BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1808
In current code, the values of TopaEntryPtr->Uint64 for TopaTable
and the values of OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64
to register table write for RTIT_OUTPUT_BASE and RTIT_OUTPUT_MASK_PTRS
are not been initialized in whole. For example, the reserved bits in
OutputBaseReg.Uint64 are random that will cause GP fault like below
when SetProcessorRegister (in CpuFeaturesInitialize.c) sets register
based on register table.
!!!! X64 Exception Type - 0D(#GP - General Protection)
CPU Apic ID - 00000000 !!!!
ExceptionData - 0000000000000000
RIP -0000000064D69576, CS -0000000000000038, RFLAGS -0000000000010246
RAX -000000006B9F1001, RCX -0000000000000560, RDX -0000000000000000
RBX -0000000064EECA18, RSP -000000006CB82BA0, RBP -0000000000000008
RSI -0000000080000000, RDI -0000000000000011
R8 -000000006B9493D0, R9 -0000000000000010, R10 -00000000000000FF
R11 -000000006CB82A50, R12 -0000000064D70F50, R13 -0000000066547050
R14 -0000000064E3E198, R15 -0000000000000000
DS -0000000000000030, ES -0000000000000030, FS -0000000000000030
GS -0000000000000030, SS -0000000000000030
CR0 -0000000080010013, CR2 -0000000000000000, CR3 -000000006C601000
CR4 -0000000000000628, CR8 -0000000000000000
DR0 -0000000000000000, DR1 -0000000000000000, DR2 -0000000000000000
DR3 -0000000000000000, DR6 -00000000FFFF0FF0, DR7 -0000000000000400
GDTR -000000006B8CCF18 0000000000000047, LDTR -0000000000000000
IDTR -000000006687E018 0000000000000FFF, TR -0000000000000000
FXSAVE_STATE -000000006CB82800
And current code gets MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceInitialize() and uses their
values for all processors. But ProcTraceInitialize() is only executed
by BSP, that means the values just for BSP. For good practice, the code
should get MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceSupport (executed by all
processors), and then use them in ProcTraceInitialize() for all
processors. This can also resolve the issue that the values of
OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64 are not been
initialized in whole.
For TopaEntryPtr->Uint64, this patch updates code to initialize it
in whole explicitly by TopaEntryPtr->Uint64 = 0 before updating its
fields.
At the same time, this patch also eliminates the ProcTraceSupported
field in PROC_TRACE_PROCESSOR_DATA and the TopaMemArrayCount field in
PROC_TRACE_DATA.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1809
Current code disables TraceEn at the end of ProcTraceInitialize(),
then there will be much memory allocated even when ProcTrace feature
is disabled.
This patch updates code to disable TraceEn and return at the beginning
of ProcTraceInitialize() when when ProcTrace feature is disabled.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1679
The checking to CpuInfo->CpuIdVersionInfoEcx.Bits.AESNI is enough,
the checking to CPU generation could be removed, then the code
could be reused by more platforms.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
These files have \r\n line endings, but a few lines use \r\r\n which
is not a valid line ending. These lines were causing problems for git
and other tools.
Signed-off-by: Joe Richey <joerichey@google.com>
Review-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add a new instance of the MpInitLib that is designed for
uniprocessor platforms that require the use of modules
that depend on the MP_SERVICES_PROTOCOL for dispatch
or to retrieve information about the boot processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
GetProcessorLocation2ByApicId() extracts the
package/die/tile/module/core/thread ID from the initial APIC ID.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
Cc: Ray Ni <Ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdCpuFeaturesSupport used to specify the platform policy about
what CPU features this platform supports. This PCD will be used
in IsCpuFeatureSupported only.
Now RegisterCpuFeaturesLib use this PCD as an template to Get the
pcd size. Update the code logic to replace it with
PcdCpuFeaturesSetting.
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1375
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdCpuFeaturesUserConfiguration.
Merge PcdCpuFeaturesUserConfiguration into PcdCpuFeaturesSetting.
Use PcdCpuFeaturesSetting as input for the user input feature setting
Use PcdCpuFeaturesSetting as output for the final CPU feature setting
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1375
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V2 changes:
Update the commit message and comments in the code.
When waking vector buffer allocated by CpuDxe is tested by MemTest86
in MP mode, an error is reported because the same range of memory is
modified by both CpuDxe driver and MemTest86.
