Bugzilla: 3415 (https://bugzilla.tianocore.org/show_bug.cgi?id=3415)
The GICv3 architecture supports up to 1020 ordinary interrupt
lines. The actual number of interrupts supported is described by the
ITLinesNumber field in the GICD_TYPER register. The total number of
implemented registers is normally calculated as
32*(ITLinesNumber+1). However, maximum value (0x1f) is a special case
since that would indicate that 1024 interrupts are implemented.
Add handling for this special case in ArmGicGetMaxNumInterrupts.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The 'cspell' CI test detected some small typos in ArmPkg.
Correct them.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
The #ifndef at the start of an include file should have
one postfix underscore, and no prefix underscore character
Some include guards have been modified to match the name of the
header file. Some comments have also been added on the closing
'#endif'.
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Commit: 142fa386eb
removes the ArmGicSecLib. The file ArmGic/ArmGicSecLib.c
was exclusively used by this library. Thus, this file should
also be removed.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The register address of GICR_IPRIORITYR is in SGI_base frame. Add
IPRIORITY_ADDRESS macro for getting GICR_IPRIORITYR address. Otherwise
GIC RAS error(Uncorrected software error) may report in ArmGicDxe.
This resolves BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3236
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/kvm guest on ThunderX2
Tested-by: Quan Nguyen <quan@os.amperecomputing.com>
Modify two macros to put "offset" in parentheses and remove
parentheses from "4 * offset".
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
When Affinity Routing enabled, the GICR_IPRIORITYR<n> is used to set
priority for SGIs and PPIs instead of GICD_IPRIORITYR<n>.
This patch calls ArmGicSetInterruptPriority() helper function when
setting priority to handle the difference.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
According to ARM IHI 0069F, section 11.9.18 GICD_IPRIORITYR<n>,
Interrupt Priority Registers, n = 0 - 254, when affinity routing is
enabled for the Security state of an interrupt, GICR_IPRIORITYR<n>
is used instead of GICD_IPRIORITYR<n> where n = 0 to 7 (that is, for
SGIs and PPIs).
As setting interrupt priority for SGIs and PPIs are handled using
difference registers depends on the mode, this patch instroduces
ArmGicSetInterruptPriority() helper function to handle the discrepancy.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Setting GICD_IROUTERn.IRM and GICD_IROUTERn.{Aff3,Aff2,Aff1,Aff0}
at the same time is nonsensical (see 8.9.13 in the GICv3 spec, which
says of GICD_IROUTERn.IRM that "When this bit is set to 1,
GICD_IROUTER<n>.{Aff3,Aff2,Aff1,Aff0} are UNKNOWN"). There is also no
guarantee that IRM is implemented (see GICD_TYPER.No1N which indicates
whether the implementation supports this or not).
Let's thus not set this bit, as we want all SPIs to be delivered to the
same CPU, and not be broadcast to all of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
"ArmGicDxe.inf" currently does not document how the protocols in the
[Protocols] section are used. Such comments help us analyze behavior, so
let's add them now.
- gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid are
always produced on the InterruptDxeInitialize() -> (GicV2DxeInitialize()
| GicV3DxeInitialize()) -> InstallAndRegisterInterruptService() call
path.
- gEfiCpuArchProtocolGuid is consumed in the CpuArchEventProtocolNotify()
protocol notify callback. (Technically this is "conditional"; however
the firmware cannot work without architectural protocols, so we can call
it unconditional.)
While at it, drop the gArmGicDxeFileGuid comment from FILE_GUID; we're
going to make that GUID uninteresting soon.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, the GIC driver has a static dependency on the CPU arch protocol
driver, so it can register its IRQ handler at init time. This means there
is a window between dispatch of the CPU driver and dispatch of the GIC
driver where any unexpected GIC state may trigger an interrupt which we
are not set up to handle yet. Note that this is even the case if we enter
UEFI with interrupts disabled at the CPU, given that any TPL manipulation
involving TPL_HIGH_LEVEL will unconditionally enable IRQs at the CPU side
regardless of whether they were enabled to begin with (but only as soon as
the CPU arch protocol is actually installed)
So let's reorder the GIC driver with the CPU driver, and let it run its
initialization that puts the GIC into a known state before enabling
interrupts. Move its installation of its IRQ handler to a protocol notify
callback on the CPU arch protocol so that it runs as soon as it becomes
available.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing HardwareInterrupt protocol lacked a means to configure the
level/edge properties of an interrupt. The new HardwareInterrupt2
protocol introduced this capability.
