The commit is a follow-up of commit 8491e30.
In file MpService.c line 786:
Pte[Index] = (UINT64)((UINTN)PageTable + EFI_PAGE_SIZE * (Index + 1)) |
mAddressEncMask ...
(Where PageTable is of type VOID*, Index is of type UINTN, mAddressEncMask
is of type UINT64 and Pte[Index] is of type UINT64.)
Since in this case, the code logic ensures that the expression will not
exceed the range of UINTN, the commit will remove the explicit type cast
'(UINT64)'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when page tables entriees are created or modified.
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This patch sets the normal OS buffer EfiLoaderCode/Data,
EfiBootServicesCode/Data, EfiConventionalMemory, EfiACPIReclaimMemory
to be not present after SmmReadyToLock.
To access these region in OS runtime phase is not a good solution.
Previously, we did similar check in SmmMemLib to help SMI handler
do the check. But if SMI handler forgets the check, it can still
access these OS region and bring risk.
So here we enforce the policy to prevent it happening.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=277
The MTRR field was removed from PROCESS_SMM_DESCRIPTOR
structure in commit:
26ab5ac362
However, the references to the MTRR field in assembly
files were not removed. Remove the extern reference
to gSmiMtrr and set the Reserved14 field
of PROCESS_SMM_DESCRIPTOR to 0.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The following commit moved the initialization of the
default PROCESSOR_SMM_DESCRIPTOR from MpService.c to
SmramSaveState.c and made this initialization
conditional on the value returned by the
SmmCpuFeaturesGetSmiHandlerSize() library function.
f12367a0b1
This changed the behavior of the PiSmmCpuDxeSmm module.
The initialization of the PROCESSOR_SMM_DESCRIPTOR is
moved before the call to SmmCpuFeaturesGetSmiHandlerSize()
to preserve the previous behavior.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This patch fixes https://bugzilla.tianocore.org/show_bug.cgi?id=246
Previously, when SMM exception happens after EndOfDxe,
with StackGuard enabled on IA32, the #double fault exception
is reported instead of #page fault.
Root cause is below:
Current EDKII SMM page protection will lock GDT.
If IA32 stack guard is enabled, the page fault handler will do task switch.
This task switch need write busy flag in GDT, and write TSS.
However, the GDT and TSS is locked at that time, so the
double fault happens.
We decide to not lock GDT for IA32 StackGuard enabled.
This issue does not exist on X64, or IA32 without StackGuard.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=277
Remove dependency on layout of PROCESSOR_SMM_DESCRIPTOR
everywhere possible. The only exception is the standard
SMI entry handler template that is included with the
PiSmmCpuDxeSmm module. This allows an instance of the
SmmCpuFeaturesLib to provide alternate
PROCESSOR_SMM_DESCRIPTOR structure layouts.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=277
All CPUs use the same MTRR settings. Move MTRR settings
from a field in the PROCESSOR_SMM_DESCRIPTOR structure into
a module global variable.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Some semaphores are not cleared on S3 boot path. For example,
mSmmMpSyncData->CpuData[CpuIndex].Present. It may still keeps the value set at
SMM runtime during S3 resume. It may causes BSP have the wrong judgement on SMM
AP's present state.
We have one related fix at e78a2a49ee. But that is
not completed.
This fix is to clear Busy/Run/Present semaphores in InitializeMpSyncData().
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PiSmmCpu driver may split page for page attribute request.
Current logic not only propagates the super page attribute to
the leaf page attribut, but also to the directory page attribute.
However, the later might be wrong because we cannot clear protection
without touching directory page attribute.
The effective protection is the strictest combination
across the levels.
We should always clear protection on directory page and set
protection on leaf page for easy clearing later.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
"UefiCpuPkg/UefiCpuPkg.dec" already allows platforms to make
PcdCpuMaxLogicalProcessorNumber dynamic, however PiSmmCpuDxeSmm does not
take this into account everywhere. As soon as a platform turns the PCD
into a dynamic one, at least S3 fails. When the PCD is dynamic, all
PcdGet() calls translate into PCD DXE protocol calls, which are only
permitted at boot time, not at runtime or during S3 resume.
We already have a variable called mMaxNumberOfCpus; it is initialized in
the entry point function like this:
> //
> // If support CPU hot plug, we need to allocate resources for possibly
> // hot-added processors
> //
> if (FeaturePcdGet (PcdCpuHotPlugSupport)) {
> mMaxNumberOfCpus = PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
> } else {
> mMaxNumberOfCpus = mNumberOfCpus;
> }
There's another use of the PCD a bit higher up, also in the entry point
function:
> //
> // Use MP Services Protocol to retrieve the number of processors and
> // number of enabled processors
> //
> Status = MpServices->GetNumberOfProcessors (MpServices, &mNumberOfCpus,
> &NumberOfEnabledProcessors);
> ASSERT_EFI_ERROR (Status);
> ASSERT (mNumberOfCpus <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));
Preserve these calls in the entry point function, and replace all other
uses of PcdCpuMaxLogicalProcessorNumber -- there are only reads -- with
mMaxNumberOfCpus.
