Currently, if BSP election is not enabled, will use Core0 as SMM BSP.
However, Core0 does not always have the highest performance.
So, we can used NonSmm BSP as default BSP.
This will take effect in normal SMM init flow and S3 boot flow.
In normal SMM flow, the code is executed before first SMI.
In S3 flow, the code is executed in Non-SMM BSP's first SMI, where the
gSmmCpuPrivate keeps the data from last boot.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
PiSmmCore fetches the EFI memory map and calls SplitTable() to
split each loaded image section into its own descriptor with
EFI_MEMORY_XP marking data sections and EFI_MEMORY_RO marking
code sections.
The SMM MAT logic is almost identical to the DXE MAT logic but goes
a step further and also updates the memory map descriptors which describe
image code and data sections to be of type EfiRuntimeServicesCode and
EfiRuntimeServicesData respectively. The consolidated MAT logic
(present in the new ImagePropertiesRecordLib) more closely follows
the DXE MAT logic which identifies image code sections by the presence
of the attribute EFI_MEMORY_RO in the descriptor and image data
sections by the presence of the attribute EFI_MEMORY_XP. Because of
the flow choice of the consolidated MAT logic, the SMM MAT logic should
just use the attributes from the table returned by SplitTable().
Additionally, the function EnforceMemoryMapAttribute() in the SMM MAT
logic will ensure that the CODE and DATA memory types have the desired
attributes so bisecting this patch series at this commit will still
function as before.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Root cause:
1. Before DisableReadonlyPageWriteProtect() is called, the return
address (#1) is pushed in shadow stack.
2. CET is disabled.
3. DisableReadonlyPageWriteProtect() returns to #1.
4. Page table is modified.
5. EnableReadonlyPageWriteProtect() is called, but the return
address (#2) is not pushed in shadow stack.
6. CET is enabled.
7. EnableReadonlyPageWriteProtect() returns to #2.
#CP exception happens because the actual return address (#2)
doesn't match the return address stored in shadow stack (#1).
Analysis:
Shadow stack will stop update after CET disable (DisableCet() in
DisableReadOnlyPageWriteProtect), but normal smi stack will be
continue updated with the function called and return
(DisableReadOnlyPageWriteProtect & EnableReadOnlyPageWriteProtect),
thus leading stack mismatch after CET re-enabled (EnableCet() in
EnableReadOnlyPageWriteProtect).
According SDM Vol 3, 6.15-Control Protection Exception:
Normal smi stack and shadow stack must be matched when CET enable,
otherwise CP Exception will happen, which is caused by a near RET
instruction.
CET is disabled in DisableCet(), while can be enabled in
EnableCet(). This way won't cause the problem because they are
implemented in a way that return address of DisableCet() is
poped out from shadow stack (Incsspq performs a pop to increases
the shadow stack) and EnableCet() doesn't use "RET" but "JMP" to
return to caller. So calling EnableCet() and DisableCet() doesn't
have the same issue as calling DisableReadonlyPageWriteProtect()
and EnableReadonlyPageWriteProtect().
With above root cause & analysis, define below 2 macros instead of
functions for WP & CET operation:
WRITE_UNPROTECT_RO_PAGES (Wp, Cet)
WRITE_PROTECT_RO_PAGES (Wp, Cet)
Because DisableCet() & EnableCet() must be in the same function
to avoid shadow stack and normal SMI stack mismatch.
Note: WRITE_UNPROTECT_RO_PAGES () must be called pair with
WRITE_PROTECT_RO_PAGES () in same function.
Change-Id: I4e126697efcd8dbfb4887da034d8691bfca969e3
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Use MpService2Ppi to wakeup AP in s3 boot flow during initializing
CPU. If mSmmS3ResumeState->MpService2Ppi is not 0, then BSP will
use MpService2Ppi->StartupAllCPUs to do CPU initialization for both
BSP and AP instead of only sending InitSipiSipi for AP.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
This commit is code logic refinement for s3 boot flow
in CpuS3.c. It doesn't change any code functionality.
