NASM introduced FXSAVE / FXRSTOR support in commit 900fa5b26b8f ("NASM
0.98p3-hpa", 2002-04-30), which commit stands for the nasm-0.98p3-hpa
release.
NASM introduced FXSAVE64 / FXRSTOR64 support in commit 3a014348ca15
("insns: add FXSAVE64/FXRSTOR64, drop np prefix", 2010-07-07), which was
part of the "nasm-2.09" release.
Edk2 requires nasm-2.10 or later for use with the GCC toolchain family,
and nasm-2.12.01 or later for use with all other toolchain families.
Replace the binary encoding of the FXSAVE(64)/FXRSTOR(64) instructions
with mnemonics.
I verified that the "Ia32/SmiException.obj", "X64/SmiEntry.obj" and
"X64/SmiException.obj" files are rebuilt after this patch, without any
change in content.
This patch removes the last instructions encoded with DBs from
PiSmmCpuDxeSmm.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(1) SmmRelocationSemaphoreComplete32() runs in 32-bit mode, so wrap it in
a (BITS 32 ... BITS 64) bracket.
(2) SmmRelocationSemaphoreComplete32() currently compiles to:
> 000002AE C6050000000001 mov byte [dword 0x0],0x1
> 000002B5 FF2500000000 jmp dword [dword 0x0]
where the first instruction is patched with the contents of
"mRebasedFlag" (so that (*mRebasedFlag) is set to 1), and the second
instruction is patched with the address of
"mSmmRelocationOriginalAddress" (so that we jump to
"mSmmRelocationOriginalAddress").
In its current form the first instruction could not be patched with
PatchInstructionX86(), given that the operand to patch is not encoded
in the trailing bytes of the instruction. Therefore, adopt an
EAX-based version, inspired by both the IA32 and X64 variants of
SmmRelocationSemaphoreComplete():
> 000002AE 50 push eax
> 000002AF B800000000 mov eax,0x0
> 000002B4 C60001 mov byte [eax],0x1
> 000002B7 58 pop eax
> 000002B8 FF2500000000 jmp dword [dword 0x0]
Here both instructions can be patched with PatchInstructionX86(), and
the DBs can be replaced with native NASM syntax.
(3) Turn the "mRebasedFlagAddr32" and "mSmmRelocationOriginalAddressPtr32"
variables into markers that suit PatchInstructionX86().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmmInitStack" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmmInit.nasm".
The size of the patched source operand is (sizeof (UINTN)).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IA32 version of "SmmInit.nasm" does not need "gSmmJmpAddr" at all (its
PiSmmCpuSmmInitFixupAddress() variant doesn't do anything either). We can
simply use the NASM syntax for the following Mixed-Size Jump:
> jmp PROTECT_MODE_CS : dword @32bit
The generated object code for the instruction is unchanged:
> 00000182 66EA5A0000000800 jmp dword 0x8:0x5a
(The NASM manual explains that putting the DWORD prefix after the colon
":" reflects the intent better, since it is the offset that is a DWORD.
Thus, that's what I used. However, both syntaxes are interchangeable,
hence the ndisasm output.)
The X64 version of "SmmInit.nasm" appears to require "gSmmJmpAddr";
however that's accidental, not inherent:
- Bring LONG_MODE_CODE_SEGMENT from
"UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h" to "SmmInit.nasm" as
LONG_MODE_CS, same as PROTECT_MODE_CODE_SEGMENT was brought to the IA32
version as PROTECT_MODE_CS earlier.
- Apply the NASM-native Mixed-Size Jump syntax again, but jump to the
fixed zero offset in LONG_MODE_CS. This will produce no relocation
record at all. Add a label after the instruction.
- Modify PiSmmCpuSmmInitFixupAddress() to patch the jump target backwards
from the label. Because we modify the DWORD offset with a DWORD access,
the segment selector is unharmed in the instruction, and we need not set
it from PiCpuSmmEntry().
