RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
There are 2 configurations for TDVF to upstream. See below link for
the definitions of the 2 configurations.
https://edk2.groups.io/g/devel/message/76367
This patch-set is to enable the basic feature of Config-B in OvmfPkg.
- Add a standalone IntelTdxX64.dsc to a TDX specific directory for a
*full* feature TDVF. (Align with existing SEV)
- IntelTdx.dsc includes Tdx/Legacy OVMF basic boot capability. The
final binary can run on Tdx/Legacy OVMF.
- PEI phase is skipped.
By design in Config-B there should be more advanced features, such as:
- RTMR based measurement and measure boot.
- Remove unnecessary drivers to reduce attack surface, such as
network stack.
To make the code review more efficiency, Config-B is split into 2 waves:
- Basic feature of Config-B
- Advanced feature of Config-B
This patch contains 2 files (IntelTdxX64.dsc/IntelTdxX64.fdf) which
enable the basic feature of Config-B. In the waves of Advanced feature
of Config-B, we will re-visit these 2 files.
TDX_PEI_LESS_BOOT is defined in IntelTdxX64.dsc to indicate it boots up
without PEI phase.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Host VMM may inject OptionRom which is untrusted in Td guest. So PCI
OptionRom needs to be ignored if it is Td guest. According to
"Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage"
PI spec 1.7, type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
MMIO64_PREFERENCE is a fixed length data structure which contains one
AddressSpaceDesc and one EndDesc. This patch removes MMIO64_PREFERENCE
and create AddressSpaceDesc and EndDesc respectively. This change
gives the chance to add more AddressSpaceDesc when CheckDevice is
called.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The entrypoint of DxeAcpiTimerLib checks HostBridgeDevId by reading
PcdOvmfHostBridgePciDevId. If the DevId is not set, ASSERT is
triggered. Normally this DevId is set in PlatformPei which is executed
in PEI phase.
This patch-set is introducing PEI-less boot which means PEI phase is
skipped. So there is no chance to set this DevId. Instead HostBridgeDevId
is set in PlatformInfoHob. So we can check if PlatformInfoHob exists and
if HostBridgeDevId is set in this Hob.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
TDX_PEI_LESS_BOOT indicates the boot without PEI phase. In this case
settings in EFI_HOB_PLATFORM_INFO should be set to its according PCDs.
TdxDxe driver is workable for both Legacy guest and Tdx guest. It is
because for Legacy guest (in PEI-less boot) there should be a place
to set the PCDs based on EFI_HOB_PLATFORM_INFO hob. TdxDxe driver is
the right place to do this work.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
OvmfPkg/IntelTdx/Sec is a simplied version of OvmfPkg/Sec. There
are below differences between these 2 Sec
- IntelTdx/Sec only supports Legacy guest and Tdx guest in X64.
- IntelTdx/Sec calls PeilessStartup () to jump from SEC to DXE directly.
- IntelTdx/Sec uses MemoryAllocationLib / HobLib / PrePiLib in
EmbeddedPkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
PeilessStarupLib provides a function (PeilessStartup) which brings
up both Legacy and Tdx guest from SEC phase to DXE phase. PEI phase
is skipped so that the attack surfaces are reduced as much as possible.
PeilessStartup() does below tasks:
1. Contruct the FW hoblist.
Since PEI is skipped, we must find a memory region which is the
largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
2. Initialize the platform.
3. Build various Hobs, such as SecFv Hob, DxeFv Hob, Stack Hob, etc.
4. At last DXE Core is located / loaded and transfer control to it.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
This library sets / gets the Hob list pointer in TDX_WORK_AREA.
This is because it is designed to be used in SEC where the value of
global variable cannot be saved, so the Hob list pointer is saved
in TDX_WORK_AREA.
TDX_WORK_AREA shares the same base address as SEV_WORK_AREA which is
pointed by PcdSevEsWorkAreaBase. This PCD will be renamed to
PcdCcWorkAreaBase as Gerd suggested.
See https://edk2.groups.io/g/devel/message/86642
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Add the TDX work area definition.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3711
Discussion in https://bugzilla.tianocore.org/show_bug.cgi?id=1496 shows
that 8254TimerDxe was not written for OVMF. It was moved over from
PcAtChipsetPkg to OvmfPkg in 2019. Probably because OVMF was the only
user left.
Most likely the reason OVMF used 8254TimerDxe initially was that it could
just use the existing driver in PcAtChipsetPkg. And it simply hasn't
been changed ever.
CSM support was moved in 2019 too. (CSM support depends on 8254/8259
drivers). So 8254TimerDxe will be used when CSM_ENABLE=TRUE.
There are 4 .dsc which include the 8254Timer.
- OvmfPkg/AmdSev/AmdSevX64.dsc
- OvmfPkg/OvmfPkgIa32.dsc
- OvmfPkg/OvmfPkgIa32X64.dsc
- OvmfPkg/OvmfPkgX64.dsc
For the three OvmfPkg* configs using 8254TimerDxe with CSM_ENABLE=TRUE
and LapicTimerDxe otherwise.
For the AmdSev config it doesn't make sense to support a CSM. So use
the lapic timer unconditionally.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3711
XenTimerDxe is a local Apic timer driver and it has nothing to do
with Xen. So rename it to LocalApicTimerDxe.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
The current IoMmuDxe driver supports DMA operations inside SEV guest.