This commit implementes InitializeAp and InitializeBsp
as a single function since they are doing almost the
same thing. Then both BSP and AP will execute the same
function InitializeCpuProcedure to do CPU initialization.
This can make the code logic easier to understand.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Some features like RAS need to use processor extended information
under smm, So add code to support it
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Removes SmmCpuFeaturesReadSaveStateRegister and
SmmCpuFeaturesWirteSaveStateRegister function from
SmmCpuFeaturesLib library.
MmSaveStateLib library replaces the functionality of the above
functions.
Platform old/new need to use MmSaveStateLib library to read/write save
state registers.
Current implementation supports Intel and AMD.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Remove unnecessary function SetNotPresentPage(). We can directly
use ConvertMemoryPageAttributes to set a range to non-present.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This commit is code refinement to current smm runtime InitPaging()
page table update code. In InitPaging(), if PcdCpuSmmProfileEnable
is TRUE, use ConvertMemoryPageAttributes() API to map the range in
mProtectionMemRange to the attrbute recorded in the attribute field
of mProtectionMemRange, map the range outside mProtectionMemRange
as non-present. If PcdCpuSmmProfileEnable is FALSE, only need to
set the ranges not in mSmmCpuSmramRanges as NX.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Sort mProtectionMemRange in InitProtectedMemRange() when
ReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Sort mSmmCpuSmramRanges after get the SMRAM info in
FindSmramInfo() function.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Use GenSmmPageTable() to create both IA32 and X64 Smm S3
page table.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This commit is code refinement to current smm pagetable generation
code. Add a new GenSmmPageTable() API to create smm page table
based on the PageTableMap() API in CpuPageTableLib. Caller only
needs to specify the paging mode and the PhysicalAddressBits to map.
This function can be used to create both IA32 pae paging and X64
5level, 4level paging.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Extern mSmmShadowStackSize in PiSmmCpuDxeSmm.h and remove
extern for mSmmShadowStackSize in c files to simplify code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Clear CR0.WP before modify smm page table. Currently, there is
an assumption that smm pagetable is always RW before ReadyToLock.
However, when AMD SEV is enabled, FvbServicesSmm driver calls
MemEncryptSevClearMmioPageEncMask to clear AddressEncMask bit
in smm page table for this range:
[PcdOvmfFdBaseAddress,PcdOvmfFdBaseAddress+PcdOvmfFirmwareFdSize]
If page slpit happens in this process, new memory for smm page
table is allocated. Then the newly allocated page table memory
is marked as RO in smm page table in this FvbServicesSmm driver,
which may lead to PF if smm code doesn't clear CR0.WP before
modify smm page table when ReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Add two functions to disable/enable CR0.WP. These two unctions
will also be used in later commits. This commit doesn't change any
functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In PiSmmCpuDxeSmm code, SetMemMapAttributes() marks memory ranges
in SmmMemoryAttributesTable to RO/NX. There may exist non-present
range in these memory ranges. Set other attributes for a non-present
range is not permitted in CpuPageTableMapLib. So add code to handle
this case. Only map the present ranges in SmmMemoryAttributesTable
to RO or NX.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In ConvertMemoryPageAttributes() function, when clear RP for a
specific range [BaseAddress, BaseAddress + Length], it means to
set the present bit to 1 and assign default value for other
attributes in page table. The default attributes for the input
specific range are NX disabled and ReadOnly. If there is existing
present range in [BaseAddress, BaseAddress + Length] and the
attributes are not NX disabled or not ReadOnly, then output the
DEBUG message to indicate that the NX and ReadOnly attributes of
the existing present range are modified in the function.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Simplify the ConvertMemoryPageAttributes API to convert paging
attribute by CpuPageTableLib. In the new API, it calls
PageTableMap() to update the page attributes of a memory range.
