Add more CPU ID which can support SmmFeatureControl,
according to IA32 SDM.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If APIC ID values are changed during AP functions execution, we need to update
new APIC ID values in local data structure accordingly.
But if APIC mode change happened during AP function execution, we do not support
APIC ID value changed.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Current X2APIC is enabled in MpInitLib (used by CpuMpPei and CpuDxe) to follow
SDM suggestion. That means we only enable X2APIC if we found there are any
initial CPU ID value >= 255.
This patch is to provide one chance for platform to enable X2APIC even there is
no any initial CPU ID value >= 255.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=565
Fix NASM compatibility issues with XCODE5 tool chain.
The XCODE5 tool chain for X64 builds using PIE (Position
Independent Executable). For most assembly sources using
PIE mode does not cause any issues.
However, if assembly code is copied to a different address
(such as AP startup code in the MpInitLib), then the
X64 assembly source must be implemented to be compatible
with PIE mode that uses RIP relative addressing.
The specific changes in this patch are:
* Use LEA instruction instead of MOV instruction to lookup
the addresses of functions.
* The assembly function RendezvousFunnelProc() is copied
below 1MB so it can be executed as part of the MpInitLib
AP startup sequence. RendezvousFunnelProc() calls the
external function InitializeFloatingPointUnits(). The
absolute address of InitializeFloatingPointUnits() is
added to the MP_CPU_EXCHANGE_INFO structure that is passed
to RendezvousFunnelProc().
Cc: Andrew Fish <afish@apple.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=560
Update X64 NASM file to match IA32 NASM file
and use FINIT instruction instead of hand
assembled hex values for the FINIT instruction.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=556
NASM requires read-only data sections to use the section
name .rodata. This fix changes .rdata to .rodata.
The build failure from use of .rdata is seen when using
the XCODE5 tool chain.
Section "7.8.1 macho extensions to the SECTION Directive"
of the NASM documentation at http://www.nasm.us/doc/
describes the section name requirements.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=555
Add JMP instruction in SmiEntry.S file that is missing. This
updates SmiEntry.S to match the logic in SmiEntry.asm and
SmiEntry.nasm.
The default BUILDRULEORDER has .nasm higher priority than
.asm or .S, so this issue was not seen with MSFT or GCC
tool chain families. The XCODE5 tool chain overrides the
BUILDRULEORDER with .S higher than .nasm, so this issue
was only seen when using XCODE5 tool chain when IA32 SMM
is enabled.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If PcdCpuHotPlugSupport is TRUE, gSmst->NumberOfCpus will be the
PcdCpuMaxLogicalProcessorNumber. If gSmst->SmmStartupThisAp() is invoked for
those un-existed processors, ASSERT() happened in ConfigSmmCodeAccessCheck().
This fix is to check if ProcessorId is valid before invoke
gSmst->SmmStartupThisAp() in ConfigSmmCodeAccessCheck() and to check if
ProcessorId is valid in InternalSmmStartupThisAp() to avoid unexpected DEBUG
error message displayed.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The MTRR calculation algorithm contains a bug that when left
subtraction cannot produce better MTRR solution, it forgets
to restore the BaseAddress/Length so that MtrrLibGetMtrrNumber()
returns bigger value of actual required MTRR numbers.
As a result, the MtrrLib reports OutOfResource but actually the
MTRR is enough.
MEMORY_RANGE mC[] = {
0, 0x100000, CacheUncacheable,
0x100000, 0x89F00000, CacheWriteBack,
0x8A000000, 0x75000000, CacheUncacheable,
0xFF000000, 0x01000000, CacheWriteProtected,
0x100000000, 0x7F00000000, CacheUncacheable,
0xFC240000, 0x2000, CacheWriteCombining // <-- trigger the error
};
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
After X2APIC mode is enabled, APs need to be set tp IDLE state, otherwise APs
cannot be waken up by MP PPI services.
https://bugzilla.tianocore.org/show_bug.cgi?id=505
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
In PEI phase, BSP did not program vitural wired mode while APs did.
Move program virtual wired mode from CpuDxe to MpInitLib, thus it could benefit
on both CpuDxe and CpuMpPei.
https://bugzilla.tianocore.org/show_bug.cgi?id=496
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Because we will always borrow the AP reset vector space for AP waking up. We
needn't allocate such range to prevent other module to use it. It could simply
the code.
https://bugzilla.tianocore.org/show_bug.cgi?id=500
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If APs is in HLT-LOOP mode, we need AP reset vector for waking up APs. This
updating is to save/restore original contents of AP reset vector around waking
up APs always.
https://bugzilla.tianocore.org/show_bug.cgi?id=500
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
SMM BSP's *busy* state should be acquired. We could use AcquireSpinLock()
instead of AcquireSpinLockOrFail().
