This patch a adds new terminal type, TtyTerm, to TerminalDxe. This terminal
type provides a place to add support for various *nix terminals that don't
behave like standard VT terminals. The goal is to 'just work' with as many
terminals as possible, rather than properly emulating any one specific
terminal.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17895 6f19259b-4bc3-4df7-8a09-765794883524
UEFI spec has clear description below:
Configuration Table Groups
The GUID for a configuration table also defines a corresponding event group GUID with the same value.
If the data represented by a configuration table is changed,
InstallConfigurationTable() should be called.
When InstallConfigurationTable() is called, the corresponding event is signaled.
When this event is signaled,
any components that cache information from the configuration table can optionally update their cached state.
For example, EFI_ACPI_TABLE_GUID defines a configuration table for ACPI data.
When ACPI data is changed, InstallConfigurationTable() is called.
During the execution of InstallConfigurationTable(),
a corresponding event group with EFI_ACPI_TABLE_GUID is signaled,
allowing an application to invalidate any cached ACPI data.
But current implementation only InstallConfigurationTable() at first time ACPI data change.
if (((Version & EFI_ACPI_TABLE_VERSION_1_0B) != 0) &&
!AcpiTableInstance->TablesInstalled1) {
Status = gBS->InstallConfigurationTable (&gEfiAcpi10TableGuid, AcpiTableInstance->Rsdp1);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled1 = TRUE;
}
if (((Version & ACPI_TABLE_VERSION_GTE_2_0) != 0) &&
!AcpiTableInstance->TablesInstalled3) {
Status = gBS->InstallConfigurationTable (&gEfiAcpiTableGuid, AcpiTableInstance->Rsdp3);
if (EFI_ERROR (Status)) {
return EFI_ABORTED;
}
AcpiTableInstance->TablesInstalled3= TRUE;
}
The AcpiTableInstance->TablesInstalled1 and AcpiTableInstance->TablesInstalled3 conditional judgment need to be removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17885 6f19259b-4bc3-4df7-8a09-765794883524
Safe string functions may ASSERT when the source length is larger than the MaxDest. This patch use Strn**S to indicate the copy length.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17867 6f19259b-4bc3-4df7-8a09-765794883524
The call in ProbeMediaStatus() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
In addition to avoiding the crash, that way, the media probe does not
depend anymore on the way the EFI_DISK_IO_PROTOCOL implementation deals
with a NULL value of the destination buffer pointer as the UEFI
specification does not specify the expected behaviour.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <Ronald.Cron@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17859 6f19259b-4bc3-4df7-8a09-765794883524
This patch add the header file and DXE implementation for the HttpLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17856 6f19259b-4bc3-4df7-8a09-765794883524
and also add new UI configuration support in Ip4Dxe driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17853 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg has defined gZeroGuid in 'Guid/ZeroGuid.h', therefore, the
mZeroGuid defined in Universal/Variable/RuntimeDxe is redundant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17840 6f19259b-4bc3-4df7-8a09-765794883524
MdeModulePkg has defined gZeroGuid in 'Guid/ZeroGuid.h', therefore, the
gZeroGuid defined in SetupBrowserDxe is redundant.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17839 6f19259b-4bc3-4df7-8a09-765794883524
GCD Range is byte address. EFI memory range is page address. To make sure
GCD range is converted to EFI memory range, the following things are added:
1. Merge adjacent GCD range first.
2. Add ASSERT check on GCD range alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17813 6f19259b-4bc3-4df7-8a09-765794883524
The splitting of memory regions into code and data regions violates
architecture specific alignment rules by using a fixed alignment
of 4 KB. Replace it with EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT,
which is defined appropriately on each architecture.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Jaben Carsey" <jaben.carsey@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17812 6f19259b-4bc3-4df7-8a09-765794883524
Move the definitions of EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT and
DEFAULT_PAGE_ALLOCATION to DxeMain.h to make them available explicitly
to all parts of DxeCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17811 6f19259b-4bc3-4df7-8a09-765794883524
This removes the functions RevertRuntimeMemoryMap () and
DumpMemoryMap () which are not referenced anywhere in the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17808 6f19259b-4bc3-4df7-8a09-765794883524
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource
information, the BootURI device path node will be updated to include
the BootURI information. It means the device path on the child handle
will be updated after the LoadFile() service is called.
To handle this case, DxeCore LoadImage() service is updated as the below:
1) Get Device handle based on Device Path
2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer.
3) Retrieve DevicePath from Device handle
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17799 6f19259b-4bc3-4df7-8a09-765794883524
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource
information, the BootURI device path node will be updated to include
the BootURI information. It means the device path on the child handle
will be updated after the LoadFile() service is called.
To handle this case, UefiBootManagerLib BmGetLoadOptionBuffer API
is updated as the below:
1) Get Device handle based on Device Path
2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer.
3) Retrieve DevicePath from Device handle
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17798 6f19259b-4bc3-4df7-8a09-765794883524
UEFI Spec HTTP Boot Device Path, after retrieving the boot resource
information, the BootURI device path node will be updated to include
the BootURI information. It means the device path on the child handle
will be updated after the LoadFile() service is called.
To handle this case, SecurityManagementLib ExecuteSecurityHandlers API
is updated as the below:
1) Get Device handle based on Device Path
2) Call LoadFile() service (GetFileBufferByFilePath() API) to get Load File Buffer.
3) Retrieve DevicePath from Device handle
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17797 6f19259b-4bc3-4df7-8a09-765794883524
1. When Property->Attributes == 0, don't check input Attributes.
2. Enhance comments to be indent aligned and debug message
to be aligned with other messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17794 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge from Auth Variable driver in SecurityPkg to Variable drive in
MdeModulePkg. Then the merged Variable driver in MdeModulePkg will
link to AuthVariableLib and TpmMeasurementLib.
AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg
could be used for non auth variable support.
AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg
may be used for auth variable support.
Why to do:
1. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. Now it is to
merge them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17765 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add AuthVariableLib LibraryClass definitions.
2. Implement a NULL AuthVariableLib library instance.
3. Add VARIABLE_ENTRY_PROPERTY definition to VarCheck.h.
4. Add VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h.
Why to do:
1. Share code.
1.1. Separate auth variable service from Auth Variable driver in
SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
1.2 The VARIABLE_ENTRY_PROPERTY definition to VarCheck.h,
VARIABLE_ENTRY_CONSISTENCY and variable attribute
combinations definitions to VariableFormat.h will be shared
by merged Variable driver and AuthVariableLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17757 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge from VariablePei in SecurityPkg to VariablePei in MdeModulePkg.
Why to do:
1. Remove code duplication and reduce maintenance effort.
The code logic of VariablePei in SecurityPkg is same with VariablePei
in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17756 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Merge VariableInfo in SecurityPkg to VariableInfo in MdeModulePkg.