According to "objdump --reloc", the X64 version undergoes only the
following relocations, after this patch:
> RELOCATION RECORDS FOR [.text]:
> OFFSET TYPE VALUE
> 0000000000000095 R_X86_64_PC32 SmmInitHandler-0x0000000000000004
> 00000000000000e0 R_X86_64_PC32 mRebasedFlag-0x0000000000000004
> 00000000000000ea R_X86_64_PC32 mSmmRelocationOriginalAddress-0x0000000000000004
Therefore the patch does not regress
<https://bugzilla.tianocore.org/show_bug.cgi?id=849> ("Enable XCODE5 tool
chain for UefiCpuPkg with nasm source code").
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Like "gSmmCr4" in the previous patch, "gSmmCr0" is not only used for
machine code patching, but also as a means to communicate the initial CR0
value from SmmRelocateBases() to InitSmmS3ResumeState(). In other words,
the last four bytes of the "mov eax, Cr0Value" instruction's binary
representation are utilized as normal data too.
In order to get rid of the DB for "mov eax, Cr0Value", we have to split
both roles, patching and data flow. Introduce the "mSmmCr0" global (SMRAM)
variable for the data flow purpose. Rename the "gSmmCr0" variable to
"gPatchSmmCr0" so that its association with PatchInstructionX86() is clear
from the declaration, change its type to X86_ASSEMBLY_PATCH_LABEL, and
patch it with PatchInstructionX86(), to the value now contained in
"mSmmCr0".
This lets us remove the binary (DB) encoding of "mov eax, Cr0Value" in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Unlike "gSmmCr3" in the previous patch, "gSmmCr4" is not only used for
machine code patching, but also as a means to communicate the initial CR4
value from SmmRelocateBases() to InitSmmS3ResumeState(). In other words,
the last four bytes of the "mov eax, Cr4Value" instruction's binary
representation are utilized as normal data too.
In order to get rid of the DB for "mov eax, Cr4Value", we have to split
both roles, patching and data flow. Introduce the "mSmmCr4" global (SMRAM)
variable for the data flow purpose. Rename the "gSmmCr4" variable to
"gPatchSmmCr4" so that its association with PatchInstructionX86() is clear
from the declaration, change its type to X86_ASSEMBLY_PATCH_LABEL, and
patch it with PatchInstructionX86(), to the value now contained in
"mSmmCr4".
This lets us remove the binary (DB) encoding of "mov eax, Cr4Value" in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmmCr3" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmmInit.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(This patch is the 64-bit variant of commit e75ee97224,
"UefiCpuPkg/PiSmmCpuDxeSmm: remove unneeded DBs from IA32 SmmStartup()",
2018-01-31.)
The SmmStartup() function executes in SMM, which is very similar to real
mode. Add "BITS 16" before it and "BITS 64" after it (just before the
@LongMode label).
Remove the manual 0x66 operand-size override prefixes, for selecting
32-bit operands -- the sizes of our operands trigger NASM to insert the
prefixes automatically in almost every spot. The one place where we have
to add it back manually is the LGDT instruction. In the LGDT instruction
we also replace the binary 0x2E prefix with the normal NASM syntax for CS
segment override.
The stores to the Control Registers were always 32-bit wide; the source
code only used RAX as source operand because it generated the expected
object code (with NASM compiling the source as if in BITS 64). With BITS
16 added, we can use the actual register width in the source operands
(EAX).
