This change introduces default values for the PCDs PcdPrePiCpuMemorySize & PcdPrePiCpuIoSize.
These values are for the architectures ARM, AARCH64, IA32 and X64.
The redefinition of these PCDs (with the same default values) have been removed from the DSC files.
Note: the default value for AARCH64 was 32. It was preventing to allocate buffer above the 32bit
address space.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14914 6f19259b-4bc3-4df7-8a09-765794883524
If the DRAM is remapped at 0x0 then we need to wake up the secondary cores from wfe
(waiting for the memory to be initialized) as the instruction is still in the remapped
flash region at 0x0 to make them jumping into the C-code which lives in the NOR1 at 0x44000000 before
the region 0x0 is remapped as DRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14910 6f19259b-4bc3-4df7-8a09-765794883524
If EDK2_ARMVE_STANDALONE is not defined then the value is set to 1.
The developer has to explicit set the macro to zero to build a non standalone build.
It means this macro is always defined.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14906 6f19259b-4bc3-4df7-8a09-765794883524
The FVP Base Model has GICv3 support.
UEFI SEC does limited configuration of GICv3 if present. This is required for Linux to use GICv3.
UEFI itself uses the GICv3 in legacy mode (GICv2).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14824 6f19259b-4bc3-4df7-8a09-765794883524
The aim is to make this driver follows the ARM GIC specifications and
be implementation independent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14810 6f19259b-4bc3-4df7-8a09-765794883524
modified the comment which can mislead.
The "ldr r0, [r1]" is overrided with a immediate "mov ro, #3"
instruction. This mov instruction will over write the contents
of the ro register. So replacing 'mov' by 'orr' instruction would
prevent to override the original value.
This patch assumes mov is the right instruction to be retained
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Girish K S <ks.giri@samsung.com>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14606 6f19259b-4bc3-4df7-8a09-765794883524
This value was missing from the switch on 'ResetType'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14583 6f19259b-4bc3-4df7-8a09-765794883524
This PCD ensures the transition from EL3 to EL2 in ArmPlatformPkg/Sec.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14579 6f19259b-4bc3-4df7-8a09-765794883524
- Setting DVI fails on VE models. The FVP models behave the same.
These have updated SYS ID numbers and they need to be added to the
driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14564 6f19259b-4bc3-4df7-8a09-765794883524
ARM Versatile Express TC2 Core Tile has two profiles: the 1GB DRAM core tile or
the 2GB DRAM core tile profiles.
By default UEFI assumes, it is the 1GB core tile. In case of 2GB DRAM it declares
this additional 1GB resource system memory to UEFI. But the previous code did
not map this memory in the MMU Page Table.
So, the memory was allocatable by UEFI modules, but was not accessible by the CPU
(because not mapped).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <Leif.Lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14449 6f19259b-4bc3-4df7-8a09-765794883524
The syntax '!ifdef $(MACRO)' is deprecated and should be replaced by '!ifdef MACRO'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14440 6f19259b-4bc3-4df7-8a09-765794883524
This patch changes the Versatile Express A9 BSP to build with
EDK2_ARMVE_STANDALONE=1 as the default option.
The user may then specify zero if they wish to build the non-standalone
version.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14439 6f19259b-4bc3-4df7-8a09-765794883524
LibResetSystem was performing a cold reboot for both reboot and
shutdown.
This patch updates LibResetSystem to pass SYS_CFG_SHUTDOWN to the
microcontroller when called wit EfiResetShutdown.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14438 6f19259b-4bc3-4df7-8a09-765794883524
The size of the FDs did not match the FD layout.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14426 6f19259b-4bc3-4df7-8a09-765794883524
The FDT name are the one from Linaro release.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14348 6f19259b-4bc3-4df7-8a09-765794883524
This function allows platform to do any specific actions prior to
the start the PEI phase.
For instance, this function could be used by some platforms to initialize clocks that
are required at the early stage of the PEI phase.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14347 6f19259b-4bc3-4df7-8a09-765794883524
ArmPlatformGetPrimaryCoreMpId returns the MPID of the primary core.
