1. Fix the incorrect definition of EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 (does not conform to the UEFI spec) in PciIo.h.
2. Add missing definitions of ISA and VGA IO attributes in PCI Root Bridge IO protocol.
3. Improve the algorithm in the PCI bus driver to get PCI platform policy from PCI Platform Protocol and PCI Override Protocol.
4. Update the PCI bus driver to use the PCI platform policy to determine the supported attributes that are returned by the EFI_PCI_IO_PROTOCOL.Attributes() function. This is required by the PI spec.
5. Add a backward compatibility workaround for PCI VGA drivers in Option ROM, which typically sets VGA_IO without checking supported attributes.
6. Update the PCI host bridge driver in PcAtChipsetPkg to report VGA_IO_16 and ISA_IO_16 instead of VGA_IO/ISA_IO attributes. Modern chipsets don’t have hardware capability to control 10-bit or 16-bit decoding for ISA/VGA aliases.
7. Update LPC/VGA device drivers to check supported attributes of VGA_IO/VGA_IO_16 or ISA_IO/ISA_IO_16.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11204 6f19259b-4bc3-4df7-8a09-765794883524
2. update SerialNumber comparing logic to handle possible NULL-terminator in WWID device path
3. fix bug in UsbIo->UsbIoGetSupportedLanguages(): TableSize is size in bytes of LangIDTable instead of number of LangID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11197 6f19259b-4bc3-4df7-8a09-765794883524
This check-in fix the issue by adding a flag to indicate if a HPC is found during PCI enumeration or not. This check-in also adds a debug message if any found HPC failed with initialization.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11081 6f19259b-4bc3-4df7-8a09-765794883524
This solution defines a PCD Feature Flag to enabled support for unaligned requests through the PCI I/O Protocol. This flag is disabled by default. Platforms that do want to support such EFI/UEFI drivers that make unaligned PCI I/O requests should enable this feature.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11016 6f19259b-4bc3-4df7-8a09-765794883524
But current PCI bus driver has a bug that if a P2P bridge has no child devices detected during enumeration, the bits won’t be set. This may impact PCI hot plug capable bridges because the OS may re-assign resources for them causing the reserved resource by the firmware will be overwritten.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11013 6f19259b-4bc3-4df7-8a09-765794883524
These comparisons were not comparing an enum variable
with a member of the same enum type.
GCC 4.5 generated a warning for these comparison
operations.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10932 6f19259b-4bc3-4df7-8a09-765794883524
1. Expand the type of Offset in the _PCI_BAR structure from UINT8 to UINT16, because a VF BAR’s offset may be >= 0x100;
2. Enable ARI Capable Hierarchy for SR-IOV devices at earlier time because FirstVFOffset and VFStride of a SR-IOV device may change after its ARI Capable Hierarchy is set;
3. Change type of PcdSrIovSupport, PcdAriSupport, PcdMrIovSupport from FeatureFlag to [FixAtBuild, PcdDynamics], which allows SR-IOV/MR-IOV/ARI feature can be turn on/off dynamically, typically via a setup option.
4. Change PCI bus scan algorithm in PciScanBus() to prevent the case where some ARI extended functions may be skipped in the scan loop.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10644 6f19259b-4bc3-4df7-8a09-765794883524
A linked list is created for the list of PCI Root Bridges in the platform. This list is then traversed to enumerate each PCI Root Bridge. After enumeration, the RootBridgeDev is destroyed, but it was not removed from the linked list before it was destroyed. This left the linked list of PCI Root Bridges in a bad state, specially if memory is cleared on frees, or the freed buffer was reallocated.