Why to do:
1. Remove code duplication and reduce maintenance effort.
The functionality of VariableInfo in SecurityPkg has covered VariableInfo
in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17755 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Move authenticated variable definition from AuthenticatedVariableFormat.h
to VariableFormat.h with gEfiAuthenticatedVariableGuid and
AUTHENTICATED_VARIABLE_HEADER.
Why to do:
1. Share code.
We are moving forward to separate auth variable service from Auth Variable
driver in SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
2. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. We are going to
merge them.
3. gEfiAuthenticatedVariableGuid will be used by both merged Variable driver
and AuthVariableLib, AUTHENTICATED_VARIABLE_HEADER will be used by
merged Variable driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17754 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Move TpmMeasurementLib LibraryClass from SecurityPkg to MdeModulePkg.
2. Implement a NULL TpmMeasurementLib library instance.
Why to do:
1. Share code.
We are moving forward to separate auth variable service from Auth Variable
driver in SecurityPkg to AuthVariableLib. Then the AuthVariableLib could benefit
and be used by different implementation of Auth Variable drivers.
2. Remove code duplication and reduce maintenance effort.
After auth variable service separated from Auth Variable driver in SecurityPkg
to AuthVariableLib. The remaining code logic of Auth Variable driver in SecurityPkg
will be almost same with Variable driver in MdeModulePkg. We are going to
merge them.
3. TpmMeasurementLib is consumed by Auth Variable driver in SecurityPkg now,
as Auth Variable driver in SecurityPkg will be merged to Variable driver in
MdeModulePkg, so the library class also needs to be moved to MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17753 6f19259b-4bc3-4df7-8a09-765794883524
The TPer Reset operation would be moved into SecurityPkg/Tcg/
MemoryOverwriteControl/TcgMor.inf module and be triggered at EndOfDxe.
By this way, all encrypted drives which produce EFI_STORAGE_SECURITY_
RPOTOCOL interface would be force reset when MOR is set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17717 6f19259b-4bc3-4df7-8a09-765794883524
Child FV may be placed in parent FV image without process required. Then,
Child FV and parent FV will be in the same continuous space. For FileHandle,
FileHandleToVolume() function needs to find the best matched FV handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17704 6f19259b-4bc3-4df7-8a09-765794883524
UEFI2.5 spec, GetMemoryMap(), says:
Attribute: Attributes of the memory region that describe the bit mask
of capabilities for that memory region, and not necessarily the current
settings for that memory region.
But, GetMemoryMap() implementation doesn't append memory capabilities
for MMIO and Reserved memory range. This will break UEFI2.5 Properties
Table feature, because Properties Table need return EFI_MEMORY_RO or
EFI_MEMORY_XP capabilities for OS.
This patch appends memory capabilities for those memory range.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17703 6f19259b-4bc3-4df7-8a09-765794883524
Per PI spec all allocation of SMRAM should use EfiRuntimeServicesCode or EfiRuntimeServicesData.
So SMM instance use EfiRuntimeServicesCode as the default memory allocation type instead of EfiBootServicesData.
This patch clarify this usage in comments.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17667 6f19259b-4bc3-4df7-8a09-765794883524
in function scope that are assigned but never used afterwards.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17664 6f19259b-4bc3-4df7-8a09-765794883524
to MdeModulePkg/Include/Protocol.
They were committed into root directory by mistake at R17657.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17660 6f19259b-4bc3-4df7-8a09-765794883524
And also SMM Ready To Boot.
The SMM Exit Boot Service protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_EXIT_BOOT_SERVICES
to notify SMM driver that system enter exit boot services.
The SMM Legacy Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_LEGACY_BOOT_GUID
to notify SMM driver that system enter legacy boot.
The SMM Ready To Boot protocol is to be published by the SMM
Foundation code to associate with EFI_EVENT_GROUP_READY_TO_BOOT
to notify SMM driver that system enter ready to boot.
After them, any SMM drivers can get protocol notify on what happened
in DXE phase, then there is no need to let each individual SMM driver
to register SMM Communication Handler for that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17657 6f19259b-4bc3-4df7-8a09-765794883524
System hangs when RTC time rollover 1999 to 2000
Error processing of GetTime function:
If get time fail,the date/time will display ??,
and update help info to let user know get time fail.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17651 6f19259b-4bc3-4df7-8a09-765794883524
Produce this protocol for each namespace at NVMe controller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17638 6f19259b-4bc3-4df7-8a09-765794883524
Open NVM_EXPRESS_PASS_THRU rather than PCI_IO to create parent-child
relationship.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tian Feng <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17636 6f19259b-4bc3-4df7-8a09-765794883524
VariableLock in VariableSmmRuntimeDxe.c is installed in EntryPoint now.
It works based on SMM variable handler by SMM communication with
payload buffer. But the payload buffer and SMM variable handler will
be not ready in EntryPoint before SmmVariableReady() call back.
VarCheck in VariableSmmRuntimeDxe.c has the same issue,
so move VarCheck install into SmmVariableReady() also.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17626 6f19259b-4bc3-4df7-8a09-765794883524
Currently, Max Authenticated variable size = Max Regular Variable Size,
and both are controlled via a single PCD:
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize.
This PCD is introduced to control the Max Size of Authenticated Variable.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17609 6f19259b-4bc3-4df7-8a09-765794883524
So it could allow platform module to change the serial clock rate per different hardware.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17606 6f19259b-4bc3-4df7-8a09-765794883524
The correct logic should be:
- The SectionAlignment is got from Magic number.
- The Magic number is got from PE header and machine type.
The original code mix them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <Jiewen.yao@intel.com>
Reviewed-by: "Ard Biesheuvel" <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17603 6f19259b-4bc3-4df7-8a09-765794883524
1. In PiSmmIpl.c, free FullSmramRanges at error condition.
2. Move pool and page management definitions and structures
from PiSmmCorePrivateData.h to PiSmmCore.h.
PiSmmCorePrivateData.h should be only used to share SMM_CORE_PRIVATE_DATA
between PiSmmCore and PiSmmIpl. Pool and page management definitions
and structures were moved from Pool.c and Page.c to PiSmmCorePrivateData.h
incorrectly for memory profile feature at EDK2 R16335 commit.
3. DumpSmramInfo() only used for memory profile, so move the declaration
into SmramProfileRecord.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17598 6f19259b-4bc3-4df7-8a09-765794883524
Use if (Image->Started) condition judgement before call to
UnregisterMemoryProfileImage() in CoreUnloadAndCloseImage().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17597 6f19259b-4bc3-4df7-8a09-765794883524
Display engine base on class opcode to detect whether in
front page.Now remove class/subclass and use FormsetGuid
or ClassGuid to judge whether in front page
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17590 6f19259b-4bc3-4df7-8a09-765794883524
DescEnd will be clipped for alignment in CoreFindFreePagesI, and it
may fall below DescStart, when alignment is more than 16KB (included)
and both DescStart and original DescEnd fall into a single range of
such alignment. This results in a huge size (Negative number in
unsigned type) for this descriptor, fulfilling the allocation
requirement but failing to run ConvertPages; at last it causes
occasional failure of AllocatePages.