To support DMA operation in TDX guest,
CC_GUEST_IS_XXX (PcdConfidentialComputingGuestAttr) is used to determine
if it is SEV guest or TDX guest.
Due to security reasons all DMA operations inside the SEV/TDX guest must
be performed on shared pages. The IOMMU protocol driver for the SEV/TDX
guest uses a bounce buffer to map guest DMA buffer to shared pages in
order to provide the support for DMA operations inside SEV/TDX guest.
The call of SEV or TDX specific function to set/clear EncMask/SharedBit
is determined by CC_GUEST_IS_XXX (PcdConfidentialComputingGuestAttr).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In the previous QemuFwCfgDxe only SEV is supported. This commit
introduce TDX support in QemuFwCfgDxe.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
TdxDxe driver is dispatched early in DXE, due to being list in APRIORI.
This module is responsible for below features:
- Sets max logical cpus based on TDINFO
- Sets PCI PCDs based on resource hobs
- Set shared bit in MMIO region
- Relocate Td mailbox and set its address in MADT table.
1. Set shared bit in MMIO region
Qemu allows a ROM device to set to ROMD mode (default) or MMIO mode.
When it is in ROMD mode, the device is mapped to guest memory and
satisfies read access directly.
In EDK2 Option ROM is treated as MMIO region. So Tdx guest access
Option ROM via TDVMCALL(MMIO). But as explained above, since Qemu set
the Option ROM to ROMD mode, the call of TDVMCALL(MMIO) always return
INVALID_OPERAND. Tdvf then falls back to direct access. This requires
to set the shared bit to corresponding PageTable entry. Otherwise it
triggers GP fault.
TdxDxe's entry point is the right place to set the shared bit in MMIO
region because Option ROM has not been discoverd yet.
2. Relocate Td mailbox and set the new address in MADT Mutiprocessor
Wakeup Table.
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
TdxDxe registers for protocol notification
(gQemuAcpiTableNotifyProtocolGuid) to call the AlterAcpiTable(), in
which MADT table is altered by the above Mailbox address. The protocol
will be installed in AcpiPlatformDxe when the MADT table provided by
Qemu is ready. This is to maintain the simplicity of the AcpiPlatformDxe.
AlterAcpiTable is the registered function which traverses the ACPI
table list to find the original MADT from Qemu. After the new MADT is
configured and installed, the original one will be uninstalled.
[ACPI] https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model
/ACPI_Software_Programming_Model.html#multiprocessor-wakeup-structure
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Add Intel Tdx helper library. The library provides the routines to:
- set or clear Shared bit for a given memory region.
- query whether TDX is enabled.
Please be noted, there a lot of duplicated codes for Page Table
operations. These codes should be moved to a common library
(PageTablesLib) so that it is more friendly for review and maintain.
There is a new feature requirement
https://bugzilla.tianocore.org/show_bug.cgi?id=847 which is to
implement the library. After the lib is introduced, BaseMemEncryptTdxLib
will be refactored.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
To maintain the simplicity of the AcpiPlatformDxe, the MADT ACPI table
will be altered in another driver (TdxDxe) by installing a protocol
to notify that the ACPI table provided by Qemu is ready. Then in TdxDxe
a notification functioin will be called to alter the MADT table to recorded
the mailbox address.
The protocol is gQemuAcpiTableNotifyProtocolGuid.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
OvmfPkg/PlatformPei is updated to support Tdx guest. There are below
major changes.
- Set Tdx related PCDs
- Publish Tdx RamRegions
In this patch there is another new function BuildPlatformInfoHob ().
This function builds EFI_HOB_PLATFORM_INFO which contains the
HostBridgeDevId. The hob is built in both Td guest and Non-Td guest.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
There are below changes in PlatformInitLib for Tdx guest:
1. Publish ram regions
In Tdx guest, the system memory is passed in TdHob by host VMM. So
the major task of PlatformTdxPublishRamRegions is to walk thru the
TdHob list and transfer the ResourceDescriptorHob and MemoryAllocationHob
to the hobs in DXE phase.
2. Build MemoryAllocationHob for Tdx Mailbox and Ovmf work area.
3. Update of PlatformAddressWidthInitialization. The physical
address width that Tdx guest supports is either 48 or 52.
4. Update of PlatformMemMapInitialization.
0xA0000 - 0xFFFFF is VGA bios region. Platform initialization marks the
region as MMIO region. Dxe code maps MMIO region as IO region.
As TDX guest, MMIO region is maps as shared. However VGA BIOS doesn't need
to be shared. Guest TDX Linux maps VGA BIOS as private and accesses for
BIOS and stuck on repeating EPT violation. VGA BIOS (more generally ROM
region) should be private. Skip marking VGA BIOA region [0xa000, 0xfffff]
as MMIO in HOB.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Guest Physical Address (GPA) space in Td guest is divided into private
and shared sub-spaces, determined by the SHARED bit of GPA. This PCD
holds the shared bit mask. Its default value is 0 and it will be set
in PlatformPei driver if it is of Td guest.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
If TDX is enabled then we do not support DMA operation in PEI phase.
This is mainly because DMA in TDX guest requires using bounce buffer
(which need to allocate dynamic memory and allocating a PAGE size'd
buffer can be challenge in PEI phase).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
There are below major changes in this commit.
1. SecEntry.nasm
In TDX BSP and APs goes to the same entry point in SecEntry.nasm.