The waking vector buffer is not expected to be tested by MemTest86 if
it is allocated out because MemTest86 only tests free memory. But
current CpuDxe driver "borrows" buffer instead of allocate buffer for
waking vector buffer (through allocate & free to get the buffer
pointer, backup the buffer data before using it and restore it after
using). With this implementation, if the buffer borrowed is not used
by any other drivers, MemTest86 tool will treat it as free memory
and test it.
In order to fix the above issue, CpuDxe changes to allocate the
buffer below 1M instead of borrowing it. But directly allocating
memory below 1MB causes LegacyBios driver fails to start. LegacyBios
driver allocates memory range from
"0xA0000 - PcdEbdaReservedMemorySize" to 0xA0000 as Ebda Reserved
Memory. The minimum value for "0xA0000 - PcdEbdaReservedMemorySize"
is 0x88000. If LegacyBios driver allocate this range failed, it
asserts.
LegacyBios also reserves range from 0x60000 to
"0x60000 + PcdOpromReservedMemorySize", it will be used as Oprom
Reserve Memory. The maximum value for "0x60000 +
PcdOpromReservedMemorySize" is 0x88000. LegacyBios driver tries to
allocate these range page(4K size) by page. It just reports warning
message if some pages are already allocated by others.
Base on above investigation, one page in range 0x60000 ~ 0x88000 can
be used as the waking vector buffer.
LegacyBios driver only reports warning when page allocation in range
[0x60000, 0x88000) fails. This library is consumed by CpuDxe driver
to produce CPU Arch protocol. LagacyBios driver depends on CPU Arch
protocol which guarantees below allocation runs earlier than
LegacyBios driver.
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
.nasm file has been added for X86 arch. .S assembly code
is not required any more.
https://bugzilla.tianocore.org/show_bug.cgi?id=1594
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
.nasm file has been added for X86 arch. .S assembly code
is not required any more.
https://bugzilla.tianocore.org/show_bug.cgi?id=1594
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
.nasm file has been added for X86 arch. .S assembly code
is not required any more.
https://bugzilla.tianocore.org/show_bug.cgi?id=1594
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1621
According to Intel SDM as below, the BIT0 should be treated as
lock bit, and BIT1 should be treated as disable(1)/enable(0) bit.
"11b: AES instructions are not available until next
RESET.
Otherwise, AES instructions are available.
If the configuration is not 01b, AES
instructions can be mis-configured if a privileged agent
unintentionally writes 11b"
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
Should make sure the TotalSize of Microcode is aligned with 4 bytes
before calling CalculateSum32 function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The Microcode region indicated by MicrocodePatchAddress PCD may contain
more than one Microcode entry. We should save InCompleteCheckSum32 value
for each payload. Move the logic for calculate InCompleteCheckSum32 from
the outsize of the do-while loop to the inside.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576
The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.
If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.
Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.
Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.
Fixes: dcc026217f16b918bbaf
Test:
- Pass special test of accessing memory beyond 4G in SMM mode
- Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
Windows7, Windows10)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
Add information dump for Control Protection exception.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The following Microcode payload format is define in SDM spec.
Payload: |MicrocodeHeader|MicrocodeBinary|ExtendedHeader|ExtendedTable|.
When we verify the CheckSum32 with ExtendedTable, we should use the fields
of ExtendedTable to replace corresponding fields in MicrocodeHeader,
and then calculate the CheckSum32 with MicrocodeHeader+MicrocodeBinary.
This patch already verified on ICL platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1481
Today's MtrrLib contains a bug, for example:
when the original cache setting is WB for [0xF_0000, 0xF_8000) and,
a new request to set [0xF_0000, 0xF_4000) to WP,
the cache setting for [0xF_4000, 0xF_8000) is reset to UC.
The reason is when MtrrLibSetBelow1MBMemoryAttribute() is called the
WorkingFixedSettings doesn't contain the actual MSR value stored in
hardware, but when writing the fixed MTRRs, the code logic assumes
WorkingFixedSettings contains the actual MSR value.
The new fix is to change MtrrLibSetBelow1MBMemoryAttribute() to
calculate the correct ClearMasks[] and OrMasks[], and use them
directly when writing the fixed MTRRs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
In AcquireSpinLock function, it may call GetPerformanceCounter which
final calls PeiService table. This code may also been used by AP but
AP should not calls PeiService. This patch update code to avoid use
AcquireSpinLock function.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V3:
Define union to specify the ppi or protocol.
V2:
1. Initialize CpuFeaturesData->MpService in CpuInitDataInitialize
and make this function been called at the begin of the
initialization.
2. let all other functions use CpuFeaturesData->MpService install
of locate the protocol itself.
