Currently, the PE/COFF image memory protection code uses the same code
paths for protecting and unprotecting an image. This is strange, since
unprotecting an image involves a single call into the CPU arch protocol
to clear the permission attributes of the entire range, and there is no
need to parse the PE/COFF headers again.
So let's store the ImageRecord entries in a linked list, so we can find
it again at unprotect time, and simply clear the permissions.
Note that this fixes a DEBUG hang on an ASSERT() that occurs when the
PE/COFF image fails to load, which causes UnprotectUefiImage() to be
invoked before the image is fully loaded.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The BGRT table has an 8 byte field for the memory address of the image
data, and yet the driver explicitly allocates below 4 GB. This results
in an ASSERT() on systems that do not have any memory below 4 GB to begin
with.
Since neither the PI, the UEFI or the ACPI spec contain any mention of
why this data should reside below 4 GB, replace the allocation call
with an ordinary AllocatePages() call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Invocations of EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() may
result in a crash when the value of PcdAcpiExposedTableVersions does
not include EFI_ACPI_TABLE_VERSION_1_0B.
The reason is that EFI_ACPI_TABLE_PROTOCOL::InstallAcpiTable() will
only populate the Rsdt1/Rsdt3 pointers when EFI_ACPI_TABLE_VERSION_1_0B
is set, whereas EFI_ACPI_TABLE_PROTOCOL::UninstallAcpiTable() will
invoke PublishTables with EFI_ACPI_TABLE_VERSION_1_0B alawys set,
resulting in a NULL pointer dereference of the Rsdt1/Rsdt3 pointers.
So take PcdAcpiExposedTableVersions into account for UninstallAcpiTable
as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=388
Add -NR (no-reset) option support, once the option is specified,
no reset will be trigger for the capsule with flag
CAPSULE_FLAGS_PERSIST_ACROSS_RESET and no CAPSULE_FLAGS_INITIATE_RESET.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Xiaofeng Wang <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
For async commands, the buffer allocated for Prp list is
not getting freed, which will cause memory leak for async
read write command. For example testing async command flow
with custom application to send multiple read write commands
were resulting in decrease of available memory page in memmap,
which eventually resulted in system hang. Hence freeing
AsyncRequest->MapData, AsyncRequest->MapMeta, AsyncRequest->MapPrpList and
AsyncRequest->PrpListHost when async command is completed.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Suman Prakash <suman.p@samsung.com.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
UEFI executables that consist of a single read+write+exec PE/COFF section
trigger this message, but such a binary layout isn't actually an error.
The image can be launched alright, only image protection cannot be applied
to it fully.
One example that elicits the message is (some) Linux kernels (with the EFI
stub of course).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RamDiskDxe installs the RamDiskAcpiCheck() Ready To Boot callback
function. If EFI_ACPI_TABLE_PROTOCOL and/or EFI_ACPI_SDT_PROTOCOL are not
found, then informational messages are logged, and the RAM disks are not
published to the (nonexistent) NFIT table.
The logic is fine, but the info messages are not concatenated correctly
from multiple string literals -- the second parts are passed as (unused)
arguments to DEBUG(). Fix the typos.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Move the definition of variable "mEsrtTable" and
"mIsVirtualAddrConverted" to DxeCapsuleLib.c.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: jiewen.yao@intel.com
When attempting to perform page allocations using AllocateAddress, we
fail to check whether the entire region is free before splitting the
region. This may lead to memory being leaked further into the routine,
when it turns out that one of the memory map entries intersected by the
region is already occupied. In this case, prior conversions are not rolled
back.
For instance, starting from this situation
0x000040000000-0x00004007ffff [ConventionalMemory ]
0x000040080000-0x00004009ffff [Boot Data ]
0x0000400a0000-0x000047ffffff [ConventionalMemory ]
a failed EfiLoaderData allocation @ 0x40000000 that covers the BootData
region will fail, but leave the first part of the allocation converted,
so we end up with
0x000040000000-0x00004007ffff [Loader Data ]
0x000040080000-0x00004009ffff [Boot Data ]
0x0000400a0000-0x000047ffffff [ConventionalMemory ]
even though the AllocatePages() call returned an error.
So let's check beforehand that AllocateAddress allocations are covered
by a single memory map entry, so that it either succeeds or fails
completely, rather than leaking allocations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
198a46d768 improved the DSDT and X_DSDT
fields mutual exclusion by checking FADT revision, but that breaks
some OS that has assumption to only consume X_DSDT field even the
DSDT address is < 4G.
To have better compatibility, this patch is to update the code to not
make FADT.{DSDT,X_DSDT} mutual exclusion, but always set both DSDT and
X_DSDT fields in the FADT when the DSDT address is < 4G.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Jeff Fan <jeff.fan@intel.com>
The original logic assumes GOP hande is son of PCI handle but it
is not always true.
Below wordings are from UEFI Spec:
If a graphics device supports multiple frame buffers, then
handles for the frame buffers must be created first, and then the
handles for the video output devices can be created as children of
the frame buffer handles.
So the GOP handle could be grandson of the PCI handle.
EfiBootManagerGetGopDevicePath(VideoController) is used to fix
this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
v2: Handle error case in SockCreateChild and fix typo issue
when we destroy the socket Sock and its associated
protocol control block, we need to first close the
parent protocol, then remove the protocol from childHandle
and last to free any data structures that allocated in
CreateChild. But currently, we free the socket data
(Socket ConfigureState) before removing the protocol
form the childhandle. So if the up layer want to send the
tcp reset packet in it's driver binding stop function, it will failed.
The IpInstance destroy state is redundant and may cause
ip transmit failed if up layer want to send ip packet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Http boot on X64 platform is faild, this is caused by the incorrect
type conversion when getting port number from Url.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
v2:
* Add the check in Ip4Config2SetDefaultIf to avoid the DHCP configuration
case.
Ip4config2 doesn't check the validity of Ip/Netmask pair, which
leads to the invalid combination of Ip and Netmask setting.
This patch is to resolve the issue.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
The previous patch has problem on handling capsule
request at runtime.
This patch fixed the issue.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Current PI spec has no clear description about whether the
SkuId could be changed multiple times or not during one boot.
If the SkuId could be changed multiple times during one boot,
different modules may get inconsistent PCD values.
And DynamicHii PCD maps to UEFI variable, once one DynamicHii
PCD(UEFI variable) is set for one SkuId, then the PCD value
will be always from UEFI variable but not PCD database, even
the SkuId is set to other value.
This patch is to update PCD drivers to allow SkuId to be
changed only once during one boot.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=370
Use GLOBAL_REMOVE_IF_UNREFERENCED for some memory profile global variables,
then their symbols could be removed when memory profile is disabled.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=370
Use GLOBAL_REMOVE_IF_UNREFERENCED for some SMRAM profile global variables,
then their symbols could be removed when SMRAM profile is disabled.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
At worst case, OCR register may always not set BIT31. It will cause
original code enter to dead loop. Adding a break for such case.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The reason is that we observe that a platform may use same Handler
for different context.
In order to support Unregister such handler, we have to input
context information as well.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The reason is that we observe that a platform may use same Handler
for different context.
In order to support Unregister such handler, we have to input
context information as well.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The commit refines the comment description for EFI_PRINT2S_PROTOCOL
service ASCII_VALUE_TO_STRING_S.
This service will not ASSERT when the input/output parameter 'Buffer' is
not aligned on a 16-bit boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The commit refines the comment description for PrintLib API
AsciiValueToStringS.
This API will not ASSERT when the input/output parameter 'Buffer' is not
aligned on a 16-bit boundary.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ACPI specification, up to and including revision 5.1 Errata A, allows
the DSDT and X_DSDT fields to be both set in the FADT. (Obviously, this
only makes sense if the DSDT address is representable in 4 bytes.)
Starting with 5.1 Errata B, specifically for Mantis 1393
<https://mantis.uefi.org/mantis/view.php?id=1393>, the spec requires at
most one of DSDT and X_DSDT to be set to a nonzero value.
MdeModulePkg/AcpiTableDxe handles this mutual exclusion somewhat
inconsistently.
- If the caller of EFI_ACPI_TABLE_PROTOCOL.InstallAcpiTable() installs the
tables in "DSDT, FADT" order, then we enforce the exclusion between the
DSDT and X_DSDT fields:
DSDT under 4GB FADT.DSDT FADT.X_DSDT [VARIANT B]
-------------- --------- -----------
yes set clear
no clear set
This behavior conforms to 5.1 Errata B. (And it's not required by
earlier versions of the spec.)
- If the caller passes in the tables in "FADT, DSDT" relative order, then
we do not enforce the exclusion:
DSDT under 4GB FADT.DSDT FADT.X_DSDT [VARIANT A]
-------------- --------- -----------
yes set set
no clear set
This satisfies 5.1 Errata A and earlier, but breaks 5.1 Errata B and
later.
Unify the handling of both relative orders. In particular, check the major
and minor version numbers in the FADT. If the FADT version is strictly
before 5.1, then implement [VARIANT A]. If the FADT version is equal to or
larger than 5.1, then implement [VARIANT B].
We make three observations:
- We can't check the FADT table version precisely against "5.1 Errata B";
erratum levels are not captured in the table. We err in the safe
direction, namely we enforce the exclusion for "5.1" and "5.1 Errata A".