A simple comparison is added to ensure we would never get a negative
number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17575 6f19259b-4bc3-4df7-8a09-765794883524
1. Continue to get performance data by Performance Protocol
when no SMM performance data found.
2. Not try to get SMM performance data again
if no SMM performance handler found.
3. Correct typo 'totol' and 'guage'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17561 6f19259b-4bc3-4df7-8a09-765794883524
The initialization of Cc.Iosqes and Cc.Iocqes should not be removed
before any I/O operation as it would impact Qemu-NVMe functionality
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17559 6f19259b-4bc3-4df7-8a09-765794883524
Follow IDE BUS Master spec to ensure the PRDT table not cross 64k
boundary in memory.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17552 6f19259b-4bc3-4df7-8a09-765794883524
For boot performance dump, as current behavior.
It depends on which PerformanceLib instance the DP application linked to.
For example, if DxePerfrmanceLib(MdeModulePkg\Library\DxePerformanceLib)
got linked, it will try to dump PEI and DXE performance data; and if
DxeSmmPerfrmanceLib(MdeModulePkg\Library\DxeSmmPerformanceLib)
got linked, then SMM performance data are expected.
It has burden and confusion to developers about the DP application need to be linked to
different PerformanceLib instance in *.dsc and rebuilt for the performance data dump.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17548 6f19259b-4bc3-4df7-8a09-765794883524
This API can be used for platform to customize the boot description other than using core provided boot description.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17547 6f19259b-4bc3-4df7-8a09-765794883524
The debug message is to print the current TPL and requested TPL value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17543 6f19259b-4bc3-4df7-8a09-765794883524
Move ACPI default PCDs
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision
from [PcdsFixedAtBuild, PcdsPatchableInModule] to
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
to cover some platforms want to update them at boot time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17542 6f19259b-4bc3-4df7-8a09-765794883524
ARM toolchain raises the build error: "enumerated type mixed with
another type".
To fix the issue, typecase can be used like below.
- return EfiMaxMemoryType + 1;
+ return (EFI_MEMORY_TYPE)(EfiMaxMemoryType + 1);
But to eliminate the confusion, update the return type of
GetProfileMemoryIndex() from EFI_MEMORY_TYPE to UINTN.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17535 6f19259b-4bc3-4df7-8a09-765794883524
ARM toolchain raises the error: "statement is unreachable"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17529 6f19259b-4bc3-4df7-8a09-765794883524
LocatePciExpressCapabilityRegBlock () doesn't check the return status of Pci.Read().
Certain platform's PciRootBridge.Pci.Read() doesn't support PCIE access causing the CapabilityEntry not updated.
If the uninitialized CapabilityEntry equals to a big enough initial value, the while-loop will never end.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17513 6f19259b-4bc3-4df7-8a09-765794883524
fix bellow bug:
change checkbox from FALSE to TRUE.EFI_BROWSER_ACTION_CHANGED called
but when checkbox change back to FALSE,don't call EFI_BROWSER_ACTION_CHANGED
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17512 6f19259b-4bc3-4df7-8a09-765794883524
A previous incorrect check-in adds the IsaBusDxe driver to <Root>/Bus directory.
The patch fixes it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17506 6f19259b-4bc3-4df7-8a09-765794883524
This driver follows UEFI driver model and layers on ISA HC protocol defined in PI spec 1.2.1.
It consumes the ISA Host Controller protocol produced by the ISA Host Controller and installs the ISA Host Controller Service Binding protocol on the ISA Host Controller's handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17504 6f19259b-4bc3-4df7-8a09-765794883524
The original code hard-codes block size to 512. But after ATA 7 spec,
the non-512 block size is also supported. The code is updated to
dynamically calculate the block size according to IDENTIFY data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17495 6f19259b-4bc3-4df7-8a09-765794883524
class/subclass is the obseleted key word in VFR file. It is designed in framework HII.
After convert to UEFI HII, it is not used any longer. Now remove them from VFR
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17493 6f19259b-4bc3-4df7-8a09-765794883524
This change will make DEBUG information be aligned with DEBUG_GCD enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17470 6f19259b-4bc3-4df7-8a09-765794883524
from FullSmramRanges and FullSmramRangeCount in SmmCorePrivate by Constructor.
It can avoid potential first call to FreePool() -> BufferInSmram() ->
if (mSmramRanges == NULL) { GetSmramRanges();} ->
gBS->LocateProtocol() at boottime with >= TPL_NOTIFY or
after ReadyToLock or at OS runtime.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17463 6f19259b-4bc3-4df7-8a09-765794883524
Remove the unused DevicePathSize variable from EnumerateAllKeywords().
Due to our use of -Werror=unused-but-set-variable when building under GCC, the presence of DevicePathSize is breaking the build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17448 6f19259b-4bc3-4df7-8a09-765794883524
SVN r17428 ("MdeModulePkg: Implement UEFI25 HII Config keyword handler protocol") introduced code that triggers
-Werror=pointer-sign
under gcc ("warn for pointer argument passing or assignment with different signedness"). This patch fix up those locations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17445 6f19259b-4bc3-4df7-8a09-765794883524
It provides a repository to cache ESRT info for FMP or Non-FMP instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17426 6f19259b-4bc3-4df7-8a09-765794883524
When the ExecuteSmmCoreFromSmram() function fails, SmmIplEntry()
restores the SMRAM range to EFI_MEMORY_UC. However, it saves the
return value of gDS->SetMemorySpaceAttributes() in the same Status
variable that gDS->contains the return value of ExecuteSmmCoreFromSmram().
Therefore, if gDS->SetMemorySpaceAttributes() succeeds, the failure
of ExecuteSmmCoreFromSmram() is masked, and Bad Things Happen (TM).
Introduce a temporary variable just for the return value of
gDS->SetMemorySpaceAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17417 6f19259b-4bc3-4df7-8a09-765794883524
BaseSortLib is the library instance name not the class name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17398 6f19259b-4bc3-4df7-8a09-765794883524
Change the code to listen EFI_SW_DXE_BS_PC_LEGACY_BOOT_EVENT instead of the Legacy Boot event to provide more precise performance data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17377 6f19259b-4bc3-4df7-8a09-765794883524
It's to follow the PI spec 1.4.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jie Lin <jie.lin@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17367 6f19259b-4bc3-4df7-8a09-765794883524
PI 1.4 clarified SMM register protocol notify function return status as below:
EFI_SUCCESS Successfully returned the registration record that has
been added or unhooked
EFI_INVALID_PARAMETER Protocol is NULL or Registration is NULL
The implementation of SmmRegisterProtocolNotify() already followed this new
rule, needn't to be updated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17349 6f19259b-4bc3-4df7-8a09-765794883524
In order to support default value for orderedlist opcode, support buffer type value for default/oneofoption opcode.