V1:
GetProcessorIndex function calls GetMpPpi to get the MP Ppi.
Ap will calls GetProcessorIndex function which final let AP calls
PeiService.
This patch avoid GetProcessorIndex call PeiService.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Enhance debug message format to let them easy to read.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Previously, when compiling NASM source files, BaseTools did not support
including files outside of the NASM source file directory. As a result, we
duplicated multiple copies of "StuffRsb.inc" files in UefiCpuPkg. Those
INC files contain the common logic to stuff the Return Stack Buffer and
are identical.
After the fix of BZ 1085:
https://bugzilla.tianocore.org/show_bug.cgi?id=1085
The above support was introduced.
Thus, this commit will merge all the StuffRsb.inc files in UefiCpuPkg into
one file. The merged file will be named 'StuffRsbNasm.inc' and be placed
under folder UefiCpuPkg/Include/.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
*Excpetion* should be *Exception*
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
CC: Eric Dong <eric.dong@intel.com>
CC: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
The patch reverts commit 1ed6498c4a
* UefiCpuPkg/CommonFeature: Skip locking when the feature is disabled
FEATURE_CONTROL.Lock bit is controlled by feature
CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER. The commit 1ed649 fixes
a bug that when the feature is disabled, the Lock bit is cleared.
But it's a security hole if the bit is cleared when booting OS.
We can argue that platform needs to make sure the value
of PcdCpuFeaturesUserConfiguration should be set properly to make
sure feature CPU_FEATURE_LOCK_FEATURE_CONTROL_REGISTER is enabled.
But it's better to guarantee this in the generic core code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
In current implementation, core and package level sync uses same semaphores.
Sharing the semaphore may cause wrong execution order.
For example:
1. Feature A has CPU_FEATURE_CORE_BEFORE dependency with Feature B.
2. Feature C has CPU_FEATURE_PACKAGE_AFTER dependency with Feature B.
The expected feature initialization order is A B C:
A ---- (Core Depends) ----> B ---- (Package Depends) ----> C
For a CPU has 1 package, 2 cores and 4 threads. The feature initialization
order may like below:
Thread#1 Thread#2 Thread#3 Thread#4
[A.Init] [A.Init] [A.Init]
Release(S1, S2) Release(S1, S2) Release(S3, S4)
Wait(S1) * 2 Wait(S2) * 2 <------------------------------- Core sync
[B.Init] [B.Init]
Release (S1,S2,S3,S4)
Wait (S1) * 4 <----------------------------------------------------- Package sync
Wait(S4 * 2) <- Core sync
[B.Init]
In above case, for thread#4, when it syncs in core level, Wait(S4) * 2 isn't
blocked and [B.Init] runs. But [A.Init] hasn't run in thread#3. It's wrong!
Thread#4 should execute [B.Init] after thread#3 executes [A.Init] because B
core level depends on A.
The reason of the wrong execution order is that S4 is released in thread#1
by calling Release (S1, S2, S3, S4) and in thread #4 by calling
Release (S3, S4).
To fix this issue, core level sync and package level sync should use separate
semaphores.
In above example, the S4 released in Release (S1, S2, S3, S4) should not be the
same semaphore as that in Release (S3, S4).
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
V2 changes:
V1 change has regression which caused by change feature order.
V2 changes logic to detect dependence not only for the
neighborhood features. It need to check all features in the list.
V1 Changes:
In current code logic, only adjust feature position if current
CPU feature position not follow the request order. Just like
Feature A need to be executed before feature B, but current
feature A registers after feature B. So code will adjust the
position for feature A, move it to just before feature B. If
the position already met the requirement, code will not adjust
the position.
This logic has issue when met all below cases:
1. feature A has core or package level dependence with feature B.
2. feature A is register before feature B.
3. Also exist other features exist between feature A and B.
Root cause is driver ignores the dependence for this case, so
threads may execute not follow the dependence order.
Fix this issue by change code logic to adjust feature position
for CPU features which has dependence relationship.
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1311
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1305
Today's code unconditionally sets the IA32_FEATURE_CONTROL.Lock to 1
no matter the feature is enabled or not.
The patch fixes this issue by only setting the Lock bit to 1 when
the feature is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
In some special cases, after BSP sends Init-sipi-sipi signal
AP needs more time to start the Ap procedure. In this case
BSP may think AP has finished its task but in fact AP hasn't began
yet.
