[auth.h]
allow GSSAPI authentication to detect when a server-side failure causes
authentication failure and don't count such failures against MaxAuthTries;
bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
- djm@cvs.openbsd.org 2011/03/10 02:52:57
[auth2-gss.c auth2.c]
allow GSSAPI authentication to detect when a server-side failure causes
authentication failure and don't count such failures against MaxAuthTries;
bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
Cygwin-specific service installer script ssh-host-config. The actual
functionality is the same, the revisited version is just more
exact when it comes to check for problems which disallow to run
certain aspects of the script. So, part of this script and the also
rearranged service helper script library "csih" is to check if all
the tools required to run the script are available on the system.
The new script also is more thorough to inform the user why the
script failed. Patch from vinschen at redhat com.
- (tim) [configure.ac] Consistent M4 quoting throughout, updated obsolete
AC_TRY_COMPILE with AC_COMPILE_IFELSE, updated obsolete AC_TRY_LINK with
AC_LINK_IFELSE, updated obsolete AC_TRY_RUN with AC_RUN_IFELSE, misc white
space changes for consistency/readability. Makes autoconf 2.68 happy.
"Nice work" djm
openbsd-compat/port-linux.h] Move SELinux-specific code from ssh.c to
port-linux.c to avoid compilation errors. Add -lselinux to ssh when
building with SELinux support to avoid linking failure; report from
amk AT spamfence.net; ok dtucker
RSA_get_default_method() for the benefit of openssl versions that don't
have it (at least openssl-engine-0.9.6b). Found and tested by Kevin Brott,
ok djm@.
[regress/sftp-glob.sh regress/test-exec.sh] Rework how feature tests are
disabled on platforms that do not support them; add a "config_defined()"
shell function that greps for defines in config.h and use them to decide
on feature tests.
Convert a couple of existing grep's over config.h to use the new function
Add a define "FILESYSTEM_NO_BACKSLASH" for filesystem that can't represent
backslash characters in filenames, enable it for Cygwin and use it to turn
of tests for quotes backslashes in sftp-glob.sh.
based on discussion with vinschen AT redhat.com and dtucker@; ok dtucker@
[clientloop.c]
a couple more tweaks to the post-close protocol 1 stderr/stdout flush:
now that we use atomicio(), convert them from while loops to if statements
add test and cast to compile cleanly with -Wsigned
[clientloop.c]
Use atomicio when flushing protocol 1 std{out,err} buffers at
session close. This was a latent bug exposed by setting a SIGCHLD
handler and spotted by kevin.brott AT gmail.com; ok dtucker@
host-key-force target rather than a substitution that is replaced with a
comment so that the Makefile.in is still a syntactically valid Makefile
(useful to run the distprep target)
avoid some integer overflows mostly with GLOB_APPEND and GLOB_DOOFFS
and sanity check arguments (these will be unnecessary when we switch
struct glob members from being type into to size_t in the future);
"looks ok" tedu@ feedback guenther@
[openbsd-compat/glob.c]
Extend GLOB_LIMIT to cover readdir and stat and bump the malloc limit
from ARG_MAX to 64K.
Fixes glob-using programs (notably ftp) able to be triggered to hit
resource limits.
Idea from a similar NetBSD change, original problem reported by jasper@.
ok millert tedu jasper
[clientloop.c ssh-keygen.c sshd.c]
some unsigned long long casts that make things a bit easier for
portable without resorting to dropping PRIu64 formats everywhere
[readpass.c]
fix ControlMaster=ask regression
reset SIGCHLD handler before fork (and restore it after) so we don't miss
the the askpass child's exit status. Correct test for exit status/signal to
account for waitpid() failure; with claudio@ ok claudio@ markus@
[scp.1 scp.c]
add a new -3 option to scp: Copies between two remote hosts are
transferred through the local host. Without this option the data
is copied directly between the two remote hosts. ok djm@ (bugzilla #1837)
formatter if it is present, followed by nroff and groff respectively.