If oneofoption used as a default value, it will not be added to normal option list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17336 6f19259b-4bc3-4df7-8a09-765794883524
DriverHealthManagerDxe provides a driver health management VFR form
which will be sent by UefiBootManagerLib when booting a boot option.
It also provides another driver health management VFR form which will
be included by certain boot manager menu through the VFR class GUID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17331 6f19259b-4bc3-4df7-8a09-765794883524
BootManagerMenuApp only provides a very simple UI showing all the boot options
recorded by "BootOrder" and user can select any of them to boot.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17329 6f19259b-4bc3-4df7-8a09-765794883524
BdsDxe driver links to UefiBootManagerLib and PlatformBootManager to
provide a pure UEFI boot manager conforming to the UEFI spec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17328 6f19259b-4bc3-4df7-8a09-765794883524
Boot mode maybe changed at any point during the PEI phase, therefore, boot
mode should be checked later rather at entry point.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17323 6f19259b-4bc3-4df7-8a09-765794883524
This patch produces a EFI_NVM_EXPRESS_PASS_THRU protocol instance
on device handle to provide upper user a way to send cmd to NVMe
device.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17286 6f19259b-4bc3-4df7-8a09-765794883524
The changes in ScsiDisk include:
1. Add UFS disk info support.
2. Remove the wrong block size calculation.
3. Get sense data for TEST_UNIT_READY cmd immediately rather than sending a REQUEST_SENSE cmd again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17247 6f19259b-4bc3-4df7-8a09-765794883524
It includes 4 drivers:
1. UfsPassThruDxe, which is a UEFI driver and consumes EFI_UFS_HOST_CONTROLLER_PROTOCOL and produces EFI_EXT_SCSI_PASS_THRU_PROTOCOL
2. UfsPciHcDxe, which is specific for pci-based UFS HC implementation and is a UEFI driver to produce EFI_UFS_HOST_CONTROLLER_PROTOCOL.
3. UfsBlockIoPei, which is a PEI driver and consumes EFI_UFS_HOST_CONTROLLER_PPI and produces EFI_PEI_VIRTUAL_BLOCK_IO_PPI.
4. UfsPciHcPei, which is specific for pci-based UFS HC implementation and is a PEI driver to produce EFI_UFS_HOST_CONTROLLER_PPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17246 6f19259b-4bc3-4df7-8a09-765794883524
Add stride PCD to MdeModulePkg to support 16550 UARTs with a register stride that is not 1 byte.
The default value is 1 byte.
Quark SoC uses a stride of 4 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17215 6f19259b-4bc3-4df7-8a09-765794883524
The number of the Prp lists and the number of the entries in last Prp list may be calculated wrongly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Baban Devkate <baban.devkate@seagate.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17208 6f19259b-4bc3-4df7-8a09-765794883524
Media->IoAlign field of BlockIo protocol instance installed by this driver should be set to the value of ScsiIo->IoAlign.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17195 6f19259b-4bc3-4df7-8a09-765794883524
- SVN r14866:
MdePkg and MdeModulePkg Pcd: Add the new EFI_GET_PCD_INFO_PROTOCOL and
EFI_GET_PCD_INFO_PPI support for PI 1.2.1 compliance.
added the "DataBase" local variable to PcdPeimInit(), and both set it and
used it.
- SVN r14869:
MdeModulePkg and Nt32Pkg Pcd: Add the new EFI_GET_PCD_INFO_PROTOCOL and
EFI_GET_PCD_INFO_PPI support for PI 1.2.1 compliance.
changed the PcdPeimInit() function, but "DataBase" remained both set and
used.
- SVN r17173:
MdeModulePkg Pcd: Check the input SkuId in SetSku()
changed the function again; and this time "DataBase" became
set-but-unused. It triggers the following build error, when building
ArmVirtualizationQemu.dsc with gcc-4.8:
MdeModulePkg/Universal/PCD/Pei/Pcd.c:150:21: error: variable 'DataBase'
set but not used [-Werror=unused-but-set-variable]
PEI_PCD_DATABASE *DataBase;
^
cc1: all warnings being treated as errors
Fix the error by removing the DataBase variable, restoring the pre-r14866
state locally, when the BuildPcdDatabase() function was called, but its
return value was thrown away.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17179 6f19259b-4bc3-4df7-8a09-765794883524
then GetSku() could return the currently active SkuId.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17173 6f19259b-4bc3-4df7-8a09-765794883524
RFC1323 says the most recently received TSVal must be echoed in TSecr in ACK packets
which was not done at first connection because the code saving the TSVal from the peer
was skipped at this point. This resulted in sending an ACK reply with a 0 TSecr that
was rejected at least by FreeBSD. This patch fixes this by updating the saved TSVal
also for connection initiation packets.
Thanks to Laszlo Ersek for analysis and help in debugging.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17165 6f19259b-4bc3-4df7-8a09-765794883524
Also update PCD_SERVICE_PEI_VERSION and PCD_SERVICE_DXE_VERSION to match with
the new PcdDataBase binary generated by BaseTools.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17161 6f19259b-4bc3-4df7-8a09-765794883524
to just return EFI_SUCCESS if the variable has been in the locked list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17141 6f19259b-4bc3-4df7-8a09-765794883524
Roll back report status code to original place in RuntimeDriverSetVirtualAddressMap.
Per UEFI spec, the call to SetVirtualAddressMap() must be done with the physical mappings.
We can not assume virtual address could work in SetVirtualAddressMap (), so we can not call
report status code interface with virtual address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17139 6f19259b-4bc3-4df7-8a09-765794883524
Move report status code to the end after all pointers convert and image relocation are finished.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17136 6f19259b-4bc3-4df7-8a09-765794883524
For PI spec vol3,
"EFI_SW_DXE_BS_PC_VIRTUAL_ADDRESS_CHANGE_EVENT The EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event was signaled."
However, in current code base, it is reported before events were signaled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17123 6f19259b-4bc3-4df7-8a09-765794883524
Copy below two library instances from IntelFrameworkModulePkg to MdeModulePkg. Then, Platform dsc can
refer to them from MdeModulePkg, and remove the dependency of IntelFrameworkModulePkg. The ones in
IntelFrameworkModulePkg are still kept for compatibility.
1. PeiDxeDebugLibReportStatusCode
2. LzmaCustomDecompressLib
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17112 6f19259b-4bc3-4df7-8a09-765794883524
Add status code report and cpu deadloop when DXE IPL PPI is not found.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17087 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore calls REPORT_STATUS_CODE_WITH_EXTENDED_DATA() with its internal structure for Image
dispatcher. No code consumes it. But, it brings confuse.