Rollback former change to keep the status which only be used
when AP really finished task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Build UefiCpuPkg with below configuration:
Architecture(s) = IA32
Build target = NOOPT
Toolchain = VS2015x86
Below error info shows up:
DxeRegisterCpuFeaturesLib.lib(CpuFeaturesInitialize.obj) :
error LNK2001: unresolved external symbol __allmul
Valid mDependTypeStr type only have 5 items, use UINT32 type cast
to fix this error.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Index is initialized to MAX_UINT16 as default failure value, which
is what the ASSERT is supposed to test for. The ASSERT condition
however can never return FALSE for INT16 != int, as due to
Integer Promotion[1], Index is converted to int, which can never
result in -1.
Furthermore, Index is used as a for loop index variable inbetween its
initialization and the ASSERT, so the value is unconditionally
overwritten too.
Fix the ASSERT check to compare Index to its upper boundary, which it
will be equal to if the loop was not broken out of on success.
[1] ISO/IEC 9899:2011, 6.5.9.4
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current code assume only one dependence (before or after) for one
feature. Enhance code logic to support feature has two dependence
(before and after) type.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Changes include:
1. Remove extra white space at the end of line.
2. Add comments for the new add function parameter.
3. Update IN OUT tag for function parameter.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Remove extra white space at the end of line.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Code initialized in function can't be correctly detected by build tool.
Add code to clearly initialize the local variable before use it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Because MSR has scope attribute, driver has no needs to set
MSR for all APs if MSR scope is core or package type. This patch
updates code to base on the MSR scope value to add MSR to the register
table.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V4 changes include:
1. Serial debug message for different threads when program the register table.
V3 changes include:
1. Use global variable instead of internal function to return string for register type
and dependence type.
2. Add comments for some complicated logic.
V2 changes include:
1. Add more description for the code part which need easy to understand.
2. Refine some code base on feedback for V1 changes.
V1 changes include:
In a system which has multiple cores, current set register value task costs huge times.
After investigation, current set MSR task costs most of the times. Current logic uses
SpinLock to let set MSR task as an single thread task for all cores. Because MSR has
scope attribute which may cause GP fault if multiple APs set MSR at the same time,
current logic use an easiest solution (use SpinLock) to avoid this issue, but it will
cost huge times.
In order to fix this performance issue, new solution will set MSRs base on their scope
attribute. After this, the SpinLock will not needed. Without SpinLock, new issue raised
which is caused by MSR dependence. For example, MSR A depends on MSR B which means MSR A
must been set after MSR B has been set. Also MSR B is package scope level and MSR A is
thread scope level. If system has multiple threads, Thread 1 needs to set the thread level
MSRs and thread 2 needs to set thread and package level MSRs. Set MSRs task for thread 1
and thread 2 like below:
Thread 1 Thread 2
MSR B N Y
MSR A Y Y
If driver don't control execute MSR order, for thread 1, it will execute MSR A first, but
at this time, MSR B not been executed yet by thread 2. system may trig exception at this
time.
In order to fix the above issue, driver introduces semaphore logic to control the MSR
execute sequence. For the above case, a semaphore will be add between MSR A and B for
all threads. Semaphore has scope info for it. The possible scope value is core or package.
For each thread, when it meets a semaphore during it set registers, it will 1) release
semaphore (+1) for each threads in this core or package(based on the scope info for this
semaphore) 2) acquire semaphore (-1) for all the threads in this core or package(based
on the scope info for this semaphore). With these two steps, driver can control MSR
sequence. Sample code logic like below:
//
// First increase semaphore count by 1 for processors in this package.
//
for (ProcessorIndex = 0; ProcessorIndex < PackageThreadsCount ; ProcessorIndex ++) {
LibReleaseSemaphore ((UINT32 *) &SemaphorePtr[PackageOffset + ProcessorIndex]);
}
//
// Second, check whether the count has reach the check number.
//
for (ProcessorIndex = 0; ProcessorIndex < ValidApCount; ProcessorIndex ++) {
LibWaitForSemaphore (&SemaphorePtr[ApOffset]);
}
Platform Requirement:
1. This change requires register MSR setting base on MSR scope info. If still register MSR
for all threads, exception may raised.
Known limitation:
1. Current CpuFeatures driver supports DXE instance and PEI instance. But semaphore logic
requires Aps execute in async mode which is not supported by PEI driver. So CpuFeature
PEI instance not works after this change. We plan to support async mode for PEI in phase
2 for this task.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1237
Sometimes the memory will be contaminated by random data left in last
boot (warm reset). The code should not assume the allocated memory is
always filled with zero. This patch add code to clear data structure
used for stack switch to prevent such problem from happening.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The PCD below is unused, so it has been removed from inf.
gUefiCpuPkgTokenSpaceGuid.PcdCpuFeaturesSupport
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1187
The patch reverts 9c8c4478cf
"UefiCpuPkg/MtrrLib: Skip Base MSR access when the pair is invalid".
