BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A hypervisor is not allowed to update an SEV-ES guests register state,
so when booting an SEV-ES guest AP, the hypervisor is not allowed to
set the RIP to the guest requested value. Instead, an SEV-ES AP must be
transition from 64-bit long mode to 16-bit real mode in response to an
INIT-SIPI-SIPI sequence. This requires a 16-bit code segment descriptor.
For PEI, create this descriptor in the reset vector GDT table. For DXE,
create this descriptor from the newly reserved entry at location 0x28.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Fix few typos in comments and documentation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-77-philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1039
Current implementation not checks system mode before using
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.X64 or
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.Ia32. This patch check the
mode before using the correct one.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Today's code defines macros like CR0_PG, CR0_WP, CR4_PSE, CR4_PAE
when checking whether individual bits are set in CR0 or CR4 register.
The patch changes the code to use IA32_CR0 and IA32_CR4 structure
defined in MdePkg/Include/Library/BaseLib.h so that the module
local macros can be removed.
There is no functionality impact to this change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576
The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.
If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.
Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.
Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.
Fixes: dcc026217f16b918bbaf
Test:
- Pass special test of accessing memory beyond 4G in SMM mode
- Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
Windows7, Windows10)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The freed-memory guard feature will cause a recursive calling
of InitializePageTablePool(). This is due to a fact that
AllocateAlignedPages() is used to allocate page table pool memory.
This function will most likely call gBS->FreePages to free unaligned
pages and then cause another round of page attributes change, like
below (freed pages will be always marked not-present if freed-memory
guard is enabled)
FreePages() <===============|
=> CpuSetMemoryAttributes() |
=> <if out of page table> |
=> InitializePageTablePool() |
=> AllocateAlignedPages() |
=> FreePages() ================|
The solution is add a global variable as a lock in page table pool
allocation function and fail any other requests if it has not been
done.
Since this issue will only happen if free-memory guard is enabled,
it won't affect CpuSetMemoryAttributes() in default build of a BIOS.
If free-memory guard is enabled, it only affect the pages
(failed to mark them as not-present) freed in AllocateAlignedPages().
Since those freed pages haven't been used yet (their addresses not
yet exposed to code outside AllocateAlignedPages), it won't compromise
the freed-memory guard feature.
This change will just fail the CpuSetMemoryAttributes() called from
FreePages() but it won't fail the FreePages(). So the error status
won't be propagated upper layer of code.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Non-stop mode was introduced / explained in commit 8f2613628a
("MdeModulePkg/MdeModulePkg.dec: add new settings for PCDs",
2018-08-30).
The macro HEAP_GUARD_NONSTOP_MODE was added to CpuDxe in commit
dcc026217f ("UefiCpuPkg/CpuDxe: implement non-stop mode for uefi",
2018-08-30).
Another instance of the macro HEAP_GUARD_NONSTOP_MODE was added to
PiSmmCpuDxeSmm -- with BIT1|BIT0 replaced with BIT3|BIT2 -- in commit
09afd9a42a ("UefiCpuPkg/PiSmmCpuDxeSmm: implement non-stop mode for
SMM", 2018-08-30)
Since the freed-memory guard is for UEFI-only. This patch only updates
HEAP_GUARD_NONSTOP_MODE in "UefiCpuPkg/CpuDxe/CpuDxe.h" (add BIT4).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Some redundant library classes Ppis and GUIDs
have been removed in inf, .c and .h files.
v2:
1.Remove ReadOnlyVariable2.h in S3Resume.c which should be
deleted in last version in which gEfiPeiReadOnlyVariable2PpiGuid
was removed.
2.Remove the library class BaseLib in CpuPageTable.c
which is included elsewhere.
3.Add library classes in SecCore.inf which are removed
at last version.
They are DebugAgentLib and CpuExceptionHandlerLib.
4.Add two Ppis in SecCore.inf which are removed
at last version.
They are gEfiSecPlatformInformationPpiGuid and
gEfiSecPlatformInformation2PpiGuid.
https://bugzilla.tianocore.org/show_bug.cgi?id=1043https://bugzilla.tianocore.org/show_bug.cgi?id=1013https://bugzilla.tianocore.org/show_bug.cgi?id=1032https://bugzilla.tianocore.org/show_bug.cgi?id=1016
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1164
The left operand is 64-bit but right operand could be 32-bit.
A typecast is a must because of '~' op before it.
Cc: Hao A Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ#: https://bugzilla.tianocore.org/show_bug.cgi?id=1160
There're two parameters which have different name in comment and prototype.
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
BZ#1127: https://bugzilla.tianocore.org/show_bug.cgi?id=1127
It's reported the debug message in CpuDxe driver is quite annoying in
boot and shell, and slow down the boot process. To solve this issue,
this patch changes the DEBUG_INFO to DEBUG_VERBOSE. On a typical Intel
real platform, at least 16s boot time can be saved.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Same as SMM profile feature, a special #PF is used to set page attribute
to 'present' and a special #DB handler to reset it back to 'not-present',
right after the instruction causing #PF got executed.
