Instead of cleaning the data cache to the PoU by virtual address and
subsequently invalidating the entire I-cache, invalidate only the
range that we just cleaned. This way, we don't invalidate other
cachelines unnecessarily.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
On ARM, manipulating live page tables is cumbersome since the architecture
mandates the use of break-before-make, i.e., replacing a block entry with
a table entry requires an intermediate step via an invalid entry, or TLB
conflicts may occur.
Since it is not generally feasible to decide in the page table manipulation
routines whether such an invalid entry will result in those routines
themselves to become unavailable, use a function that is callable with
the MMU off (i.e., a leaf function that does not access the stack) to
perform the change of a block entry into a table entry.
Note that the opposite should never occur, i.e., table entries are never
coalesced into block entries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
The macros EL1_OR_EL2() and EL1_OR_EL2_OR_EL3() allow conditional execution
of assembly sequences based on the current exception level, by jumping to
caller supplied labels 1f, 2f or 3f. However, the jump to 1f is actually
a fallthrough, which means the EL1 code needs to follow right after the
macro invocation, and the 1f label is ignored.
So let's fix this by making all jumps explicit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Add ArmReadHcr() to ArmLib to enable read-modify-write of the HCR system
register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Architecturally, the TTBCR register value is undefined at reset for
Non-Secure.
On some platforms the reset value for TTBCR is not zero and
this causes a data abort exception once the MMU is enabled.
This patch configures the TTBCR register to enable translation table
walk using TTBR0.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Unfortunately, Clang does not support the use of symbol references in .org
directives, and bails with the following error message when it encounters
them:
<...>:error: expected assembly-time absolute expression
.org DebugAgentVectorTable + 0x000
So replace the .org arguments with absolute values, and move the whole
vector table into a subsection with the appropriate alignment, and
starting at .org 0x0. This gives the same protection with respect to
entries that exceed 128 bytes, in a way that Clang supports as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19303 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates the ArmPkg variant of InvalidateInstructionCacheRange to
flush the data cache only to the point of unification (PoU). This improves
performance and also allows invalidation in scenarios where it would be
inappropriate to flush to the point of coherency (like when executing code
from L2 configured as cache-as-ram).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Added AARCH64 and ARM/GCC implementations of the above.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19174 6f19259b-4bc3-4df7-8a09-765794883524
In response to Leif's request earlier, this adds a new RVCT assembler
macro to centralize the exporting of assembly functions including the
EXPORT directive (so the linker can see it), the AREA directive (so
it's in its own section for code size reasons) and the function label
itself.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19098 6f19259b-4bc3-4df7-8a09-765794883524
The SetPrimaryStack and InitializePrimaryStack macros are no longer
used now that we removed support for ArmPlatformGlobalVariableLib.
So remove the various versions of them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19004 6f19259b-4bc3-4df7-8a09-765794883524
In ArmLib, there exists an alias for ArmDataSynchronizationBarrier,
named after one of several names for the pre-ARMv6 cp15 operation that
was formalised into the Data Synchronization Barrier in ARMv6.
This alias is also the one called from within ArmLib, in preference of
the correct name. Through the power of code reuse, this name slipped
into the AArch64 variant as well.
Expunge it from the codebase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18915 6f19259b-4bc3-4df7-8a09-765794883524
We currently rely on .align directives to ensure that each exception
vector entry is the appropriate offset from the vector base address.
This is slightly fragile, as were an entry to become too large (greater
than 32 A64 instructions), all following entries would be silently
shifted until they meet the next alignment boundary. Thus we might
execute the wrong code in response to an exception.
To prevent this, introduce a new macro, VECTOR_ENTRY, that uses .org
directives to position each entry at the precise required offset from
the base of a vector. A vector entry which is too large will trigger a
build failure rather than a runtime failure which is difficult to debug.
