Cache maintenance operations by set/way are only intended to be used
in the context of on/offlining a core, while it has been taken out of
the coherency domain. Any use intended to ensure that the contents of
the cache have made it to main memory is unreliable, since cacheline
migration and non-architected system caches may cause these contents
to linger elsewhere, without being visible in main memory once the
MMU and caches are disabled.
In KVM on Linux, there are horrid hacks in place to ensure that such
set/way operations are trapped, and replaced with a single by-VA
clean/invalidate of the entire guest VA space once the MMU state
changes, which can be costly, and is unnecessary if we manage the
caches a bit more carefully, and perform maintenance by virtual
address only.
So let's get rid of the call to ArmInvalidateDataCache () in the
PrePeiCore startup code, and instead, invalidate the UEFI memory
region by virtual address, which is the only memory region we will
be touching with the caches and MMU both disabled and enabled.
(This will lead to data corruption if data written with the MMU off
is shadowed by clean, stale cachelines that stick around when the
MMU is enabled again.)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This wasn't correctly testing for FD to be outside RAM,
when RAM base immediately follows the FD.
This is part of some cleanup for RPi4 in edk2-platform.
Signed-off-by: Andrei Warkentin <awarkentin@vmware.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The header files are used but missing in INF, which causes
warning message when building them.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PrePi does not use anything from IntelFrameworkModulePkg so remove
the reference from its [Packages] sections.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Avoid the need to preserve all memory exposed by PrePi indefinitely
by removing the 'feature' that exposes the PE/COFF and LZMA libraries
via special HOBs to other modules that may want to reuse the code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Call ProcessLibraryConstructorList () to invoke all library constructors
by hand rather than calling only some of them explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This commit adds support for storing initial timer value
logged at the beginning of firmware image execution.
This timer value is required for firmware basic boot performance
data record referenced by Firmware Performance Data Table (FPDT).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <Alxei.Fedorov@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to Section 2.3.6 of the "UEFI Specification 2.6 Errata A";
the primary CPU must be configured such that 'Timer access must be
provided to non-secure EL1 and EL0 by setting bits EL1PCTEN and
EL1PCEN in register CNTHCTL_EL2.'
This commit adds this missing set-up to the PrePi and PrePeiCore
modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Bring the RVCT version of the PrePi entry point code in line with the
GCC version, by using a relative rather than an absolute reference to
the mSystemMemoryEnd variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The global variable mSystemMemoryEnd is initialized by PrePi only if
it has not been initialized by ArmPlatformPeiBootAction(). This allows
platforms executing under, e.g., ARM Trusted Firmware to dynamically
reserve a window at the top of memory that will be used by the secure
firmware.
However, PrePi is a SEC module, and writing to a global variable
violates the SEC constraints, since SEC and PEI may execute from NOR
flash.
So instead, initialize mSystemMemoryEnd statically. This will ensure
it holds the correct value for all implementations where the value
is not overridden, but still allows it to be overridden during the
call to ArmPlatformPeiBootAction().
Note that this patch also fixes a latent bug on 32-bit platforms where
a value of mSystemMemoryEnd exceeding 4 GB would be truncated to 32-bits
rather than limited to (4 GB - 1)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to the ACPI 6.0/6.1 spec, the physical base address of GICC,
GICD, GICR and GIC ITS is 64-bit. So change the type of the various GIC
base address PCDs to 64-bit, and fix up all users.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
this bug was introduced by:
d2fa09a ArmPlatformPkg/PrePi: switch to ASM_FUNC() asm macro
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Annotate functions with ASM_FUNC() so that they are emitted into
separate sections.
While we're at it, replace some inefficient uses of LoadConstantToReg()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The RVCT .asm files include AsmMacroIoLib.h only for the definition of
LoadConstantToReg (), which makes it tedious to make change to that file
without the risk of making the RVCT assembler unhappy. So simply replace
LoadConstantToReg() with mov32, which does the right thing in all cases.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When combining UEFI firmware built from Tianocore with ARM Trusted
Firmware running in EL3, it is the responsibility of ATF that only
a single core enters the UEFI firmware in EL2, and the remaining cores
are released directly to the OS via PSCI SMC calls.