Since the new #PF handler won't enter into dead-loop, the instruction
which caused the #PF will get chance to re-execute with accessible pages.
The exception message will still be printed out on debug console so that
the developer/QA can find that there's potential heap overflow or null
pointer access occurred.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Current IsInSmm() method makes use of gEfiSmmBase2ProtocolGuid.InSmm() to
check if current processor is in SMM mode or not. But this is not correct
because gEfiSmmBase2ProtocolGuid.InSmm() can only detect if the caller is
running in SMRAM or from SMM driver. It cannot guarantee if the caller is
running in SMM mode. Because SMM mode will load its own page table, adding
an extra check of saved DXE page table base address against current CR3
register value can help to get the correct answer for sure (in SMM mode or
not in SMM mode).
There's indiscriminate uses of Context.X64 and Context.Ia32 in code which
is not a good coding practice and will cause potential issue. In addition,
the related structure type definition is not packed and has also potential
issue. This will not be covered by this patch but be tracked by a bug below.
https://bugzilla.tianocore.org/show_bug.cgi?id=1039
This is an issue caused by check-in at
2a1408d1d7
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
The MdePkg/Library/SmmMemoryAllocationLib, used only by DXE_SMM_DRIVER,
allows to free memory allocated in DXE (before EndOfDxe). This is done
by checking the memory range and calling gBS services to do real
operation if the memory to free is out of SMRAM. If some memory related
features, like Heap Guard, are enabled, gBS interface will turn to
EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes(), provided by
DXE driver UefiCpuPkg/CpuDxe, to change memory paging attributes. This
means we have part of DXE code running in SMM mode in certain
circumstances.
Because page table in SMM mode is different from DXE mode and CpuDxe
always uses current registers (CR0, CR3, etc.) to get memory paging
attributes, it cannot get the correct attributes of DXE memory in SMM
mode from SMM page table. This will cause incorrect memory manipulations,
like fail the releasing of Guard pages if Heap Guard is enabled.
The solution in this patch is to store the DXE page table information
(e.g. value of CR0, CR3 registers, etc.) in a global variable of CpuDxe
driver. If CpuDxe detects it's in SMM mode, it will use this global
variable to access page table instead of current processor registers.
This can avoid retrieving wrong DXE memory paging attributes and changing
SMM page table attributes unexpectedly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
NASM has replaced ASM and S files.
1. Remove ASM from all modules expect for the ones in ResetVector directory.
The ones in ResetVector directory are included by Vtf0.nasmb. They are
also nasm style.
2. Remove S files from the drivers only.
3. https://bugzilla.tianocore.org/show_bug.cgi?id=881
After NASM is updated, S files can be removed from Library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The reason doing this is that we found that calling StartupAllAps() to
flush TLB for all APs in CpuDxe driver after changing page attributes
will spend a lot of time to complete. If there are many page attributes
update requests, the whole system performance will be slowed down
explicitly, including any shell command and UI operation.
The solution is removing the flush operation for AP in CpuDxe driver
and let AP flush TLB after woken up.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
If features like memory profile, protection and heap guard are enabled,
a lot of more memory page attributes update actions will happen than
usual. An unnecessary sync of CR0.WP setting among APs will then cause
worse performance in memory allocation action. Removing the calling of
SyncMemoryPageAttributesAp() in function DisableReadOnlyPageWriteProtect
and EnableReadOnlyPageWriteProtect can fix this problem. In DEBUG build
case, the boot performance can be boosted from 11 minute to 6 minute.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory and EfiReservedMemoryType,
the BIOS will hang at a page fault exception randomly.
The root cause is that the memory allocation for driver images (actually
a memory type conversion from free memory, type of EfiConventionalMemory,
to code memory, type of EfiBootServicesCode/EfiRuntimeServicesCode)
will get memory with NX set, because the CpuDxe driver will keep the NX
attribute (with free memory) in page directory during page table splitting
and then override the NX attribute of all its entries.
This patch fixes this issue by not inheriting NX attribute when turning
a page entry into a page directory during page granularity split.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In 32-bit mode, the BIOS will not create page table for memory beyond
4GB and therefore it cannot handle the attributes change request for
those memory. But current CpuDxe doesn't check this situation and still
try to complete the request, which will cause attributes of incorrect
memory address to be changed due to type cast from 64-bit to 32-bit.
This patch fixes this issue by checking the end address of input
memory block and returning EFI_UNSUPPORTED if it's out of range.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
One of the functionalities of CpuDxe is to update memory paging attributes.
If page table protection is applied, it must be disabled temporarily before
any attributes update and enabled again afterwards.