BSP initialize the temporary stack and then jumps to SecMain, just as
legacy Ovmf does.
APs spin in a modified mailbox loop using initial mailbox structure.
Its structure defition is in OvmfPkg/Include/IndustryStandard/IntelTdx.h.
APs wait for command to see if the command is for me. If so execute the
command.
2. Sec/SecMain.c
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the major task of this patch is to process the TdHobList
to accept the memory. After that TDVF follow the standard OVMF flow
and jump to PEI phase.
PcdUse1GPageTable is set to FALSE by default in OvmfPkgX64.dsc. It gives
no chance for Intel TDX to support 1G page table. To support 1G page
table this PCD is set to TRUE in OvmfPkgX64.dsc.
TDX_GUEST_SUPPORTED is defined in OvmfPkgX64.dsc. This macro wraps the
Tdx specific code.
TDX only works on X64, so the code is only valid in X64 arch.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Declare the local variables in SecCoreStartupWithStack that actually
move the data elements as volatile to prevent the optimizer from
replacing this function with the intrinsic memcpy().
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the newly added function (ProcessTdxHobList) is to process
the TdHobList to accept the memory. Because TdHobList is provided by
host VMM which is not trusted, so its content should be checked before
it is consumed by TDVF.
Because ProcessTdxHobList is to be called in SEC phase, so
PlatformInitLib.inf is updated to support SEC.
Note: In this patch it is BSP which accepts the pages. So there maybe
boot performance issue. There are some mitigations to this issue, such
as lazy accept, 2M accept page size, etc. We will re-visit here in the
future.
EFI_RESOURCE_MEMORY_UNACCEPTED is a new ResourceType in
EFI_HOB_RESOURCE_DESCRIPTOR. It is defined for the unaccepted memory
passed from Host VMM. This is proposed in microsoft/mu_basecore#66
files#diff-b20a11152d1ce9249c691be5690b4baf52069efadf2e2546cdd2eb663d80c9
e4R237 according to UEFI-Code-First. The proposal was approved in 2021
in UEFI Mantis, and will be added to the new PI.next specification.
Per the MdePkg reviewer's comments, before this new ResourceType is
added in the PI spec, it should not be in MdePkg. So it is now
defined as an internal implementation and will be moved to
MdePkg/Include/Pi/PiHob.h after it is added in PI spec.
See https://edk2.groups.io/g/devel/message/87641
PcdTdxAcceptPageSize is added for page accepting. Currently TDX supports
4K and 2M accept page size. The default value is 2M.
Tdx guest is only supported in X64. So for IA32 ProcessTdxHobList
just returns EFI_UNSUPPORTED.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
MiscInitialization is split into 2 functions:
- PlatformMiscInitialization is for PlatformInitLib.
- MiscInitialization calls PlatformMiscInitialization and then sets
PCD. It is for PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
MemMapInitialization is split into 2 functions:
- PlatformMemMapInitialization is for PlatformInfoLib
- MemMapInitialization calls PlatformMemMapInitialization and then
sets PCDs. It is for PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
InitializeRamRegions is refactored into 3 calls:
- PlatformQemuInitializeRam
- SevInitializeRam
- PlatformQemuInitializeRamForS3
SevInitializeRam is not in PlatformInitLib. Because in the first stage
PlatformInitLib only support the basic platform featues.
PlatformQemuInitializeRamForS3 wraps the code which was previously in
InitializeRamRegions (many code in 2 if-checks).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
From this patch we start to restruct the functions which set PCDs into
two, one for PlatformInitLib, one for PlatformPei.
AddressWidthInitialization is the first one. It is splitted into two:
- PlatformAddressWidthInitialization is for PlatformInitLib
- AddressWidthInitialization is for PlatformPei. It calls
PlatformAddressWidthInitialization then set PCDs.
Below functions are also refined for PlatformInitLib:
- PlatformScanOrAdd64BitE820Ram
- PlatformGetSystemMemorySizeAbove4gb
- PlatformGetFirstNonAddress
All the SetPcd codes are removed from above functions.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
Refactor MiscInitialization for CloudHV to set PCD as other platforms
do. Because in the following patch we will split the functions which
set PCDs into two, one for PlatformInitLib, one for PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
In MiscInitialization Microvm looks a little weird. Other platforms
call PcdSet16S to set the PcdOvmfHostBridgePciDevId with the value same
as PlatformInfoHob->HostBridgeDevId. But Microvm doesn't follow this
way. In switch-case 0xffff is Microvm, but set with
MICROVM_PSEUDO_DEVICE_ID. So we have to add a new function
( MiscInitializationForMicrovm ) for Microvm and delete the code in
MiscInitialization.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
The intention of PlatformInitLib is to extract the common function used
in OvmfPkg/PlatformPei. This lib will be used not only in PEI phase but
also in SEC phase. SEC phase cannot use global variables between
different functions. So PlatformInfoHob is created to hold the
informations shared between functions. For example, HostBridgeDevId
corespond to mHostBridgeDevId in PlatformPei.
In this patch we will first move below global variables to
PlatformInfoHob.
- mBootMode
- mS3Supported
- mPhysMemAddressWidth
- mMaxCpuCount
- mHostBridgeDevId
- mQ35SmramAtDefaultSmbase
- mQemuUc32Base
- mS3AcpiReservedMemorySize
- mS3AcpiReservedMemoryBase
PlatformInfoHob also holds other information, for example,
PciIoBase / PciIoSize. This is because in SEC phase, PcdSetxxx
doesn't work. So we will restruct the functions which set PCDs
into two, one for PlatformInfoLib, one for PlatformPei.