DxeCore and SmmCore calls REPORT_STATUS_CODE_WITH_EXTENDED_DATA() with Handle only.
To be consistent, update PeiCore to be same to DxeCore and SmmCore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17085 6f19259b-4bc3-4df7-8a09-765794883524
to handle the case PE file alignment is not same as PE section alignment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17063 6f19259b-4bc3-4df7-8a09-765794883524
Add SMBIOS 64-bit entry point and 64-bit table support for SMBIOS 3.0.
Introduce PcdSmbiosEntryPointProvideMethod to produce 32-bit or 64-bit
SMBIOS table.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17051 6f19259b-4bc3-4df7-8a09-765794883524
The restriction of UsbHc2.SyncInterruptTransfer() on interrupt transfer direction is removed. This interface could support Interrupt IN/OUT now.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17041 6f19259b-4bc3-4df7-8a09-765794883524
to return EFI_NOT_FOUND when a specified variable doesn't exist and
Data parameter is NULL but DataSize parameter is valid in GetVariable() invocation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17030 6f19259b-4bc3-4df7-8a09-765794883524
On AArch64, the OS can choose to run with a page size of 64 KB,
making it cumbersome to deal with UEFI reserved memory regions
whose boundaries are not 64 KB aligned.
So increase the allocation granularity for runtime regions to
64 KB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17016 6f19259b-4bc3-4df7-8a09-765794883524
This patch changes the allocation logic for the pool allocator to only
allocate additional pages if the requested allocation cannot be fulfilled
from the current bin or any of the larger ones. If there are larger blocks
available, they will be used to serve the allocation, and the remainder will
be carved up into smaller blocks using the existing carving up logic.
Note that all pool sizes are a multiple of the smallest pool size, so it is
guaranteed that the remainder will be carved up without spilling. Due to the
exponential nature of the pool sizes, the amount of work is logarithmic in
the size of the available block.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17015 6f19259b-4bc3-4df7-8a09-765794883524
In preparation of the next patch, that serves allocations from higher-up
bins if the current bin is depleted, this patch updates the carving up
strategy to populate the largest bins first. To ensure that there will
always be an allocation of the appropriate size made, the current allocation
request is served first from the newly allocated memory region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17014 6f19259b-4bc3-4df7-8a09-765794883524
In preparation of making the pool code capable of serving allocations
from higher-up bins, update the free path to traverse a candidate page
by following the index of POOL_FREE header instead of duplicating the
carving logic that was used at page allocation time. This allows chunks
to be split into smaller ones, where one can be returned to serve the
allocation, and the other stored in a smaller bin for later use.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17013 6f19259b-4bc3-4df7-8a09-765794883524
The existing linear mapping between allocation size and pool index
does not scale when moving to a 64 KB granularity or beyond. With
a granularity of 64 KB, 2048 (!) bins will be created for each
memory type, each differing 32 bytes in size with the next one.
Instead, introduce an exponential scheme where each bin size is
the sum of the two previous ones.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17012 6f19259b-4bc3-4df7-8a09-765794883524
After fixing the sanity check on the alignment of the runtime regions
in SVN revision #16630 ("MdeModulePkg/DxeMain: Fix wrong sanity check
in CoreTerminateMemoryMap()"), it is no longer possible to define a
runtime allocation alignment that is different from the boot time
allocation alignment.
For instance, #defining the following in MdeModulePkg/Core/Dxe/Mem/Imem.h
will hit the ASSERT () in MdeModulePkg/Core/Dxe/Mem/Page.c:1798
#define EFI_ACPI_RUNTIME_PAGE_ALLOCATION_ALIGNMENT (SIZE_64KB)
#define DEFAULT_PAGE_ALLOCATION (EFI_PAGE_SIZE)
(which is needed for 64-bit ARM to adhere to the Server Base Boot
Requirements [SBBR], which stipulates that all runtime memory regions
should be naturally aligned multiples of 64 KB)
This patch fixes this use case by ensuring that the backing for the memory
pools is allocated in appropriate chunks for the memory type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17011 6f19259b-4bc3-4df7-8a09-765794883524
Some compilers requires an empty line at the end of the file.
ARM compiler version 5 is one of these compilers:
error #1-D: last line of file ends without a newline
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16918 6f19259b-4bc3-4df7-8a09-765794883524
As the drivers and library do not reference gEfiSmmAccess2ProtocolGuid explicitly now
after SmmMemLib introduced.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16760 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
for trying to reclaim variable space at EndOfDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16687 6f19259b-4bc3-4df7-8a09-765794883524
And leave the variable error flag in NV flash as the last boot variable error flag.
After EndOfDxe in InitializeVarErrorFlag (), the variable error flag in NV flash
will be initialized to this local current boot variable error flag.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16684 6f19259b-4bc3-4df7-8a09-765794883524
Modify DxeMain.c which displays incorrect debug message regarding FV Hob.
Specifically, the BaseAddress and Length are not related to the same FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16660 6f19259b-4bc3-4df7-8a09-765794883524
The code in AcpiTableDxe handles the installation of FADT and FACS in both
possible orders. In the [FADT, FACS] installation order, the FACS is at
once linked into the FADT. In the [FACS, FADT] installation order, the
FACS is stashed temporarily, and it is linked into the FADT when the FADT
is installed later.
According to the ACPI specification, *at most one* of FADT.FirmwareCtrl
and FADT.XFirmwareCtrl may be nonzero. The code is aware of this
requirement, and it never sets both of them to nonzero values at once.
However, the code doesn't expect the following:
- The caller first installs the FACS, which is stashed. The address that
is saved happens to fall below 4GB.
- The caller then installs a FADT, with a zero FirmwareCtrl field, and a
nonzero (pre-populated) XFirmwareCtrl field.
In this case the code sets FADT.FirmwareCtrl to the less-than-4GB address
of the stashed FACS, and leaves the different nonzero value in
FADT.XFirmwareCtrl. This violates the ACPI specification.
Prevent this by always zeroing the field that we do *not* set.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16659 6f19259b-4bc3-4df7-8a09-765794883524
The function CoreTerminateMemoryMap() performs some final sanity checks on the runtime regions in the memory map before allowing ExitBootServices() to complete.
Unfortunately, it does so by testing the EFI_MEMORY_RUNTIME bit in the Attribute field, which is never set anywhere in the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16630 6f19259b-4bc3-4df7-8a09-765794883524
Move libraries from ShellPkg into MdeModulePkg and MdePkg.
The following libraries are being migrated out of ShellPkg in order to make
their functionality more widely available.
• PathLib: Incorporate into MdePkg/Library/BaseLib
• FileHandleLib: MdePkg/Library/UefiFileHandleLib
• BaseSortLib: MdeModulePkg/Library/BaseSortLib
• UefiSortLib: MdeModulePkg/Library/UefiSortLib
Diffs showing file changes are in the attached file, LibMigration.patch.