This patch makes use of the same way as DxeIpl to allocate page table memory
from reserved memory pool, which helps to reduce potential "split" operation
and recursive calling of SetMemorySpaceAttributes().
Laszlo (lersek@redhat.com) did a regression test on QEMU virtual platform with
one middle version of this series patch. The details can be found at
https://lists.01.org/pipermail/edk2-devel/2017-December/018625.html
There're a few changes after his work.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In current MP implementation, BSP and AP shares the same exception
configuration. Stack switch required by Stack Guard feature needs that BSP
and AP have their own configuration. This patch adds code to ask BSP and AP
to do exception handler initialization separately.
Since AP is not supposed to do memory allocation, all memory needed to
setup stack switch will be reserved in BSP and pass to AP via new API
EFI_STATUS
EFIAPI
InitializeCpuExceptionHandlersEx (
IN EFI_VECTOR_HANDOFF_INFO *VectorInfo OPTIONAL,
IN CPU_EXCEPTION_INIT_DATA *InitData OPTIONAL
);
Following two new PCDs are introduced to configure how to setup new stack
for specified exception handlers.
gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList
gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
Reviewed-by: Jiewen.yao@intel.com
More than one entry of RT_CODE memory might cause boot problem for some
old OSs. This patch will fix this issue to keep OS compatibility as much
as possible.
More detailed information, please refer to
https://bugzilla.tianocore.org/show_bug.cgi?id=753
Laszlo did a thorough test on OVMF emulated platform. The details can be found
at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Heap guard feature will frequently update page attributes. The debug message
in CpuDxe driver will slow down the boot performance noticeably. Changing the
debug level to DEBUG_VERBOSE to reduce the message output for normal debug
configuration.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This patch is to fix an assert issue during booting IA32 platforms
such as OvmfIa32 or Quark. This issue is caused by trying to access
page table on a platform without page table. A check is added to
avoid the assert.
Bug tracker: https://bugzilla.tianocore.org/show_bug.cgi?id=724
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
There're uninitialized variables warning reported by GCC.
This patch will fix it. The original commit is
c1cab54ce5
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Anthony PERARD <anthony.perard@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
From CpuDxe driver perspective, it doesn't update GCD memory attributes from
current page table setup during its initialization. So the memory attributes in
GCD might not reflect all memory attributes in real world.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
"Detect CPU count: %d\n" is an informative message, not an error report.
Set its debug mask to DEBUG_INFO.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In order to not use the deprecated macro, refine
get mtrr mask value logic.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In PEI phase, BSP did not program vitural wired mode while APs did.
Move program virtual wired mode from CpuDxe to MpInitLib, thus it could benefit
on both CpuDxe and CpuMpPei.
https://bugzilla.tianocore.org/show_bug.cgi?id=496
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The architectural MSR MSR_IA32_MISC_ENABLE is not supported by AMD processors.
Because reading CPUID.80000001H:EDK[20] is enough to check if XD feature is
supported or not, we just remove checking MSR_IA32_MISC_ENABLE(0x1A0).
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when page tables entries are created or modified.
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Platform PEI may add LOCAL APIC memory mapped space into
EFI_HOB_MEMORY_ALLOCATION. Or platform may allocate this range before.
So, we skip AllocateMemorySpace()'s return status checking. Instead, we add one
DEBUG message for possible trace.
https://bugzilla.tianocore.org/show_bug.cgi?id=390
This updating is suggested by Ersek's comments at
https://www.mail-archive.com/edk2-devel@lists.01.org/msg22585.html
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Current CpuGetTimerValue() implementation return hard code TimerPeriod value. We
could calculate the actual TimerPeriod value over period of time (100us) at the
first time invoking CpuGetTimerValue() and save the TimerPeriod value into one
global variable to avoid delay at the next CpuGetTimerValue() invoking.
https://bugzilla.tianocore.org/show_bug.cgi?id=382
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Local APIC memory mapped space should be added into GCD and be allocated.
Otherwise, UEFI firmware cannot get correct memory map for it. For example,
SMM profile feature needs to get the completed MMIO map to protect them.
v2:
Consume AddMemoryMappedIoSpace() to handle the case that Local APIC
memory space has already been added before.
https://bugzilla.tianocore.org/show_bug.cgi?id=390
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add memory attribute setting in CpuArch protocol.
Previous SetMemoryAttributes() API only supports cache attribute setting.
This patch updated SetMemoryAttributes() API to support memory attribute
setting by updating CPU page table.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tom Lendacky
Oleksiy Yakovlev
Antoine Coeur
Dong, Eric
Ni, Ray
Michael D Kinney
Jian J Wang
shenglei
Liming Gao
Dandan Bi
Laszlo Ersek
Jeff Fan
Leo Duran
Jiewen Yao