So in this patch we first move global variables and PCDs to
PlatformInfoHob. All the changes are in OvmfPkg/PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
There are 3 variants of PlatformPei in OvmfPkg:
- OvmfPkg/PlatformPei
- OvmfPkg/XenPlatformPei
- OvmfPkg/Bhyve/PlatformPei/PlatformPei.inf
These PlatformPeis can share many common codes, such as
Cmos / Hob / Memory / Platform related functions. This commit
(and its following several patches) are to create a PlatformInitLib
which wraps the common code called in above PlatformPeis.
In this initial version of PlatformInitLib, below Cmos related functions
are introduced:
- PlatformCmosRead8
- PlatformCmosWrite8
- PlatformDebugDumpCmos
They correspond to the functions in OvmfPkg/PlatformPei:
- CmosRead8
- CmosWrite8
- DebugDumpCmos
Considering this PlatformInitLib will be used in SEC phase, global
variables and dynamic PCDs are avoided. We use PlatformInfoHob
to exchange information between functions.
EFI_HOB_PLATFORM_INFO is the data struct which contains the platform
information, such as HostBridgeDevId, BootMode, S3Supported,
SmmSmramRequire, etc.
After PlatformInitLib is created, OvmfPkg/PlatformPei is refactored
with this library.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In Tdx BSP may issues commands to APs for some task, for example, to
accept pages paralelly. BSP also need to wait until all the APs have
done the task. TdxMailboxLib wraps these common funtions for BSP.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
IntelTdx.h defines the defition used by TDX in OvmfPkg:
- Mailbox related defitions,such as the data structure, command code,
AP relocation defitions.
See Table 5.44 Multiprocessor Wakeup Mailbox Structure in below link.
https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model/
ACPI_Software_Programming_Model.html#multiprocessor-wakeup-structure
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The base VmgExitLib library provides a default limited interface to
handle #VE exception. To provide full support, the OVMF version of
VmgExitLib is extended to provide full support of #VE handler.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3890
The YAML file previously specified "windows-latest" which recently
moved to VS2022. To continue using VS2019 (at least in the short
term), the VM image needs to be explicitly set to "windows-2019".
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add some documentation to the CloudHv target in order to clarify how to
use it and what to expect from it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of using the CMOS, the CloudHv platform relies on the list of
memmap entries provided through the PVH boot protocol to determine the
last RAM address below 4G.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of hardcoding the address of the RSDP in the firmware, let's
rely on the PVH structure hvm_start_info to retrieve this information.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Following the model from the Xen target, CloudHv is generated as a PVH
ELF binary to take advantage of the PVH specification, which requires
less emulation from the VMM.
The fdf include file CloudHvElfHeader.fdf.inc has been generated from
the following commands:
$ gcc -D PVH64 -o elf_gen OvmfPkg/OvmfXenElfHeaderGenerator.c
$ ./elf_gen 4194304 OvmfPkg/CloudHv/CloudHvElfHeader.fdf.inc
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
CloudHv doesn't need any VARS store, and it doesn't need the CODE
section to be generated separately either. The only thing needed is to
generate a firmware binary that can be used by Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Updating the fdf include file based on the run of the ELF header
generator. The diff from this patch is the result of:
$ gcc -o elf_gen OvmfPkg/OvmfXenElfHeaderGenerator.c
$ ./elf_gen 2097152 OvmfPkg/XenElfHeader.fdf.inc
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of having the PVH ELF header part of the fdf file directly, we
move it to a dedicated include file. This is the first step in
automating the generation of the header.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Adding some flexibility to the program through optional parameters and
global define, so that other targets can use the generator.
* A global define is added so that we can choose at build time if we
want to use 32-bit or 64-bit base structures.
* A first optional parameter is added so the user can provide the
expected blob size of the generated binary.
* A second optional parameter is added so the user can specify an output
file to which the generated output will be printed.
The default behavior isn't modified.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3582
Improve the MemEncryptSev{Es,Snp}IsEnabled() to use the SEV_STATUS MSR
value saved in the workarea. Since workarea is valid until the PEI phase,
so, for the Dxe phase use the PcdConfidentialComputingGuestAttr to
determine which SEV technology is enabled.
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3582
In order to probe the SEV feature the BaseMemEncryptLib and Reset vector
reads the SEV_STATUS MSR. Cache the value on the first read in the
workarea. In the next patches the value saved in the workarea will
be used by the BaseMemEncryptLib. This not only eliminates the extra
MSR reads it also helps cleaning up the code in BaseMemEncryptLib.
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
The SNP patch series updated the OvmfPkgX64 build but forgot the AmdSev
variant, resulting in a broken OvmfSevMetadata table.
Fixes: cca9cd3dd6 ("OvmfPkg: reserve CPUID page")
Fixes: 707c71a01b ("OvmfPkg: reserve SNP secrets page")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3835
The commit ade62c18f4 caused a boot failure
when OVMF is build with SECURE_BOOT/SMM enabled.