This patch updates the GIC drivers to provide the new interfaces.
The changes comprise:
Update to use HardwareInterrupt2 protocol
Additions to register info in ArmGicLib.h
Added new functionality (GetTriggerType and SetTriggerType)
The requirement for this change derives from a problem detected on ARM
Juno boards, but the change is of generic (ARM) relevance.
This commit is in response to review on the mailing list and, as
suggested there, rolls Girish's updates onto Ard's original example.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ArmGicLib API function GicGetCpuRedistributorBase () declares
GicCpuRedistributorBase to iterate over the redistributors of all
CPUs, but then inadvertently advances GicRedistributorBase instead.
Reported-by: "Oliyil Kunnil, Vishal" <vishalo@qti.qualcomm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the ACPI 6.0/6.1 spec, the physical base address of GICC,
GICD, GICR and GIC ITS is 64-bit. So change the type of the various GIC
base address PCDs to 64-bit, and fix up all users.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This commit fixes a bug in the GIC v2 and v3 drivers where the GICC_EOIR
(End Of Interrupt Register) is written twice for a single interrupt.
GicV(2|3)IrqInterruptHandler() calls the Interrupt Handler and then
GicV(2|3)EndOfInterrupt() on exit:
InterruptHandler = gRegisteredInterruptHandlers[GicInterrupt];
if (InterruptHandler != NULL) {
// Call the registered interrupt handler.
InterruptHandler (GicInterrupt, SystemContext);
} else {
DEBUG ((EFI_D_ERROR, "Spurious GIC interrupt: 0x%x\n", GicInterrupt));
}
GicV2EndOfInterrupt (&gHardwareInterruptV2Protocol, GicInterrupt);
although gInterrupt->EndOfInterrupt() can be expected to have already
been called by InterruptHandler() [which is the case for the primary
in-tree handler in TimerDxe]
The fix moves the EndOfInterrupt() call inside the else case for
unregistered/spurious interrupts. This removes a potential race
condition that might have lost interrupts.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike SGIs and PPIs, which are private to the CPU and are managed at
the redistributor level (which is also a per-CPU construct), shared
interrupts (SPIs) are shared between all CPUs, and therefore managed at
the distributor level (just as on GICv2).
Reported-by: Narinder Dhillon <ndhillonv2@gmail.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reassign all interrupts to non-secure Group-1 if the GIC has its DS
(Disable Security) bit set. In this case, it is safe to assume that we
own the GIC, and that no other firmware has performed any configuration
yet, which means it is up to us to reconfigure the interrupts so they
can be taken by the non-secure firmware.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
mGicNumInterrupts is the total number of interrupts, so the interrupt
ID equal to mGicNumInterrupts is also invalid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the function ArmGicEnableDistributor (), the Affinity Routing Enable
(ARE) bit, which essentially defines whether the GIC runs in v2 or v3
mode, is inadvertently cleared when enabling the GIC distributor if it
is running in v3 mode. So fix that.
Reported-by: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19274 6f19259b-4bc3-4df7-8a09-765794883524
This has the effect of splitting assembly functions into their own sections
so the linker can remove unused ones to save space.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19109 6f19259b-4bc3-4df7-8a09-765794883524
The GNU assembler extends the generic notation for IMPLEMENTATION
DEFINED system registers to support any system register, so that
system registers defined by newer versions of the architecture can
still be used by older versions of the toolchain.
Clang before v3.6 supports the generic notation, but does not
support this extension, nor does it need to in the particular case
of the GICv3 support code, since it knows the GICv3 registers by
their architectural names. So only redefine their real names to
their generic aliases if we are not using clang.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18192 6f19259b-4bc3-4df7-8a09-765794883524
The current implementation of ArmGicGetSupportedArchRevision ()
that is used by all ARM platforms is entirely stateless (in order
to support being executed from flash) so it needs to interrogate
the hardware for the supported GIC revision upon each invocation.
However, this statelessness is only needed for SEC type modules;
in all other cases, we could easily determine the GIC revision once,
and store the result in a global variable.
In preparation of having separate early and normal versions, this patch
introduces the ArmGicArchLib library class and default implementation,
and moves the existing ArmGicGetSupportedArchRevision () into it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18098 6f19259b-4bc3-4df7-8a09-765794883524
Before splitting off ArmGicArchLib and moving it out of
ArmPkg/Drivers/ArmGic into ArmPkg/Library, make sure that the
GIC specific declarations it depends on are not hidden away in
local headers "GicV2/GicV2Lib.h" and "GicV3/GicV3Lib.h".
