and the
EFI_PCI_CAPABILITY_VENDOR_HDR structure type to MdePkg/IndustryStandard,
in order to describe this capability header.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Per PI 1.6 we added an FV Extended Header entry that would contain the
size of the FV that was in use.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to fix an assert issue during booting IA32 platforms
such as OvmfIa32 or Quark. This issue is caused by trying to access
page table on a platform without page table. A check is added to
avoid the assert.
Bug tracker: https://bugzilla.tianocore.org/show_bug.cgi?id=724
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
The debug messages can help developer to know the pre-memory
allocation usage.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=699
Within function AhciModeInitialization(), left shift operations of 'BIT0'
in the following statements:
"if ((PortImplementBitMap & (BIT0 << Port)) != 0) {"
will incur possible out of range left shift when Port is 31, since
"1 << 31" is possible to exceed the range of type 'int' (signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast 'BIT0' with UINT32 to resolve this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=698
Within function NetRandomInitSeed(), left shift a negative value is used
in:
"~Time.Hour << 24"
which involves undefined behavior.
Since Time.Hour is of type UINT8 (range from 0 to 23), hence ~Time.Hour
will be a negative value (of type int, signed).
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit will remove the '~' operator before 'Time.Hour', since it
seems like an implementation choice for generating the seed.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Qin Long <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=695
Within function CoreRestoreTpl(), left shift a negative value -2 is used
in:
"while (((-2 << NewTpl) & gEventPending) != 0) {"
which involves undefined behavior.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit refines the code logic to avoid left shifting the negative
value.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=702
Within function InternalPrintLibSPrintMarker(), possible left shift of a
negative value is found in:
"(*(ArgumentString + 1) << 8)"
which involves undefined behavior.
Since '*(ArgumentString + 1)' is of type CONST CHAR8 (signed), it will be
promoted to type int (signed) during the left shift operation. If
'*(ArgumentString + 1)' is a negative value, the behavior will be
undefined.
According to the C11 spec, Section 6.5.7:
> 4 The result of E1 << E2 is E1 left-shifted E2 bit positions; vacated
> bits are filled with zeros. If E1 has an unsigned type, the value
> of the result is E1 * 2^E2 , reduced modulo one more than the
> maximum value representable in the result type. If E1 has a signed
> type and nonnegative value, and E1 * 2^E2 is representable in the
> result type, then that is the resulting value; otherwise, the
> behavior is undefined.
This commit explicitly cast '*(ArgumentString + 1)' with UINT8 to resolve
this issue.
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current implementation deletes the "BootNext" before calling
any PlatformBootManagerLib APIs, but if system resets in
PlatformBootManagerLib APIs, "BootNext" is not consumed but lost.
The patch defers the deletion of "BootNext" to before booting it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Correct the help message to match that defined in Shell spec.
In 'DISCONNECT -r [-nc]' case, '-r' is not optional.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Help message of "dh" gives an example to display all handles
with "Image" protocol but actually "LoadedImage" protocol should
be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Replace hard-coded machine code with equivalent assembly source code.
Changes tested by checking for machine code equivalence by disassembling
the original and changed code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
V2:
Change function parameter to avoid touch global info in function.
Enhance function name, make it more user friendly
V1:
Refine code to avoid duplicate code to set processor register.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In S3 resume path, current implementation do 2 separate INIT-SIPI-SIPI,
this is not necessary. This change combine these 2 INIT-SIPI-SIPI to 1
and add CpuPause between them.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=655
V2 change:
Put some strings into the UNI file for localization.
The dump information will include:
a. The type of the partition (Mbr, Gpt or Other);
b. Whether the partition is an EFI System Partition.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The current implementation has a typo that maps SmmPciRootBridgeIo
to "PciRootBridgeIo".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In NetbufTrim() function, the NetBuf TotalSize should be checked with 0 before
making the trim operation, otherwise the function will fall into infinite loop.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Use 2-level format to display signature list and signature data.