This happen because the above commit extended the BaseMemEncryptSevLib.inf
to include VmgExitLib. The FvbServicesSmm uses the functions provided
by the MemEncryptSevLib to clear the memory encryption mask from the
page table. It created a dependency, as shown below
OvmfPkg/FvbServicesSmm.inf
---> MemEncryptSevLib class
---> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
---> VmgExitLib
---> "OvmfPkg/VmgExitLib" instance
---> LocalApicLib class
---> UefiCpuPkg/BaseXApicX2ApicLib/BaseXApicX2ApicLib.inf instance
---> TimerLib class
---> "OvmfPkg/AcpiTimerLib/DxeAcpiTimerLib.inf" instance
---> PciLib class
---> "OvmfPkg/DxePciLibI440FxQ35/DxePciLibI440FxQ35.inf" instance
The LocalApicLib provides a constructor, execution of the constructor
causes an exception. The SEV-ES and SEV-SNP do not support the SMM, so
skip including the VmgExitLib chain. Use the module override to use the
VmgExitLibNull to avoid the inclusion of unneeded LocalApicLib dependency
chain in FvbServicesSmm. We ran similar issue for AmdSevDxe driver,
see commit 19914edc5a
After the patch, the dependency look like this:
OvmfPkg/FvbServicesSmm.inf
---> MemEncryptSevLib class
---> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
---> VmgExitLib
---> "UefiCpuPkg/Library/VmgExitLibNull" instance
Fixes: ade62c18f4
Reported-by: Aaron Young <aaron.young@oracle.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
XCODE5 reported the following warning:
OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c:1895:12: note:
uninitialized use occurs here
Compacted
^^^^^^^^^
Initialize the 'Compacted' variable to fix the warning.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg.
RISC-V Virt platform can leverage the same library to access PCI Express
registers through PCI Express base address set in PcdPciExpressBaseAddress
and cached in a global variable.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Check whenever an EDID blob is present. In case it is get the display
resolution from it. Unless PcdVideoResolutionSource indicates the
display resolution has been set already, update
PcdVideoHorizontalResolution and PcdVideoVerticalResolution accordingly.
Also add the resolution to the mode list.
This will make OVMF boot up with the display resolution configured by
QEMU, which is 1280x800 by default. The resolution can be set using the
xres and yres properties. Here is an example for FullHD:
qemu-system-x86_64 -device VGA,xres=1920,yres=1080
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3778
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1749250
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add helper function to add a video mode to the list of modes.
Move code. Minor debug logging tweaks, no other functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
All video modes in the list are 32-bit,
so drop the useless ColorDepth field.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
struct QEMU_VIDEO_MODE_DATA has all the data needed to set the video
mode, there is no need to take the extra indirection and use
struct QEMU_VIDEO_BOCHS_MODES.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
It's a UINT8 (enum) PCD telling where the PcdVideoHorizontalResolution
and PcdVideoVerticalResolution values are coming from. It can be:
0 (unset aka default from dsc file), or
1 (from PlatformConfig), or
2 (set by Video Driver).
It will be used by video drivers to avoid overriding PlatformConfig
values, or override each others values in case multiple display devices
are present.
The underlying problem this tries to solve is that the GOP protocol has
no way to indicate the preferred video mode. On physical hardware this
isn't much of a problem because using the highest resolution available
works just fine as that is typically the native display resolution
But in a virtual machine you don't want come up with a huge 4k window by
default just because the virtual vga is able to handle that. Cutting
down the video mode list isn't a great solution either as that would
also remove the modes from the platform configuration so the user
wouldn't be able to pick a resolution higher than the default any more.
So with patch drivers can use use PcdVideoHorizontalResolution and
PcdVideoVerticalResolution to indicate what the preferred display
resolution is, without overwriting the user preferences from
PlatformConfig if present.
A possible alternative approach would be to extend the GOP protocol, but
I'm not sure this is a good plan given this is mostly a problem for
virtual machines and using PCDs allows to keep this local to OvmfPkg.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
[1] de72c4b7cd
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Adding the newly created target for Cloud Hypervisor to the CI,
validating it can be properly built.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't need the support for legacy BIOS, therefore the
CSM support can be removed.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate any USB controller or device, therefore
the support can be removed.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
No need for video or virtio-gpu support since Cloud Hypervisor doesn't
emulate any of these.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since Cloud Hypervisor doesn't rely on the FwCfg mechanism, remove the
libraries imports when possible.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Anything specific to the QEMU Q35 platform is not relevant for the
CloudHv target.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor does not emulate any 8259 PIC, therefore there's no
reason to load the corresponding driver for it.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate any LPC bridge, therefore we simply
need to rely on the serial I/O port to be connected as a console.
It reuses the code from Xen since it's very generic.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate the legacy 8254 PIT, which is why
instead of relying on it as the timer UEFI services, rely on the
XenTimerDxe implementation. This is not Xen specific, as it simply uses
the local APIC timer triggering interrupts on the vector 32.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding the new target CloudHvX64, copied directly from OvmfPkgX64. The
point is to create a target dedicated for Cloud Hypervisor rather than
trying to support both QEMU and Cloud Hypervisor on the same target.
Improvements and cleanups will be performed in follow up patches.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Mark the SEV launch secret MEMFD area as reserved, which will allow the
guest OS to use it during the lifetime of the OS, without creating
copies of the sensitive content.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.Yao@intel.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
For GPU passthrough support we have to initialize the console after
EfiBootManagerDispatchDeferredImages() has loaded ROMs, so call it after
this. This was the calling order before the TCG physical presence support
had to be moved and the console initialized earlier so user interaction
could be supported before processing TCG physical presence opcodes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Shivanshu Goyal <shivanshu3@gmail.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Rename TPM_ENABLE to TPM2_ENABLE so naming is in line with the
ArmVirtPkg config option name.
