https://bugzilla.tianocore.org/show_bug.cgi?id=1796
Bug fixed in PciBusDxe\PciLib.c.
Removed the redundant second call to PciSearchDevice sub-routine when the
PCD for the Hot-Plug support is disabled.
Signed-off-by: Ashraf Javeed <Ashraf.javeed@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1882
Implement support for GetOperatingParamters notify phase
in SdMmcHcDxe driver. GetOperatingParameters notify phase
is signaled before we start card detection and initialization.
Code has been updated for both eMMC and SD card controllers to
take into consideration those new parameters. Initialization process
has been divided into 2 steps. In the first step we bring the link
up to the point where we can get card identification data(Extended
CSD in eMMC case and SWITCH command response in SD card case). This
data is later used along with controller capabilities and operating
parameters passed in GetOperatingParameters phase to choose preferred
bus settings in GetTargetBusSettings function. Those settings are later
on to start bus training to high speeds. If user passes incompatible
setting with selected bus timing driver will assume it's standard behavior
with respect to that setting. For instance if HS400 has been selected as a
target bus timing due to card and controller support bus width setting of
4 and 1 bit won't be respected and 8 bit setting will be chosen instead.
Tests on Marvell boards were also performed by Marcin Wojtas
<mw@semihalf.com>:
https://edk2.groups.io/g/devel/message/42999
Board 1 (out of tree): SD - OK, MMC - OK
Board 2: (Armada80x0McBin): SD - OK, MMC - OK
Board 3: (Armada70x0Db): SD - problems, MMC - OK
Please note that the problem on Armada70x0Db SD devices are introduced by
adding new types of SD bus modes, a subsequent patch within edk2-platforms
repository will be proposed to address it.
(More details can be referred from the above link.)
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Regression-tested-by: Sumit Garg <sumit.garg@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add codes to produce the NVM Express PassThru PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
When assigning a physical PCIe device to a QEMU/KVM guest, PciBusDxe may
find that the extended config space is not (fully) implemented. In
LocatePciExpressCapabilityRegBlock(), "CapabilityEntry" may be read as
0xFFFF_FFFF at a given config space offset, after which the loop gets
stuck spinning on offset 0xFFC (the read at offset 0xFFC returns
0xFFFF_FFFF most likely as well).
Another scenario (not related to virtualization) for triggering the above
is when a Conventional PCI bus -- exposed by a PCIe-to-PCI bridge in the
topology -- intervenes between a PCI Express Root Port and a PCI Express
Endpoint. The Conventional PCI bus limits the accessible config space of
the PCI Express Endpoint, even though the endpoint advertizes the PCI
Express capability. Here's a diagram, courtesy of Alex Williamson:
[PCIe Root Port]--[PCIe-to-PCI]--[PCI-to-PCIe]--[PCIe EP]
->| |<- Conventional PCI bus
Catch reads of 0xFFFF_FFFF in LocatePciExpressCapabilityRegBlock(), and
break out of the scan with a warning message. The function will return
EFI_NOT_FOUND.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
DEPEX from PEI storage stack.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1777
BootInRecoveryMode Ppi dependency should be removed from PEI storage stack
drivers. Besides recovery, more features are using the storage stack.
Platform can apply Ppi dependency in Recovery FV which contains full
storage driver stack. Platform storage stack modules, such as host
controller init PEI module, should also remove this dependency.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not. So change the comments of NvmeShutdownAllControllers.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Delete the explicit machine type check for option ROM images, and instead,
rely on the LoadImage() boot service to decide whether an option ROM can
be dispatched or not. This permits platforms to ship with emulators to
execute option ROMs that are not native to the processor architecture.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Driver was supporting only 32b DMA support for V3 controllers. Add
support for 64b DMA as well for completeness.
For V4.0 64b support, driver was looking at incorrect capability
register bit. Fix for that is present as well.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1583
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will update the driver to
consume the S3StorageDeviceInitList LockBox in S3 phase. The purpose is to
perform an on-demand (partial) NVM Express device
enumeration/initialization to benefit the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will add codes to produce the
Storage Security Command PPI if the underlying NVM Express controller
supports the Security Send and Security Receive commands.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.
Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1537
Use 16-bit and 32-bit IO widths for SDMMC MMIO to prevent all register
accesses from being split up into 8-bit accesses.
The SDHCI specification states that the registers shall be accessible in
byte, word, and double word accesses. (SD Host Controller Simplified
Specification 4.20 Section 1.2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
In eMMC HS400 switch sequence flow eMMC driver attempted
to execute SEND_STATUS just after switching bus timing to high
speed and before downgrading clock frequency to 52MHz. Since link
was at that time in incorrect state SEND_STATUS was failing which
made driver think switch to HS400 failed.
This change makes driver always change clock frequency after
switching bus timing and before executing SEND_STATUS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Albecki Mateusz <mateusz.albecki@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505
When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.
The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.
This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Per PCI Spec, the option ROM BAR is 32bit so the maximum option ROM
size can be hold by UINT32 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1408
According to the information of the above BZ-1408 and other platform
owners, NVM Express devices are becoming more likely to be a critical
part during the boot process.