- The same applies to "6.0" versus "6.0 Errata A". Because we cannot
distinguish these two, we consider "6.0" to be "equal to or larger than
5.1", and apply [VARIANT B], enforcing the exclusion.
- While a blanket [VARIANT B] would be simpler, there is a significant
benefit to [VARIANT A], under the spec versions that permit it:
compatibility with a wider range of OSPMs (typically, older ones).
For example, Igor reported about a "DELL R430 system with rev4 FADT
where DSDT and X_DSDT are pointing to the same address". Michael also
reported about several systems that exhibit the same.
Regression tested with the following KVM guests (QEMU built at
ata0def594286d, "Merge remote-tracking branch
'remotes/bonzini/tags/for-upstream' into staging", 2017-01-30):
- OVMF: boot and S3 suspend/resume
- Ia32, Q35, SMM
- Fedlet 20141209
- Ia32X64, Q35, SMM
- Fedora 22
- Windows 7
- Windows 8.1
- Windows 10
- Windows Server 2008 R2
- Windows Server 2012 R2
- Windows Server 2016 Tech Preview 4
- X64, I440FX, no SMM
- Fedora 24
- RHEL-6.7
- RHEL-7.2-ish
- ArmVirtQemu: boot test with virtio-gpu
- AARCH64
- Fedora 24
- RHELSA-7.3
- openSUSE Tumbleweed (4.8.4-based)
This change is connected to ASWG ticket
<https://mantis.uefi.org/mantis/view.php?id=1757>, which is now
closed/fixed.
Cc: Al Stone <ahs3@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Tsirkin <mtsirkin@redhat.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Phil Dennis-Jordan <phil@philjordan.eu>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch incurs no functional changes, it just removes some whitespace,
and also makes sure we always assign
AcpiTableInstance->Fadt3->Dsdt
first, and
AcpiTableInstance->Fadt3->XDsdt
second. The goal is to separate the syntactic changes from the functional
changes implemented by the next patch.
Cc: Al Stone <ahs3@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Michael Tsirkin <mtsirkin@redhat.com>
Cc: Phil Dennis-Jordan <phil@philjordan.eu>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Architectures such as AArch64 may run the OS with 16 KB or 64 KB sized
pages, and for this reason, the UEFI spec mandates a minimal allocation
granularity of 64 KB for regions that may require different memory
attributes at OS runtime.
So make PeiCore's implementation of AllocatePages () take this into
account as well.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the local definitions for the default and runtime page allocation
granularity macros, and switch to the new MdePkg versions.
Note that this replaces a reference to the 'default' version with the
more correct 'runtime' version, but this matters little in practice.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove the local definitions for the default and runtime page allocation
granularity macros, and switch to the new MdePkg versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
For pointer subtraction, the result is of type "ptrdiff_t". According to
the C11 standard (Committee Draft - April 12, 2011):
"When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object; the
result is the difference of the subscripts of the two array elements. The
size of the result is implementation-defined, and its type (a signed
integer type) is ptrdiff_t defined in the <stddef.h> header. If the result
is not representable in an object of that type, the behavior is
undefined."
In our codes, there are cases that the pointer subtraction is not
performed by pointers to elements of the same array object. This might
lead to potential issues, since the behavior is undefined according to C11
standard.
Also, since the size of type "ptrdiff_t" is implementation-defined. Some
static code checkers may warn that the pointer subtraction might underflow
first and then being cast to a bigger size. For example:
UINT8 *Ptr1, *Ptr2;
UINTN PtrDiff;
...
PtrDiff = (UINTN) (Ptr1 - Ptr2);
The commit will refine the pointer subtraction expressions by casting each
pointer to UINTN first and then perform the subtraction:
PtrDiff = (UINTN) Ptr1 - (UINTN) Ptr2;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure
if present and not empty. by following TCG PC Client PFP 00.49
Previous patch for PCR[7] DBT part is overrode.
dc9bd6ed28
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
To handle the deprecation of PrintLib APIs UnicodeValueToString and
AsciiValueToString by subsequent commits, the commit refines the logic for
the implemetation of the UnicodeValueToString and AsciiValueToString
services in EFI_PRINT2_PROTOCOL.
When the macro DISABLE_NEW_DEPRECATED_INTERFACES is defined (indicating
the deprecation of the PrintLib APIs), the above two services will ASSERT
and will return zero to reflect not being supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
It is the follow up of commits 51f0ceb..9e32e97 to replace
AsciiValueToString/UnicodeValueToString with
AsciiValueToStringS/UnicodeValueToStringS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
This module updates the under-4GB page tables configured by the S3-Resume
code in UefiCpuPkg/Universal/Acpi/S3Resume2Pei. The mask is saved at module
start (ScriptExecute.c), and applied when tables are expanded on-demand by
page-faults above 4GB's (SetIdtEntry.c).
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when 4GB tables are created (UefiCapsule.c), and when
the tables are expanded on-demand by page-faults above 4GB's (X64Entry.c).
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when creating page tables.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This implements a DXE memory protection policy that ensures that regions
that don't require executable permissions are mapped with the non-exec
attribute set.
First of all, it iterates over all entries in the UEFI memory map, and
removes executable permissions according to the configured DXE memory
protection policy, as recorded in PcdDxeNxMemoryProtectionPolicy.
Secondly, it sets or clears the non-executable attribute when allocating
or freeing pages, both for page based or pool based allocations.
Note that this complements the image protection facility, which applies
strict permissions to BootServicesCode/RuntimeServicesCode regions when
the section alignment allows it. The memory protection configured by this
patch operates on non-code regions only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Define a new fixed/patchable PCD that sets the DXE memory protection
policy: its primary use is to define which memory types should have
their executable permissions removed. Combined with the image protection
policy, this can be used to implement a strict W^X policy, i.e.. a policy
where no regions exist that are both executable and writable at the same
time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In preparation of adding memory permission attribute management to
the pool allocator, split off the locking of the pool metadata into
a separate lock. This is an improvement in itself, given that pool
allocations can only interfere with the page allocation bookkeeping
if pool pages are allocated or released. But it is also required to
ensure that the permission attribute management does not deadlock,
given that it may trigger page table splits leading to additional
page tables being allocated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EBC driver emits thunks for native to EBC calls, which are short
instructions sequences that bridge the gap between the native execution
environment and the EBC virtual machine.
Since these thunks are allocated using MemoryAllocationLib::AllocatePool(),
they are emitted into EfiBootServicesData regions, which does not reflect
the nature of these thunks accurately, and interferes with strict memory
protection policies that map data regions non-executable.
So instead, create a new helper EbcAllocatePoolForThunk() that invokes the
AllocatePool() boot service directly to allocate EfiBootServicesCode pool
memory explicitly, and wire up this helper for the various architecture
specific thunk generation routines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ensure that any memory allocated for PE/COFF images is identifiable as
a boot services code region, so that we know it requires its executable
permissions to be preserved when we tighten mapping permissions later on.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1. Make function comments align with the function.
2. Change the FILE_GUID value in SmmSmiHandlerProfileLib.inf
since it is duplicated with the FILE_GUID value in
SmiHandlerProfileLibNull.inf
3. Add missing PCD PROMPT&HELP string to uni file.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Use the API EfiBootManagerDeleteLoadOptionVariable in UefiBootManagerLib to
replace the same logic in function Var_DelBootOption/Var_DelDriverOption.
This can make code clean and prevent potential bugs.
https://bugzilla.tianocore.org/show_bug.cgi?id=391
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Having duplicated DNS server IPs specified is not an ideal
configuration, but not an error condition. This patch is to
remove the duplicated DNS address check to allow the same DNS
address setting in SetData().
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Subramanian Sriram <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Instead of assuming that a PE/COFF section of type EFI_IMAGE_SCN_CNT_CODE
can always be mapped read-only, classify a section as a code section only
if it has the executable attribute set and the writable attribute cleared.
This adheres more closely to the PE/COFF spec, and avoids issues with
Linux OS loaders that may consist of a single read/write/execute section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update the interface name from ethA ethB to
eth10, eth11 etc if port number more than 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Sriram Subramanian <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
This app uses SMM communication to get SMI handler profile
from SMM core.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
1) SmmCore maintains the root SMI handler and NULL SMI handler
database.
2) SmmCore consumes PcdSmiHandlerProfilePropertyMask to decide
if SmmCore need support SMI handler profile.
If SMI handler profile is supported, the SmmCore installs
SMI handler profile protocol and SMI handler profile
communication handler.
3) SMI handler profile protocol will record the hardware SMI
handler profile registered by SmmChildDispatcher.
4) SMI handler profile communication handler will return all
SMI handler profile info (NULL SMI handler, GUID SMI handler,
and hardware SMI handler)
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This instance should be linked by SmmChildDispatcher
if SMI handler profile feature is enabled.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This PCD is linked by PiSmmCore to control if it enables
SMI handler profile feature.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This header file defines:
1) An SMI handler profile protocol. So that SmmChildDispatch
module can register the hardware SMI handler information.
2) The SMI handler profile communication buffer. So that
a shell application can use SMM communication to get the
SMI handler profile info.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
If the UEFI image is page aligned, the image code section is set to read
only and the image data section is set to non-executable.
1) This policy is applied for all UEFI image including boot service driver,
runtime driver or application.