With the PageTableMap() API in CpuPageTableLib, we can remove
the complicated page table manipulating code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
When a platform has lots of CPU cores/threads, perf-logging on every
AP produces lots of records. When this multiplies with number of SMIs
during post, the records are even more.
So, this patch adds a new PCD PcdSmmApPerfLogEnable (default TRUE)
to allow platform to turn off perf-logging on APs.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MP procedures are those procedures that run in every CPU thread.
The EDKII perf infra is not MP safe so it doesn't support to be called
from those MP procedures.
The patch adds SMM MP perf-logging support in SmmMpPerf.c.
The following procedures are perf-logged:
* SmmInitHandler
* SmmCpuFeaturesRendezvousEntry
* PlatformValidSmi
* SmmCpuFeaturesRendezvousExit
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4424
In Relaxed-AP Sync Mode, BSP will not wait for all Aps arrive. However,
PerformRemainingTasks() needs to wait all Aps arrive before calling
SetMemMapAttributes and ConfigSmmCodeAccessCheck() when mSmmReadyToLock
is true. In SetMemMapAttributes(), SmmSetMemoryAttributesEx() will call
FlushTlbForAll() that need to start up the aps. So it need to let all
aps arrive. Same as SetMemMapAttributes(), ConfigSmmCodeAccessCheck()
also will start up the aps.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4431
In Ap relaxed mode, some SMI handlers should call SmmWaitForApArrival() to let all ap arrive in SmmCpuRendezvous(). But in traditional mode, these SMI handlers don't need to call SmmWaitForApArrival() again. So it need to be check cpu sync mode before calling SmmWaitForApArrival().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiCpuPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
BufferPages is UINTN, so we need "%Lu" when printing it to avoid
it being truncated. Also cast to UINT64 to make sure it works
for 32bit builds too.
Fixes: 4f441d024b ("UefiCpuPkg/PiSmmCpuDxeSmm: fix error handling")
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
ASSERT() is not proper handling of allocation failures, it gets compiled
out on RELEASE builds. Print a message and enter dead loop instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
It's highly unlikely the code ever runs on processors which are
almost 30 years old. Drop the code handling them.
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=4345
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4368
This issue is caused by the commit:
ec07fd0e35
GetFirstGuidHob() should not be used after exit boot service.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib, remove the
dependency of UefiCpuLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4337
Existing SMBASE Relocation is in the PiSmmCpuDxeSmm driver, which
will relocate the SMBASE of each processor by setting the SMBASE
field in the saved state map (at offset 7EF8h) to a new value.
The RSM instruction reloads the internal SMBASE register with the
value in SMBASE field when each time it exits SMM. All subsequent
SMI requests will use the new SMBASE to find the starting address
for the SMI handler (at SMBASE + 8000h).
Due to the default SMBASE for all x86 processors is 0x30000, the
APs' 1st SMI for rebase has to be executed one by one to avoid
the processors over-writing each other's SMM Save State Area (see
existing SmmRelocateBases() function), which means the next AP has
to wait for the previous AP to finish its 1st SMI, then it can call
into its 1st SMI for rebase via Smi Ipi command, thus leading the
existing SMBASE Relocation has to be running in series. Besides, it
needs very complex code to handle the AP exit semaphore
(mRebased[Index]), which will hook return address of SMM Save State
so that semaphore code can be executed immediately after AP exits
SMM for SMBASE relocation (see existing SemaphoreHook() function).
With SMM Base Hob support, PiSmmCpuDxeSmm does not need the RSM
instruction to do the SMBASE Relocation. SMBASE Register for each
processors have already been programmed and all SMBASE address have
recorded in SMM Base Hob. So the same default SMBASE Address
(0x30000) will not be used, thus the processors over-writing each
other's SMM Save State Area will not happen in PiSmmCpuDxeSmm driver.