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Consuming PeCoffSerachImageBase() from PeCoffGetEntrypointLib and consuming
DumpCpuContext() from CpuExceptionHandlerLib to replace its own implementation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Export DumpCpuCotext() to display CPU Context. We will invoke
PeCoffGetEntrypointLib's PeCoffSerachImageBase() to get PE/COFF image base.
Display exception data bit value for page fault exception.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
SmmProfile feature required to protect all SMM ranges by structure
mProtectionMemRangeTemplate. This update is to add additonal save SMM ranges
into mProtectionMemRangeTemplate besides the range specified by
mCpuHotPlugData.SmrrBase/mCpuHotPlugData.SmrrSiz.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Internal function IsInSmmRanges() is added t check SMM range by saved SMM ranges
beside by mCpuHotPlugData.SmrrBase/mCpuHotPlugData.SmrrSiz.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The new algorithm finds out the more optimal MTRR solution for
current memory type settings.
Compare against the original algorithm, the new one guarantees
to find the correct MTRR solution, but doesn't guarantee to
find the most optimal MTRR solution.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
If CR0 PG bit is not set, it means paging is not enabled on BSP. Thus, Execute
Disable feature is not working actually. Thus, we cannot enable it on APs.
v2:
Correct the commit log.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Correct PCD declaration comments and add new PCDs in UNI file.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Using one specific name for global variable to save MP services protocol
pointer.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The current CPU_REGISTER_TABLE_ENTRY structure only defined UINT32 Index to
indicate MSR/MMIO address. It's ok for MSR because MSR address is UINT32 type
actually. But for MMIO address, UINT32 limits MMIO address exceeds 4GB.
This update on CPU_REGISTER_TABLE_ENTRY is to add additional UINT32 field
HighIndex to indicate the high 32bit MMIO address and original Index still
indicate the low 32bit MMIO address.
This update makes use of original padding space between ValidBitLength and
Value to add HighIndex.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The input parameter Index of PreSmmCpuRegisterTableWrite() and
CpuRegisterTableWrite() is defined as UINT32. Index is MSR/MMIO address that
will be saved in CPU register table. UINT32 blocks the MMIO address > 4GB.
This fix is to define Index to UINT64 instead of UINT32.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
CpuFeatureEntry will be set before using it. But VS2012 build reported the build
warning "potentially uninitialized local variable 'CpuFeatureEntry' used".
This fix is to set CpuFeatureEntry initial value and add ASSERT check later.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
They will consume Register CPU Features library to detect and initialize CPU
features.
CpuFeaturesPei driver is used to initialize CPU features in PEI phase.
CpuFeaturesDxe driver is used to initialize CPU features in DXE phase.
Add PcdCpuFeaturesInitAfterSmmRelocation and PcdCpuFeaturesInitOnS3Resume
that consumed by CpuFeaturesPei and CpuFeaturesDxe.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
This NULL CPU common Features Library instance will register some CPU features
defined in Intel(R) 64 and IA-32 Architectures Software Developer's Manual,
Volume 3, September 2016, Chapter 35 Model-Specific-Registers (MSR).
Add PCD PcdCpuClockModulationDutyCycle and PcdIsPowerOnReset consumed by NULL
CPU Common Features Library instance.
v2:
1. Using MSR_IA32_EFER to enable/disable NX feature instead of using
MSR_IA32_MISC_ENABLE.
2. Fix bug that SMX and VMX feature is swapped.
v3:
1. Add AesniGetConfigData() to get current register state.
v5:
Move MSR reading from AesniGetConfigData() to AesniSupport().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PEI Register CPU Features Library instance is used to register/manager/program
CPU features on PEI phase.
DXE Register CPU Features Library instance is used to register/manager/program
CPU features on DXE phase.
v2:
Format debug messages.
v3:
Trim white space at end of line.
v4:
Remove unused local variable.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Register CPU Features Library is used to register/manage/program CPU features.
NULL CPU features library instance could consume it register CPU features
functions.
CPU Feature module could consume this library to detect/analysis/program CPU
features on BSP/APs.
v4:
Fix GCC build issue.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
GUID gEdkiiCpuFeaturesInitDoneGuid is used to indicate if CPU features have been
initialized.
On PEI phase, one gEdkiiCpuFeaturesInitDoneGuid PPI will be installed after CPU
features initialized.
On DXE phase, one gEdkiiCpuFeaturesInitDoneGuid Protocol will be installed after
CPU features initialized.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
GUID gEdkiiCpuFeaturesSetDoneGuid is used to indicate if CPU feature related
setting are set finished. For example, PCD PcdCpuFeaturesUserConfiguration.
On PEI phase, one gEdkiiCpuFeaturesSetDoneGuid PPI will be installed after
platform set CPU feature setting.