2) This policy is applied only if the UEFI image meets the page alignment
requirement.
3) This policy is applied only if the Source UEFI image matches the
PcdImageProtectionPolicy definition.
4) This policy is not applied to the non-PE image region.
The DxeCore calls CpuArchProtocol->SetMemoryAttributes() to protect
the image. If the CpuArch protocol is not installed yet, the DxeCore
enqueues the protection request. Once the CpuArch is installed, the
DxeCore dequeues the protection request and applies policy.
Once the image is unloaded, the protection is removed automatically.
The UEFI runtime image protection is teared down at ExitBootServices(),
the runtime image code relocation need write code segment at
SetVirtualAddressMap(). We cannot assume OS/Loader has taken over
page table at that time.
NOTE: It is per-requisite that code section and data section
should not be not merged. That is same criteria for SMM/runtime driver.
We are not able to detect during BIOS boot, because
we can only get LINK warning below:
"LINK : warning LNK4254: section '.data' (C0000040) merged into
'.text' (60000020) with different attributes"
But final attribute in PE code section is same.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
There exits the case that when saving changes in form A,
the old saved data in form B are not cleaned, will be saved
again with the new save. Thus incorrect UI behavior will be
shown. This patch is to remove some useless data.
https://bugzilla.tianocore.org/show_bug.cgi?id=385
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
For string op-code, the default string may not reach the
maximum size, so when generating <AltResp> string, we should
clean the value before setting the default string.
https://bugzilla.tianocore.org/show_bug.cgi?id=375
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When set value to the array "InputText", the index was used incorrectly.
And the array "InputText" is not initialized. These will cause some value
in the array is random, so it will be shown incorrectly sometimes.
This patch is to fix this issue.
https://bugzilla.tianocore.org/show_bug.cgi?id=358
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Wang Cloud <winggundum82@163.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add the following 2 APIs:
UnicodeValueToStringS
AsciiValueToStringS
These safe version APIs are used to enhance their counterpart (APIs
without trailing 'S' in function names).
They perform checks to the input parameters and will return relative
status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
These APIs in the MdeModulePkg/DxePrintLibPrint2Protocol instance
follow the same rules with MdePkg/BasePrintLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The commit updates the PrintLib instance
MdeModulePkg/Library/DxePrintLibPrint2Protocol to use EFI_PRINT2S_PROTOCOL
to implement the APIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the EFI_PRINT2S_PROTOCOL as a safe version of the EFI_PRINT2_PROTOCOL,
the EFI_PRINT2S_PROTOCOL replaces the following 2 services in
EFI_PRINT2_PROTOCOL:
UNICODE_VALUE_TO_STRING
ASCII_VALUE_TO_STRING
with:
UNICODE_VALUE_TO_STRING_S
ASCII_VALUE_TO_STRING_S
The 2 new services perform checks to the input parameters and will return
relative status to reflect the check result.
Return RETURN_INVALID_PARAMETER when:
1). The input Buffer is NULL.
2). The input BufferSize is greater than (PcdMaximumUnicodeStringLength *
sizeof (CHAR16) + 1) for UnicodeValueToStringS or greater than
PcdMaximumAsciiStringLength for AsciiValueToStringS.
3). The input Flags is not set properly.
4). The input Width is not smaller than MAXIMUM_VALUE_CHARACTERS.
Return RETURN_BUFFER_TOO_SMALL when:
1). The input BufferSize cannot hold the converted value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the following 8 services in EFI_PRINT2_PROTOCOL:
UNICODE_BS_PRINT
UNICODE_S_PRINT
UNICODE_BS_PRINT_ASCII_FORMAT
UNICODE_S_PRINT_ASCII_FORMAT
ASCII_BS_PRINT
ASCII_S_PRINT
ASCII_BS_PRINT_UNICODE_FORMAT
ASCII_S_PRINT_UNICODE_FORMAT
They will ASSERT when:
1) The input parameter 'StartOfBuffer' is NULL if 'BufferSize' indicates
at least 1 Ascii/Unicode character can be held.
2) The input parameter 'FormatString' is NULL if 'BufferSize' indicates at
least 1 Ascii/Unicode character can be held.
3) The input parameter 'FormatString' contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
4) The produced string contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
This commits removes the ASSERT case 4) and add the following new ASSERT
case:
4) The input parameter 'BufferSize' is greater than
(PcdMaximumAsciiStringLength * sizeof (CHAR8)) for Ascii format string or
(PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for Unicode format
string.
And for those ASSERT cases, 0 will be returned by those services.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For the following 12 APIs in MdeModulePkg/DxePrintLibPrint2Protocol:
UnicodeVSPrint
UnicodeBSPrint
UnicodeSPrint
UnicodeVSPrintAsciiFormat
UnicodeBSPrintAsciiFormat
UnicodeSPrintAsciiFormat
AsciiVSPrint
AsciiBSPrint
AsciiSPrint
AsciiVSPrintUnicodeFormat
AsciiBSPrintUnicodeFormat
AsciiSPrintUnicodeFormat
They will ASSERT when:
1) The input parameter 'StartOfBuffer' is NULL if 'BufferSize' indicates
at least 1 Ascii/Unicode character can be held.
2) The input parameter 'FormatString' is NULL if 'BufferSize' indicates at
least 1 Ascii/Unicode character can be held.
3) The input parameter 'FormatString' contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
4) The produced string contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
This commits removes the ASSERT case 4) and add the following new ASSERT
case:
4) The input parameter 'BufferSize' is greater than
(PcdMaximumAsciiStringLength * sizeof (CHAR8)) for Ascii format string or
(PcdMaximumUnicodeStringLength * sizeof (CHAR16) + 1) for Unicode format
string.
And for those ASSERT cases, 0 will be returned by those 12 APIs.
For the following 2 APIs in MdeModulePkg/DxePrintLibPrint2Protocol:
SPrintLength
SPrintLengthAsciiFormat
They will ASSERT when:
1) The input parameter 'FormatString' is NULL.
2) The input parameter 'FormatString' contains more than
PcdMaximum[Ascii|Unicode]StringLength Ascii/Unicode characters.
And for those ASSERT cases, 0 will be returned by those 2 APIs.
Now these APIs in the MdeModulePkg/DxePrintLibPrint2Protocol instance
follow the same rules with MdePkg/BasePrintLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, When there are more than 9 Ethernet ports available,
'ifconfig -l' is not listing all the ports, only show the ports 0 to 9.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Compiler calculates the PciBar[BarIndex] using
sizeof (PciBar[0]) * BarIndex, when BarIndex is type of UINT64,
the above calculation generates assembly code using _allmul.
Change BarIndex to UINTN to avoid the build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
When the VendorId/DeviceId/RevisionId/SubsystemVendorId
/SubsystemDeviceId is MAX_UINTN, IncompatiblePciDeviceSupport
driver doesn't use it to match any IDs.
The patch fixes this bug.
Since PciBus driver always calls IncompatiblePciDeviceSupport
using IDs read from HW, MAX_UINTN is never passed to this
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The patch replaces the following macros:
DEVICE_ID_NOCARE (0xFF) --> MAX_UINT64
PCI_ACPI_UNUSED (0) --> 0
PCI_BAR_ALL (0xFF) --> MAX_UINT64
PCI_BAR_NOCHANGE (0) --> 0
PCI_BAR_EVEN_ALIGN --> EVEN_ALIGN (local definition)
Since the PciBus driver was updated to accept Spec defined values
in previous commit, the above replacements don't impact
functionality.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PI spec IncompatiblePciSupport part defines (UINT64)-1 as all BARs
and 0 to use existing alignment. PciBus driver didn't accept these
values. It treated 0xFF as all BARs and 0xFFFFFFFFFFFFFFFFULL to use
existing alignment.
The patch changes the code to still accept old values while also
accept values defined in PI spec. So that the driver can provide
backward compatibility and follow spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When BarIndex equals to 0xFF, default value 0 is used as the BAR
index. Though PCI_BAR_ALL and MAX_UINT8 shares the same value,
using PCI_BAR_ALL is like to match any BAR not BAR 0, it's more
proper to use MAX_UINT8 here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If GUIDED section authentication has EFI_AUTH_STATUS_NOT_TESTED, its
matched extraction ppi may not be installed. So, don't cache its data.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When PEIM is security violation, its matched extraction ppi may not be
installed. So, its PeimNeedingDispatch will still reset to TRUE.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Replace AsciiStrDecimalToUintn with AsciiStrDecimalToUintnS to
return the correct status for the HTTP Port/ContentLength.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
BmExpandMediaDevicePath contains a bug that it uses the
uninitialized Handle.
Since the function is called when the Handle supports BlockIo
or SimpleFileSystem, when there is no SimpleFileSystem installed
on the Handle, BlockIo is *guaranteed* to be installed on the Handle.
The fix initializes the Handle by locating the BlockIo protocol
from the device path.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Use UEFI_VARIABLE_DATA data structure according to TCG PC-Client PFP Spec
00.21.
http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=339
The patch refines ConfigurePixelBitMaskFormat() to prepare the
enhancement in next commit: Enhance this library to use dynamic
allocated line buffer to reduce memory usage of frame buffer
configure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Measure DBT into PCR[7] when it is updated between initial measure and
ExitBootService. Measure "SecureBoot" change after PK update.