Fixes distprep target on OpenBSD (which has bumped groff/nroff to ports
in favour of mandoc). feedback and ok tim
[sftp-server.c sftp.1 sftp-client.h sftp.c PROTOCOL sftp-client.c]
add a protocol extension to support a hard link operation. It is
available through the "ln" command in the client. The old "ln"
behaviour of creating a symlink is available using its "-s" option
or through the preexisting "symlink" command; based on a patch from
miklos AT szeredi.hu in bz#1555; ok markus@
- djm@cvs.openbsd.org 2010/12/03 23:49:26
[schnorr.c]
check that g^x^q === 1 mod p; recommended by JPAKE author Feng Hao
(this code is still disabled, but apprently people are treating it as
a reference implementation)
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
[scp.c]
Pass through ssh command-line flags and options when doing remote-remote
transfers, e.g. to enable agent forwarding which is particularly useful
in this case; bz#1837 ok dtucker@
[channels.c]
remove a debug() that pollutes stderr on client connecting to a server
in debug mode (channel_close_fds is called transitively from the session
code post-fork); bz#1719, ok dtucker
[clientloop.c]
avoid NULL deref on receiving a channel request on an unknown or invalid
channel; report bz#1842 from jchadima AT redhat.com; ok dtucker@
[authfile.c]
Refactor internals of private key loading and saving to work on memory
buffers rather than directly on files. This will make a few things
easier to do in the future; ok markus@
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c moduli.c]
use only libcrypto APIs that are retained with OPENSSL_NO_DEPRECATED.
these have been around for years by this time. ok markus
openbsd-compat/port-solaris.{c,h}] Bug #1824: Add Solaris Project support.
Patch from cory.erickson at csu mnscu edu with a bit of rework from me.
ok djm@
[authfile.c key.c key.h ssh-keygen.c]
fix a possible NULL deref on loading a corrupt ECDH key
store ECDH group information in private keys files as "named groups"
rather than as a set of explicit group parameters (by setting
the OPENSSL_EC_NAMED_CURVE flag). This makes for shorter key files and
retrieves the group's OpenSSL NID that we need for various things.
[cipher-3des1.c cipher-bf1.c cipher-ctr.c openbsd-compat/openssl-compat.h]
adapt to API changes in openssl-1.0.0a
NB. contains compat code to select correct API for older OpenSSL
[sftp.c configure.ac openbsd-compat/glob.c openbsd-compat/glob.h]
make use of new glob(3) GLOB_KEEPSTAT extension to save extra server
rountrips to fetch per-file stat(2) information.
NB. update openbsd-compat/ glob(3) implementation from OpenBSD libc to
match.
[misc.c misc.h configure.ac openbsd-compat/openbsd-compat.h]
[openbsd-compat/timingsafe_bcmp.c]
Add timingsafe_bcmp(3) to libc, mention that it's already in the
kernel in kern(9), and remove it from OpenSSH.
ok deraadt@, djm@
NB. re-added under openbsd-compat/ for portable OpenSSH
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
[mux.c]
"atomically" create the listening mux socket by binding it on a temorary
name and then linking it into position after listen() has succeeded.
this allows the mux clients to determine that the server socket is
either ready or stale without races. stale server sockets are now
automatically removed
ok deraadt
[jpake.c schnorr.c]
check that received values are smaller than the group size in the
disabled and unfinished J-PAKE code.
avoids catastrophic security failure found by Sebastien Martini
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
[kex.c kex.h kexecdh.c key.c key.h monitor.c ssh-ecdsa.c]
ECDH/ECDSA compliance fix: these methods vary the hash function they use
(SHA256/384/512) depending on the length of the curve in use. The previous
code incorrectly used SHA256 in all cases.
This fix will cause authentication failure when using 384 or 521-bit curve
keys if one peer hasn't been upgraded and the other has. (256-bit curve
keys work ok). In particular you may need to specify HostkeyAlgorithms
when connecting to a server that has not been upgraded from an upgraded
client.
ok naddy@
[compress.c]
work around name-space collisions some buggy compilers (looking at you
gcc, at least in earlier versions, but this does not forgive your current
transgressions) seen between zlib and openssl
ok djm
[ssh-keygen.c]
Switch ECDSA default key size to 256 bits, which according to RFC5656
should still be better than our current RSA-2048 default.
ok djm@, markus@
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
reintroduce commit from tedu@, which I pulled out for release
engineering:
OpenSSL_add_all_algorithms is the name of the function we have a
man page for, so use that. ok djm
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[auth-options.c auth1.c auth2.c bufaux.c buffer.h kex.c key.c packet.c]
[packet.h ssh-dss.c ssh-rsa.c]
Add buffer_get_cstring() and related functions that verify that the
string extracted from the buffer contains no embedded \0 characters*
This prevents random (possibly malicious) crap from being appended to
strings where it would not be noticed if the string is used with
a string(3) function.