This way makes the first SMI init can be executed in parallel and
save boot time on multi-core system. Besides, Semaphore Hook code
logic is also not required, which will greatly simplify the SMBASE
Relocation flow.
Mainly changes as below:
* Assume the biggest possibility of tile size is 8k.
* Combine 2 SMIs (gcSmmInitTemplate & gcSmiHandlerTemplate) into one
(gcSmiHandlerTemplate), the new SMI handler needs to run to 2 paths:
one to SmmCpuFeaturesInitializeProcessor(), the other to SMM Core
Entry Point.
* Issue SMI IPI (All Excluding Self SMM IPI + BSP SMM IPI) for first
SMI init before normal SMI sources happen.
* Call SmmCpuFeaturesInitializeProcessor() in parallel.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to replace mIsBsp by mBspApicId check.
mIsBsp becomes the local variable (IsBsp), then it can be
checked dynamically in the function. Instead, we define the
mBspApicId, which is to record the BSP ApicId used for
compare in SmmInitHandler. With this change, SmmInitHandler
can be run in parallel during SMM init.
Note:
This patch is the per-prepared work by refining the
SmmInitHandler, then, we can do the next step to
combine 2 SMIs (gcSmmInitTemplate & gcSmiHandlerTemplate)
into one (gcSmiHandlerTemplate), the new SMI handler
will call the SmmInitHandler in parallel to do the init.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4338
No need call InitializeMpSyncData during normal boot SMI init,
because mSmmMpSyncData is NULL at that time. mSmmMpSyncData is
allocated in InitializeMpServiceData, which is invoked after
normal boot SMI init (SmmRelocateBases).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4246
In function InitPaging, NumberOfPml5Entries is calculated by below code
NumberOfPml5Entries = (UINTN)LShiftU64 (1, SizeOfMemorySpace - 48);
If the SizeOfMemorySpace is larger than 48, NumberOfPml5Entries will be
larger than 1. However, this doesn't make sense if the hardware doesn't
support 5 level page table.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
When setting new page table pool to RO, only disable/enable WP when
Cr0.WP has been set to 1 to fix potential PF caused by b822be1a20
(UefiCpuPkg/PiSmmCpuDxeSmm: Introduce page table pool mechanism).
With previous code, if someone want to modify the page table and
Cr0.WP has been cleared before modify page table, Cr0.WP may be set
to 1 again since new pool may be generated during this process
Then PF fault may happens.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Simplify the code to set memory used by smm page table as RO.
Since memory used by smm page table are in PageTablePool list,
we only need to set all PageTablePool as ReadOnly in smm page
table itself. Also, we only need to flush tlb once after
setting all page table pool as Read Only.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Introduce page table pool mechanism for smm page table to simplify
page table memory management and protection. This mechanism has been
used in DxeIpl. The basic idea is to allocate a bunch of continuous
pages of memory in advance, and all future page tables consumption
will happen in those pool instead of system memory.
Since we have centralized page tables, we only need to mark all page
table pools as RO, instead of searching page table memory layer by
layer in smm page table. Once current page table pool has been used
up, another memory pool will be allocated and the new pool will also
be set as RO if current page table memory has been marked as RO.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=4195
1.Updated the GDT table in VTF0 to align with the one in S3Resume2Pei.
By doing so can simplify the changes to enable S3 in 64bit PEI.
2.Use SwitchStack() between PEI and SMM in S3 resume path when both
are in the same execution mode.
3.Transfer from PEI to OS waking vector by calling SwitchStack() when
both are in the same execution mode.
4.Removed the debug assertion in S3Resume.c to support 64bit PEI.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Chinni B Duggapu <chinni.b.duggapu@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
When build in DEBUG, the code asserts that 5LPage support is there
when the physical address width is larger than 48.
In a RELEASE build it will just force LA57 to 1 in CR4
even if CPUID(7).ECX[16] says it is not supported.