Spec version : TCG PC Client PFP 00.37. http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific_Platform_Profile_for_TPM_2p0_Systems_v21.pdf
Cc: Star Zeng <star.zeng@intel.com>
Cc: Yao Jiewen <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
If the code eventually returns "Status" anyway, it does not make
sense to explicitly return "Status" in case of an error, too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The OCS value should be initiliazed as 0x0F according to UFS spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The OCS value should be initiliazed as 0x0F according to UFS spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When UPIU packet is sent, (BIT0 << Slot) should be set according
to context. But BIT0 is used without Slot when UfsWaitMemSet ()
is invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When UPIU packet is sent, (BIT0 << Slot) should be set according
to context. But BIT0 is used without Slot when UfsWaitMemSet ()
is invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When UFS_HC_CAP_64ADDR bit is set, it means 64-bit address,
not 32-bit address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=324
Enhance the FileExplorerlib so that user can create a new file/folder
through the UI page.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=342
When user select and enter a directory, File Explorer will update the
form based on the new folders and files in the directory. But when
creating question opcodes, the question id is same with previous one
and this will cause browser to show the highlight menu incorrectly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=323
FileExplorer no need to search load file protocol to show files.
Now remove the codes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Pass '&Node.Header' instead of '&Node' as the 1st parameter to function
SetDevicePathNodeLength().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
DxeCorePerformanceLib is the performance log manager of PEI and DXE
phase, and it will also produce Performance(Ex) protocol, it should
only support linking with DxeCore.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Refine the codes to compare the definition 'SIZE_4GB' with type
EFI_PHYSICAL_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The type of return value for function EfiBootManagerFindLoadOption() is
INTN. When checking its return value, it is unnecessary to type cast -1 to
type UINTN.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
When gDS->SetMemorySpaceCapabilities() is called,
current DXE core will sync all GCD attributes to memory map
attributes, including RUNTIME attributes.
It is wrong, because RUNTIME attributes should be set for
runtime memory only.
This fix clears the RUNTIME attributes before convert to UEFI
memory map. So that the UEFI memory map is good after
gDS->SetMemorySpaceCapabilities() is called.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
TerminalDxe driver contains bugs in its DriverBindingStart():
1. It cannot be started AGAIN using a different terminal type;
2. It doesn't install SimpleTextInput/SimpleTextOut when
ConIn/ConOut doesn't contain its device path. The check is
duplicated of the same logic in ConPlatform driver and can
be removed.
The patch optimized the code to remove the unnecessary
gEfiCallerIdGuid protocol installation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If a BaseAddress of NULL is passed into DXE Core services
CoreAllocateIoSpace() or CoreAllocateMemorySpace(), and
DEBUG() messages are enabled, then a NULL pointer reference
is made. The parameter check for BaseAddress is performed
in the function CoreAllocateSpace() after the DEBUG()
messages. A check is added in the DEBUG() messages to
prevent the NULL pointer reference.
This issue was found with PI SCTs with DEBUG messages
enabled in the DXE Core.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When firmware boots to UiApp, the memory type information settings
are saved to NV storage and the settings in HOB are changed as well.
Because UiApp is an APPLICATION type of boot option, system doesn't
reset when settings change.
But when user selects OS to boot in UiApp, because the settings in HOB
was updated when booting to UiApp, the BDS doesn't think the settings
change, expected reset doesn't happen.
The patch fixes this issue to not update the settings in HOB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Ip4Config2SetDnsServer may cause ASSERT if the invalid DNS
server address received. The issue is triggered by the NULL
pointer(Tmp) free.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The BootScriptWriteMemPoll() helper function in both drivers does the
following:
- pop Delay from the variable argument list as UINT64, then truncate it to
UINTN,
- divide Delay by 10, using DivU64x32Remainder(), then store the quotient
in LoopTimes (also UINTN),
- pass LoopTimes to S3BootScriptSaveMemPoll() as last argument.
The truncation to UINTN is superfluous and wrong in this logic (not to
mention incompatible with the PI spec); it prevents callers from
specifying Delays longer than 0xFFFF_FFFF * 100ns (approximately 429
seconds == 7 minutes 9 seconds) on Ia32. In particular it prevents callers
from specifying an infinite timeout (for example, 0xFFFF_FFFF_FFFF_FFFF *
100ns, approximately 58494 years).
Change the type of Delay and LoopTimes to UINT64. Keep the same logic,
just remove the truncations. The resultant LoopTimes values can be safely
passed to S3BootScriptSaveMemPoll() thanks to the previous patch.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
The BaseNull instance of S3BootScriptLib obviously doesn't care about the
type of the S3BootScriptSaveMemPoll() function's LoopTimes parameter; this
lib instance doesn't do anything with the parameters received in
S3BootScriptSaveMemPoll().
The PiDxe instance saves the LoopTimes parameter in
EFI_BOOT_SCRIPT_MEM_POLL.LoopTimes. This target field already has UINT64
type. Furthermore, the BootScriptExecuteMemPoll() function in the same
library instance already uses a local UINT64 variable called LoopTimes to
count up to EFI_BOOT_SCRIPT_MEM_POLL.LoopTimes. This means that the the
UINTN type for S3BootScriptSaveMemPoll()'s LoopTimes parameter is an
unnecessary restriction.
The callers of S3BootScriptSaveMemPoll() will be updated in the next
patches, functionally. At this stage, they will continue to compile, since
UINT64 parameters can accept UINTN arguments.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=307
For the following APIs in PrintLib instance
MdeModulePkg\Library\DxePrintLibPrint2Protocol:
UnicodeVSPrint
UnicodeSPrint
UnicodeVSPrintAsciiFormat
UnicodeSPrintAsciiFormat
AsciiVSPrint
AsciiSPrint
AsciiVSPrintUnicodeFormat
AsciiSPrintUnicodeFormat
The internal function DxePrintLibPrint2ProtocolVaListToBaseList() will be
called to convert a VA_LIST to a BASE_LIST. However, those APIs miss
checking the return value of the internal function.
This commit adds codes to check the return value. If the VA_LIST fails to
be converted to a BASE_LIST, those PrintLib APIs will return 0 and leave
the output 'StartOfBuffer' unmodified.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Current implementation executes key notify function in TimerHandler
at TPL_NOTIFY. The code change is to make key notify function
executed at TPL_CALLBACK to reduce the time occupied at TPL_NOTIFY.
The code will signal KeyNotify process event if the key pressed
matches any key registered and insert the KeyData to the EFI Key
queue for notify, then the KeyNotify process handler will invoke
key notify functions at TPL_CALLBACK.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Register key notify for toggle state (CapsLock, NumLock and ScrollLock)
sync between multiple keyboards.
The implementation for this feature requires keyboard driver supports
EFI_KEY_STATE_EXPOSED, and turns on physical TextInEx partial key
report for toggle state sync.
The virtual TextInEx will report the partial key after it is required
by calling SetState(X | KEY_STATE_VALID_EXPOSED) explicitly.
Cc: Ruiyu Ni <Ruiyu.ni@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
Previous logic does not follow UEFI 22.2.3 to process FMP strictly.
It may cause FMP image not be processed in some corner case.
The updated logic follows UEFI 22.2.3.
The way to check if a capsule is processed is also simplified.
The function - ProcessFmpCapsuleImage() is too big, so that
we created sub-functions - StartFmpImage(), DumpAllFmpInfo(),
GetFmpHandleBufferByType(), SetFmpImageData(), RecordFmpCapsuleStatus()
to improve the readability.
The function - ProcessTheseCapsules() is too big, so that
we created sub-functions - InitCapsulePtr(), AreAllImagesProcessed(),
PopulateCapsuleInConfigurationTable() to improve the readability.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, capsule result variable may roll over to 0.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, capsule report variable should include
a null terminator for capsule name and capsule target, if they are
not present.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
According to UEFI spec, capsule report variable should include
a null terminator for capsule name and capsule target, if they are
not present.
The reserved field is zeroed.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit refines the logic for the CvtNum function. It avoids using the
decrement operator '--' for array index to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
This commit rewrites the logic for NetblockChecksum. It processes the
checksum of the left-over byte first to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
For variable name, it should contain lower case characters.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This patch remove the ASSERT when receive a DHCP packet large than the maximum
cache buffer size.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Add support for non-coherent DMA, either by performing explicit cache
maintenance when DMA mappings are aligned to the CPU's DMA buffer alignment,
or by bounce buffering via uncached mappings otherwise.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some Pcds are added to the dec file, but miss to add the
prompt&&help info to the uni file, now add them.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Fix switch/case statement type mismatch in functions PciIoMemRead &
PciIoMemWrite.
Parameter 'Width' is of enum type EFI_PCI_IO_PROTOCOL_WIDTH, but the enum
type provided in 'switch (Width)' block is of type
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
PiSmmIpl records LoadModuleAtFixAddressSmramBase in LMFAConfigurationTable.
Update PiSmmCore to directly get the address from this system table.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Allocate the additional Smram range to describe the reserved smram for
SMM core and driver when LMFA feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=278
Zero memory address or zero number pages are invalid to SmmFreePages().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=290
Current SmmVariableGetStatistics() in VariableSmm.c is always
checking input InfoSize against the first variable info,
it is incorrect.
For instance, there are three variables.