A description of the changes follows:
• Move ShellPkg/Include/Library/FileHandleLib.h to MdePkg/Include/Library/FileHandleLib.h
• Move ShellPkg/Include/Library/SortLib.h to MdeModulePkg/Include/Library/SortLib.h
• Move ShellPkg/Library/BaseSortLib to MdeModulePkg/Library/BaseSortLib
• Move ShellPkg/Library/UefiSortLib to MdeModulePkg/Library/UefiSortLib
• Move ShellPkg/Library/BasePathLib/BasePathLib.c to MdePkg/Library/BaseLib/FilePaths.c
• Merge ShellPkg/Include/Library/PathLib.h into MdePkg/Include/Library/BaseLib.h
• Delete ShellPkg/Library/BasePathLib; Includes BasePathLib.c and BasePathLib.inf
• NetworkPkg/NetworkPkg.dsc
• PerformancePkg.dsc
• OvmfPkg/OvmfPkgX64.dsc
• OvmfPkg/OvmfPkgIa32X64.dsc
• OvmfPkg/OvmfPkgIa32.dsc
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
• MdeModulePkg/MdeModulePkg.dec
o Add SortLib library class
• MdePkg/MdePkg.dec
o Add FileHandleLib library class
o Add PcdUefiFileHandleLibPrintBufferSize PCD
• MdePkg/Library/BaseLib/BaseLib.inf
o Add FilePaths.c to [Sources]
• MdePkg/Include/Library/BaseLib.h
o Update file description to include "file path functions"
• ShellPkg/ShellPkg.dsc
o Change PACKAGE_GUID to { C1014BB7-4092-43D4-984F-0738EB424DBF }
o Update PACKAGE_VERSION to 1.0
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
o Remove ShellPkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf from [Components]
• ShellPkg/ShellPkg.dec
o Update PLATFORM_VERSION to 1.0
o Remove declarations of the FileHandleLib, SortLib, and PathLib Library Classes
o Update comment for the PcdShellPrintBufferSize PCD.
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
• ShellPkg/Application/Shell/Shell.inf
o Remove PathLib from [LibraryClasses]
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.h
• ShellPkg/Application/Shell/Shell.h
o Remove #include <Library/PathLib.h>
• ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
o Add PathLib to [LibraryClasses]
• ShellPkg/Library/UefiShellLevel1CommandsLib/If.c
o Remove #include <Library/PathLib.h>
• ShellPkg/Application/ShellSortTestApp/ShellSortTestApp.inf
o Add MdeModulePkg/MdeModulePkg.dec to [Packages]
• MdeModulePkg/Library/BaseSortLib/BaseSortLib.inf
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
o Replace ShellPkg.dec with MdeModulePkg.dec in [Packages]
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.c
o Remove #include <ShellBase.h>
o Define USL_FREE_NON_NULL() to replace SHELL_FREE_NON_NULL()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16601 6f19259b-4bc3-4df7-8a09-765794883524
El Torito format can be used on different media (eg: USB).
A ISO image can be dumped onto a USB mass-storage.
These media might not have the same block size as the CDROM media (ie: 2KB).
The El Torito code and the specification assumes a LBA 2KB.
In addition, the specification says in "12.3.4.4 CD-ROM and DVD-ROM":
UEFI code does not assume a fixed block size.
I was able to dupliacte the issue by copying a debian ISO on a USB driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16600 6f19259b-4bc3-4df7-8a09-765794883524
SPrintLength() and SPrintLengthAsciiFormat() API doesn’t work with 'g', 't' and 'r' option. The fix sync from MdePkg BasePrintLib instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16593 6f19259b-4bc3-4df7-8a09-765794883524
and follow UEFI spec to check UEFI defined variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16579 6f19259b-4bc3-4df7-8a09-765794883524
This module implements Simple FileSystem protocol over Firmware Volume (FV).
EFI Modules included into a FV can be listed and launched from the EFI Shell or any other EFI applications.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16547 6f19259b-4bc3-4df7-8a09-765794883524
1.Add code to cover the space which is not covered by browser before.
2.Remove ESC help string for front page screen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16541 6f19259b-4bc3-4df7-8a09-765794883524
Setting a bit in the PxSACT register for a command in the command list indicates
to the controller that the command list slot contains a native queued command (NCQ).
This can cause problems with some controllers (one such controller is the Marvell 9128).
Since NCQ commands are not used, don't set the PxACT register for commands issued.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16536 6f19259b-4bc3-4df7-8a09-765794883524
The GNU assembler (2.24.51.20140918) is failing to build when movw is used on this instruction.
Instead use the mov instruction, which matches the other cases of loading segment registers.
The error message seen is:
AsmFuncs.iii:283: Error: incorrect register `%rax' used with `w' suffix
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16529 6f19259b-4bc3-4df7-8a09-765794883524
The traversing of a Memory Mapped FV can overflow the 4GB limit on a 32bit system
during the setting up a Linked List of FFS file inside the FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16527 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore FirmwareVolmeInfoPpiNotifyCallback() should check FvCount when new one is added.
Now, this check is the entry of Notify function that is too early, because PeiCore will
install FvInfo and FvInfo2 both for one sub FV image and trig FvNotify function twice for the same FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16520 6f19259b-4bc3-4df7-8a09-765794883524
ARM Toolchain raises a warning/error when an integer is used instead
of a enum value.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16501 6f19259b-4bc3-4df7-8a09-765794883524
Fix DxeCore NotifyFwVolBlock() function to make sure FV protocol is installed for all valid PI FV images.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16496 6f19259b-4bc3-4df7-8a09-765794883524
If CommunicationBuffer is not in valid address scope, return EFI_INVALID_PARAMETER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <Jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16486 6f19259b-4bc3-4df7-8a09-765794883524
- Fix EFI_IPv4_ADDRESS usages to use a macro to copy the structure
instead of direct assignment, to avoid runtime alignment errors.
- Fix a EFI_INPUT_KEY usage in TerminalDxe to use CopyMem() to copy the
structure instead of direct assignment, to avoid runtime alignment error.
- Delete excess local variables that are initialized but otherwise unused.