This patch causes NASM to generate byte-identical object code (determined
by disassembling both the pre-patch and post-patch versions, and comparing
the listings), except:
> @@ -231,7 +231,7 @@
> 000001D2 6689D3 mov ebx,edx
> 000001D5 66B800000000 mov eax,0x0
> 000001DB 0F22D8 mov cr3,eax
> -000001DE 662E670F0155F6 o32 lgdt [cs:ebp-0xa]
> +000001DE 2E66670F0155F6 o32 lgdt [cs:ebp-0xa]
> 000001E5 66B800000000 mov eax,0x0
> 000001EB 80CC02 or ah,0x2
> 000001EE 0F22E0 mov cr4,eax
The only difference is the prefix list order, it changes from:
- 0x66, 0x2E, 0x67
to
- 0x2E, 0x66, 0x67
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"mXdSupported" is a global BOOLEAN variable, initialized to TRUE. The
CheckFeatureSupported() function is executed on all processors (not
concurrently though), called from SmmInitHandler(). If XD support is found
to be missing on any CPU, then "mXdSupported" is set to FALSE, and further
processors omit the check. Afterwards, "mXdSupported" is read by several
assembly and C code locations.
The tricky part is *where* "mXdSupported" is allocated (defined):
- Before commit 717fb60443 ("UefiCpuPkg/PiSmmCpuDxeSmm: Add paging
protection.", 2016-11-17), it used to be a normal global variable,
defined (allocated) in "SmmProfile.c".
- With said commit, we moved the definition (allocation) of "mXdSupported"
into "SmiEntry.nasm". The variable was defined over the last byte of a
"mov al, 1" instruction, so that setting it to FALSE in
CheckFeatureSupported() would patch the instruction to "mov al, 0". The
subsequent conditional jump would change behavior, plus all further read
references to "mXdSupported" (in C and assembly code) would read back
the source (imm8) operand of the patched MOV instruction as data.
This trick required that the MOV instruction be encoded with DB.
In order to get rid of the DB, we have to split both roles: we need a
label for the code patching, and "mXdSupported" has to be defined
(allocated) independently of the code patching. Of course, their values
must always remain in sync.
(1) Reinstate the "mXdSupported" definition and initialization in
"SmmProfile.c" from before commit 717fb60443. Change the assembly
language definition ("global") to a declaration ("extern").
(2) Define the "gPatchXdSupported" label (type X86_ASSEMBLY_PATCH_LABEL)
in "SmiEntry.nasm", and add the C-language declaration to
"SmmProfileInternal.h". Replace the DB with the MOV mnemonic (keeping
the imm8 source operand with value 1).
(3) In CheckFeatureSupported(), whenever "mXdSupported" is set to FALSE,
patch the assembly code in sync, with PatchInstructionX86().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmiCr3" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmiStack" so that its association with
PatchInstructionX86() is clear from the declaration. Also change its type
to X86_ASSEMBLY_PATCH_LABEL.
Unlike "gSmbase" in the previous patch, "gSmiStack"'s patched value is
also de-referenced by C code (in other words, it is read back after
patching): the InstallSmiHandler() function stores "CpuIndex" to the given
CPU's SMI stack through "gSmiStack". Introduce the local variable
"CpuSmiStack" in InstallSmiHandler() for calculating the stack location
separately, then use this variable for both patching into the assembly
code, and for storing "CpuIndex" through it.
It's assumed that "volatile" stood in the declaration of "gSmiStack"
because we used to read "gSmiStack" back for de-referencing; with that use
gone, we can remove "volatile" too. (Note that the *target* of the pointer
was never volatile-qualified.)
Finally, replace the binary (DB) encoding of "mov esp, imm32" in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Rename the variable to "gPatchSmbase" so that its association with
PatchInstructionX86() is clear from the declaration, change its type to
X86_ASSEMBLY_PATCH_LABEL, and patch it with PatchInstructionX86(). This
lets us remove the binary (DB) encoding of some instructions in
"SmiEntry.nasm".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
> v2:
> Reduce the number of page to update/restore from 3 to 2 because DF
> has no effect in this issue.
The infinite loop is caused by the memory instruction, such as
"rep mov", operating on memory block crossing boundary of NON-PRESENT
pages. Because the address triggering page fault set in CR2 will be in
the first page, SmmProfilePFHandler() will only change the first page
into PRESENT. The page following will be still in NON-PRESENT status.
Since SmmProfilePFHandler() will setup single-step trap for the
instruction causing #PF, when the handler returns back to the
instruction and re-execute it, both #DB and #PF will be triggered
because the instruction wants to access both first and second page
but only first page is PRESENT.