UefiCpuPkg: Bug fix in 5LPage handling
The hang (in the ASSERT) in DEBUG is not warranted as there are
legal configurations with CPUID(7).ECX[16](==LA57)=0
and with a physical address width of larger than 48 (like 52).
This is also supported by this code:
https://github.com/tianocore/edk2/blob/master/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c#L221
There (as long as physical address width is smaller or equal to 52)
any address width above 48 will be reduced to 48 and the
system can and will work without 5LPaging.
The forced setting of LA57 in CR4 (in the absence of LA57 in CPUID(7).ECX)
is a spec violation and should not happen.
Hence the proposed fix
a) removes the assert.
b) only returns TRUE from Is5LevelPagingNeeded if 5LPaging is actually
supported by HW.
Signed-off-by: Robert Guenzel <robert.guenzel@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4173
Due to more core count increasement, it's hard to reflect all APs
state via AP bitvector support in the register. Actually, SMM CPU
driver doesn't need to check each AP state to know all CPUs in SMI
or not, one alternative method is to check the SMM Delayed & Blocked
AP Count number:
APs in SMI + Blocked Count + Disabled Count >= All supported Aps
(code comments explained why can be > All supported Aps)
With above change, the returned value of "SmmRegSmmEnable" &
"SmmRegSmmDelayed" & "SmmRegSmmBlocked" from SmmCpuFeaturesLib
should be the AP count number within the existing CPU package.
For register that return the bitvector state, require
SmmCpuFeaturesGetSmmRegister() returns count number of all bit per
logical processor within the same package.
For register that return the AP count, require
SmmCpuFeaturesGetSmmRegister() returns the register value directly.
v3:
- Refine the coding style
v2:
- Rename "mPackageBspInfo" to "mPackageFirstThreadIndex"
- Clarify the expected value of "SmmRegSmmEnable" & "SmmRegSmmDelayed" &
"SmmRegSmmBlocked" returned from SmmCpuFeaturesLib.
- Thread: https://edk2.groups.io/g/devel/message/96722
v1:
- Thread: https://edk2.groups.io/g/devel/message/96671
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4083
In CPU relaxed mode, it doesn't reset the value of
mSmmMpSyncData->AllApArrivedWithException when BSP exit smm mode.
So this patch will reset this variable.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
This patch is code refactoring and doesn't change any functionality.
Remove mInternalCr3 in PiSmmCpuDxe pagetable related code. In previous
code, mInternalCr3 is used to pass address of page table which is
different from Cr3 register in different level of SetMemoryAttributes
function. Now remove it and pass the page table base address from the
root function parameter to simplify the code logic.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is code refactoring and doesn't change any functionality.
Add a new mIsShadowStack flag to identify whether current memory is
shadow stack. Previous smm code logic regards a RO range as shadow
stack and set the dirty bit in corresponding page table entry if
mInternalCr3 is not 0, which may be confusing.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF? https://bugzilla.tianocore.org/show_bug.cgi?id=3815
This patch define a new Protocol with the new services
SmmWaitForAllProcessor(), which can be used by SMI handler
to optionally wait for other APs to complete SMM rendezvous in
relaxed AP mode.
A new library SmmCpuRendezvousLib is provided to abstract the service
into library API to simple SMI handler code.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Zhihao Li <zhihao.li@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790
Replace Opcode with the corresponding instructions.
The code changes have been verified with CompareBuild.py tool, which
can be used to compare the results of two different EDK II builds to
determine if they generate the same binaries.
(tool link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild)
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the UefiCpuPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Zhiguang Liu
Taylor Beebe
Jiaxin Wu
Dun Tan
Zhang, Hongbin1
Abdul Lateef Attar
Ray Ni
Zhihao Li
Rebecca Cran
Gerd Hoffmann
Yu Pu
Kuo, Ted
Robert Guenzel
Jason
Michael Kubacki
Michael D Kinney