- CompilerIntrinsicsLib library now imported for AARCH64, as well as ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Randy Pawell <randy_pawell@hp.com>
Reviewed-by: Olivier Martin <Olivier.Martin@arm.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16471 6f19259b-4bc3-4df7-8a09-765794883524
DXE FpdtStatusCodeHandler is required to be unregistered even if StatusCodeReport is disabled. This change makes sure FpdtStatusCodeHandler be always unregistered.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Vincent Zimmer <vincent.zimmer@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16470 6f19259b-4bc3-4df7-8a09-765794883524
that can cause an exception. mPeiExMapppingTableSize is the table size, but the
code needs to check the entry number.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hp.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16448 6f19259b-4bc3-4df7-8a09-765794883524
When scroll menu to the one not shows in current form, and this menu has option mismatch error, current display engine will not highlight this menu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16447 6f19259b-4bc3-4df7-8a09-765794883524
Based on the input request to get default value for questions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16413 6f19259b-4bc3-4df7-8a09-765794883524
It is defined in the PI Specification version 1.3.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16409 6f19259b-4bc3-4df7-8a09-765794883524
Fix compiler warning about variable set but unused by returning status
of last operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16381 6f19259b-4bc3-4df7-8a09-765794883524
Per AHCI 1.1 spec, AE bit of GHC register is read-only if CAP.SAM is 1
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16321 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
Move the check of FV Header signature and file system to
GetFwVolHeader() to avoid reading the whole unexpected FvHeader.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16255 6f19259b-4bc3-4df7-8a09-765794883524
DiskIoDxe: Fix ReadDiskEx and WriteDiskEx to not modify the user’s buffer when the BufferSize is 0.
DiskIoDxe: Fix ReadDiskEx and WriteDiskEx hang issue when the submitted blockio2 task is completed before submitting another blockio2 task.
DiskIoDxe: Fix FlushEx to free the flush task item in callback (memory leak issue).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16215 6f19259b-4bc3-4df7-8a09-765794883524
It can fix the confused ERROR log like below.
"AllocatePages failed: No 0x1 Pages is available.
There is only left 0x1 pages memory resource to be allocated."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16211 6f19259b-4bc3-4df7-8a09-765794883524
1. Work space and spare block must be in a FVB with FV header.
Updated to work space and spare block could be in independent FVBs that are without FV header.
2. NV region, work space and spare block must have same BlockSize.
Updated to NV region, work space and spare block could have different BlockSize.
3. Works space size must be <= one block size.
Update to work space size could be <= one block size (not span blocks) or > one block size (block size aligned).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16201 6f19259b-4bc3-4df7-8a09-765794883524
Before get default value for each questions, call ExtractConfig function to get the altcfg string for all formset. Later when question try to get default value from AltCfg string, just get the value from the saved altcfg string instead of call ExtractConfig function to get it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16162 6f19259b-4bc3-4df7-8a09-765794883524
even if the native function's arguments are less than 4.
From MSDN x64 Software Conventions, Overview of x64 Calling Conventions:
“The caller is responsible for allocating space for parameters to the
callee, and must always allocate sufficient space for the 4 register
parameters, even if the callee doesn’t have that many parameters.
This aids in the simplicity of supporting C unprototyped functions,
and vararg C/C++ functions.”
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud elhaj@hp.com
Reviewed by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed by: Feng Tian <Feng.Tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16152 6f19259b-4bc3-4df7-8a09-765794883524
1. Add delay after set device address and get configuration descriptor.
2. Sync the change at R15876 in XhciDxe to do not access transfer ring when endpoint is isochronous type or control type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16105 6f19259b-4bc3-4df7-8a09-765794883524
In XCODE tool chain, the 64-bit bit wise and operation is causing the compiler to emit an __umoddi3.
This patch uses BaseLib API to replace 64-bit bit operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16065 6f19259b-4bc3-4df7-8a09-765794883524
1. Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
2. Remove unused SectionExtractionDxeModStrs.uni and SectionExtractionPeiModStrs.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16044 6f19259b-4bc3-4df7-8a09-765794883524
5. Add PACKAGE_UNI_FILE UNI file that contains the localized Abstract and Description of a package and localized strings associated with PCDs.
a. Addresses an information gap between DEC files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume PACKAGE_UNI_FILE and associated UNI file during UDP creation that performs the DEC -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce PACKAGE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> DEC conversion.
6. Add Package Extra UNI file that provides the localized Name of a package.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a package to specify extra files to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a package to go along with the localized Abstract and Description from the PACKAGE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15965 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15964 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15963 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15962 6f19259b-4bc3-4df7-8a09-765794883524
The code FvCheck() will check FFS file checksum to verify if FFS file is valid when the file is
with FFS_ATTRIB_CHECKSUM set. The whole file will be read through when doing checksum check.
So we can cache FFS file to memory buffer for following checksum calculating first.
And then, the cached file buffer can be also used for FvReadFile.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15958 6f19259b-4bc3-4df7-8a09-765794883524
Previous DxeCore FwVol code will cache whole FvMain FV from flash that may be
uncached if platform reports FvMain FVB, it will impact DXE performance.
The code already has file level cache, so don’t need to cache memory mapped IO FV.
It can also reduce memory consumption of caching memory mapped IO FVs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15916 6f19259b-4bc3-4df7-8a09-765794883524
2. CapsuleLongModeBuffer variable should be set to Read-Only. It should not be changed by someone else.
3. Introduce a new PCD PcdIdentifyMappingPageTablePtr to share the same range of page table between AcpiS3 and Capsule.
4. Capsule stack size is allocated from PcdCapsulePeiLongModeStackSize.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Elvin Li <elvin.li@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15909 6f19259b-4bc3-4df7-8a09-765794883524
We strongly prefer that contribtions be offered using the same license
as the project/module. But, we should document other acceptable
licenses for contributions.
This will allow package owners to more easily know if they can accept
a contribution under a different source license.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Mark Doran <mark.doran@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add support for RSA 2048 SHA 256 signing and verification encoded in a PI FFS GUIDED Encapsulation Section. The primary use case of this feature is in support of signing and verification of encapsulated FVs for Recovery and Capsule Update, but can potentially be used for signing and verification of any content that can be stored in a PI conformant FFS file. Signing operations are performed from python scripts that wrap OpenSsl command line utilities. Verification operations are performed using the OpenSsl libraries in the CryptoPkg.
The guided encapsulation sections uses the UEFI 2.4 Specification defined GUID called EFI_CERT_TYPE_RSA2048_SHA256_GUID. The data layout for the encapsulation section starts with the UEFI 2.4 Specification defined structure called EFI_CERT_BLOCK_RSA_2048_SHA256 followed immediately by the data. The signing tool included in these patches performs encode/decode operations using this data layout. HashType is set to the UEFI 2.4 Specification defined GUID called EFI_HASH_ALGORITHM_SHA256_GUID.
