The BeagleBoard port used EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
for its reset handling. With the arrival
MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
As part of this, change BeagleBoardPkg/Library/ResetSystemLib to be an
implementation of ResetSystemLib instead of the previous
EfiResetSystemLib.
Wire all reset variants to ResetCold, except for ResetShutdown and
EnterS3WithImmediateWake, which return immediately.
Note: this ResetSystemLib never supported being called after
ExitBootservices, and this shortcoming is not addressed here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The base address for the interrupt controller is hard-coded in
Omap3530Interrupt.h, although Omap35xxPkg/InterruptDxe appears to
have initially intended to make use of PcdInterruptBaseAddress from
EmbeddedPkg. Move it to use said Pcd, and also declare use of it in
BeagleBoardLib, which makes a direct access.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 0bade1054d ("BeagleBoardPkg: Replaced the original DSC/FDF files
by their new versions that use the ARM Platform Framework"), which dates
back to 2011, modified BeagleBoardPkg to replace references to its Sec.inf,
Bds.inf and some of its library implementations to refer to versions under
ArmPlatformPkg instead. Since the original modules have been unused ever
since, we can safely remove them now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19788 6f19259b-4bc3-4df7-8a09-765794883524
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16325 6f19259b-4bc3-4df7-8a09-765794883524
Replace tabs by spaces for indentation to comply to EDK2 coding standards.
Done in files with extension ".S", ".c", ".h", ".asm", ".dsc", ".inc", "*.inf",
"*.dec" or ".fdf" and located in ArmPkg, ArmPlatformPkg, EmbeddedPkg,
BeagleBoardPkg or Omap35xxPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15901 6f19259b-4bc3-4df7-8a09-765794883524
The System Memory region might be out of the 32-bit memory space.
This change has been validated on the FVP AArch64 model using 4GB
of DRAM at 0x8_0000_0000:
- # System Memory (2GB)
- gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000
- gArmTokenSpaceGuid.PcdSystemMemorySize|0x80000000
+ # System Memory (4GB)
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x800000000
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x100000000
EFI Shell and Linux kernel boot successfully.
Note: This change has not been validated on AArch32. I expect some
early assembly code to not work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15093 6f19259b-4bc3-4df7-8a09-765794883524
- Used correct PCD
- Implement the function for AArch64, BeagleBoard, CTA15A7
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14937 6f19259b-4bc3-4df7-8a09-765794883524
This function allows platform to do any specific actions prior to
the start the PEI phase.
For instance, this function could be used by some platforms to initialize clocks that
are required at the early stage of the PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14347 6f19259b-4bc3-4df7-8a09-765794883524
Checking if a core if the primary/boot core used to be done with the macro
IS_PRIMARY_CORE().
Some platforms exposes configuration registers to change the primary core.
Replacing the macro IS_PRIMARY_CORE() by ArmPlatformIsPrimaryCore() allows
some flexibility in the way to check the primary core.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14344 6f19259b-4bc3-4df7-8a09-765794883524
ArmPlatformGetAdditionalSystemMemory() function wasn't used anywhere in UEFI.
This patch deletes it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14270 6f19259b-4bc3-4df7-8a09-765794883524
The MP ID Register is not enough to know the position of the core in the SoC.
We could have SoC with multi cluster of CPUs that do not contain the
same number of CPUs.
This function should return the position of the CPU in the SoC.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13770 6f19259b-4bc3-4df7-8a09-765794883524
The function only used in Secure Firmware used to be mixed with
the Non-Secure/Normal functions in ArmPlatformLib.
When the Secure Firmware was not required for some platforms (eg:
BeagleBoard), these functions were empty functions.
This new interface has been created to clean the ArmPlatformLib
interface between the SEC and PEI phases.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13260 6f19259b-4bc3-4df7-8a09-765794883524
- ArmPlatformNormalInitialize() has been renamed into ArmPlatformInitialize()
- Make the function be called at the early stage of the PEI phase as some
platforms require their interconnects or clocks to be initialize before any
access to Timers or UARTs.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13245 6f19259b-4bc3-4df7-8a09-765794883524
The GICD_IGROUPR0 is banked for each connected processor. It means the
Non-Secure bits for the PPIs (Private Peripheral Interrupts) must be
configured for every processor.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13135 6f19259b-4bc3-4df7-8a09-765794883524
The denomination 'Normal' was used to make reference to the 'Normal'
or 'Non Secure' or 'Non Trusted' world.
To avoid confusion, this prefix has been removed from PCDs to define
the normal world.
The PCDs explicitely related to the Secure/Trusted World continue to
have the 'Sec' prefix.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12416 6f19259b-4bc3-4df7-8a09-765794883524
When the BeagleBoard UEFI is started from a 1st (or 2nd stage) boot loader
it is possible there are still some pending IRQ.
Clean the interrupts before starting the BeagleBoard UEFI.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12034 6f19259b-4bc3-4df7-8a09-765794883524
To build the UEFI BeagleBoard firmware using this ARM framework either use ./build-next.sh
or directly call the EDK2 BaseTools with BeagleBoardPkg-next.dsc.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11998 6f19259b-4bc3-4df7-8a09-765794883524
ArmPkg - Supoprt for ARM specific things that can change as the architecture changes. Plus semihosting JTAG drivers.
EmbeddedPkg - Generic support for an embeddded platform. Including a light weight command line shell.
BeagleBoardPkg - Platform specifics for BeagleBoard. SD Card works, but USB has issues. Looks like a bug in the open source USB stack (Our internal stack works fine).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9518 6f19259b-4bc3-4df7-8a09-765794883524
Leif Lindholm
Ard Biesheuvel
Evan Lloyd
Ronald Cron
Olivier Martin
oliviermartin
andrewfish
hhtian
jljusten
AJFISH