Microsoft Windows will report an error in event manager if MTRR
usage is different across hibernate even when the difference is
in an non valid MTRR pair. This seems like a bug in Windows but
for compatibility and servicing reasons we think a change in UEFI
would wise.
A Windows change has already been submitted for the next iteration
(2019 time frame).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
The conflict issues are introduced by Stack Guard feature enabled for
PEI.
The first is CR0 which should be restored after CR3 and CR4.
Another is TR which should not be passed from BSP to AP during init
phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Stack Guard needs to setup stack switch capability to allow exception
handler to be called with good stack if stack overflow is detected.
This patch update InitializeCpuExceptionHandlersEx() to allow pass
extra initialization data used to setup exception stack switch for
specified exceptions.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: "Ware, Ryan R" <ryan.r.ware@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Fix trailing white spaces and invalid line ending issue.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
When an exception happens in AP, system hangs at
GetPeiServicesTablePointer(), complaining the PeiServices retrieved
from memory before IDT is NULL.
Due to the following commit:
c563077a38
* UefiCpuPkg/MpInitLib: Avoid calling PEI services from AP
the IDT used by AP no longer preserve PeiServices pointer in the
very beginning.
But the implementation of PeiExceptionHandlerLib still assumes
the PeiServices pointer is there, so the assertion happens.
The patch fixes the exception handler library to not call
PEI services from AP.
The patch duplicates the #0 exception stub header in an allocated
pool but with extra 4-byte/8-byte to store the exception handler
data which was originally stored in HOB.
When AP exception happens, the code gets the exception handler data
from the exception handler for #0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Fan Jeff <vanjeff_919@hotmail.com>
Today's implementation of handling HOOK_BEFORE and HOOK_AFTER is
a bit complex. More comments is better.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Once the #PF handler has set the page to be 'present', there should
be a way to reset it to 'not-present'. 'TF' bit in EFLAGS can be used
for this purpose. 'TF' bit will be set in interrupted function context
so that it can be triggered once the cpu control returns back to the
instruction causing #PF and re-execute it.
This is an necessary step to implement non-stop mode for Heap Guard
and NULL Pointer Detection feature.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1093
Return Stack Buffer (RSB) is used to predict the target of RET
instructions. When the RSB underflows, some processors may fall back to
using branch predictors. This might impact software using the retpoline
mitigation strategy on those processors.
This commit will add RSB stuffing logic before returning from SMM (the RSM
instruction) to avoid interfering with non-SMM usage of the retpoline
technique.
After the stuffing, RSB entries will contain a trap like:
@SpecTrap:
pause
lfence
jmp @SpecTrap
A more detailed explanation of the purpose of commit is under the
'Branch target injection mitigation' section of the below link:
https://software.intel.com/security-software-guidance/insights/host-firmware-speculative-execution-side-channel-mitigation
Please note that this commit requires further actions (BZ 1091) to remove
the duplicated 'StuffRsb.inc' files and merge them into one under a
UefiCpuPkg package-level directory (such as UefiCpuPkg/Include/).
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
V1 changes:
> Current code logic can't confirm CpuS3DataDxe driver start before
> CpuFeaturesDxe driver. So the assumption in CpuFeaturesDxe not valid.
> Add implementation for AllocateAcpiCpuData function to remove this
> assumption.
V2 changes:
> Because CpuS3Data memory will be copy to smram at SmmReadToLock point,
> so the memory type no need to be ACPI NVS type, also the address not
> limit to below 4G.
> This change remove the limit of ACPI NVS memory type and below 4G.
V3 changes:
> Remove function definition in header file.
> Add STATIC in function implementation.
Pass OS boot and resume from S3 test.
Bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=959
Reported-by: Marvin Häuser <Marvin.Haeuser@outlook.com>
Suggested-by: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Cc: Fan Jeff <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Merge [Sources.Ia32, Sources.X64] to [Sources] after removing IPF. Also
change other similar parts in this file.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Base on UEFI spec requirement, StartAllAPs function should not use the APs which has been disabled before. This patch just change current code to follow this rule.