MdePkg/Include/Guid/WinCertificate.h
=================================
//
// WIN_CERTIFICATE_UEFI_GUID.CertType
//
#define EFI_CERT_TYPE_RSA2048_SHA256_GUID \
{0xa7717414, 0xc616, 0x4977, {0x94, 0x20, 0x84, 0x47, 0x12, 0xa7, 0x35, 0xbf } }
///
/// WIN_CERTIFICATE_UEFI_GUID.CertData
///
typedef struct {
EFI_GUID HashType;
UINT8 PublicKey[256];
UINT8 Signature[256];
} EFI_CERT_BLOCK_RSA_2048_SHA256;
MdePkg/Include/Protocol/Hash.h
=================================
#define EFI_HASH_ALGORITHM_SHA256_GUID \
{ \
0x51aa59de, 0xfdf2, 0x4ea3, {0xbc, 0x63, 0x87, 0x5f, 0xb7, 0x84, 0x2e, 0xe9 } \
}
The verification operations require the use of public key(s). A new PCD called gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer is added to the SecurityPkg that supports one or more SHA 256 hashes of the public keys. A SHA 256 hash is performed to minimize the FLASH overhead of storing the public keys. When a verification operation is performed, a SHA 256 hash is performed on EFI_CERT_BLOCK_RSA_2048_SHA256.PublicKey and a check is made to see if that hash matches any of the hashes in the new PCD. It is recommended that this PCD always be configured in the DSC file as storage type of [PcdsDynamixExVpd], so the public keys are stored in a protected read-only region.
While working on this feature, I noticed that the CRC32 signing and verification feature was incomplete. It only supported CRC32 based verification in the DXE Phase, so the attached patches also provide support for CRC32 based verification in the PEI Phase.
I also noticed that the most common method for incorporating guided section extraction libraries was to directly link them to the DXE Core, which is not very flexible. The attached patches also add a generic section extraction PEIM and a generic section extraction DXE driver that can each be linked against one or more section extraction libraries. This provides a platform developer with the option of providing section extraction services with the DXE Core or providing section extraction services with these generic PEIM/DXE Drivers.
Patch Summary
==============
1) BaseTools - Rsa2049Sha256Sign python script that can perform test signing or custom signing of PI FFS file GUIDed sections
a. Wrapper for a set of OpenSsl command line utility operations
b. OpenSsl command line tool must be installed in location that is in standard OS path or in path specified by OS environment variable called OPENSSL_PATH
c. Provides standard EDK II command line arguments for a tool that encodes/decodes guided encapsulation section
Rsa2048Sha256Sign - Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.
usage: Rsa2048Sha256Sign -e|-d [options] <input_file>
positional arguments:
input_file specify the input filename
optional arguments:
-e encode file
-d decode file
-o filename, --output filename
specify the output filename
--private-key PRIVATEKEYFILE
specify the private key filename. If not specified, a
test signing key is used.
-v, --verbose increase output messages
-q, --quiet reduce output messages
--debug [0-9] set debug level
--version display the program version and exit
-h, --help display this help text
2) BaseTools - Rsa2049Sha256GenerateKeys python script that can generate new private/public key and PCD value that is SHA 256 hash of public key using OpenSsl command line utilities.
a. Wrapper for a set of OpenSsl command line utility operations
b. OpenSsl command line tool must be installed in location that is in standard path or in path specified by OS environment variable called OPENSSL_PATH
Rsa2048Sha256GenerateKeys - Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.
usage: Rsa2048Sha256GenerateKeys [options]
optional arguments:
-o [filename [filename ...]], --output [filename [filename ...]]
specify the output private key filename in PEM format
-i [filename [filename ...]], --input [filename [filename ...]]
specify the input private key filename in PEM format
--public-key-hash PUBLICKEYHASHFILE
specify the public key hash filename that is SHA 256
hash of 2048 bit RSA public key in binary format
--public-key-hash-c PUBLICKEYHASHCFILE
specify the public key hash filename that is SHA 256
hash of 2048 bit RSA public key in C structure format
-v, --verbose increase output messages
-q, --quiet reduce output messages
--debug [0-9] set debug level
--version display the program version and exit
-h, --help display this help text
3) BaseTools\Conf\tools_def.template
a. Define GUID/Tool to perform RSA 2048 SHA 256 test signing and instructions on how to use alternate private/public key
b. GUID is EFI_CERT_TYPE_RSA2048_SHA256_GUID
c. Tool is Rsa2049Sha256Sign
4) MdeModulePkg\Library\PeiCrc32GuidedSectionExtractionLib
a. Add peer for DxeCrc32GuidedSectionExtractionLib so both PEI and DXE phases can perform basic integrity checks of PEI and DXE components
5) MdeModulePkg\Universal\SectionExtractionPei
a. Generic PEIM that can link against one or more NULL section extraction library instances to provided one or more GUIDED Section Extraction PPIs
6) MdeModulePkg\Universal\SectionExtractionDxe
a. Generic DXE Driver that can link against one or more NULL section extraction library instances to provide one or more GUIDED Section Extraction Protocols.
7) SecurityPkg\Library\PeiRsa2048Sha256GuidedSectionExtractLib
a. NULL library instances that performs PEI phase RSA 2048 SHA 256 signature verification using OpenSsl libraries from CryptoPkg.
b. Based on algorithms from SecurityPkg Authenticated Variable services
c. Uses public key from gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer.
8) SecurityPkg\Library\DxeRsa2048Sha256GuidedSectionExtractLib
a. NULL library instances that performs DXE phase RSA 2048 SHA 256 signature verification using OpenSsl libraries from CryptoPkg.
b. Based on algorithms from SecurityPkg Authenticated Variable services
c. Uses public key from gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer.
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15799 6f19259b-4bc3-4df7-8a09-765794883524
It changes some of the PCD declarations to add more supported PCD storage types and
the change in the PCD access methods is associated with that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zeng, Star <star.zeng@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15798 6f19259b-4bc3-4df7-8a09-765794883524
This library has one depex of SerialPortPpi. Then, the PEIM linked it has this depex so that it is dispatched after SerialPortPpi is installed. SerialPortPpi notifies the platform initialization done, then serial port will work.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15782 6f19259b-4bc3-4df7-8a09-765794883524
If GUIDED section has AUTH attribute only, DxeCore may wrongly set its AuthenticationStatus to 0 when its matched GUIDED extraction handler is not installed and Auth data is not verified. For this case, the return AuthenticationStatus should be EFI_AUTH_STATUS_NOT_TESTED.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Kinney, Michael D <michael.d.kinney@intel.com>
Reviewed-by: Yao, Jiewen <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15781 6f19259b-4bc3-4df7-8a09-765794883524
Roy Franz
Zhang Lubo
Star Zeng
Feng Tian
jiaxinwu
Qiu Shumin
Ronald Cron
Fu Siyuan
Dandan Bi
Ruiyu Ni
Hao Wu
Liming Gao
Ard Biesheuvel
Yao, Jiewen
Heyi Guo
Zachary Bobroff
Olivier Martin
Eric Dong
Chao Zhang
Laszlo Ersek
Jeff Fan
Michael Kinney
BALATON Zoltan
Elvin Li
Ye Ting
Jordan Justen
Daryl McDaniel
Dong Guo
Hot Tian
Brendan Jackman
Chris Ruffin
Randy Pawell
Samer El-Haj-Mahmoud
Samer El-Haj-Mahmoud
jaben carsey
Eugene Cohen
Garrett Kirkendall
Reza Jelveh
Samer El-Haj-Mahmoud elhaj
Nikolai Saoukh
Sergey Isakov