For consistency, the base and end of each vector is similarly annotated,
with VECTOR_BASE and VECTOR_END, which provide the necessary alignment
and symbol exports. The now redundant directives and labels are removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18904 6f19259b-4bc3-4df7-8a09-765794883524
As EDK2 runs in an idmap, we do not use TTBR1_EL1, nor do we configure
it. TTBR1_EL1 may contain UNKNOWN values if it is not programmed since
reset.
Prior to enabling the MMU, we do not set TCR_EL1.EPD1, and hence the CPU
may make page table walks via TTBR1_EL1 at any time, potentially using
UNKNOWN values. This can result in a number of potential problems (e.g.
the CPU may load from MMIO registers as part of a page table walk).
Additionally, in the presence of Cortex-A57 erratum #822227, we must
program TCR_EL1.TG1 == 0b1x (e.g. 4KB granule) regardless of the value
of TCR_EL1.EPD1, to ensure that EDK2 can make forward progress under a
hypervisor which makes use of PAR_EL1.
This patch ensures that we program TCR_EL1.EPD1 and TCR_EL1.TG1 as above
to avoid these issues. TCR_EL1.TG1 is set to 4K for all targets, as any
CPU capable of running EDK2 must support this granule, and given
TCR_EL1.EPD1, programming the field is not detrimental in the absence of
the erratum.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18903 6f19259b-4bc3-4df7-8a09-765794883524
Bits 0 and 6 of the TTBRx system registers have different meanings
depending on whether a system implements the Multiprocessing
Extensions. So use separate memory attribute definitions for MP and
non-MP.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18899 6f19259b-4bc3-4df7-8a09-765794883524
The definition of TTBR_NON_INNER_CACHEABLE should be bit 0 cleared, not
bit 0 set. Furthermore, the name is inconsistent with the other definitions
so rename it to TTBR_INNER_NON_CACHEABLE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18898 6f19259b-4bc3-4df7-8a09-765794883524
To align with the way normal cacheable memory is mapped, set the
shareable bit for cached accesses performed by the page table walker.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18896 6f19259b-4bc3-4df7-8a09-765794883524
The definition TTBR_WRITE_THROUGH_NO_ALLOC makes little sense, since
a) its meaning is unclear in the context of TTBRx, since write through
always implies Read-Allocate and no Write-Allocate
b) its definition equals the definition of TTBR_WRITE_BACK_ALLOC
So instead, rename it to TTBR_WRITE_THROUGH and update the definition
to reflect the name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18893 6f19259b-4bc3-4df7-8a09-765794883524
To prevent speculative intruction fetches from MMIO ranges that may
have side effects on reads, the architecture requires device mappings
to be created with the XN or UXN/PXN bits set (for the ARM/EL2 and
EL1&0 translation regimes, respectively.)
Note that, in the ARM case, this involves moving all accesses to a
client domain since permission attributes like XN are ignored from
a manager domain. The use of a client domain is actually mandated
explicitly by the UEFI spec.
Reported-by: Heyi Guo <heyi.guo@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18891 6f19259b-4bc3-4df7-8a09-765794883524
The function GcdAttributeToArmAttribute() is not used anywhere in the
code base, and is only defined for AARCH64 and not for ARM. It also
fails to set the bits for shareability and non-executability that we
require for correct operation. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18888 6f19259b-4bc3-4df7-8a09-765794883524
Mark all cached memory mappings as shareable (or inner shareable on
AArch64) so that our view of memory is kept coherent by the hardware.