V3 changes:
Only called by StartUpAllAps, WakeUpAp will not wake up the disabled APs, in other cases also need to include the disabled APs, such as CpuDxe driver start up and ChangeApLoopCallback function.
WakeUpAP() is called with (Broadcast && WakeUpDisabledAps) from MpInitLibInitialize(), CollectProcessorCount() and MpInitChangeApLoopCallback() only. The first two run before the PPI or Protocol user has a chance to disable any APs. The last one runs in response to the ExitBootServices and LegacyBoot events, after which the MP protocol is unusable. For this reason, it doesn't matter that an originally disabled AP's state is not restored to Disabled, when
WakeUpAP() is called with (Broadcast && WakeUpDisabledAps).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The patch includes below changes:
(1) It removes "volatile" from RunningCount, because only the BSP modifies it.
(2) When we detect a timeout in CheckAllAPs(), and collect the list of failed CPUs, the size of the list is derived from the following difference, before the patch:
StartCount - FinishedCount
where "StartCount" is set by the BSP at startup, and FinishedCount is incremented by the APs themselves.
Here the patch replaces this difference with
StartCount - RunningCount
that is, the difference is no more calculated from the BSP's startup counter and the AP's shared finish counter, but from the RunningCount measurement that the BSP does itself, in CheckAllAPs().
(3) Finally, the patch changes the meaning of RunningCount. Before the patch, we have:
- StartCount: the number of APs the BSP stars up,
- RunningCount: the number of finished APs that the BSP collected
After the patch, StartCount is removed, and RunningCount is *redefined* as the following difference:
OLD_StartCount - OLD_RunningCount
Giving the number of APs that the BSP started up but hasn't collected yet.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current CPU state definition include CpuStateIdle and CpuStateFinished.
After investigation, current code can use CpuStateIdle to replace the
CpuStateFinished. It will reduce the state number and easy for maintenance.
> Before this patch, the state transitions for an AP are:
>
> Idle ----> Ready ----> Busy ----> Finished ----> Idle
> [BSP] [AP] [AP] [BSP]
>
> After the patch, the state transitions for an AP are:
>
> Idle ----> Ready ----> Busy ----> Idle
> [BSP] [AP] [AP]
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Current function has low performance because it calls GetApicId
in the loop, so it maybe called more than once.
New logic call GetApicId once and base on this value to search
the processor.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When resume from S3 and CPU loop mode is MWait mode,
if driver calls APs to do task at EndOfPei point, the
APs can't been wake up and bios hang at that point.
The root cause is PiSmmCpuDxeSmm driver wakes up APs
with HLT mode during S3 resume phase to do SMM relocation.
After this task, PiSmmCpuDxeSmm driver not restore APs
context which make CpuMpPei driver saved wake up buffer
not works.
The solution for this issue is let CpuMpPei driver hook
S3SmmInitDone ppi notification. In this notify function,
it check whether Cpu Loop mode is not HLT mode. If yes,
CpuMpPei driver will set a flag to force BSP use INIT-SIPI
-SIPI command to wake up the APs.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The SDM requires only one thread per core to load the
microcode.
This change enables this solution.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Search uCode costs much time, if AP has same processor type
with BSP, AP can use BSP saved uCode info to get better performance.
This change enables this solution.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Read uCode from memory has better performance than from flash.
But it needs extra effort to let BSP copy uCode from flash to
memory. Also BSP already enable cache in SEC phase, so it use
less time to relocate uCode from flash to memory. After
verification, if system has more than one processor, it will
reduce some time if load uCode from memory.
This change enable this optimization.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Today's MpInitLib PEI implementation directly calls
PeiServices->GetHobList() from AP which may cause racing issue.
This patch fixes this issue by duplicating IDT for APs.
Because CpuMpData structure is stored just after IDT, the CpuMPData
address equals to IDTR.BASE + IDTR.LIMIT + 1.
v2:
1. Add ALIGN_VALUE() on BufferSize.
2. Add ASSERT() to make sure no memory usage outside of the allocated buffer.
3. Add more comments in InitConfig path when restoring CpuData[0].VolatileRegisters.
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Fish Andrew <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
On AMD processors the second SendIpi in the SendInitSipiSipi and
SendInitSipiSipiAllExcludingSelf routines is not required, and may cause
undesired side-effects during MP initialization.
This patch leverages the StandardSignatureIsAuthenticAMD check to exclude
the second SendIpi and its associated MicroSecondDelay (200).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules expect for the ones in ResetVector directory.
