pl011 releases earlier than r1p5 has a fifo depth of 16 bytes, whereas
version r1p5 upwards has a fifo depth of 32 bytes. The pl011 driver was
hardwired to 32 byte depth, causing dropped characters on some platforms
(including default settings on FVP Base and Foundation models).
Update driver to select 16 or 32 on port initialization by checking the
component revision.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16656 6f19259b-4bc3-4df7-8a09-765794883524
Rework the PL011UartGetControl() function removing a TODO by the way.
Update of the header comment blocks of (PL011Uart|SerialPort)GetControl() functions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16252 6f19259b-4bc3-4df7-8a09-765794883524
Rework of PL011UartSetControl() as a consequence as well as update of
function header comment blocks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16251 6f19259b-4bc3-4df7-8a09-765794883524
Use the command to load and start a ARM Executable File from mass storage.
This is basically just an ELF file. The program is copied to memory and
the Entrypoint is called. Control is not expected to return back to the
Shell. This has only been tested on AArch64 with a limited set of AXF
binaries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16247 6f19259b-4bc3-4df7-8a09-765794883524
Add additional structure to get file meta-data information from BootMonFS
based files. AXF files are processed by the Flash loader and the ELF header
stripped. The relevant information is stored in the file-system.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Harry Liebel <Harry.Liebel@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15906 6f19259b-4bc3-4df7-8a09-765794883524
Replace tabs by spaces for indentation to comply to EDK2 coding standards.
Done in files with extension ".S", ".c", ".h", ".asm", ".dsc", ".inc", "*.inf",
"*.dec" or ".fdf" and located in ArmPkg, ArmPlatformPkg, EmbeddedPkg,
BeagleBoardPkg or Omap35xxPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reviewed-By: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15901 6f19259b-4bc3-4df7-8a09-765794883524
- Removed PCD base address from the macro definition. The base address needs to be fixup when the driver runs in UEFI Runtime mode
- Added the PL031 controller memory region to the Runtime UEFI Memory Mapped IO
- Caught the gEfiEventVirtualAddressChangeGuid event to fixup the PL031 Base address
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15435 6f19259b-4bc3-4df7-8a09-765794883524
To be compliant with the UEFI specification it is required to update SERIAL_IO_MODE with the values set.
This prototype change allows to get the value used inside SerialPortSetAttributes().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14365 6f19259b-4bc3-4df7-8a09-765794883524
ArmPlatformGetPrimaryCoreMpId returns the MPID of the primary core.
The primary core might not be known at build time (eg: the platform allows
the boot CPU to be changed through board config).
This function is used during the secondary core stack initialization to know
the position of the secondary core in the SoC.
A secondary core that is at the position N, with N greater than the primary
core position, will be at the position N-1 in the list of secondary stacks
(the primary core has its own separate bigger stack).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14345 6f19259b-4bc3-4df7-8a09-765794883524
Checking if a core if the primary/boot core used to be done with the macro
IS_PRIMARY_CORE().
Some platforms exposes configuration registers to change the primary core.
Replacing the macro IS_PRIMARY_CORE() by ArmPlatformIsPrimaryCore() allows
some flexibility in the way to check the primary core.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14344 6f19259b-4bc3-4df7-8a09-765794883524
ArmPlatformGetAdditionalSystemMemory() function wasn't used anywhere in UEFI.
This patch deletes it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14270 6f19259b-4bc3-4df7-8a09-765794883524
Rename GetEnvironmentVariable() function into GetGlobalEnvironmentVariable().
GetEnvironmentVariable() function sill exists but caller must now pass a Guid.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14176 6f19259b-4bc3-4df7-8a09-765794883524
A ArmSmcLib Null implementation has also been added for CPU without the ARM Security
Extension (Trustzone support).
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14164 6f19259b-4bc3-4df7-8a09-765794883524
The MP ID Register is not enough to know the position of the core in the SoC.
We could have SoC with multi cluster of CPUs that do not contain the
same number of CPUs.
This function should return the position of the CPU in the SoC.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13770 6f19259b-4bc3-4df7-8a09-765794883524
For instance, in case of CpuHotPlug boot path the platform has already been
initialized. The CPU core should not execute any of the platform initialization
in this case.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13492 6f19259b-4bc3-4df7-8a09-765794883524
The function only used in Secure Firmware used to be mixed with
the Non-Secure/Normal functions in ArmPlatformLib.
When the Secure Firmware was not required for some platforms (eg:
BeagleBoard), these functions were empty functions.
This new interface has been created to clean the ArmPlatformLib
interface between the SEC and PEI phases.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13260 6f19259b-4bc3-4df7-8a09-765794883524
This function returns the address of a Global Variable in the Global Variable Region.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13246 6f19259b-4bc3-4df7-8a09-765794883524
- ArmPlatformNormalInitialize() has been renamed into ArmPlatformInitialize()
- Make the function be called at the early stage of the PEI phase as some
platforms require their interconnects or clocks to be initialize before any
access to Timers or UARTs.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13245 6f19259b-4bc3-4df7-8a09-765794883524
The GICD_IGROUPR0 is banked for each connected processor. It means the
Non-Secure bits for the PPIs (Private Peripheral Interrupts) must be
configured for every processor.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13135 6f19259b-4bc3-4df7-8a09-765794883524
Because this driver can be used for different purposes (Terminal, Debug port, communication),
its initialization function has been extended to accept additional settings.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13071 6f19259b-4bc3-4df7-8a09-765794883524
CFI Flash differentiates DeviceBaseAddress with BlockAddress in
its protocol. The DeviceBaseAddress was not considered in the
previous version of this driver.
This version also fixes some bugs in the implementation of the
CFI protocol.
This new version also uses the Boot Mode Hob to reinitialized the
FVB when Boot Mode is equal to BOOT_WITH_DEFAULT_SETTINGS.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13064 6f19259b-4bc3-4df7-8a09-765794883524
Memory map remapping is a platform specific feature only enabled by some platforms.
Instead of keeping this function empty for most platforms, the function has been
removed. This feature can easily fit in any other ArmPlatformLib function.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12632 6f19259b-4bc3-4df7-8a09-765794883524
This change does not make possible to disable Trustzone from the firmware.
The firmware has to be built for Trustzone support enabled or disabled.
The memory page table are now defined as 'Normal Memory' in any case.
Except for RTSM Device Memory which as to be Secure Device Memory due
to a RTSM bug.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12452 6f19259b-4bc3-4df7-8a09-765794883524
This library hides where the 'XIP' Global Variable are located in the memory.
It is expected the Sec/PrePi modules define the Global Variable area through
the GlobalVariable HOB.
The ArmPlatformGlobalVariableLib library allows access to global variables by
their offsets in this region.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12420 6f19259b-4bc3-4df7-8a09-765794883524
On MpCore system, the primary core can now be any core of the system.
To identify the primary core, you can use 'gArmTokenSpaceGuid.PcdArmPrimaryCoreMask'
and 'gArmTokenSpaceGuid.PcdArmPrimaryCore'.
These PCDs by default use the ClusterId and CoreId to identify the core. And the
primary core is defined as the ClusetrId=0 and CoreId=0.
The helper macros are: IS_PRIMARY_CORE(MpId), GET_CORE_ID(MpId), GET_CLUSTER_ID(MpId),
GET_CORE_POS(MpId), PRIMARY_CORE_ID.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12412 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
Leif Lindholm
Olivier Martin
Ronald Cron
Harry Liebel
oliviermartin