So merge them with <Library/ArmGicLib.h>. This is entirely
appropriate, since this is not a header that declares a public
interface into ArmGicLib, but defines implementation internals.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18097 6f19259b-4bc3-4df7-8a09-765794883524
Accesses to system registers are disproportionately heavy-weight
when executed under virtualization, since each one involves two
world switches (from guest to host and back again).
So change the sequence that enables the GIC SRE interface so that
it performs only a single sysreg read to test whether the SRE
interface is enabled already, and only performs a write and an
additional read if that turns out not to be the case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17596 6f19259b-4bc3-4df7-8a09-765794883524
- GIC distributor needs to be programmed to target interrupts
on the boot CPU using the Interrupt Processor Targets Registers
- Enabling the GIC Distributor is different following the value
of GICD_CTLR.ARE_NS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16926 6f19259b-4bc3-4df7-8a09-765794883524
The GICv3 driver must use native mode to drive a GICv3 due to
the fact that v2 compatibility is optional in the v3 spec.
However, if v2 compatibility is implemented, it is the default
and needs to be disabled first by setting the Affinity Routing
Enable (ARE) bit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
[added PCD that allows forcing the GICv3 driver to drive the GIC in v2 mode]
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16875 6f19259b-4bc3-4df7-8a09-765794883524
GICv3 controller with no GICv2 legacy support must use the GIC
Redistributor registers instead of the GIC Distributor registers
for some operations (eg: enable/disable interrupts).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16874 6f19259b-4bc3-4df7-8a09-765794883524
CPU GIC Registributors are located next to each other in the GIC Redistributor
space.
The CPU GIC Redistributor is identified by its CPU affinity Aff3.Aff2.Aff1.Aff0.
This function returns the base address of the GIC Redistributor of
the calling CPU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16873 6f19259b-4bc3-4df7-8a09-765794883524
ARM GICv3 specification introduces some new components and registers.
This patch adds their definitions.
The most important GICv3 component is the GIC Redistributor. It supports
LPIs (Locality-specific peripheral Interrupt), 8+ CPU configuration.
Some GIC distributor registers have moved to the GIC redistributor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16872 6f19259b-4bc3-4df7-8a09-765794883524
Even if the CPU id registers indicate hardware support for the
System Register interface to the GIC, higher exception levels
may disable that interface and only allow access through MMIO.
So move the enabling of the SRE bit to the GIC version detection
routine: if we trigger an exception, we would have anyway at a
later stage, so the net effect is the same. However, if setting
the bit doesn't stick, it means we can switch to MMIO and proceed
normally otherwise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16344 6f19259b-4bc3-4df7-8a09-765794883524
This function returns the revision of the GIC Architecture.
Some GICv3 controllers can work in GICv2 mode. Switching to an
older GIC revision is driven by the higher level exception level.
This function allows code to support any GIC revision at runtime.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16231 6f19259b-4bc3-4df7-8a09-765794883524
Allow the PCDs gArmTokenSpaceGuid.PcdGicDistributorBase and
gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase to be redeclared
as PcdsDynamic by the platform, so virtual machines can set these
properties during boot. As the PcdGet32() calls now call into the
PCD database, cache the values that are required during the handling
of interrupts.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16072 6f19259b-4bc3-4df7-8a09-765794883524
This PCD has been replaced by ArmPlatformIsPrimaryCore() function.
Althrough this PCD is still used in some occasions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16026 6f19259b-4bc3-4df7-8a09-765794883524
The InterruptId has a different width for GicV2 and GicV3 (respectively
10bit and 24bit).
The function prototype has been changed to return this value to make the
caller GIC architecture version independent. Otherwise, we would have need
to expose a different mask to allow the caller to retrieve this value from
the read register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15628 6f19259b-4bc3-4df7-8a09-765794883524
The support for GIcV2 was already existing. This change separate the GicV2
specific functions from the common Gic code (in preparation for GicV3 support).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15626 6f19259b-4bc3-4df7-8a09-765794883524
Andreas Sandberg
Pierre Gondois
Ming Huang
Quan Nguyen
Laszlo Ersek
Michael D Kinney
Sami Mujawar
Ard Biesheuvel
Ming Huang
Evan Lloyd
Dennis Chen
Alexei Fedorov
Heyi Guo
Eugene Cohen
Olivier Martin
Ronald Cron