In this case, we don't need the MpCore flavor of PrePi or PrePeiCore,
but the UniCore flavor currently checks the CPU identification registers
directly, and refuses to proceed if the boot CPU is part of a MpCore
system.
So drop the ASSERT()'s that implement this check.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This retypes some stack base PCD as 64-bit, and fixes up a number of references
to 64-bit PCDs (including the retypes ones), to use the correct PcdGet64()
accessors. Note that, in the case of FixedPcdGet64, this does not actually
caused any problems, since that resolves to an immediate value. But the
generic PcdGetxx accessors should be typed according to the size of the PCD.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
[ard.biesheuvel: fixed up some instances in the 32-bit ARM code]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19787 6f19259b-4bc3-4df7-8a09-765794883524
Now that we dropped all ArmPlatformGlobalVariableLib dependencies,
there is no longer a need to allocate and clear out the global
variable region in the PrePi init code. So remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18992 6f19259b-4bc3-4df7-8a09-765794883524
This fixes the declaration and definition of mSystemMemoryEnd so that it
is correctly annotated as a non-function symbol. Also adds the ASM_PFX
prefix, which is empty on AARCH64 but should be included for correctness.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17860 6f19259b-4bc3-4df7-8a09-765794883524
This change allows to change the top of the System Memory that
was hardcoded by:
FixedPcdGet64 (PcdSystemMemoryBase) + FixedPcdGet64 (PcdSystemMemorySize)
It allows to add support when the Trusted Firmware reserves the
top of the System Memory as Trusted. The size of this region
might not be known in advance.
Note: The reason why the start of the System Memory has not been
made dynamic is because the early code calculates where to place
the stack from the top of the System Memory.
So there is no need to make the start of the System Memory a
dynamic value at the early stage of the boot phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17835 6f19259b-4bc3-4df7-8a09-765794883524
PcdFirmwareVersionString is defined in MdeModulePkg to be
either fixed or dynamic, but is restricted in ArmPlatformPkg
drivers to FixedPcd. Changed to remove the FixedPcd
restrictions to allow platforms to chose the correct type
in their DSC files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@hp.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17833 6f19259b-4bc3-4df7-8a09-765794883524
This changes the definition and a bunch of references to
gArmTokenSpaceGuid.PcdSystemMemoryBase and
gArmTokenSpaceGuid.PcdSystemMemorySize so they can be declared as dynamic PCDs
by the platform. Also, move the non-SEC call to
ArmPlatformInitializeSystemMemory() earlier, so a platform has a chance to set
these PCDs before they are first referenced.
The purpose is allowing dynamically instantiated virtual machines to declare
the system memory by passing a device tree.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16079 6f19259b-4bc3-4df7-8a09-765794883524
This PCD has been replaced by ArmPlatformIsPrimaryCore() function.
Althrough this PCD is still used in some occasions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16026 6f19259b-4bc3-4df7-8a09-765794883524
Replace tabs by spaces for indentation to comply to EDK2 coding standards.
Done in files with extension ".S", ".c", ".h", ".asm", ".dsc", ".inc", "*.inf",
"*.dec" or ".fdf" and located in ArmPkg, ArmPlatformPkg, EmbeddedPkg,
BeagleBoardPkg or Omap35xxPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15901 6f19259b-4bc3-4df7-8a09-765794883524
The InterruptId has a different width for GicV2 and GicV3 (respectively
10bit and 24bit).
The function prototype has been changed to return this value to make the
caller GIC architecture version independent. Otherwise, we would have need
to expose a different mask to allow the caller to retrieve this value from
the read register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15628 6f19259b-4bc3-4df7-8a09-765794883524
Some non-GCC toolchain might support the GNU assembly language.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15504 6f19259b-4bc3-4df7-8a09-765794883524
The stack size in the entrypoint (ie: $ARCH/ModuleEntryPoint.S) is calculated such as
StackSize = PrimaryCoreStack + (core_count - 1) * SecondaryCoreStack
While we were declaring the stacksize into the stack hob as:
StackSize = PrimaryCoreStack + (cluster * 8) * SecondaryCoreStack
If the number of cluster (ie: PcdClusterCount) were not defined correctly then
the stack size declaration were not correct.
