Cache maintenance operations by set/way are only intended to be used
in the context of on/offlining a core, while it has been taken out of
the coherency domain. Any use intended to ensure that the contents of
the cache have made it to main memory is unreliable, since cacheline
migration and non-architected system caches may cause these contents
to linger elsewhere, without being visible in main memory once the
MMU and caches are disabled.
In KVM on Linux, there are horrid hacks in place to ensure that such
set/way operations are trapped, and replaced with a single by-VA
clean/invalidate of the entire guest VA space once the MMU state
changes, which can be costly, and is unnecessary if we manage the
caches a bit more carefully, and perform maintenance by virtual
address only.
So let's get rid of the call to ArmInvalidateDataCache () in the
PrePeiCore startup code, and instead, invalidate the temporary RAM
region by virtual address, which is the only memory region we will
be touching with the caches and MMU both disabled and enabled,
which will lead to data corruption if data written with the MMU off
is shadowed by clean, stale cachelines that stick around when the
MMU is enabled again.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
While the alternative PEI-less SEC implementation in PrePi already
takes the EnableVFP PCD into account, the PrePeiCore code does not,
and so we may end up triggering synchronous exception when code
attempts to use FP or SIMD registers, which is permitted on AARCH64
by the spec.
So enable the VFP as early as feasible if the associated PCD is set.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PrePeiCoreMPCore reuses the GUID of its unicore sibling, which is
usually fine, given that platforms never include both. However, it
prevents us from creating a package .DSC that does include both, so
update the GUID to a fresh one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DEBUG builds of PEI code will print a diagnostic message regarding
the utilization of temporary RAM before switching to permanent RAM.
For example,
Total temporary memory: 16352 bytes.
temporary memory stack ever used: 4820 bytes.
temporary memory heap used for HobList: 4720 bytes.
Tracking stack utilization like this requires the stack to be seeded
with a known magic value, and this needs to occur before entering C
code, given that it uses the stack. Currently, only Nt32Pkg appears
to implement this feature, but it is useful nonetheless, so let's
wire it up for PrePeiCore.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the PrePeiCore init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18994 6f19259b-4bc3-4df7-8a09-765794883524
This PCD has been replaced by ArmPlatformIsPrimaryCore() function.
Althrough this PCD is still used in some occasions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16026 6f19259b-4bc3-4df7-8a09-765794883524
Some non-GCC toolchain might support the GNU assembly language.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15504 6f19259b-4bc3-4df7-8a09-765794883524
Checking if a core if the primary/boot core used to be done with the macro
IS_PRIMARY_CORE().
Some platforms exposes configuration registers to change the primary core.
Replacing the macro IS_PRIMARY_CORE() by ArmPlatformIsPrimaryCore() allows
some flexibility in the way to check the primary core.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14344 6f19259b-4bc3-4df7-8a09-765794883524
The function 'ArmGicAcknowledgeSgiFrom' was actually acknowledging Interrupts (and not only SGIs).
ArmPkg/ArmGicLib: Introduced the PCD PcdGicPrimaryCoreId
This PCD defines the Id of the primary core in the GIC.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13259 6f19259b-4bc3-4df7-8a09-765794883524
This library hides where the 'XIP' Global Variable are located in the memory.
It is expected the Sec/PrePi modules define the Global Variable area through
the GlobalVariable HOB.
The ArmPlatformGlobalVariableLib library allows access to global variables by
their offsets in this region.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12420 6f19259b-4bc3-4df7-8a09-765794883524
The denomination 'Normal' was used to make reference to the 'Normal'
or 'Non Secure' or 'Non Trusted' world.
To avoid confusion, this prefix has been removed from PCDs to define
the normal world.
The PCDs explicitely related to the Secure/Trusted World continue to
have the 'Sec' prefix.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12416 6f19259b-4bc3-4df7-8a09-765794883524
In the previous version, every cores had the same stack size.
To avoid to waste memory with secondary core stacks, the primary core stack
size is now different from the secondary cores stack size.
These are the Stack PCDs and their default values:
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecPrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecSecondaryStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresSecMonStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecMonStackSize|0x1000
gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0
gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x10000
gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x1000
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12415 6f19259b-4bc3-4df7-8a09-765794883524
On MpCore system, the primary core can now be any core of the system.
To identify the primary core, you can use 'gArmTokenSpaceGuid.PcdArmPrimaryCoreMask'
and 'gArmTokenSpaceGuid.PcdArmPrimaryCore'.
These PCDs by default use the ClusterId and CoreId to identify the core. And the
primary core is defined as the ClusetrId=0 and CoreId=0.
The helper macros are: IS_PRIMARY_CORE(MpId), GET_CORE_ID(MpId), GET_CLUSTER_ID(MpId),
GET_CORE_POS(MpId), PRIMARY_CORE_ID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12412 6f19259b-4bc3-4df7-8a09-765794883524
This library is the interface for the ARM Generic Interrupt Controller
Architecture Specification.
ARM Platform can use any GIC controller (not necessary PL390 GIC).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12411 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
Feature PCDs cannot be used in assembly files.
The PcdStandalone PCD is needed in one of the assembly file of the
ArmPlatformPkg/PrePi module.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11952 6f19259b-4bc3-4df7-8a09-765794883524
With this change, we now have these following PCDs values to define the
location of the Secure and Normal firmwares:
- gArmTokenSpaceGuid.PcdSecureFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdSecureFv(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFd(BaseAddress|Size)
- gArmTokenSpaceGuid.PcdNormalFv(BaseAddress|Size)
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11806 6f19259b-4bc3-4df7-8a09-765794883524
The size of this memory is controlled by a PCD. The Global Variable in this regsion are defined by their offset.
This memory region can be use to store the PEI Services Table Pointer.
Update the PeiServicesTablePointerLib to use this region instead of PcdPeiServicePtrAddr.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11803 6f19259b-4bc3-4df7-8a09-765794883524
Exception errors and early print statements must be also print out in Release builds.
Replace the DEBUG() macro by the SerialPortWrite() function.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11474 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Ard Biesheuvel
Laszlo Ersek
Michael D Kinney
Olivier Martin
Ronald Cron
Brendan Jackman
Harry Liebel
oliviermartin
andrewfish