BootOrder
Boot0000
Boot0001
If the input InfoEntry is holding the second variable info (Boot0000)
and InfoSize is sizeof (VARIABLE_INFO_ENTRY) + StrSize (L"Boot0000"),
current code will return EFI_BUFFER_TOO_SMALL, but it should return
the third variable info (Boot0001).
This patch is to refine the code logic.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Current code in SmmVariableHandler() checks CommBufferSize
buffer to make sure it points to outside SMRAM in
"case SMM_VARIABLE_FUNCTION_GET_STATISTICS".
But after eaae7b33b1,
CommBufferSize buffer points to SMRAM that was used by
SMM core to cache CommSize from SmmCommunication protocol,
then the check will fail definitely and GET_STATISTICS
feature breaks.
In fact, do not need check CommBufferSize buffer at all
even before eaae7b33b1.
Before eaae7b33b1,
CommBufferSize buffer pointed to gSmmCorePrivate->BufferSize
that is outside SMRAM, the check will success definitely;
after eaae7b33b1,
CommBufferSize buffer points to local variable BufferSize
(in SMRAM) in SmmEntryPoint(), the check is not needed
definitely.
The patch is to remove the check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add missing EFIAPI modifiers to the functions that are exposed via the
PCI I/O protocol.
At the same time, add a missing UINT8 cast which breaks the build on
Visual Studio.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
PlatformBootManagerBeforeConsole() might want to trigger this event
to connect ConIn so BdsDxe initializes this event before
PlatformBootManagerBeforeConsole().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
This implements support for non-discoverable PCI compatible devices, i.e,
devices that are not on a PCI bus but that can be controlled by generic PCI
drivers in EDK2.
This is implemented as a UEFI driver, which means we take full advantage
of the UEFI driver model, and only instantiate those devices that are
necessary for booting.
Care is taken to deal with DMA addressing limitations: DMA mappings and
allocations are moved below 4 GB if the PCI driver has not informed us
that the device being driven is 64-bit DMA capable. DMA is implemented as
coherent, support for non-coherent DMA is implemented by a subsequent patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Non-discoverable devices need to be registered explicitly by the platform.
Introduce a helper library that takes care of this.
This implementation currently only supports registering devices that are
covered by one or more MMIO resources. The underlying protocol allows for
more flexibility than that, but this is currently sufficient for the use
cases that we know about.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Introduce a protocol that can be exposed by a platform for devices that
are not discoverable, usually because they are wired straight to the
memory bus rather than to an enumerable bus like PCI or USB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the ConfigFormEntry structure
will be freed in IScsiDriverBindingStop, but the
mCallbackInfo->Current is not configured as null and
this pointer will be used again in IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
EFI_PAGES_TO_SIZE only handles UINTN, so we use EfiPagesToSize
to handle UINT64.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Current memory attribute table implementation will only mark PE code
to be EfiRuntimeServicesCode, and mark rest to be EfiRuntimeServicesData.
However, there might be a case that a SMM code wants to allocate
EfiRuntimeServicesCode explicitly to let page table protect this region
to be read only. It is unsupported.
This patch enhances the current solution so that MemoryAttributeTable
does not touch non PE image record.
Only the PE image region is forced to be EfiRuntimeServicesCode for
code and EfiRuntimeServicesData for data.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
PiSmmCore supports page level protection based upon the Memory Type
(EfiRuntimeServicesCode/EfiRuntimeServicesData) and PE image.
However, the Memory Type information is ignored in AllocatePool().
If a caller calls AllocatePool with EfiRuntimeServicesCode,
the final memory is still allocated as EfiRuntimeServicesData.
This patch supports AllocatePool with EfiRuntimeServicesCode.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add the comments to describe Free and Allocated SMRAM are added separately.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Port status bits are clear in original code, so no enumeration
takes place.
Changing this to prevent the status bits from being cleared
allows enumeration to proceed normally.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Mike Turner <Michael.Turner@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mike Turner <Michael.Turner@microsoft.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The commit e27cca has a typo on DEBUG level macro. And this debug
message should be DEBUG_INFO rather than DEBUG_ERROR.
Cc: Jan Dabros <jsd@semihalf.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
reviewed-by: Marcin Wojtas <mw@semihalf.com>
We add Fmp->GetImage() support in CapsuleApp. So that user may call
Fmp->GetImage() in UEFI shell environment.
This is useful to do unit test for FMP which supports GetImage(),
or user wants to get current image, such as Microcode.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
EFI_D_INFO, EFI_D_VERBOSE, EFI_D_WARN and EFI_D_ERROR are replaced
with currently recommended values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
* Introduce a generic Debugger Configuration protocol.
* Add private configuration data in the EBC Debugger and make it
register the Debugger Configuration protocol on initialization.
* Add a shell application that uses the protocol above to access
the private data in order to configure the EBC debugger.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Make SetPeiServicesTablePointer() earlier than ProcessLibraryConstructorList()
so the constructor() function can get the correct pei service table pointer.
https://bugzilla.tianocore.org/show_bug.cgi?id=238
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Current code is using L'\0' to compare with a ASCII char.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function EdbLoadCodBySymbolByIec(), AsciiStrGetNewTokenField() at line
1589 will return NULL if the first character in 'LineBuffer' is '\0'. But
the previous if statement at line 1576 ensures the above case will not
happen.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In function DebuggerDisplaySymbolAccrodingToAddress(), when variable
'CandidateAddress' (returned by EbdFindSymbolAddress function) equals
(UINTN) -1, it also indicates that the symbol is not found at the given
address.
This commit adds this missing check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add checks for the return value of function Atoi() in EdbCmdBreakpoint.c.
If the input parameter 'CommandArg' contains non-digit character, print
corresponding error message.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Operands in a bitwise operation should have the same size to eliminate
unexpected results.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In current DriverSampleDxe, the sample code of password is
not a good example, so we plan to remove it.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In current SetupBrowser, the logic related to non-interative password
is not correct. How to support it correctly or whether support it
is still under investigation. First step remove the incorrect logic.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
when the password is not supported, pop up a dialogue
to let user know the reason.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
According to AHCI Spec 1.3 GHC.AE bit description:
"The implementation of this bit is dependent upon the value of the
CAP.SAM bit. If CAP.SAM is '0', then GHC.AE shall be read-write and shall
have a reset value of '0'. If CAP.SAM is '1', then AE shall be read-only
and shall have a reset value of '1'."
Being in AhciMode, for proper operation it is required, that GHC.AE bit
is always set, before any other AHCI registers are written to. Current
AhciMode implementation, both in AhciReset() and AhciModeInitialization()
functions, set GHC.AE bit only depending on 'CAP.SAM == 0' condition,
assuming (according to the AHCI spec), that otherwise it has to be set
anyway. It may however happen, that even if 'CAP.SAM == 1', GHC.AE
requires updating by software.
This patch enables in AhciMode setting GHC.AE in case its initial value
is '0'. It fixes AHCI support for Marvell Armada 70x0 and 80x0 SoC
families. The change is transparent to all other platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We send ADDRESS DEVICE CMD in XhcInitializeDeviceSlot(), which will
cause XHC issue a USB SET_ADDRESS request to the USB Device.
According to USB spec, there should have a 10ms delay before this
operation after resetting a given port.
But in original code, there is a possible path which may have no such
10ms delay:
UsbHubResetPort()->UsbHubSetPortFeature()->Stall(20)->UsbHubGetPortSt
atus()->XhcPollPortStatusChange()->(if RESET_C bit is set)->
XhcInitializeDeviceSlot()->(if RESET_C bit is set)->Stall(10)
So this patch is used to fix above issue.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Tested-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch is used to allow the IPv4 with prefix case.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
VM related defs are now in EbcVmTest.h, and opocode related definitions in
Ebc.h.
Because it is used by both the EBC Debugger and driver,
EbcDebugSignalException() sees its definition factorized in
EbcDebuggerHook.h.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* This patch introduces EbcDebuggerHook.c/h and inserts the required
EBCDebugger references into the existing EBC source files.
* With all the hooks defined to their empty version in EbcDebuggerHook.c
the existing EBC VM behaviour is left unaffected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When returning selectable menu, should return the menu in current form,
the codes miss to do the check. Now returning the selectable menu behind
the codes "if ((UINTN) Distance + NextMenuOption->Skip > GapToTop)".
Then can cover the check, can return the menu correctly.
https://bugzilla.tianocore.org/show_bug.cgi?id=232
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Function GetVariable2() ensures its third (output) parameter will not be
NULL when the return status is EFI_SUCCESS.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
gSmmCorePrivate->CommunicationBuffer and gSmmCorePrivate->BufferSize locate at
runtime memory region. That means they could be modified by non-SMM code during
runtime.
We should cache them into SMM local variables before we verify them. After
verification, we should use the cached ones directly instead of the ones in
gSmmCorePrivate.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
This patch updates the PXE driver to drop the input DHCP packet if it
exceed the maximum length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Current implementation always creates PlatformRecovery0000
pointing to \EFI\BOOT\BOOT$(ARCH).efi but it may overwrite
PlatformRecovery#### created before (maybe by a DXE driver).