The ones in ResetVector directory are included by Vtf0.nasmb. They are
also nasm style.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
According to IA manual:
"Before setting this bit (MSR_IA32_MISC_ENABLE[22]) , BIOS must
execute the CPUID.0H and examine the maximum value returned in
EAX[7:0]. If the maximum value is greater than 2, this bit is
supported."
We need to fix our current detection logic to compare against 2.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Ming Shao <ming.shao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Within function ApWakeupFunction():
When source level debugger is enabled, AP interrupts will be enabled by
EnableDebugAgent(). Then the AP function will be executed by:
Procedure (Parameter);
After the AP function returns, AP interrupts will be disabled when the
APs are placed in loop mode (both HltLoop and MwaiLoop).
However, at ExitBootServices, ApWakeupFunction() is called with
'Procedure' equals to RelocateApLoop().
(ExitBootServices callback registered within InitMpGlobalData())
RelocateApLoop() never returns, so it has to disable the AP interrupts by
itself. However, we find that interrupts are only disabled for the
HltLoop case, but not for the MwaitLoop case (within file MpFuncs.nasm).
This commit adds the missing disabling of AP interrupts for MwaitLoop.
Also, for X64, this commit will disable the interrupts before switching to
32-bit mode.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
FixedPcdGetSize() is used as the macro value, PcdGetSize() is used as global
variable or function. Here usage is to access macro value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
if PcdDxeNxMemoryProtectionPolicy is enabled for EfiReservedMemoryType
of memory, #PF will be triggered for each APs after ExitBootServices
in SCRT test. The root cause is that AP wakeup code executed at that
time is stored in memory of type EfiReservedMemoryType (referenced by
global mReservedApLoopFunc), which is marked as non-executable.
This patch fixes this issue by setting memory of mReservedApLoopFunc to
be executable immediately after allocation.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Boolean values do not need to use explicit comparisons
to TRUE or FALSE.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is introduced at following commit, which tried to add stack
switch support on behalf of Stack Guard feature.
0ff5aa9cae
The field KnownGoodStackTop in CPU_EXCEPTION_INIT_DATA is initialized to
the start address of array mNewStack. This is wrong. It must be the end
of mNewStack. This patch fixes this mistake.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's McaInitialize() doesn't check State value before initialize
MCi_CTL and MCi_STATUS.
The patch fixes this issue by only initializing the two kinds of
MSRs when State is enabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Today's implementation only assumes SandyBridge CPU supports
Extended On-Demand Clock Modulation Duty Cycle.
Actually it is supported when CPUID.06h.EAX[5] == 1.
When platform requests 50% throttling, it causes value 1000b
set to the low-4 bits of IA32_CLOCK_MODULATION.
But the wrong code sets 1000b to bits[1-3] which causes assertion.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The reason doing this is that we found that calling StartupAllAps() to
flush TLB for all APs in CpuDxe driver after changing page attributes
will spend a lot of time to complete. If there are many page attributes
update requests, the whole system performance will be slowed down
explicitly, including any shell command and UI operation.
The solution is removing the flush operation for AP in CpuDxe driver.
Since TLB is always flushed in HLT loop mode, we just need to enforce
a TLB flush for mwait loop mode.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This issue is introduced by a patch at
f32bfe6d06
The above patch miss the case of 64-bit PEI, which will link
X64/MpFuncs.nasm instead of Ia32/MpFuncs.nasm. For X64/MpFuncs.nasm,
ExchangeInfo->ModeHighMemory should be always initialized no matter
if separate wakeup buffer is allocated or not. Ia32/MpFuncs.nasm will
not need ModeHighMemory during AP init. So the changes made in this
patch should not affect the functionality of it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Every processor's StartupApSignal is initialized in
MpInitLibInitialize() before calling CollectProcessorCount().
When SortApicId() is called from CollectProcessorCount(), AP Index
is re-assigned by APIC ID. But SortApicId() forgets to set the
correct StartupApSignal when sorting the AP.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
To fix an issue in which enabling NX feature will mark the AP wakeup
buffer as non-executable and fail the AP init, the buffer was split
into two part: the lower part in memory within 1MB and the higher part
within allocated executable memory (EfiBootServicesCode). But the
address of higher part memory was stored in lower part memory, which
is actually shared with legacy components and will be overwritten by
LegacyBiosDxe driver if CSM is enabled.
This patch fixes this issue by storing the address of higher part
memory in CpuMpData instead of ExchangeInfo.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
MtrrSetMemoryAttributesInMtrrSettings() is a batch-set API.