Normally #DB exception will be handled first and its handler will
change first page back to NON-PRESENT status. Then #PF is handled
and its handler will change first page to PRESENT status again and
setup another single-step for the instruction triggering #PF. Then
the whole system falls into an infinite loop and the memory operation
will never move on.
This patch fix above situation by always changing 2 pages to PRESENT
status instead of just 1 page. Those 2 pages include the page causing
#PF and the page after it.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
SMM emulation under both KVM and QEMU (TCG) crashes the guest when the
"jz" branch, added in commit d4d87596c1 ("UefiCpuPkg/PiSmmCpuDxeSmm:
Enable NXE if it's supported", 2018-01-18), is taken.
Rework the propagation of CPUID.80000001H:EDX.NX [bit 20] to IA32_EFER.NXE
[bit 11] so that no code is executed conditionally.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: http://mid.mail-archive.com/d6fff558-6c4f-9ca6-74a7-e7cd9d007276@redhat.com
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: XD -> NX code comment updates from Ray]
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: mark QEMU/TCG as well in the commit message]
The SmmStartup() executes in SMM, which is very similar to real mode. Add
"BITS 16" before it and "BITS 32" after it (just before the @32bit label).
Remove the manual 0x66 operand-size override prefixes, for selecting
32-bit operands -- the sizes of our operands trigger NASM to insert the
prefixes automatically in almost every spot. The one place where we have
to add it back manually is the LGDT instruction. (The 0x67 address-size
override prefix is also auto-generated.)
This patch causes NASM to generate byte-identical object code (determined
by disassembling both the pre-patch and post-patch versions, and comparing
the listings), except:
> @@ -158,7 +158,7 @@
> 00000142 6689D3 mov ebx,edx
> 00000145 66B800000000 mov eax,0x0
> 0000014B 0F22D8 mov cr3,eax
> -0000014E 67662E0F0155F6 o32 lgdt [cs:ebp-0xa]
> +0000014E 2E66670F0155F6 o32 lgdt [cs:ebp-0xa]
> 00000155 66B800000000 mov eax,0x0
> 0000015B 0F22E0 mov cr4,eax
> 0000015E 66B9800000C0 mov ecx,0xc0000080
The only difference is the prefix list order, it changes from:
- 0x67, 0x66, 0x2E
to
- 0x2E, 0x66, 0x67
(0x2E is "CS segment override").
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=866
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The gSmmCr3, gSmmCr4, gSmmCr0 and gSmmJmpAddr global variables are used
for patching assembly instructions, thus we can't yet remove the DB
encodings for those instructions. At least we should add the intended
meanings in comments.
This patch only changes comments.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: adapt commit msg to ongoing PatchAssembly discussion]
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiBootServicesCode, EfiConventionalMemory, the BIOS will hang at a page
fault exception triggered by PiSmmCpuDxeSmm.
The root cause is that PiSmmCpuDxeSmm will access default SMM RAM starting
at 0x30000 which is marked as non-executable, but NX feature was not
enabled during SMM initialization. Accessing memory which has invalid
attributes set will cause page fault exception. This patch fixes it by
checking NX capability in cpuid and enable NXE in EFER MSR if it's
available.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=849
In V2, use "mov rax, strict qword 0" to replace the hard code db.
1. Use lea instruction to get the address instead of mov instruction.
2. Use the dummy address as jmp destination, and add the logic to fix up
the address to the absolute address at boot time.
3. On MpFuncs.nasm, use ExchangeInfo to record InitializeFloatingPointUnits.
This way is same to MpInitLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
AllocateCodePages() is used to allocate buffer for IDT range,
the code pages will be set to RO in SetMemMapAttributes(),
then the code to set IDT range to RO in PatchGdtIdtMap() is
redundant and could be removed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When StackGuard is enabled on IA32, the #double fault exception
is reported instead of #page fault.