This commit will add the calls to 'REPORT_STATUS_CODE' when there is a
failure happens during the NVM Express controller/device initialization
process.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1441
This commit will update the file-level comments within the SdMmcPciHcDxe
to reflect the latest specification compliance status of the driver.
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1422
if (Attributes) {
if ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0) {
return EFI_UNSUPPORTED;
}
}
In above code block,
"If ((Attributes & (~(DEV_SUPPORTED_ATTRIBUTES))) != 0)" is TRUE,
the Attributes must be not 0. So we can remove the redundant
check "if (Attributes)".
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1425
This commit will resolve the VS2015 IA32 NOOPT build failure within
SdMmcPciHcDxe.
More specifically, this commit will use BaseLib API RShiftU64() to perform
right-shift operations for UINT64 type operators.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Add SDMA, ADMA2 and 26b data length support.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
SDMA registers supporting 64 bit addresses.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
ADMA descriptors supporting 64 bit addresses.
If host controller version is above V4.0, enable ADMA2 with 26b data
length support for better performance. HC 2 register is configured to
use 26 bit data lengths and ADMA2 descriptors are configured appropriately.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1359
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1394
When there is no PCI option ROM exists, today's logic still creates
virtual BAR for option ROM using Length = 0, Alignment = (-1).
It causes the final MEM32 alignment requirement is as big as
0xFFFFFFFF_FFFFFFFF.
The patch fixes this issue by only creating virtual BAR for option
ROM when there is PCI option ROM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chiu Chasel <chasel.chiu@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1376
Today's implementation reuses the 32bit MMIO resource requested by
all PCI devices MMIO BARs when shadowing the option ROM.
Take a simple example, a system has only one PCI device. It requires
8MB 32bit MMIO and contains a 4MB option ROM. Today's implementation
only requests 8MB (max of 4M and 8M) 32bit MMIO from
PciHostBridgeResourceAllocation protocol. Let's assume the MMIO range
[3GB, 3GB+8MB) is allocated. The 3GB base address is firstly
programmed to the option ROM BAR for option ROM shadow. Then the
option ROM decoding is turned off and 3GB base address is programmed
to the 32bit MMIO BAR.
It doesn't cause issues when the device doesn't request too much
MMIO.
But when the device contains a 64bit MMIO BAR which requests 4GB MMIO
and a 4MB option ROM. Let's assume [3GB, 3GB+8MB) 32bit MMIO range is
allocated for the option ROM. When the option ROM is being shadowed,
64bit MMIO BAR is programmed to value 0, which means [0, 4GB) MMIO is
given to the 64bit BAR.
The range overlaps with the option ROM range which may cause the
device malfunction (e.g.: option ROM cannot be read out) when the
device has two separate decoders: one for MMIO BAR, the other for
option ROM.
The patch requests dedicated MEM32 resource for Option ROMs and
moves the Option ROM shadow logic after all MMIO BARs are programmed.
The MMIO BAR setting to 0 when shadowing Option ROM is also skipped
because the MMIO BAR already contains the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq
field value of the Capability Register 1 is zero, the clock
frequency must be obtained via another method.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255MHz.
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
This patch also adds new IN OUT BaseClockFreq field
in the Capability callback of the SdMmcOverride,
protocol which allows to update BaseClkFreq value.
The patch reuses original commit from edk2-platforms:
20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock
frequency")
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controlers need to do additional operations after clock
frequency switch.
This patch add new callback type to NotifyPhase of the SdMmcOverride
protocol. It is called after SdMmcHcClockSupply.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controllers use different values in Host Control 2 Register
to select UHS Mode. This patch adds a new UhsSignaling type routine to
the NotifyPhase of the SdMmcOverride protocol.
UHS signaling configuration is moved to a common, default routine
(SdMmcHcUhsSignaling). After it is executed, the protocol producer
can override the values if needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In order to ensure bigger flexibility in the NotifyPhase
routine of the SdMmcOverride protocol, enable using an
optional phase-specific data. This will allow to exchange
more information between the protocol producer driver
and SdMmcPciHcDxe in the newly added callbacks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
The fix is similar to commit ebb6c7633b.
We found that a similar fix should be applied to the NVMe PEI driver as
well. Hence, this one is for the PEI counterpart driver.
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the
EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET structure to address this
issue.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
There is concern at the thread
https://lists.01.org/pipermail/edk2-devel/2018-November/031951.html.
And the time point is a little sensitive as it is near edk2-stable201811.
This reverts commit 7779209971.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
There is concern at the thread
https://lists.01.org/pipermail/edk2-devel/2018-November/031951.html.
And the time point is a little sensitive as it is near edk2-stable201811.
This reverts commit 0cd6452503.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, EhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
EhcMonitorAsyncRequests
EhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for EhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Call XhcFreeUrb after XhcCreateTransferTrb fails in XhcCreateTrb.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
In current code, XhcMonitorAsyncRequests (timer handler) will do
unmap and map operations for AsyncIntTransfers to "Flush data from
PCI controller specific address to mapped system memory address".