When setting multiple ranges of memory attributes, the single-set
API (MtrrSetMemoryAttributeInMtrrSettings and MtrrSetMemoryAttribute)
may fail, but batch-set API may succeed.
Add comments to recommend caller to use batch-set API when setting
multiple ranges.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ming Shao <ming.shao@intel.com>
GetWakeupBuffer() tries to find a below-1M free memory, it checks
whether the memory is allocated already in
CheckOverlapWithAllocatedBuffer(). When there is a memory allocation
hob (base = 0xff_00000000, size = 0x10000000),
CheckOverlapWithAllocateBuffer() truncates the base to 0 which causes
it always returns TRUE so GetWakeupBuffer() fails to find a below-1MB
memory.
The patch fixes this issue by using UINT64 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesData, EfiConventionalMemory, the BIOS will reset after
timer initialized and started.
The root cause is that the memory used to hold the exception and interrupt
handler is allocated with type of EfiBootServicesData and marked as
non-executable due to NX feature enabled. This patch fixes it by allocating
EfiBootServicesCode type of memory for those handlers instead.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory, the BIOS will hang at a page
fault exception during MP initialization.
The root cause is that the AP wake up buffer, which is below 1MB and used
to hold both AP init code and data, is type of EfiConventionalMemory (not
really allocated because of potential conflict with legacy code), and is
marked as non-executable. During the transition from real address mode
to long mode, the AP init code has to enable paging which will then cause
itself a page fault exception because it's just running in non-executable
memory.
The solution is splitting AP wake up buffer into two part: lower part is
still below 1MB and shared with legacy system, higher part is really
allocated memory of BootServicesCode type. The init code in the memory
below 1MB will not enable paging but just switch to protected mode and
jump to higher memory, in which the init code will enable paging and
switch to long mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Commits a2ea6894e6
* UefiCpuPkg/MpInitLib: Fix a bug that AP enters timer INT handler
masked the interrupts in AP.
But it didn't unmask the interrupt in new BSP when Switch BSP
happens.
The patch fixed this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=849
In V2, use "mov rax, strict qword 0" to replace the hard code db.
1. Use lea instruction to get the address instead of mov instruction.
2. Use the dummy address as jmp destination, and add the logic to fix up
the address to the absolute address at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=849
In V2, use mov rax, strict qword 0 to replace the hard code db.
Use the dummy address as jmp destination, and add the logic to fix up
the address to the absolute address at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Enhance MCA feature dependency check base on SDM pseudocode example 15-1.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
0 40 f0 100
+---WT--+--UC--+--WT--+-----WB----+----UC----+
When calculating the shortest path from 0 to 100, the
MtrrLibCalculateLeastMtrrs() is called to update the
Vertices.Previous.
When calculating the shortest path from 0 to 40,
MtrrLibCalculateLeastMtrrs() is called recursively to update the
Vertices.Previous.
The second call corrupt the Previous value that will be used
later.
The patch removes the code that corrupts Previous.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
80 A8 B0 B8 C0
+----------WB--------+-UC-+-WT-+-WB-+
For above memory settings, current code caused the final MTRR
settings miss [A8, B0, UC] when default memory type is UC.
The root cause is the code only checks the mandatory weight
between A8 to B0, but skips to check the optional weight.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The patch only change the comments and variable name so
doesn't impact the functionality.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
*SetMemoryAttribute*() API cannot handle the setting request that
looks like <0, MAX_ADDRESS, Type>. The buggy parameter checking
logic returns Unsupported for this case.
The patch fixes the checking logic to handle such case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Code forgot to initialize the optional weight between adjacent
vertices. It caused wrong MTRR result was calculated for some
memory settings.
The logic was incorrectly removed when converting from POC
code. The patch adds back the initialization.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MtrrSetMemoryAttributesInMtrrSettings() missed the debug messages
of memory attribute request and status. The patch moves all debug
messages from MtrrSetMemoryAttributeInMtrrSettings() to
MtrrSetMemoryAttributesInMtrrSettings() and refines the debug message
to carry more information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The reason is that DXE part initialization will reuse the stack allocated
at PEI phase, if MP was initialized before. Some code added to check this
situation and use stack base address saved in HOB passed from PEI.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Star Zeng
Joe Richey
Michael D Kinney
Ray Ni
Eric Dong
Shenglei Zhang
Chen A Chen
Jian J Wang
Jiewen Yao
Ruiyu Ni
Hao Wu
Mike Maslenkin
Marvin H?user
Liming Gao
Dandan Bi
Song, BinX