This issue does not exist on X64, or IA32 without StackGuard.
The fix at e4435f710c was incomplete.
It is because AllocateCodePages() is used to allocate buffer for
GDT and TSS, the code pages will be set to RO in SetMemMapAttributes().
But IA32 Stack Guard need use task switch to switch stack that need
write GDT and TSS, so AllocateCodePages() could not be used.
This patch uses AllocatePages() instead of AllocateCodePages() to
allocate buffer for GDT and TSS if StackGuard is enabled on IA32.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
SMM profile and static paging could not be enabled at the same time,
this patch is to add check and comments to make sure it.
Similar comments are also added for the case of static paging and
heap guard for SMM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Only DumpCpuContext in error case, otherwise there will be too many
debug messages from DumpCpuContext() when SmmProfile feature is enabled
by setting PcdCpuSmmProfileEnable to TRUE. Those debug messages are not
needed for SmmProfile feature as it will record those information to
buffer for further dump.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Heap guard makes use of paging mechanism to implement its functionality. But
there's no protocol or library available to change page attribute in SMM mode.
A new protocol gEdkiiSmmMemoryAttributeProtocolGuid is introduced to make it
happen. This protocol provide three interfaces
struct _EDKII_SMM_MEMORY_ATTRIBUTE_PROTOCOL {
EDKII_SMM_GET_MEMORY_ATTRIBUTES GetMemoryAttributes;
EDKII_SMM_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
EDKII_SMM_CLEAR_MEMORY_ATTRIBUTES ClearMemoryAttributes;
};
Since heap guard feature need to update page attributes. The page table
should not set to be read-only if heap guard feature is enabled for SMM
mode. Otherwise this feature cannot work.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The mechanism behind is the same as NULL pointer detection enabled in EDK-II
core. SMM has its own page table and we have to disable page 0 again in SMM
mode.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Ayellet Wolman <ayellet.wolman@intel.com>
Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current code logic not check the pointer before use it. This may
has potential issue, this patch add code to check it.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V2:
Change function parameter to avoid touch global info in function.
Enhance function name, make it more user friendly
V1:
Refine code to avoid duplicate code to set processor register.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In S3 resume path, current implementation do 2 separate INIT-SIPI-SIPI,
this is not necessary. This change combine these 2 INIT-SIPI-SIPI to 1
and add CpuPause between them.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Originally (before 714c260301),
mPhysicalAddressBits was only defined in X64 PageTbl.c, after
714c260301, mPhysicalAddressBits is
also defined in Ia32 PageTbl.c, then mPhysicalAddressBits is used in
ConvertMemoryPageAttributes() for address check.
This patch is to centralize mPhysicalAddressBits definition to
PiSmmCpuDxeSmm.c from Ia32 and X64 PageTbl.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=624 reports
memory protection crash in PiSmmCpuDxeSmm, Ia32 build with
RAM above 4GB (of which 2GB are placed in 64-bit address).
It is because UEFI builds identity mapping page tables,
>4G address is not supported at Ia32 build.
This patch is to get the PhysicalAddressBits that is used
to build in PageTbl.c(Ia32/X64), and use it to check whether
the address is supported or not in ConvertMemoryPageAttributes().
With this patch, the debug messages will be like below.
UefiMemory protection: 0x0 - 0x9F000 Success
UefiMemory protection: 0x100000 - 0x807000 Success
UefiMemory protection: 0x808000 - 0x810000 Success
UefiMemory protection: 0x818000 - 0x820000 Success
UefiMemory protection: 0x1510000 - 0x7B798000 Success
UefiMemory protection: 0x7B79B000 - 0x7E538000 Success
UefiMemory protection: 0x7E539000 - 0x7E545000 Success
UefiMemory protection: 0x7E55A000 - 0x7E61F000 Success
UefiMemory protection: 0x7E62B000 - 0x7F6AB000 Success
UefiMemory protection: 0x7F703000 - 0x7F70B000 Success
UefiMemory protection: 0x7F70F000 - 0x7F778000 Success
UefiMemory protection: 0x100000000 - 0x180000000 Unsupported
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Originally-suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=674
Add CPUID check to see if the CPU supports the Machine
Check Architecture before accessing the Machine Check
Architecture related MSRs.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=555
Add JMP instruction in SmiEntry.S file that is missing. This
updates SmiEntry.S to match the logic in SmiEntry.asm and
SmiEntry.nasm.