The patch only uses the smallest unused option number for
the \EFI\BOOT\BOOT$(ARCH).efi PlatformRecovery#### to avoid
overwriting already-created PlatformRecovery####.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The implementation doesn't check the LoadOptions[Index].Status but
only depends on the Status returned from
EfiBootManagerProcessLoadOption(), which results only the first
PlatformRecovery#### runs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Current CpuExceptionHanderLibNull instance returns EFI_SUCCESS for all three
services. If platform does not want to hook the Exception vector for some
modules (For example DxeCore), it could select this NULL instance in DSC file
for those module. But some modules that want to consume
RegisterCpuInterruptHandler() cannot use NULL instance. If platform does not
select the correct library instance, it will does work. But the caller does not
recognize it.
This update is to return EFI_UNSUPPORTED on RegisterCpuInterruptHandler() in
NULL instance instead of return EFI_SUCCESS. Once platform selects this NULL
instance, the caller could know it from return status.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
This table describes the SMM memory attributes.
The new GUID gEdkiiPiSmmMemoryAttributesTableGuid and its associated
structure are based on the EFI_MEMORY_ATTRIBUTES_TABLE and GUID from the
UEFI Specification.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: update commit message as requested by Michael Kinney]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The memory will be set to background color after success allocate
the data, so not need to call AllocateZeroPool.
Related bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=223
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The SMM memory attribute table concept is similar to UEFI
memory attribute table.
The new file MdeModulePkg/Core/PiSmmCore/MemoryAttributesTable.c
and the new code in MdeModulePkg/Core/PiSmmCore/Page.c
are based on the algorithms and implementation from
MdeModulePkg/Core/Dxe/Misc/MemoryAttributesTable.c
and MdeModulePkg/Core/Dxe/Mem/Page.c.
These new components are based on the Memory Attributes Table
feature from the UEFI Specification and the existing DXE Core
implementation that supports that feature.
This SMM MemoryAttributes table is produced at SmmEndOfDxe event.
So that the consumer (PiSmmCpu) may consult this table
to set memory attribute in page table.
This patch also installs LoadedImage protocol to SMM
protocol database, so that the SMM image info can be
got easily to construct the PiSmmMemoryAttributes table.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This table describes the SMM memory attributes.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This patch made the following change:
* DataItem->Status should be updated to the status code.
* Data should not be freed if EFI_NOT_READY returned.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
v2:
* Separate out the return status fix.
* Replace IP4_MASK_MAX with IP4_MASK_NUM.
* Remove the ON_EXIT label.
This patch is used to add the wrong/invalid subnet check.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
remove EFI_CAPSULE_FROM_FILE_DIR
remove EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED.
no one uses them.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This patch is used to revert changes done in commit 17f3e942
bc527fbd75068d2d5752b6af54917487 - "MdeModulePkg/UsbMass: Not
retry if usb bot transfer execution fail"
It's because Usb Floppy will report DEVICE_ERROR for the first
several cmds when it need spin up. so retry logic makes sense.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
FreePool (Blt) function will be called in while loop, cannot be removed.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The 3rd party image should be loaded after EndOfDxe event signal and
DxeSmmReadyToLock protocol installation. But non-SMM platform doesn't
published DxeSmmReadyToLock protocol.
So the SecurityStubDxe can only depend on EndOfDxe event.
This patch enhances the SecurityStubDxe to listen on
DxeSmmReadyToLock protocol installation and if any 3rd party image
is loaded before DxeSmmReadyToLock, it reports failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The patch adds check of deferred images before booting to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The API dispatches the deferred images that are returned from all
DeferredImageLoad instances.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The images not from FV are treated as 3rd party images. They will
be deferred to dispatch when they are dispatched before EndOfDxe
event.
It's a new feature in the BS.LoadImage() path which can disallow
executing 3rd party images before EndOfDxe and re-execute them
after EndOfDxe (through EfiBootManagerDispatchDeferredImages
introduced in next commit).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
When PciSioSerial is firstly started with a non-NULL remaining
device path, the UART instance is created using the parameters
specified in the remaining device path. Later when the driver
is started again on the same UART controller with NULL remaining
device path, the correct logic is to directly return SUCCESS
instead of current buggy implementation which wrongly produces
another UART using the default parameters.
The bug causes two UARTs are created when the UART is configured
in 57600 baud rate.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
PeiServicesAllocatePages () will output sizeof (EFI_PHYSICAL_ADDRESS) value.
IdtTableForX64 is sizeof (UINTN) local variable. It will overwrite other local
variable.
This issue is found when we dump BaseOfStack value.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Dump new stack base and size information could help developer to narrow down
stack crash issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to UFS Host Controller Spec(JESD223), the bits 1:0 of this
DataByteCount field shall be 11b to indicate Dword granularity.
But the size of UFS Request Sense Data Response defined in UFS Spec
(JESD220C) is 18 which is not Dword aligned, we would have to round
down to the multiple of 4 to fill the DBC field to avoid bring issue
on some UFS HCs.
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The UiApp is updated to consume PcdTestKeyUsed to know if there is any
test key used in current BIOS, such as recovery key,
or capsule update key.
Then UiApp show warning information in front page.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
This CapsuleApp can help perform capsule update in UEFI shell environment.
It can also dump capsule information, capsule status variable,
ESRT and FMP.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
The previous ESRT driver unconditionally treat FMP to be
ESRT_FW_TYPE_DEVICEFIRMWARE.
EDKII System Capsule reuses FMP, but it is ESRT_FW_TYPE_SYSTEMFIRMWARE.
Add check to ImageTypeId check to see if it is ESRT_FW_TYPE_SYSTEMFIRMWARE.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
This instance handles Microsoft UX capsule, UEFI defined FMP capsule.
This instance should not assume any capsule image format.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
1) Add capsule related library.
FmpAuthenticationLib
2) Add capsule related status code PCD.
PcdStatusCodeSubClassCapsule
PcdCapsuleStatusCodeProcessCapsulesBegin
PcdCapsuleStatusCodeProcessCapsulesEnd
PcdCapsuleStatusCodeUpdatingFirmware
PcdCapsuleStatusCodeUpdateFirmwareSuccess
PcdCapsuleStatusCodeUpdateFirmwareFailed
PcdCapsuleStatusCodeResettingSystem
3) Add capsule status variable PCD - CapsuleMax value.
PcdCapsuleMax
4) Add system FMP indicator PCD - used by ESRT.
PcdSystemFmpCapsuleImageTypeIdGuid
5) Add PcdTestKeyUsed PCD.
This PCD can be set by platform to indicate if there is any
test key used in current BIOS, such as recovery key,
or capsule update key.
Then the generic UI may consume this PCD to show warning information.
Other platform driver may also consume this PCD to know such info,
and report it via platform specific way.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
ProcessCapsules() API can be used by platform BDS to process all capsules.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
This library is used to authenticate a UEFI defined FMP Capsule.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
If there are two DynamicEx PCDs have the same PCD token number but
in different PCD token spaces, the PcdGetNextToken function may get
the wrong PCD token.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Short Packet case is a normal case, we shouldn't print it as an error
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
AhciDumpPortStatus doesn't fully populate all the fields of
AtaStatusBlock after completing command execution, which may bring
issue if someone depends on the return status.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The classful addressing (IP class A/B/C) has been deprecated according to
RFC4632. This patch updates the NetLib NetGetIpClass() and NetIp4IsUnicast()
accordingly.
NetGetIpClass()
The function is kept for compatibility, while the caller of this function
could only check the returned value against with IP4_ADDR_CLASSD (multicast)
or IP4_ADDR_CLASSE (reserved) now. The function has been updated to note this.
NetIp4IsUnicast()
The NetMask becomes a required parameter to check the unicast address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=190
The issue is with signed/unsigned comparisons between
Mode->CursorRow and Row and Mode->CursorColumn and Column.
The fix is to add typecast to UINTN for comparisons.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Brian Johnson <bjohnson@sgi.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Brian Johnson <bjohnson@sgi.com>
In one of the next patches, we'll introduce ARRAY_SIZE in
"MdePkg/Include/Base.h". In order to proceed in small steps, make the
module-local definition of ARRAY_SIZE conditional. This way the
introduction of the macro under MdePkg will silently switch this module
over (after which we can remove the module-local definition completely).
Cc: Cecil Sheng <cecil.sheng@hpe.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The TtyTerm terminal driver is missing support for sequences produced
by the page up, page down, insert, home, and end keys in some terimnal
emulators. Add them.
Tested under Ubuntu 16.04 using xterm 322-1ubuntu1, GNOME terminal
3.18.3-1ubuntu1, and XFCE terminal 0.6.3-2ubuntu1.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Kyle Roberts <kyroberts@sgi.com>
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Roy Franz <roy.franz@hpe.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
For TtyTerm terminals, output a shorter escape sequence when possible
to move the cursor within the current line, and don't print any escape
sequence if the cursor is already at the correct position. This
removes extra cursor motion activity at the EFI shell prompt,
improving performance. It also makes it possible in many cases to
successfully use a terminal window which is taller than the driver's
mode setting (eg. 80x25.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
When we print the last character on a line, the terminal driver wraps
CursorRow/CursorColumn to the beginning of the next line. But the
terminal itself doesn't wrap its cursor until the next character is
printed. That throws off the driver's cursor position tracking.
So when we have printed the last character on a line, and are not in
the middle of outputing an escape sequence, synchronize the terminal
with the driver by outputing CR+LF. This matches the expected
behavior, and the behavior of the VGA console driver.