XhcMonitorAsyncRequests
XhcFlushAsyncIntMap
PciIo->Unmap
IoMmu->SetAttribute
PciIo->Map
IoMmu->SetAttribute
This may impact the boot performance.
Since the data buffer for XhcMonitorAsyncRequests is internal
buffer, we can allocate common buffer by PciIo->AllocateBuffer
and map the buffer with EfiPciIoOperationBusMasterCommonBuffer,
then the unmap and map operations can be removed.
///
/// Provides both read and write access to system memory by
/// both the processor and a bus master. The buffer is coherent
/// from both the processor's and the bus master's point of view.
///
EfiPciIoOperationBusMasterCommonBuffer,
Test done:
USB KB works normally.
USB disk read/write works normally.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Match function parameter name and description between
EhciSched.c and EhciSched.h.
V2:
Add the missing "gBS->FreePool (Data);".
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
Extract new EhciInsertAsyncIntTransfer function from
EhcAsyncInterruptTransfer.
It is code preparation for following patch,
no essential functional change.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
V3:
Match function parameter name and description between
XhciSched.c and XhciSched.h.
V2:
Add the missing "FreePool (Data);".
Remove the unnecessary indentation change.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1274
Extract new XhciInsertAsyncIntTransfer function from
XhcAsyncInterruptTransfer.
It is code preparation for following patch,
no essential functional change.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1260
For the PassThru() service of NVM Express Pass Through Protocol, the
current implementation (function NvmExpressPassThru()) will only use the
IO Completion/Submission queues created internally by this driver during
the controller initialization process. Any other IO queues created will
not be consumed.
So the value is little to accept external IO Completion/Submission queue
creation request. This commit will refine the behavior of function
NvmExpressPassThru(), it will only accept driver internal IO queue
creation commands and will return "EFI_UNSUPPORTED" for external ones.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1259
According to the the NVM Express spec Revision 1.1, for some commands,
command-related information will be stored in the Dword 0 of the
completion queue entry.
One case is for the Get Features Command (Section 5.9.2 of the spec),
Dword 0 of the completion queue entry may contain feature information.
Hence, this commit will always copy the content of completion queue entry
to the PassThru packet regardless of the execution result of the command.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1142
According to the the NVM Express spec Revision 1.1, for some commands
(like Get/Set Feature Command, Figure 89 & 90 of the spec), the Memory
Buffer maybe optional although the command opcode indicates there is a
data transfer between host & controller (Get/Set Feature Command, Figure
38 of the spec).
Hence, this commit refine the checks for the 'TransferLength' and
'TransferBuffer' field of the EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
structure to address this issue.
Cc: Liangcheng Tang <liangcheng.tang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1267
The value 5 Port Speed field of PORTSC is new defined in
XHCI 1.1 spec November 2017.
This patch updates XhciDxe and XhciPei to handle it, otherwise
the USB 3.1 device may not be recognized with the XHCI controller
following XHCI 1.1 spec November 2017.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Current hard code Usb2Hc.XXXRevision may be not accurate.
This patch updates code to assign Usb2Hc.XXXRevision based on
SBRN (Serial Bus Release Number, PCI configuration space offset
0x60) although there is no code consuming them.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Clock control is similar in SDHCI versions greater then version 2. Add
support for more recent versions of the controller specification.
SD card support for 1.8V is also present in controller versions 3 and
greater.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Add SDHCI controller defines, this is useful as the version in the
register does not explictly map to a specification version. For example
vesion 4.10 of the specification is version 0x04.
https://bugzilla.tianocore.org/show_bug.cgi?id=1233
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Currently, the implementation of EFI_PCI_IO_PROTOCOL::GetLocation()
in NonDiscoverablePciDeviceDxe returns the same set of dummy values
for each instance of the NON_DISCOVERABLE_DEVICE protocol that it
attaches itself to. However, this turns out to be causing problems
in cases where software (such as the ARM Compliance Test Suite [ACS])
attempts to use these values to uniquely identify controllers, since
the collisions create ambiguity in this regard.
So let's modify GetLocation() to return an arbitrary bus/device tuple
on segment 0xff instead. This is guaranteed not to clash with other
non-discoverable PCI devices, and highly unlikely to clash with real
PCIe devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The change doesn't have functionality impact.
It just renames the mIoMmuProtocol to mIoMmu and moves the
declaration from PciRootBridgeIo.c to PciHostBridge.h.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1196
RootBridgeIoCheckParameter() verifies that the requested MMIO access
can fit in any of the MEM/PMEM 32/64 ranges. But today's logic
somehow only checks the requested access against MEM 32/64 ranges.
It should also check the requested access against PMEM 32/64 ranges.
The patch fixes this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Javeed, Ashraf
Albecki, Mateusz
Maggie Chu
Laszlo Ersek
xuwei6
Zhichao Gao
Ard Biesheuvel
Michael D Kinney
Ashish Singhal
Hao Wu
Edgar Handal
Albecki, Mateusz
Ray Ni
Sean Brogan
Dandan Bi
Ruiyu Ni
Vladimir Olovyannikov
Marcin Wojtas
Tomasz Michalec
Star Zeng
Jeff Brasen