The default BUILDRULEORDER has .nasm higher priority than
.asm or .S, so this issue was not seen with MSFT or GCC
tool chain families. The XCODE5 tool chain overrides the
BUILDRULEORDER with .S higher than .nasm, so this issue
was only seen when using XCODE5 tool chain when IA32 SMM
is enabled.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If PcdCpuHotPlugSupport is TRUE, gSmst->NumberOfCpus will be the
PcdCpuMaxLogicalProcessorNumber. If gSmst->SmmStartupThisAp() is invoked for
those un-existed processors, ASSERT() happened in ConfigSmmCodeAccessCheck().
This fix is to check if ProcessorId is valid before invoke
gSmst->SmmStartupThisAp() in ConfigSmmCodeAccessCheck() and to check if
ProcessorId is valid in InternalSmmStartupThisAp() to avoid unexpected DEBUG
error message displayed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
SMM BSP's *busy* state should be acquired. We could use AcquireSpinLock()
instead of AcquireSpinLockOrFail().
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Consuming PeCoffSerachImageBase() from PeCoffGetEntrypointLib and consuming
DumpCpuContext() from CpuExceptionHandlerLib to replace its own implementation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
SmmProfile feature required to protect all SMM ranges by structure
mProtectionMemRangeTemplate. This update is to add additonal save SMM ranges
into mProtectionMemRangeTemplate besides the range specified by
mCpuHotPlugData.SmrrBase/mCpuHotPlugData.SmrrSiz.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Internal function IsInSmmRanges() is added t check SMM range by saved SMM ranges
beside by mCpuHotPlugData.SmrrBase/mCpuHotPlugData.SmrrSiz.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The current CPU_REGISTER_TABLE_ENTRY structure only defined UINT32 Index to
indicate MSR/MMIO address. It's ok for MSR because MSR address is UINT32 type
actually. But for MMIO address, UINT32 limits MMIO address exceeds 4GB.
This update on CPU_REGISTER_TABLE_ENTRY is to add additional UINT32 field
HighIndex to indicate the high 32bit MMIO address and original Index still
indicate the low 32bit MMIO address.
This update makes use of original padding space between ValidBitLength and
Value to add HighIndex.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Needn't to copy register table if AllocatedSize is 0.
v4:
Fix potential uninitialized variable issue.
v5:
Set DestinationRegisterTableList[Index].RegisterTableEntry before
RegisterTableEntry is updated.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Current RegisterTableEntry filed in CPU_REGISTER_TABLE is one pointer to
CPU_REGISTER_TABLE_ENTRY. If CPU register table wants to be passed from 32bit
PEI to x64 DXE/SMM, x64 DXE/SMM cannot get the correct RegisterTableEntry.
This update is to update RegisterTableEntry type to EFI_PHYSICAL_ADDRESS and
make RegisterTableEntry is fixed length.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The commit is a follow-up of commit 8491e30.
In file MpService.c line 786:
Pte[Index] = (UINT64)((UINTN)PageTable + EFI_PAGE_SIZE * (Index + 1)) |
mAddressEncMask ...
(Where PageTable is of type VOID*, Index is of type UINTN, mAddressEncMask
is of type UINT64 and Pte[Index] is of type UINT64.)
Since in this case, the code logic ensures that the expression will not
exceed the range of UINTN, the commit will remove the explicit type cast
'(UINT64)'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Laszlo Ersek
Star Zeng
Jian J Wang
Liming Gao
Eric Dong
Michael D Kinney
Jeff Fan
Hao Wu