Support batch delete operation to delete signature list or signature data.
Display more useful information for each signature data.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Long Qin <qin.long@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
The patch dynamically enables Bus Master on P2P bridges only
when requested by a device driver through PciIo.Attribute() to enable
the Bus Master.
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Several PP operations < 128(Vendor Specific) are reserved or unimplemented.
Follow TCG PC Client Platform Physical Presence Interface Specification to return
not implemented.
https://trustedcomputinggroup.org/wp-content/uploads/Physical-Presence-Interface_1-30_0-52.pdf
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The bug is introduced by 1b8eca to collect single module's build time.
Now the fix solution is copied from Platform build.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Within function GetAllocationDescriptorLsn():
The call to GetPdFromLongAd() may return NULL and it will be later
dereferenced in GetShortAdLsn().
This commit adds ASSERT to resolve the potential NULL pointer
dereference.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Add three new options:
--hash enables hash-based caching during build process. when --hash is
enabled, build tool will base on the module hash value to do the
incremental build, without --hash, build tool will base on the
timestamp to do the incremental build. --hash option use md5 method to
get every hash value, DSC/FDF, tools_def.txt, build_rule.txt and build
command are calculated as global hash value, Package DEC and its
include header files are calculated as package hash value, Module
source files and its INF file are calculated as module hash value.
Library hash value will combine the global hash value and its dependent
package hash value. Driver hash value will combine the global hash
value, its dependent package hash value and its linked library hash
value.
When --hash and --binary-destination are specified, build tool will
copy generated binary files for each module into the directory specified
by binary-destination at the build phase. Binary-destination directory
caches all generated binary files.
When --hash and --binary-source are specified, build tool will try to
get the binary files from the binary source directory at the build
phase.If the cached binary has the same hash value, it will be directly
used. Otherwise, build tool will compile the source files and generate
the binary files.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ConfigData parameter initialized in *GetConfigData function should not be NULL in
later *Support, *Initilize function, so just add ASSERT code check in these functions.
Cc: Ming Shao <ming.shao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
A lack of reviewers with Xen experience for OvmfPkg has been expressed.
The Xen community has put forward two volunteers.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Follow PI 1.6 spec to support FFS_ATTRIB_DATA_ALIGNMENT_2 for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow PI 1.6 spec to support FFS_ATTRIB_DATA_ALIGNMENT_2 for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Follow PI 1.6 spec to add FFS_ATTRIB_DATA_ALIGNMENT_2 definition for
FFS alignment extended to support maximum 16MB.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the build report, we add AutoGen Phase, Make Phase and GenFds Phase
time duration in the Platform Summary section, and we also add a item
in Module section to display module and library's build time.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Do not reserve entire block device size for an UDF file system -
instead, reserve the appropriate space (UDF logical volume space) for
it.
Additionally, only create a logical partition for UDF logical volumes
that are currently supported by EDK2 UDF file system implementation. For
instance, an UDF volume with a single LVD and a single Physical (Type 1)
Partition will be supported.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This patch adds a few more UDF volume structures in order to detect an
UDF file system which is supported by current EDK2 UDF file system
implementation in Partition driver.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Hao Wu <hao.a.wu@intel.com>
Build-tested-by: Star Zeng <star.zeng@intel.com>
Build-tested-by: Paulo Alcantara <paulo@hp.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current FFS only supports 64KiB alignment for data, Per PI 1.6
requirement, we extend FFS alignment to 16M.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ard Biesheuvel
Evan Lloyd
Laszlo Ersek
Yunhua Feng
Jian J Wang
Star Zeng
Hao Wu
Ruiyu Ni
Chris Ruffin
Eric Dong
Dandan Bi
Jiaxin Wu
Huajing Li
Fu Siyuan
chenc2
Zhang, Chao B
Yonghong Zhu
Leif Lindholm
Paulo Alcantara