On DXE phase, one gEdkiiCpuFeaturesSetDoneGuid Protocol will be installed after
platform set CPU feature setting.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
PcdCpuFeaturesSupport supports PcdsFixedAtBuild/PcdsPatchableInModule types and
used to add/remove CPU feature from firmware during build time.
PcdCpuFeaturesUserConfiguration supports all PCD types and used to configurate
CPU features by platforms.
PcdCpuFeaturesCapability supports PcdsDynamic PCD and used to indicate the CPU
features capability on processors.
PcdCpuFeaturesSetting supports PcdsDynamic PCD and used to indicate the current
CPU features setting on processors.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
All model-specific MSRs are related to processor signatures that are defined in
each section in Chapter 35 Model-Specific-Registers (MSR), Intel(R) 64 and
IA-32 Architectures Software Developer's Manual, Volume 3, September 2016.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Needn't to copy register table if AllocatedSize is 0.
v4:
Fix potential uninitialized variable issue.
v5:
Set DestinationRegisterTableList[Index].RegisterTableEntry before
RegisterTableEntry is updated.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If PCD PcdCpuS3DataAddress is set before, CpuS3DataDxe should get RegisterTable
and PreSmmRegisterTable from existing PCD pointed buffer and needn't to allocate
new buffer for RegisterTable and PreSmmRegisterTable.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Current RegisterTableEntry filed in CPU_REGISTER_TABLE is one pointer to
CPU_REGISTER_TABLE_ENTRY. If CPU register table wants to be passed from 32bit
PEI to x64 DXE/SMM, x64 DXE/SMM cannot get the correct RegisterTableEntry.
This update is to update RegisterTableEntry type to EFI_PHYSICAL_ADDRESS and
make RegisterTableEntry is fixed length.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The architectural MSR MSR_IA32_MISC_ENABLE is not supported by AMD processors.
Because reading CPUID.80000001H:EDK[20] is enough to check if XD feature is
supported or not, we just remove checking MSR_IA32_MISC_ENABLE(0x1A0).
Cc: Anthony PERARD <anthony.perard@citrix.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The commit is a follow-up of commit 8491e30.
In file MpService.c line 786:
Pte[Index] = (UINT64)((UINTN)PageTable + EFI_PAGE_SIZE * (Index + 1)) |
mAddressEncMask ...
(Where PageTable is of type VOID*, Index is of type UINTN, mAddressEncMask
is of type UINT64 and Pte[Index] is of type UINT64.)
Since in this case, the code logic ensures that the expression will not
exceed the range of UINTN, the commit will remove the explicit type cast
'(UINT64)'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when page tables entries are created or modified.
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
There are cases that the operands of an expression are all with rank less
than UINT64/INT64 and the result of the expression is explicitly cast to
UINT64/INT64 to fit the target size.
An example will be:
UINT32 a,b;
// a and b can be any unsigned int type with rank less than UINT64, like
// UINT8, UINT16, etc.
UINT64 c;
c = (UINT64) (a + b);
Some static code checkers may warn that the expression result might
overflow within the rank of "int" (integer promotions) and the result is
then cast to a bigger size.
The commit refines codes by the following rules:
1). When the expression is possible to overflow the range of unsigned int/
int:
c = (UINT64)a + b;
2). When the expression will not overflow within the rank of "int", remove
the explicit type casts:
c = a + b;
3). When the expression will be cast to pointer of possible greater size:
UINT32 a,b;
VOID *c;
c = (VOID *)(UINTN)(a + b); --> c = (VOID *)((UINTN)a + b);
4). When one side of a comparison expression contains only operands with
rank less than UINT32:
UINT8 a;
UINT16 b;
UINTN c;
if ((UINTN)(a + b) > c) {...} --> if (((UINT32)a + b) > c) {...}
For rule 4), if we remove the 'UINTN' type cast like:
if (a + b > c) {...}
The VS compiler will complain with warning C4018 (signed/unsigned
mismatch, level 3 warning) due to promoting 'a + b' to type 'int'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when page tables entriees are created or modified.
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
This PCD holds the address mask for page table entries when memory
encryption is enabled on AMD processors supporting the Secure Encrypted
Virtualization (SEV) feature.
The mask is applied when page tables are created (S3Resume.c).
CC: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Platform PEI may add LOCAL APIC memory mapped space into
EFI_HOB_MEMORY_ALLOCATION. Or platform may allocate this range before.
So, we skip AllocateMemorySpace()'s return status checking. Instead, we add one
DEBUG message for possible trace.
https://bugzilla.tianocore.org/show_bug.cgi?id=390
This updating is suggested by Ersek's comments at
https://www.mail-archive.com/edk2-devel@lists.01.org/msg22585.html
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Current CpuGetTimerValue() implementation return hard code TimerPeriod value. We
could calculate the actual TimerPeriod value over period of time (100us) at the
first time invoking CpuGetTimerValue() and save the TimerPeriod value into one
global variable to avoid delay at the next CpuGetTimerValue() invoking.
https://bugzilla.tianocore.org/show_bug.cgi?id=382
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
Local APIC memory mapped space should be added into GCD and be allocated.