Use the new API in a few sensitive places.
* actually, we allow a single one at the end of the string for now because
we don't know how many deployed implementations get this wrong, but don't
count on this to remain indefinitely.
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
OpenSSL_add_all_algorithms is the name of the function we have a man page
for, so use that. ok djm
[ssh.c]
close any extra file descriptors inherited from parent at start and
reopen stdin/stdout to /dev/null when forking for ControlPersist.
prevents tools that fork and run a captive ssh for communication from
failing to exit when the ssh completes while they wait for these fds to
close. The inherited fds may persist arbitrarily long if a background
mux master has been started by ControlPersist. cvs and scp were effected
by this.
"please commit" markus@
openbsd-compat/openbsd-compat.h openbsd-compat/strptime.c] Add strptime to
the compat library which helps on platforms like old IRIX. Based on work
by djm, tested by Tom Christensen.
regress/test-exec.sh] Under certain conditions when testing with sudo
tests would fail because the pidfile could not be read by a regular user.
"cat: cannot open ...../regress/pidfile: Permission denied (error 13)"
Make sure cat is run by $SUDO. no objection from me. djm@
[channels.c]
Fix a trio of bugs in the local/remote window calculation for datagram
data channels (i.e. TunnelForward):
Calculate local_consumed correctly in channel_handle_wfd() by measuring
the delta to buffer_len(c->output) from when we start to when we finish.
The proximal problem here is that the output_filter we use in portable
modified the length of the dequeued datagram (to futz with the headers
for !OpenBSD).
In channel_output_poll(), don't enqueue datagrams that won't fit in the
peer's advertised packet size (highly unlikely to ever occur) or which
won't fit in the peer's remaining window (more likely).
In channel_input_data(), account for the 4-byte string header in
datagram packets that we accept from the peer and enqueue in c->output.
report, analysis and testing 2/3 cases from wierbows AT us.ibm.com;
"looks good" markus@
[authfile.c]
commited the wrong version of the hostbased certificate diff; this
version replaces some strlc{py,at} verbosity with xasprintf() at
the request of markus@
[PROTOCOL.certkeys ssh-keygen.c]
tighten the rules for certificate encoding by requiring that options
appear in lexical order and make our ssh-keygen comply. ok markus@
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
[sftp-client.c]
bz#1797: fix swapped args in upload_dir_internal(), breaking recursive
upload depth checks and causing verbose printing of transfers to always
be turned on; patch from imorgan AT nas.nasa.gov
[ssh-rsa.c]
more timing paranoia - compare all parts of the expected decrypted
data before returning. AFAIK not exploitable in the SSH protocol.
"groovy" deraadt@
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
[misc.c]
unbreak strdelim() skipping past quoted strings, e.g.
AllowUsers "blah blah" blah
was broken; report and fix in bz#1757 from bitman.zhou AT centrify.com
ok dtucker;
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
[channels.c session.c]
bz#1750: fix requirement for /dev/null inside ChrootDirectory for
internal-sftp accidentally introduced in r1.253 by removing the code
that opens and dup /dev/null to stderr and modifying the channels code
to read stderr but discard it instead; ok markus@
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
[ssh-keyscan.c]
replace verbose and overflow-prone Linebuf code with read_keyfile_line()
based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
[auth.c]
queue auth debug messages for bad ownership or permissions on the user's
keyfiles. These messages will be sent after the user has successfully
authenticated (where our client will display them with LogLevel=debug).
[servconf.c sshd_config.5]
expose some more sshd_config options inside Match blocks:
AuthorizedKeysFile AuthorizedPrincipalsFile
HostbasedUsesNameFromPacketOnly PermitTunnel
bz#1764; feedback from imorgan AT nas.nasa.gov; ok dtucker@
Damien Miller
Darren Tucker
Tim Rice