Add separate TPM1_ENABLE option for TPM 1.2 support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Split Tcg2ConfigPei.inf into two variants: Tcg12ConfigPei.inf with
TPM 1.2 support included and Tcg2ConfigPei.inf supporting TPM 2.0 only.
This allows x86 builds to choose whenever TPM 1.2 support should be
included or not by picking the one or the other inf file.
Switch x86 builds to Tcg12ConfigPei.inf, so they continue to
have TPM 1.2 support.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Drop TPM_CONFIG_ENABLE config option. Including TPM support in the
build without also including the TPM configuration menu is not useful.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
With this in place the tpm configuration is not duplicated for each of
our four ovmf config variants (ia32, ia32x64, x64, amdsev) and it is
easier to keep them all in sync when updating the tpm configuration.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Prefer the e820 map provided via qemu firmware config interface
for memory detection. Use rtc cmos only as fallback, which should
be rarely needed these days as qemu supports etc/e820 since 2013.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add a bool parameter to ScanOrAdd64BitE820Ram to explicitly specify
whenever ScanOrAdd64BitE820Ram should add HOBs for high memory (above
4G) or scan only.
Also add a lowmem parameter so ScanOrAdd64BitE820Ram
can report the memory size below 4G.
This allows a more flexible usage of ScanOrAdd64BitE820Ram,
a followup patch will use it for all memory detection.
No functional change.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add virtio-mmio support (VirtioMmioDeviceLib and VirtioFdtDxe).
With this patch added and a new enough qemu version (6.2+) edk2
will detect virtio-mmio devices, so it is possible to boot from
storage (virtio-blk, virtio-scsi) or network (virtio-net).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
FdtClient is unhappy without a device tree, so add an empty fdt
which we can use in case etc/fdt is not present in fw_cfg.
On ARM machines a device tree is mandatory for hardware detection,
that's why FdtClient fails hard.
On microvm the device tree is only used to detect virtio-mmio devices
(this patch series) and the pcie host (future series). So edk2 can
continue with limited functionality in case no device tree is present:
no storage, no network, but serial console and direct kernel boot
works.
qemu release 6.2 & newer will provide a device tree for microvm.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add fdt parser from EmbeddedPkg (FdtLib and FdtClientDxe) to MicrovmX64.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Building grub.efi for AmdSev is difficult because it depends on patches
not yet merged to upstream grub. So shortcut the grub build by simply
creating an empty grub.efi file. That allows to at least build-test the
AmdSev variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Skip the qemu boot test in case QEMU_SKIP is set to true.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Move SettingsManager and PlatformBuilder classes to PlatformBuildLib.py
file, keep only CommonPlatform class in PlatformBuild.py. Allows
reusing these classes for other builds. Pure code motion, no functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes build failure:
build.py...
/home/kraxel/projects/edk2/OvmfPkg/Bhyve/BhyveX64.dsc(...): error 1001: Module type [SEC] is not supported by library instance [/home/kraxel/projects/edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [/home/kraxel/projects/edk2/OvmfPkg/Sec/SecMain.inf]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In FvbInitialize Function,
PcdFlashNvStorageVariableBase64 PcdFlashNvStorageFtwWorkingBase
PcdFlashNvStorageFtwSpareBase will not exceed 0x100000000,
Due to truncation and variable type limitations.
That leads to the NV variable cannot be saved to the memory above 4G.
Modify as follows:
1.Remove the forced type conversion of UINT32.
2.Use UINT64 type variables.
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 202fb22be6 "OvmfPkg/SecMain: validate the memory used for
decompressing Fv" broke building OvmfXen with:
edk2/OvmfPkg/OvmfXen.dsc(...): error 1001: Module type [SEC] is not
supported by library instancer
[edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [edk2/OvmfPkg/Sec/SecMain.inf]
The above commit added a reference to MemEncryptSevLib into SecMain.inf,
but OvmfXen.dsc doesn't have a MemEncryptSevLib entry for SEC. Add one
like OvmfPkgX64.dsc has.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Adding support for retrieving the Cloud Hypervisor ACPI tables as a
fallback mechanism if tables are not found through fw_cfg.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Don't make the package Qemu centric so that we can introduce some
alternative support for other VMMs not using the fw_cfg mechanism.
This patch is purely about renaming existing files with no functional
change.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a fallback on the SMBIOS code to find the SMBIOS table for Cloud
Hypervisor if it couldn't be found for Qemu through fw_cfg.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the generic entry point part out of Qemu.c to anticipate the
addition of new ways of retrieving the SMBIOS table.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
PrintDxe produces gEfiPrint2ProtocolGuid and gEfiPrint2SProtocolGuid,
and those are consumed by the following PrintLib instance:
MdeModulePkg/Library/DxePrintLibPrint2Protocol/DxePrintLibPrint2Protocol.inf
However, none of the OVMF DSC files contain such a PrintLib class
resolution, so none of the OVMF platforms need PrintDxe.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3744
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Now that both the secrets and cpuid pages are reserved in the HOB,
extract the location details through fixed PCD and make it available
to the guest OS through the configuration table.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
When SEV-SNP is active, the CPUID and Secrets memory range contains the
information that is used during the VM boot. The content need to be persist
across the kexec boot. Mark the memory range as Reserved in the EFI map
so that guest OS or firmware does not use the range as a system RAM.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
The SetMemoryEncDec() is used by the higher level routines to set or clear
the page encryption mask for system RAM and Mmio address. When SEV-SNP is
active, in addition to set/clear page mask it also updates the RMP table.