For PcdCpuHotPlugSupport==TRUE, this is an unobservable change.
For PcdCpuHotPlugSupport==FALSE, we even save SMRAM, because we no longer
allocate resources needlessly for CPUs that can never appear in the
system.
PcdCpuMaxLogicalProcessorNumber is also retrieved in
"UefiCpuPkg/Library/SmmCpuFeaturesLib/SmmCpuFeaturesLib.c", but only in
the library instance constructor, which runs even before the entry point
function is called.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=116
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This patch fixes the first part of
https://bugzilla.tianocore.org/show_bug.cgi?id=242
Previously, when SMM exception happens, "stack overflow" is misreported.
This patch checked the PF address to see it is stack overflow, or
it is caused by SMM page protection.
It dumps exception data, PF address and the module trigger the issue.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Move the declaration of these PCDs from the
[PcdsFixedAtBuild, PcdsPatchableInModule]
section of "UefiCpuPkg/UefiCpuPkg.dec" to the
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
section. Their types, default values, and token values remain unchanged.
Only UefiCpuPkg/PiSmmCpuDxeSmm consumes these PCDs, specifically on the
call stack of its entry point function, and it turns them into static or
dynamically allocated data in SMRAM:
PiCpuSmmEntry() [PiSmmCpuDxeSmm.c]
InitializeSmmTimer() [SyncTimer.c]
PcdCpuSmmApSyncTimeout
-> mTimeoutTicker
InitializeMpServiceData() [MpService.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
However, there's another call path to fetching "PcdCpuSmmSyncMode", namely
SmmInitHandler() [PiSmmCpuDxeSmm.c]
InitializeMpSyncData() [MpService.c]
PcdCpuSmmSyncMode
-> mSmmMpSyncData->EffectiveSyncMode
and this path is exercised during S3 resume (as stated by the comment in
SmmInitHandler() too, "Initialize private data during S3 resume").
While we can call the PCD protocol (via PcdLib) for fetching dynamic PCDs
in the entry point function, we cannot do that at S3 resume. Therefore
pre-fetch PcdCpuSmmSyncMode into a new global variable (which lives in
SMRAM) in InitializeMpServiceData(), just before calling
InitializeMpSyncData(). This way InitializeMpSyncData() can retrieve the
stashed PCD value from SMRAM, regardless of the boot mode.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=230
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
When XD is not supported, the BIT63 is reserved.
We should not set BIT63 in the page table.
Test OVMF IA32/IA32X64 with XD enabled/disabled.
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Once platform selects the incorrect instance, the caller could know it from
return status and ASSERT().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add volatile qualifier to mNumberToFinish to prevent GCC 5.4
compiler from optimizing away required logic in ACPI S3 resume.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Update TransferApToSafeState() use UINTN params to reduce the
number of type casts required in these calls. Also change
the NumberToFinish parameter from UINT32* to UINTN
NumberToFinishAddress to resolve issues with conversion from
a volatile pointer to a non-volatile pointer. The assembly
code that receives the NumberToFinishAddress value must treat
that memory location as a volatile to track the number of APs.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
PiSmmCpuDxeSmm consumes SmmAttributesTable and setup page table:
1) Code region is marked as read-only and Data region is non-executable,
if the PE image is 4K aligned.
2) Important data structure is set to RO, such as GDT/IDT.
3) SmmSaveState is set to non-executable,
and SmmEntrypoint is set to read-only.
4) If static page is supported, page table is read-only.
We use page table to protect other components, and itself.
If we use dynamic paging, we can still provide *partial* protection.
And hope page table is not modified by other components.
The XD enabling code is moved to SmiEntry to let NX take effect.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>
We will put APs into hlt-loop in safe code. But we decrease mNumberToFinish
before APs enter into the safe code. Paolo pointed out this gap.
This patch is to move mNumberToFinish decreasing to the safe code. It could
make sure BSP could wait for all APs are running in safe code.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
On S3 path, we may transfer to long mode (if DXE is long mode) to restore CPU
contexts with CR3 = SmmS3Cr3 (in SMM). AP will execute hlt-loop after CPU
contexts restoration. Once one NMI or SMI happens, APs may exit from hlt state
and execute the instruction after HLT instruction. If APs are running on long
mode, page table is required to fetch the instruction. However, CR3 pointer to
page table in SMM. APs will crash.
This fix is to disable long mode on APs and transfer to 32bit protected mode to
execute hlt-loop. Then CR3 and page table will no longer be required.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
On S3 path, we will wake up APs to restore CPU context in PiSmmCpuDxeSmm
driver. However, we place AP in hlt-loop under 1MB space borrowed after CPU
restoring CPU contexts.
In case, one NMI or SMI happens, APs may exit from hlt state and execute the
instruction after HLT instruction. But the code under 1MB is no longer safe at
that time.
This fix is to allocate one ACPI NVS range to place the AP hlt-loop code. When
CPU finished restoration CPU contexts, AP will execute in this ACPI NVS range.
https://bugzilla.tianocore.org/show_bug.cgi?id=216
v2:
1. Make stack alignment per Laszlo's comment.
2. Trim whitespace at end of end.
3. Update year mark in file header.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
GetProcessorLocation() is too generic and will conflict with the API defined in
Galileo Board Software Package v1.0.0.