It could cause stack corruption if the allocator allocates memory in this range.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15431 6f19259b-4bc3-4df7-8a09-765794883524
The commit on Fri Dec 6 2013: "ArmPlatformPkg/ArmPlatformStackLib:
Do not directly use PcdArmPrimaryCore" has made the function
ArmPlatformStackSet() overwrites the registers r6 and r7.
These registers are used by PrePi to store the MPIDR and the the base
of the system memory region used by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15167 6f19259b-4bc3-4df7-8a09-765794883524
The System Memory region might be out of the 32-bit memory space.
This change has been validated on the FVP AArch64 model using 4GB
of DRAM at 0x8_0000_0000:
- # System Memory (2GB)
- gArmTokenSpaceGuid.PcdSystemMemoryBase|0x80000000
- gArmTokenSpaceGuid.PcdSystemMemorySize|0x80000000
+ # System Memory (4GB)
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x800000000
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x100000000
EFI Shell and Linux kernel boot successfully.
Note: This change has not been validated on AArch32. I expect some
early assembly code to not work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15093 6f19259b-4bc3-4df7-8a09-765794883524
- Disable data cache on all cores.
- Do not clean caches as there might be junk in them, invalidate only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14527 6f19259b-4bc3-4df7-8a09-765794883524
The idea is to remove the PCD PcdGicPrimaryCoreId to make the port easier (and also to allow changing
the primary boot CPU without adding more platform specific code to UEFI).
There is a risk the mailboxes contain garbage at boot time. But it should be easy enough to clear the
mailboxes when starting UEFI to workaround this limitation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14477 6f19259b-4bc3-4df7-8a09-765794883524
This function allows platform to do any specific actions prior to
the start the PEI phase.
For instance, this function could be used by some platforms to initialize clocks that
are required at the early stage of the PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14347 6f19259b-4bc3-4df7-8a09-765794883524
Checking if a core if the primary/boot core used to be done with the macro
IS_PRIMARY_CORE().
Some platforms exposes configuration registers to change the primary core.
Replacing the macro IS_PRIMARY_CORE() by ArmPlatformIsPrimaryCore() allows
some flexibility in the way to check the primary core.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14344 6f19259b-4bc3-4df7-8a09-765794883524
The new functions are:
- ArmPlatformStackSet(IN UINTN StackBase, IN UINTN MpId, IN UINTN PrimaryStackSize, IN UINTN SecondaryStackSize);
- ArmPlatformStackSetPrimary(IN UINTN StackBase, IN UINTN MpId, IN UINTN PrimaryStackSize, IN UINTN SecondaryStackSize);
- ArmPlatformStackSetSecondary(IN UINTN StackBase, IN UINTN MpId, IN UINTN PrimaryStackSize, IN UINTN SecondaryStackSize);
The stack topology can be changed by implementing a new ArmPlatformStackLib
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13774 6f19259b-4bc3-4df7-8a09-765794883524
On ARM PLatforms, there is no standard way to know how many cores are
available on the platform.
This PCD is expected to contain this number.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13769 6f19259b-4bc3-4df7-8a09-765794883524
In case a DebugAgent library is supported for a specific debugger, we would
expect the exception be caught by DebugAgentLib.
The DebugAgentBaseLib exposes the cause of the exception to the user in the
Serial Terminal.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13766 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel
Andrei Warkentin
Pete Batard
Antoine Cœur
Michael D Kinney
Alexei Fedorov
Sami Mujawar
Dennis Chen
Michael Zimmermann
Leendert van Doorn
Evan Lloyd
Olivier Martin
Samer El-Haj-Mahmoud
Ronald Cron
Brendan Jackman
Harry Liebel
oliviermartin