The RMP table updates are required for the system RAM address and not
the Mmio address.
Add a new parameter in SetMemoryEncDec() to tell whether the specified
address is Mmio. If its Mmio then skip the page state change in the RMP
table.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSev{Set,Clear}PageEncMask() functions are used to set or
clear the memory encryption attribute in the page table. When SEV-SNP
is active, we also need to change the page state in the RMP table so that
it is in sync with the memory encryption attribute change.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Version 2 of the GHCB specification added the support to query the
hypervisor feature bitmap. The feature bitmap provide information
such as whether to use the AP create VmgExit or use the AP jump table
approach to create the APs. The MpInitLib will use the
PcdGhcbHypervisorFeatures to determine which method to use for creating
the AP.
Query the hypervisor feature and set the PCD accordingly.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MpInitLib uses the ConfidentialComputingAttr PCD to determine whether
AMD SEV is active so that it can use the VMGEXITs defined in the GHCB
specification to create APs.
Cc: Michael Roth <michael.roth@amd.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
When SEV-SNP is active, a memory region mapped encrypted in the page
table must be validated before access. There are two approaches that
can be taken to validate the system RAM detected during the PEI phase:
1) Validate on-demand
OR
2) Validate before access
On-demand
=========
If memory is not validated before access, it will cause a #VC
exception with the page-not-validated error code. The VC exception
handler can perform the validation steps.
The pages that have been validated will need to be tracked to avoid
the double validation scenarios. The range of memory that has not
been validated will need to be communicated to the OS through the
recently introduced unaccepted memory type
https://github.com/microsoft/mu_basecore/pull/66, so that OS can
validate those ranges before using them.
Validate before access
======================
Since the PEI phase detects all the available system RAM, use the
MemEncryptSevSnpValidateSystemRam() function to pre-validate the
system RAM in the PEI phase.
For now, choose option 2 due to the dependency and the complexity
of the on-demand validation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The VMM launch sequence should have pre-validated all the data pages used
in the Reset vector. The range does not cover the data pages used during
the SEC phase (mainly PEI and DXE firmware volume decompression memory).
When SEV-SNP is active, the memory must be pre-validated before the access.
Add support to pre-validate the memory range from SnpSecPreValidatedStart
to SnpSecPreValidatedEnd. This should be sufficent to enter into the PEI
phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The initial page built during the SEC phase is used by the
MemEncryptSevSnpValidateSystemRam() for the system RAM validation. The
page validation process requires using the PVALIDATE instruction; the
instruction accepts a virtual address of the memory region that needs
to be validated. If hardware encounters a page table walk failure (due
to page-not-present) then it raises #GP.
The initial page table built in SEC phase address up to 4GB. Add an
internal function to extend the page table to cover > 4GB. The function
builds 1GB entries in the page table for access > 4GB. This will provide
the support to call PVALIDATE instruction for the virtual address >
4GB in PEI phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSevSnpPreValidateSystemRam() is used for pre-validating the
system RAM. As the boot progress, each phase validates a fixed region of
the RAM. In the PEI phase, the PlatformPei detects all the available RAM
and calls to pre-validate the detected system RAM.
While validating the system RAM in PEI phase, we must skip previously
validated system RAM to avoid the double validation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide the hardware isolated
abstraction layers with a VM. The VMPL0 is the highest privilege, and
VMPL3 is the least privilege. Certain operations must be done by the
VMPL0 software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SEV-SNP support assumes that the guest is running on VMPL0.
Let's add function in the MemEncryptSevLib that can be used for checking
whether guest is booted under the VMPL0.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The guest can request the
hypervisor to add pages in the RMP table via the Page State Change VMGEXIT
defined in the GHCB specification section 2.5.1 and 4.1.6. Inside each RMP
entry is a Validated flag; this flag is automatically cleared to 0 by the
CPU hardware when a new RMP entry is created for a guest. Each VM page
can be either validated or invalidated, as indicated by the Validated
flag in the RMP entry. Memory access to a private page that is not
validated generates a #VC. A VM can use the PVALIDATE instruction to
validate the private page before using it.
During the guest creation, the boot ROM memory is pre-validated by the
AMD-SEV firmware. The MemEncryptSevSnpValidateSystemRam() can be called
during the SEC and PEI phase to validate the detected system RAM.
One of the fields in the Page State Change NAE is the RMP page size. The
page size input parameter indicates that either a 4KB or 2MB page should
be used while adding the RMP entry. During the validation, when possible,
the MemEncryptSevSnpValidateSystemRam() will use the 2MB entry. A
hypervisor backing the memory may choose to use the different page size
in the RMP entry. In those cases, the PVALIDATE instruction should return
SIZEMISMATCH. If a SIZEMISMATCH is detected, then validate all 512-pages
constituting a 2MB region.
Upon completion, the PVALIDATE instruction sets the rFLAGS.CF to 0 if
instruction changed the RMP entry and to 1 if the instruction did not
change the RMP entry. The rFlags.CF will be 1 only when a memory region
is already validated. We should not double validate a memory
as it could lead to a security compromise. If double validation is
detected, terminate the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Commit 85b8eac59b added support to ensure
that MMIO is only performed against the un-encrypted memory. If MMIO
is performed against encrypted memory, a #GP is raised.