This is relevant for things like coherent DMA and virtualization (where
a guest may migrate to another core) but in general, since UEFI on ARM
is mostly used in a context where the secure firmware and possibly a
secure OS are already up and running, it is best to refrain from using
any non-shareable mappings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18778 6f19259b-4bc3-4df7-8a09-765794883524
Add a function to ArmLib that provides access to the Cache Writeback
Granule (CWG) field in CTR_EL0. This information is required when
performing non-coherent DMA.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18758 6f19259b-4bc3-4df7-8a09-765794883524
The ARM architecture does not allow the actual geometries of the caches
to be inferred from the CCSIDR cache info system register, since the
geometry it reports is intended for performing cache maintenance by
set/way and nothing else. Since the ArmLib cache info routines are
based solely on CCSIDR contents, they should not be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18753 6f19259b-4bc3-4df7-8a09-765794883524
The function ArmCleanDataCacheToPoU() has no users, and its purpose
is unclear, since it uses cache maintenance by set/way to perform
the clean to PoU, which is a dubious practice to begin with. So
remove the declaration and all definitions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18752 6f19259b-4bc3-4df7-8a09-765794883524
The ARM9 ArmLib implementation is not referenced anywhere in the
tree, and unlikely to be useful going forward, considering that
ARM9 outdates even ARMv6. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18750 6f19259b-4bc3-4df7-8a09-765794883524
In ArmPkg/Include/Chipset, several CPU-specific header files reside.
Most of these provide no actual, or very little, use.
ARM1176JZ-S.h is not used at all (and unusable since SVN r18237).
ArmAemV8.h simply includes AArch64.h.
ArmCortexA15.h defines one processor-specific configuration bit and
then includes ArmV7.h.
Delete these include files, and update their sole users to function
without them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18736 6f19259b-4bc3-4df7-8a09-765794883524
Use the refactored UpdateRegionMapping () to traverse the translation
tables, splitting block entries along the way if required, and apply
a mask + or on each to set or clear the PXN/UXN/XN or RO bits.
For now, the 32-bit ARM versions remain unimplemented.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18587 6f19259b-4bc3-4df7-8a09-765794883524
The non-privileged execute never (UXN) page table bit defined for the
EL1&0 translation regime and the execute never (XN) bit defined for the
EL2 and EL3 translation regimes happen to share the same bit position,
but they are in fact defined distinctly by the architecture. So define
both bits explicitly, and add comments in places where we take advantage
of the fact that they share the same bit position.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18585 6f19259b-4bc3-4df7-8a09-765794883524
No platforms use the ARMv6 (ARM11) support code anymore. In fact, the
only reference to it in ArmPkg.dsc was commented out by Andrew in SVN
r11298 (2011-02-03) so it may well be broken. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18237 6f19259b-4bc3-4df7-8a09-765794883524
The current implementation of ArmGicGetSupportedArchRevision ()
that is used by all ARM platforms is entirely stateless (in order
to support being executed from flash) so it needs to interrogate
the hardware for the supported GIC revision upon each invocation.
However, this statelessness is only needed for SEC type modules;
in all other cases, we could easily determine the GIC revision once,
and store the result in a global variable.
In preparation of having separate early and normal versions, this patch
introduces the ArmGicArchLib library class and default implementation,
and moves the existing ArmGicGetSupportedArchRevision () into it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18098 6f19259b-4bc3-4df7-8a09-765794883524
Before splitting off ArmGicArchLib and moving it out of
ArmPkg/Drivers/ArmGic into ArmPkg/Library, make sure that the
GIC specific declarations it depends on are not hidden away in
local headers "GicV2/GicV2Lib.h" and "GicV3/GicV3Lib.h".
So merge them with <Library/ArmGicLib.h>. This is entirely
appropriate, since this is not a header that declares a public
interface into ArmGicLib, but defines implementation internals.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18097 6f19259b-4bc3-4df7-8a09-765794883524
This change removes the embedded Linux Loder from BdsLib.
BdsLib becomes OS agnostic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17969 6f19259b-4bc3-4df7-8a09-765794883524
Replaced the function BdsLoadApplication() by two explicit
functions that load the EFI application either by its GUID
or its Name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17966 6f19259b-4bc3-4df7-8a09-765794883524
The VA address space has a maximum address width of 48 bits in
AArch64 state; 48 bits address width limit will provide better
compatibility than 40 bits for future CPU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17526 6f19259b-4bc3-4df7-8a09-765794883524
Since there is now a formal definition of EFI_LOAD_OPTION, we can no
longer typedef it as a UINT8*. So update the code to use the common
definition, which is not a pointer type, hence the additional changes
to the C code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17410 6f19259b-4bc3-4df7-8a09-765794883524
Other libraries/modules could use it (eg: EFI Shell command `runaxf`).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17297 6f19259b-4bc3-4df7-8a09-765794883524
Remove the option to update the "Fdt" UEFI variable in the ARM BDS as
the "setfdt" EFI Shell command provides this service from now.