Only change the behavior of TtyTerm, not the other terminal types.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brian Johnson <bjohnson@sgi.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The function which handles the "Boot####", "BootOrder" ...
may return failure. This patch adds the error handling codes.
return the failure info to browser.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When user enter the "Change Boot Order" page, the BootOptionOrder in
BmmFakeNvData may maintain some uncommitted data which are not saved
in "BootOrder" Variable and BootOptionMenu. So we should not always get
the BootOptionOrder through the function GetBootOrder, it will
result in incorrect UI behaviors. When the BootOptionOrder has not been
saved, we should use the BootOptionOrder in current BmmFakeNvData.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In BootMaintRouteConfig function, it will compare the data in BmmFakeNvData
and BmmOldFakeNVData to see whether there are some changes need to save.
In current codes when discarding changes or removing the useless changes,
it will update the related fields in BmmFakeNvData.
But also need to update related fields in BmmOldFakeNVData,
or it will result in incorrect comparison in BootMaintRouteConfig function,
then resulting in incorrect UI behaviors.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When updating console page, the "ConsoleCheck" in BmmFakeNvData may maintain
the old uncommitted data, we should not copy it to BmmOldFakeNVData.
And in BootMaintRouteConfig function, when save data successfully,
it will copy the BmmFakeNvData to the BmmOldFakeNVData.
So we can delete the logic here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In current codes, When user does some change related to Console or Terminal,
when saving data, it will update the content in TerminalMenu and ConsoleMenu
in BootMaintRouteConfig function. This patch moves the update action to the
BootMaintCallback function with EFI_BROWSER_ACTION_CHANGED type.
The reason for this change is: in BootMaintRouteConfig function when
Var_UpdateConsoleXXXOption() return failure and user discard the previous
change, we should re_update the content in the TerminalMenu and ConsoleMenu.
So we move the update action to the changed callback.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When fail to submit data and user discard the change, we should send
the discard info to driver with EFI_BROWSER_ACTION_CHANGED callback.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In function 'LibAppendFileName' of 'FileExplorer.c':
"
MaxLen = (Size1 + Size2 + sizeof (CHAR16))/ sizeof (CHAR16);
"
Overflow may happen here. MaxLen might become a very small number.
This patch adds integer overflow checker.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
When PciBus is built as EBC, PcdPciDegradeResourceForOptionRom does
not have associated value resulting build failure.
The patch sets the default value to TRUE, covering the EBC ARCH.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The driver uses the GraphicsInfo HOB and GraphicsDeviceInfo HOB
passed from PEI to find the graphics controller to manage and
produce the GraphicsOutput protocol.
GraphicsInfo HOB and GraphicsDeviceInfo HOB are created by
a PEIM which initializes the graphics controller hardware in
PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This PCD is used to indicated the recovery file name.
The previous name - FvMain.Fv is hardcoded in FatPei and CdExpressPei.
It does not make sense to force the name.
Now a platform may use any recovery file name.
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tcp driver need to use EFI_D_NET to log DEBUG message,
So it becomes easy to separate/filter out debug messages
from network stack versus generic EFI_D_INFO debugs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
The return value of GetImageIdOrAddress() could be NULL if the
ImageId is invalid. The patch fixes the bug to return EFI_NOT_FOUND
when GetImageIdOrAddress() returns NULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The type of variable "SmallestIdFromFlag" should be BOOLEAN,
this patch fix the incorrect type.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Current PeiCdExpress driver will return capsule size to
be block aligned.
It will fail if we check the capsuleImageSize field.
The patch correct the returned capsule size.
Tested-by: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The two libraries are created to support old BootLogoLib to
decode the images. Due to the new BootLogoLib starts using
HiiImageEx interfaces, the two libraries are not needed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
LogoDxe embeds the image resource in the PE resource section, then
it produces Platform Logo protocol which can return the images
in pixel format.
HiiImageEx protocol is responsible to decode the JPEG/PNG images
to pixel format. LogoDxe driver uses HiiImageEx protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Change PlatformLogo protocol to return EFI_IMAGE_INPUT instead of
RAW image data. PlatformLogo implementation can use HiiImageEx to
decode the image if it's JPEG or PNG format.
2. Change BootLogoLib to consume the new PlatformLogo protocol.
3. Change BootLogoEnableLogo() to only use images returned from
PlatformLogo protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
According to UEFI spec, NewImageEx()/SetImageEx()/DrawImageEx()
implicitly call the non-Ex version interface
of HiiImage protocol.
GetImageEx()/DrawImageIdEx() are the enhanced version of
GetImage()/DrawImageId(), which can support decoding JPEG/PNG
through the help of HiiImageDecoder protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
1. Update GetImageIdOrAddress() to recognize PNG/JPEG image block.
A offset calculation bug was fixed.
2. Update HiiGetImage() comments to say PNG/JPEG support is provided
by HiiImageEx
3. Update HiiSetImage() to support replacing a PNG/JPEG image block
with a new image
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
The previous DNS server data will be retained after the policy
changes from Dhcp to Static. This patch is used to clean the
previous dhcp configuration data.
Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Cc: Subramanian Sriram <sriram-s@hpe.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
The 'universal' PCI bus driver in MdeModulePkg contains a quirk to
degrade 64-bit PCI MMIO BARs to 32-bit in the presence of an option
ROM on the same PCI controller.
This quirk is highly specific to not just the X64 architecture in general,
but to the PC platform in particular, given that only X64 platforms that
require legacy PC BIOS compatibility require it. However, making the
quirk dependent on the presence of the legacy BIOS protocol met with
resistance, due to the fact that it introduces a dependency on the
IntelFrameworkModulePkg package.
So instead, make the quirk configurable, by introducing a feature flag PCD
'PcdPciDegradeResourceForOptionRom' which defaults to TRUE only for X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Some XHCI host controllers require to have extra 1ms delay before
accessing any MMIO register during HC reset.
As this delay is not defined by XHCI spec, we use this workaround
to fix the issue.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Some XHCI host controllers require to have extra 1ms delay before
accessing any MMIO register during HC reset.
As this delay is not defined by XHCI spec, we use this workaround
to fix the issue.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
To follow PI1.4a, BaseTools has be updated to fix artificial limitation of
SkuId range.
This patch is to update PCD database structure definition to match BaseTools.
Note: The source code and BaseTools need to be upgraded at the same time,
and if they are not upgraded at the same time, build error like below will
be triggered to help user identify the problem.
"Please make sure the version of PCD PEIM Service and the generated
PCD PEI Database match."
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is to fix the incorrect logic when handling the "&READONLY" tag
in <KeywordResp>.
1. In UEFI spec, the "&READONLY" tag is in upper case, but using the lower
case in current codes by mistake.
2. The logic in checking the ReadOnly flag is not correct. Whether having
"&READONLY" tag must be consistent with the result of
"ExtractReadOnlyFromOpCode" function.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
For a question, its question id can not be zero.
This patch is to fix the issue that using zero as question id.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, the EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute is completely
ignored by the PCI host bridge driver, which means that, on an implementation
that supports DMA above 4 GB, allocations above 4 GB may be provided to
devices that have not expressed support for it.
So in addition to checking 'RootBridge->DmaAbove4G' to establish whether the
root bridge itself supports DMA above 4 GB, we must also take into account
the operation type (EfiPciOperationBusMaster{Read|Write|CommonBuffer}64),
and the EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute, when mapping and
allocating DMA memory, respectively.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
The IP address should not be treated as classful one if DHCP options
contain a classless IP with its true subnet mask. Otherwise, DHCPv4
TransmitReceive() will failed. This real subnet mask will be parsed
and recorded in DhcpSb->Netmask. So, we need check it before get the
IP's corresponding subnet mask.
Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Since current codes in NvmExpressDxe already support the non-blocking I/O
feature for EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface, the relative bit
in the 'Attributes' field of EFI_NVM_EXPRESS_PASS_THRU_MODE should be set
to reflect this.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This commit fixes the issue that the caller event passed to
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.PassThru() will not be signaled for
NVME Admin commands.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec, EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.PassThru()
should return EFI_INVALID_PARAMETER if the input 'NamespaceId' is invalid
for the NVM Express controller. This commit adds check in PassThru() to
follow this rule.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This commit adds serveral checks for the 'Packet' parameter passed to the
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.PassThru() API:
The check for the 'TransferLength' field in
EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET to make sure the value will not
exceed the maximum data transfer size allowed by a controller.
The check for the 'TransferBuffer' and 'TransferLength' fields in
EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET when the Opcode of an NVME
command indicates a data transfer between controller and host.
The check for the 'MetadataLength' field in
EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET to make sure the value is not 0
when the corresponding 'MetadataBuffer' field has a non-NULL value.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to UEFI spec, an EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL with neither
EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL nor
EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL set in the Attributes field
is an illegal configuration.
This commit adds this check in the PassThru API to follow the spec.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec, the 'TransferBuffer' and 'MetadataBuffer' used
in a data transfer should be aligned on the boundary specified by the
IoAlign field in the EFI_NVM_EXPRESS_PASS_THRU_MODE structure.