Otherwise, UEFI firmware cannot get correct memory map for it. For example,
SMM profile feature needs to get the completed MMIO map to protect them.
v2:
Consume AddMemoryMappedIoSpace() to handle the case that Local APIC
memory space has already been added before.
https://bugzilla.tianocore.org/show_bug.cgi?id=390
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Add memory attribute setting in CpuArch protocol.
Previous SetMemoryAttributes() API only supports cache attribute setting.
This patch updated SetMemoryAttributes() API to support memory attribute
setting by updating CPU page table.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
X64\ExceptionHandlerAsm.S define MARCO to set up 32 IDT entries header.
It assume GCC compiler will generate the same code length on the following
instrction for each IDT entry.
jmp ASM_PFX(CommonInterruptEntry)
It works with GCC 4.x. However, GCC 5.4 will generate different code size of IDT
entry code per the offset value from CommonInterruptEntry address. We should use
DB to make sure each IDT entry header has the same size whatever compiler
version.
.ASM and .nasm used the different solution and do not have this issue.
https://bugzilla.tianocore.org/show_bug.cgi?id=389
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IO_PPI supports Fifo types by invoking the Fifo routines in the
new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The Fifo routines from the UefiCpuPkg/CpuIo2Dxe driver have been
moved to the new BaseIoLibIntrinsic (IoLib class) library.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
This fix is to pass VS2010/VS2012 build.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
We need to set new AP to idle state if it is expected to be waken up by new BSP
later.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
We need to disable system timer interrup to avoid generating the pending
interrupt on the old BSP.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
We need to swap local APIC timer interrupt state between old BSP and new BSP.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
During switching BSP phase, we need to disable CPU interruput to prevent stack
crashed by Timer interrupt handle. But when we enabled source debugging feature,
debug timer interrupt handler (existing on both PEI and DXE) also could crash
the stack used during switching BSP. So,we need to move save/restore interrupt
to SwitchBSPWorker().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
If APs are waken up by INIT-SIPI-SIPI command, they will lose original local
APIC timer setting. As a result, the timer library instance based on local APIC
timer cannot work on APs function.
This fix is to save BSP's local APIC timer settings before waking up APs and
to sync to APs when APs wakeup by INIT-SIPI-SIPI command.
Setting BSP's current counter to AP's initial counter could make sure BSP and
APs have same counter value across BSP switching.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
The current DxeDebugAgentLib supports source debugging on AP function. This
update is to update DxeMpInitLib to consume Debug Agent Library by
DEBUG_AGENT_INIT_DXE_AP flag. Thus, we could source debugging AP function
invoked by CPU MP Protocol.
However, current SecPeiDebugAgentLib does not support source debugging on AP
function invoked by CPU MP PPI. I have submitted one bugzilla to add this
support at https://bugzilla.tianocore.org/show_bug.cgi?id=308.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Support the case that BSP and AP are using different Microcode.
The previous logic validates new MCU on BSP only.
The enhanced logic will validate MCU on every BSP and AP.
As long as one processor loads the MCU successfully, it will be updated.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
The patch updated MicrocodeWrite() to move the Microcode replacement logic
to a standalone function - UpdateMicrocodeFlashRegion().
More detail description is added in UpdateMicrocodeFlashRegion()
to improve readability.
The Microcode information is collected in InitializeMicrocodeDescriptor(),
so that FmpGetImage() can get the info directly.
MicrocodeRead() is not needed any more.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add PcdCpuSmmStmExceptionStackSize/PcdCpuMsegSize prompt and help
string to uni file.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
This patch sets the normal OS buffer EfiLoaderCode/Data,
EfiBootServicesCode/Data, EfiConventionalMemory, EfiACPIReclaimMemory
to be not present after SmmReadyToLock.
To access these region in OS runtime phase is not a good solution.
Previously, we did similar check in SmmMemLib to help SMI handler
do the check. But if SMI handler forgets the check, it can still
access these OS region and bring risk.
So here we enforce the policy to prevent it happening.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add a new instances of the SmmCpuFeaturesLib that is used by
platforms to enable the SMI Transfer Monitor(STM) feature.
This new instance is in the same directory as the default
SmmCpuFeaturesLib instance in order to share source files.
The DSC file is updated to build both SmmCpuFeatureLib
instances and to build two versions of the PiSmmCpuDxeSmm
module using each of the SmmCpuFeatureLib instances.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Jiewen Yao
Jeff Fan
Michael Kinney
Ruiyu Ni
Dandan Bi
Hao Wu
Leo Duran