This update is just to rename GetProcessorLocation() to one specific name
GetProcessorLocationByApicId().
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Kinney <Michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
1) Remove SmmGetProcessorLocation() from PiSmmCpuDxeSmm driver.
2) Remove ExtractProcessorLocation() from MpInitLib library.
3) Add GetProcessorLocation() to BaseXApicLib and BaseXApicX2ApicLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Michael Kinney <Michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <Michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
if PcdAcpiS3Enable is disabled, then skip S3 related logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
PiSmmCpuDxeSmm driver's entry point will get some PCDs supported dynamic type.
In case those PCDs are set as DynamicHii type in platform DSC File, it implies
that EFI Variable Arch protocol is required.
This fix is to add gEfiVariableArchProtocolGuid dependency on PiSmmCpuDxeSmm
driver to make sure those DynamicHii PCDs could be read correctly.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
The commit 8b9311 changed the zeroing of mSmmMpSyncData of type
SMM_DISPATCHER_MP_SYNC_DATA by the following patch.
- ZeroMem (mSmmMpSyncData, mSmmMpSyncDataSize);
+ mSmmMpSyncData->SwitchBsp = FALSE;
mSmmMpSyncDataSize not only includes SMM_DISPATCHER_MP_SYNC_DATA, but
also includes the SMM_CPU_DATA_BLOCK array and one BOOLEAN variable
array as shown here:
mSmmMpSyncDataSize = sizeof (SMM_DISPATCHER_MP_SYNC_DATA) +
(sizeof (SMM_CPU_DATA_BLOCK) + sizeof (BOOLEAN)) *
gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;
This patch restores the original ZeroMem() to clear all CPU Sync data.
The commit 8b9311 may cause unexpected behavior.
v2:
Mentioned CandidateBsp array in comments to make it more accurate.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Commits 28ee581646 and 246cd9085f added these ENDs as part of the
manual conversion from *.asm files. However, the ENDs makes no sense for
NASM. Although they don't break the build, NASM complains about them:
label alone on a line without a colon might be in error
(This NASM warning category dates back to NASM 0.95, commit
6768eb71d8deb.)
Remove the ENDs.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
CheckProcessorFeature() invokes MpService->StartupAllAps() to detect
XD/BTS features on normal boot path. It's not necessary and may cause
performance impact, because INIT-SIPI-SIPI must be sent to APs if APs
are in hlt-loop mode. XD/BTS feature detection is moved to
SmmInitHandler() in SMM relocation during normal boot path.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
It will be set to TRUE during S3 resume.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REGISTER_TYPE in UefiCpuPkg/Include/AcpiCpuData.h defines a MemoryMapped
enum value. However support for the MemoryMapped enum is missing from
the implementation of SetProcessorRegister(). This patch adds support
for MemoryMapped type SetProcessorRegister().
One spin lock is added to avoid potential conflict when multiple processor
update the same memory space.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
InitializeMpSyncData() invokes InitializeSmmCpuSemaphores() to allocate an
aligned buffer for all locks and semaphores. However, this function is
invoked on S3 resume path again to reset mSmmMpSyncData. It causes
an additional aligned buffer to be allocated.
This update moves InitializeSmmCpuSemaphores() into
InitializeMpServiceData() that is only invoked on normal boot.
InitializeMpSyncData() is updated to reset the locks/semaphore in
mSmmMpSyncData.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
A number of code locations use
ASSERT_EFI_ERROR (BooleanExpression)
instead of
ASSERT (BooleanExpression)
Fix them.
Cc: Jeff Fan <jeff.fan@intel.com>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Use 16bit and 32bit assembly code to replace hard code db.
In V2: add 0x67 prefixes to far jumps
Without the a32 modifier under FLAT32_JUMP, and the a16 modifier under
LONG_JUMP, nasm doesn't generate the 0x67 prefixes, and the far jumps
don't work. (For the former, KVM returns an emulation failure. For the
latter, KVM performs a triple fault (guest reboot).) By forcing the 0x67
prefixes we end up with the same machine code as the one open-coded in
"MpFuncs.asm".
This bug breaks S3 resume in the Ia32X64 + SMM_REQUIRE build of OVMF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/MpFuncs.asm to X64/MpFuncs.nasm
And, manually update it to pass build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Use 16bit assembly code to replace hard code db.
In V2:
Add 0x67 prefix to far jump
When we enter protected mode, with the far jump still in big real mode,
the JMP instruction not only needs the 0x66 prefix (for 32-bit operand
size), but also the 0x67 prefix (for 32-bit address size). Use the a32
nasm modifier to enforce this.
This bug breaks S3 resume in the Ia32 + SMM_REQUIRE build of OVMF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Hao Wu
Leo Duran
Jiewen Yao
Feng Tian
Dandan Bi
Michael Kinney
Jeff Fan
Laszlo Ersek
Star Zeng
Liming Gao