The primary core might not be known at build time (eg: the platform allows
the boot CPU to be changed through board config).
This function is used during the secondary core stack initialization to know
the position of the secondary core in the SoC.
A secondary core that is at the position N, with N greater than the primary
core position, will be at the position N-1 in the list of secondary stacks
(the primary core has its own separate bigger stack).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14345 6f19259b-4bc3-4df7-8a09-765794883524
Checking if a core if the primary/boot core used to be done with the macro
IS_PRIMARY_CORE().
Some platforms exposes configuration registers to change the primary core.
Replacing the macro IS_PRIMARY_CORE() by ArmPlatformIsPrimaryCore() allows
some flexibility in the way to check the primary core.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14344 6f19259b-4bc3-4df7-8a09-765794883524
ArmPlatformGetAdditionalSystemMemory() function wasn't used anywhere in UEFI.
This patch deletes it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14270 6f19259b-4bc3-4df7-8a09-765794883524
Only the Cortex A9 based platforms have an external L2 controller.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14269 6f19259b-4bc3-4df7-8a09-765794883524
Setting bit4 of SCC register 48 now triggers the erasing of the memory region
reserved for variable storage in NOR flash and the restoration of the default
headers in flash.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14177 6f19259b-4bc3-4df7-8a09-765794883524
Formerly only the header was defined and it was expecting the SerialPortExtLib
interface to be implemented by SerialPortLib if supported. This behaviour was
not conform to the EDK2 framework.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14173 6f19259b-4bc3-4df7-8a09-765794883524
A ArmSmcLib Null implementation has also been added for CPU without the ARM Security
Extension (Trustzone support).
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14164 6f19259b-4bc3-4df7-8a09-765794883524
The new functions are:
- ArmPlatformStackSet(IN UINTN StackBase, IN UINTN MpId, IN UINTN PrimaryStackSize, IN UINTN SecondaryStackSize);
- ArmPlatformStackSetPrimary(IN UINTN StackBase, IN UINTN MpId, IN UINTN PrimaryStackSize, IN UINTN SecondaryStackSize);
- ArmPlatformStackSetSecondary(IN UINTN StackBase, IN UINTN MpId, IN UINTN PrimaryStackSize, IN UINTN SecondaryStackSize);
The stack topology can be changed by implementing a new ArmPlatformStackLib
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13774 6f19259b-4bc3-4df7-8a09-765794883524
On ARM PLatforms, there is no standard way to know how many cores are
available on the platform.
This PCD is expected to contain this number.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13769 6f19259b-4bc3-4df7-8a09-765794883524
This library could be used before the UEFI phases to expose the CPU state
when an unexpected exception interrupt the firmware.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13767 6f19259b-4bc3-4df7-8a09-765794883524
In case a DebugAgent library is supported for a specific debugger, we would
expect the exception be caught by DebugAgentLib.
The DebugAgentBaseLib exposes the cause of the exception to the user in the
Serial Terminal.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13765 6f19259b-4bc3-4df7-8a09-765794883524
The function only used in Secure Firmware used to be mixed with
the Non-Secure/Normal functions in ArmPlatformLib.
When the Secure Firmware was not required for some platforms (eg:
BeagleBoard), these functions were empty functions.
This new interface has been created to clean the ArmPlatformLib
interface between the SEC and PEI phases.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13260 6f19259b-4bc3-4df7-8a09-765794883524
The 'NS' bit must only be set in Secure world to define the Non-Secure region
of the Non-Secure World.
This bit must not be set in Non-Secure World.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13252 6f19259b-4bc3-4df7-8a09-765794883524
- ArmPlatformNormalInitialize() has been renamed into ArmPlatformInitialize()
- Make the function be called at the early stage of the PEI phase as some
platforms require their interconnects or clocks to be initialize before any
access to Timers or UARTs.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13245 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin
Girish K S
Harry Liebel
Ryan Harkin
oliviermartin