The fix is to remove the node from the linked list before the RootBridgeDev is destroyed.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10463 6f19259b-4bc3-4df7-8a09-765794883524
current uefi spec only supports interrupt in endpoint.
but there are usb devices which support interrupt out endpoint. we propose to update uefi spec to remove the limitation. after the ecr is approved, the corresponding patch will be submitted.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10205 6f19259b-4bc3-4df7-8a09-765794883524
1. Layer on UEFI 2.2 ATA pass through protocol to perform ATA transaction.
2. Produce Block IO and DiskInfo protocol for each ATA devices.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9585 6f19259b-4bc3-4df7-8a09-765794883524
SCSI Interface GUID: Physical SCSI disk
IDE Interface GUID: ATAPI device run in legacy IDE mode
AHCI Interface GUID: ATAPI device run in AHCI mode.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9584 6f19259b-4bc3-4df7-8a09-765794883524
a. Update PciBusDxe module, and move it from IntelFrameworkModulePkg to MdeModulePkg
b. Move IncompatiblePciDeviceSupportDxe module from IntelFrameworkModulePkg to MdeModulePkg
c. Update the related consumes in inf/dsc/fdf
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9347 6f19259b-4bc3-4df7-8a09-765794883524
Increase the value of USB_GENERAL_DEVICE_REQUEST_TIMEOUT from
50 milliseconds to 100 milliseconds. This provides a work around
for slower USB hubs and devices.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9330 6f19259b-4bc3-4df7-8a09-765794883524
a. Add check validation of RemainingDevicePath in Supported()
b. In Star() function, if RemaingDevicePath is the End of Device Path Node, don't create child device and return EFI_SUCCESS.
2. fixed one device path issue in ScsiBus driver.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9264 6f19259b-4bc3-4df7-8a09-765794883524
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
1. remove unused macro/remove unnecessary included header file
2. for those values defined by PCI spec, use the naming of definition in IndustryStandard/Pci.h
3. use BITX macro in Base.h rather than define one by self.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8992 6f19259b-4bc3-4df7-8a09-765794883524
Root cause is that Read Capacity command returns media not present error, then UsbMassStorage driver issues Sense Request command to get the sense data. However, the USB floppy drive still returns the previous error for the Sense Request command. UsbBootRequestSense() does not handle this case correctly and returns EFI_SUCCESS so that the block size of the Block IO protocol instance is set to be 0.
Solution is to fix the logic to handle the case and add protective logic to avoid setting block size to be 0.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8979 6f19259b-4bc3-4df7-8a09-765794883524
///
/// Standard INQUIRY data format
///
typedef struct {
UINT8 Peripheral_Type : 5;
UINT8 Peripheral_Qualifier : 3;
UINT8 DeviceType_Modifier : 7;
UINT8 Rmb : 1;
UINT8 Version;
UINT8 Response_Data_Format;
UINT8 Addnl_Length;
UINT8 Reserved_5_95[95 - 5 + 1];
} EFI_SCSI_INQUIRY_DATA;
is longer than 36 bytes and EFI_BAD_BUFFER_SIZE may be returned if the actual inquiry data is less than that of EFI_SCSI_INQUIRY_DATA.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8329 6f19259b-4bc3-4df7-8a09-765794883524
The "HiiLib" prefix for all HII Library API function names changed to "Hii".
Remove:
HiiLibPreparePackageList(), replaced by HiiAddPackages()
HiiLibNewString(), replaced by HiiSetString()
HiiLibGetStringFromHandle(), replaced by HiiGetString()
HiiLibGetStringFromToken(), replaced by HiiGetPackageString()
HiiLibExtractGuidFromHiiHandle()
HiiLibDevicePathToHiiHandle()
HiiLibGetSupportedSecondaryLanguages()
HiiLibGetSupportedLanguageNumber()
HiiLibExportPackageLists()
HiiLibListPackageLists()
Interface change:
HiiAddPackages()
HiiSetString()
HiiGetString()
HiiGetHiiHandles()
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8083 6f19259b-4bc3-4df7-8a09-765794883524
mdkinney
rsun3
xdu2
erictian
vanjeff
jljusten
ydong10
qhuang8
li-elvin
niruiyu
hhtian
lgao4
andrewfish
xli24
davidhuang
eric_tian
AJFISH
gikidy