This commit adds this check to follow the spec.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec,
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNextNamespace() should return
EFI_NOT_FOUND when the value pointed to by NamespaceId is the namespace ID
of the last namespace on the NVM Express controller. This commit modifies
the check for NamespaceId to follow this rule.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec,
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNamespace() should return
EFI_NOT_FOUND when the input DevicePath is a device path node type that
the NVM Express Pass Thru driver supports, but there is not a valid
translation from DevicePath to a namespace ID. Current code will return
EFI_SUCCESS. This commit adds additional check in the GetNameSpace API to
make sure correct status is returned.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
According to the UEFI spec,
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath() should return
EFI_NOT_FOUND when the input NamespaceId is not valid. However, current
code returns EFI_DEVICE_ERROR instead. This commit modifies the check for
input NamespaceId to return the correct status.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The gBS->OpenProtocol() calls to open EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL
in NvmExpress.c will crash the data in 'Mode' field of
'Private->Passthru'.
The third parameter of gBS->OpenProtocol() is an output parameter that
stores the address where a pointer to the corresponding Protocol
Interface. The current code mistakenly pass '&Private->Passthru' (a
pointer of the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL) as the third
parameter. This will crash the data in 'Mode' filed.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Support multiple PCI segment for PCI_CONFIG2 opcodes.
PiDxeS3BootScriptLib needs to be updated to consume PciSegmentLib
instead of PciLib. That means platforms need to add PciSegmentLib
declaration like below in platform dsc if the PciSegmentLib was
not declared in platform dsc before.
PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
For platforms only have one segment,
MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf is recommended
to be used and declared in platform dsc for PiDxeS3BootScriptLib to have
equivalent functionality with before.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
BootManagerMenu boot option is handled by EfiBootManagerGetBootManagerMenu.
Don't need to handle it again when parse LoadFile protocol.
In V2, use "BootManagerMenu" instead of "BootMenuApp".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Rename local function name BootMenuApp to BootManagerMenu to align to
other public function name.
In V2, use "BootManagerMenu" instead of "BootMenuApp".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The prototypes of EbcInterpret() and ExecuteEbcImageEntryPoint() are
private to the AARCH64 implementation of EbcDxe, so we can shuffle
the arguments around a bit and make the assembler thunking glue a lot
simpler.
For ExecuteEbcImageEntryPoint(), this involves passing the EntryPoint
argument as the third parameter, rather than the first, which allows
us to do a tail call. For EbcInterpret(), instead of copying each
argument beyond #8 from one native stack frame to the next (before
another copy is made into the VM stack), pass a pointer to the
argument stack.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Instead of pessimistically copying at least 64 bytes from the VM stack
to the native stack, and popping off the register arguments again
before doing the native call, try to avoid touching the stack completely
if the VM stack frame is <= 64 bytes. Also, if the stack frame does exceed
64 bytes, there is no need to copy the first 64 bytes, since we are passing
those in registers anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The thunk generation is needlessly complex, given that it attempts to
deal with variable length instructions, which don't exist on AArch64.
So replace it with a simple template coded in assembler, with a matching
struct definition in C. That way, we can create and manipulate the thunks
easily without looping over the instructions looking for 'magic' numbers.
Also, use x16 rather than x9, since it is the architectural register to
use for thunks/veneers.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Change to consistent // style comments. Also, remove bogus global
definitions for external functions, and move the real exports to
the top of the file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
UEFI spec:
Each load option entry resides in a Boot####, Driver####, SysPrep####,
OsRecovery#### or PlatformRecovery#### variable where #### is replaced
by a unique option number in printable hexadecimal representation using
the digits 0-9, and the upper case versions of the characters A-F
(0000-FFFF).
The patch also makes L"HwErrRec####" follow this rule.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Instead of comparing a GUID with gZeroGuid via the CompareGuid API, the
commit uses the IsZeroGuid API to check if the given GUID is a zero GUID.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
If a FQDN contains 3 dots '.' like "a.b.c.com", the AsciiStrToIp4
will return success as the HostName has a valid IP address. So we
need to check if it is a decimal character before using AsciiStrDecimalToUintn.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
We have added a new policy to get default value for question:
get default from other default id if current default is not specified.
But when getting default value for checkbox, if the default
flag is not set, it will set the default value to FALSE for checkbox.
This behavior in checkbox conflicts with the new added policy,
so now we move this behavior to the end of getting default form other
default id.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
IpSb->Reconfig should not be set to TRUE to focal the reconfiguration
during the policy changes from Static to DHCP. It's redundancy because
the default router table and default addresses have been freed ahead (
Detailed see Ip4Config2OnPolicyChanged() function). Otherwise, the
potential failure will appear if UseDefaultAddress configured. Reproduce
steps see below:
#1. Set policy to DHCP.
#2. If DHCP process is not complete yet, then run one APP to invoke UDP4
Configure with "UseDefaultAddress = TRUE" (loop to call UDP4 Configure
until Ip4Mode.IsConfigured changes to TRUE).
#3. Even DHCP succeed but Ip4Mode.IsConfigured flag never set to TRUE
Concrete analysis is as follows:
In #1, the policy will be set to DHCP, and then Ip4Config2OnPolicyChanged()
will be called. In this function, if "IpSb->Reconfig" flag is set to TRUE,
the original "IpSb->DefaultInterface" will be abandoned/freed once the
DHCP process finished.
In #2, UDP4 Configure with "UseDefaultAddress = TRUE" is called, that means
the default interface (IpSb->DefaultInterface) will be selected as current
instance's interface.
In #3, when DHCP process finished, the original DefaultInterface will be
abandoned/freed because "IpSb->Reconfig" flag is true. Meanwhile, one new
interface is assigned to "IpSb->DefaultInterface". This new interface is
different to the original one assigned to the UDP4 Configured instance. So,
even DHCP process succeed, the up caller will never have the chance to get
it's truly status.
Cc: Cohen Eugene <eugene@hp.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch is to enhance SetupBrowser to handle following two cases:
1. When searching BlockName in AltResp, the hex digits of related BlockName
in AltResp may be in uppercase.
2. When converting the Value in AltResp to HiiValue, the length of value
string is bigger than the length of StorageWidth of the question.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When comparing the L"OFFSET=" with the ConfigResp string to find
all the "OFFSET=" in ConfigResp, should skip the character "&"
before "OFFSET=" in ConfigResp string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in SetupBrowser.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add a new implementation policy of getting default value in HiiDatabase.
The new policy is only for the situation that a question has default
value but doesn't have default value for all supported default type.
In this case, we will choose the smallest default id from the existing
defaults, and share its value to other default id which has no
default value.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
The retry mechanism will bring issue if the usb device is unplugged
from XHCI HC but s/w is trying to access it through BlockIo. The
current cmd will get device error return status, but the sequential
cmds will be timeout. This behavior will cause system unresponsive
for a long while and bring bad user experience.
So we break the retry loop if found device error.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
The original code will assert when dealing with those empty FVs.
The fix is used to solve this bug.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
This driver searches APPLICATION in FV and installs LoadFile protocol
for every found one. Then, BDS will add BootOption for LoadFile protocol.
It provides the generic way to expose boot option for the internal
application, such as Shell. With this driver, PlatformBds doesn?t need
to specially handle Shell application.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Update boot description to support LoadFile protocol based on FV file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
New LoadFileOnFv2 driver will install LoadFile protocol based on FV file.
Update UefiBootManagerLib to find BootMenuApp with LoadFile protocol.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
This function abstracts the common logic to find BootMenuApp file.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
The last TRB in transfer ring is a LINK type TRB, which shouldn't
be accounted as a valid item in IsAsyncIntTrb().
Without this fix, the original algo will bring issue on those URBs
whose TRBs crosses the transfer ring.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This change is used to remove the port status polling in port reset
functions.
Why it's needed is because:
1) The same polling on same port has taken place prior to this removed
one. See UsbEnumeratePort()->GetPortStatus(). So this polling in
UsbEnumerateNewDev()->ResetPort() is redundant.
2) EDKII Xhci driver hooks all GetPortStatus() operations. If we don't
remove this one, XHCI driver's XhcPollPortStatusChange() may enter twice
in reset process and wrongly think the device is unplugged.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The Host Controller reset has been done at EDKII UHCI/EHCI/XHCI, The
original code will do twice host controller initialization which is
unnecessary. It also bring issues on some USB HCs.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit will scan all the EFI raw section instances within the
module's FV to make sure the NVDIMM root device SSDT can be properly
located.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
> cc1: warnings being treated as errors
> MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c:
> In function 'GetProposedResources':
> MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c:1388:
> error: integer constant is too large for 'long' type
Append a ULL suffix to the replacement text of PCI_RESOURCE_LESS that is
aligned with the style of the EFI_RESOURCE_SATISFIED and
EFI_RESOURCE_NOT_SATISFIED macros.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ard Biesheuvel
Song, BinX
Dandan Bi
Jiaxin Wu
Star Zeng
Suman Prakash
Laszlo Ersek
Ruiyu Ni
Zhang Lubo
Jiewen Yao
Feng Tian
Hao Wu
Zhang, Chao B
Fu Siyuan
Leo Duran
Liming Gao
Thomas Huth
Haojian Zhuang
Michael Kinney
Pete Batard
Marcin Wojtas
Jeff Fan
Eric Dong
Cinnamon Shia
Gary Lin
Brian J. Johnson
Leif Lindholm
Jeff Brasen
Marvin Haeuser