Remove the use of this variable in the legacy kernel boot loader and
use the FDT installed in the configuration table instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16940 6f19259b-4bc3-4df7-8a09-765794883524
The MIDR register of the CPU on which the UEFI firmware is running on
is used to infer if the platform is a Juno r0 or a Juno r1. The right
device path to the platform FDT is then stored in the
"gEmbeddedTokenSpaceGuid.PcdFdtDevicePaths" dynamic PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16939 6f19259b-4bc3-4df7-8a09-765794883524
The GICv3 driver must use native mode to drive a GICv3 due to
the fact that v2 compatibility is optional in the v3 spec.
However, if v2 compatibility is implemented, it is the default
and needs to be disabled first by setting the Affinity Routing
Enable (ARE) bit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
[added PCD that allows forcing the GICv3 driver to drive the GIC in v2 mode]
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16875 6f19259b-4bc3-4df7-8a09-765794883524
GICv3 controller with no GICv2 legacy support must use the GIC
Redistributor registers instead of the GIC Distributor registers
for some operations (eg: enable/disable interrupts).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16874 6f19259b-4bc3-4df7-8a09-765794883524
ARM GICv3 specification introduces some new components and registers.
This patch adds their definitions.
The most important GICv3 component is the GIC Redistributor. It supports
LPIs (Locality-specific peripheral Interrupt), 8+ CPU configuration.
Some GIC distributor registers have moved to the GIC redistributor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16872 6f19259b-4bc3-4df7-8a09-765794883524
The CPU affinity fields are defined by MPIDR/MPIDR_EL1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16871 6f19259b-4bc3-4df7-8a09-765794883524
The top of the stack always points to 'stack_base + stack_size'.
But the stack pointer is decremented before writing to the stack.
It means the top byte of the stack is actually 'stack_base + stack_size - 1'.
The initialization should also decrement the stack pointer before
zero'ing the memory (pre-indexed addressing).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16518 6f19259b-4bc3-4df7-8a09-765794883524
ArmInvalidateInstructionAndDataTlb() was doing the same thing as
ArmInvalidateTlb().
Both invalidate Data and Instruction TLBs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16253 6f19259b-4bc3-4df7-8a09-765794883524
Add library functions to rename a file and get a temporary name
for a file through the semi-hosting interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16238 6f19259b-4bc3-4df7-8a09-765794883524
Change mnemonic SEMIHOST_FILE_MODE_CREATE with mnemonic SEMIHOST_FILE_MODE_UPDATE.
The bit referred to by this mnemonic is for the semi-hosting open mode code the
equivalent of the + in the ISO C fopen mode terminology. This allows to select the
so called update mode for which both read and write are allowed on the open file.
The mnemonic SEMIHOST_FILE_MODE_UPDATE is more in line with the ISO C fopen mode
terminology. A description of the ISO C fopen modes can be found here :
http://pubs.opengroup.org/onlinepubs/009695399/functions/fopen.html.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16237 6f19259b-4bc3-4df7-8a09-765794883524
This function returns the revision of the GIC Architecture.
Some GICv3 controllers can work in GICv2 mode. Switching to an
older GIC revision is driven by the higher level exception level.
This function allows code to support any GIC revision at runtime.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16231 6f19259b-4bc3-4df7-8a09-765794883524
This is a utility library closely modeled after ArmSmcLib, that allows
hypervisor call (HVC) instructions to be issued from C code.
Change-Id: I5f5c65f83e910ff98dbb2f5b031dad8c4f663daa
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16088 6f19259b-4bc3-4df7-8a09-765794883524