The AmdSevDxe uses the functions provided by the MemEncryptSevLib to
clear the memory encryption mask from the page table. If the
MemEncryptSevLib is extended to include VmgExitLib then depedency
chain will look like this:
OvmfPkg/AmdSevDxe/AmdSevDxe.inf
-----> MemEncryptSevLib class
-----> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
-----> VmgExitLib class
-----> "OvmfPkg/VmgExitLib" instance
-----> LocalApicLib class
-----> "UefiCpuPkg/BaseXApicX2ApicLib/BaseXApicX2ApicLib.inf" instance
-----> TimerLib class
-----> "OvmfPkg/AcpiTimerLib/DxeAcpiTimerLib.inf" instance
-----> PciLib class
-----> "OvmfPkg/DxePciLibI440FxQ35/DxePciLibI440FxQ35.inf" instance
-----> PciExpressLib class
-----> "MdePkg/BasePciExpressLib/BasePciExpressLib.inf" instance
The LocalApicLib provides a constructor that gets called before the
AmdSevDxe can clear the memory encryption mask from the MMIO regions.
When running under the Q35 machine type, the call chain looks like this:
AcpiTimerLibConstructor () [AcpiTimerLib]
PciRead32 () [DxePciLibI440FxQ35]
PciExpressRead32 () [PciExpressLib]
The PciExpressRead32 () reads the MMIO region. The MMIO regions are not
yet mapped un-encrypted, so the check introduced in the commit
85b8eac59b raises a #GP.
The AmdSevDxe driver does not require the access to the extended PCI
config space. Accessing a normal PCI config space, via IO port should be
sufficent. Use the module-scope override to make the AmdSevDxe use the
BasePciLib instead of BasePciExpressLib so that PciRead32 () uses the
IO ports instead of the extended config space.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The SEV-SNP guest requires that GHCB GPA must be registered before using.
See the GHCB specification section 2.3.2 for more details.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
SEV-SNP firmware allows a special guest page to be populated with
guest CPUID values so that they can be validated against supported
host features before being loaded into encrypted guest memory to be
used instead of hypervisor-provided values [1].
Add handling for this in the CPUID #VC handler and use it whenever
SEV-SNP is enabled. To do so, existing CPUID handling via VmgExit is
moved to a helper, GetCpuidHyp(), and a new helper that uses the CPUID
page to do the lookup, GetCpuidFw(), is used instead when SNP is
enabled. For cases where SNP CPUID lookups still rely on fetching
specific CPUID fields from hypervisor, GetCpuidHyp() is used there as
well.
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The SEV-SNP guest requires that GHCB GPA must be registered before using.
See the GHCB specification section 2.3.2 for more details.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Create a function that can be used to determine if VM is running as an
SEV-SNP guest.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
CPUID instructions are issued during early boot to do things like probe
for SEV support. Currently these are handled by a minimal #VC handler
that uses the MSR-based GHCB protocol to fetch the CPUID values from
the hypervisor. When SEV-SNP is enabled, use the firmware-validated
CPUID values from the CPUID page instead [1].
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
An SEV-SNP guest requires that private memory (aka pages mapped encrypted)
must be validated before being accessed.
The validation process consist of the following sequence:
1) Set the memory encryption attribute in the page table (aka C-bit).
Note: If the processor is in non-PAE mode, then all the memory accesses
are considered private.
2) Add the memory range as private in the RMP table. This can be performed
using the Page State Change VMGEXIT defined in the GHCB specification.
3) Use the PVALIDATE instruction to set the Validated Bit in the RMP table.
During the guest creation time, the VMM encrypts the OVMF_CODE.fd using
the SEV-SNP firmware provided LAUNCH_UPDATE_DATA command. In addition to
encrypting the content, the command also validates the memory region.
This allows us to execute the code without going through the validation
sequence.
During execution, the reset vector need to access some data pages
(such as page tables, SevESWorkarea, Sec stack). The data pages are
accessed as private memory. The data pages are not part of the
OVMF_CODE.fd, so they were not validated during the guest creation.
There are two approaches we can take to validate the data pages before
the access:
a) Enhance the OVMF reset vector code to validate the pages as described
above (go through step 2 - 3).
OR
b) Validate the pages during the guest creation time. The SEV firmware
provides a command which can be used by the VMM to validate the pages
without affecting the measurement of the launch.
Approach #b seems much simpler; it does not require any changes to the
OVMF reset vector code.
Update the OVMF metadata with the list of regions that must be
pre-validated by the VMM before the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Platform features and capabilities are traditionally discovered via the
CPUID instruction. Hypervisors typically trap and emulate the CPUID
instruction for a variety of reasons. There are some cases where incorrect
CPUID information can potentially lead to a security issue. The SEV-SNP
firmware provides a feature to filter the CPUID results through the PSP.
The filtered CPUID values are saved on a special page for the guest to
consume. Reserve a page in MEMFD that will contain the results of
filtered CPUID values.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
During the SNP guest launch sequence, a special secrets page needs to be
inserted by the VMM. The PSP will populate the page; it will contain the
VM Platform Communication Key (VMPCKs) used by the guest to send and
receive secure messages to the PSP.
The purpose of the secrets page in the SEV-SNP is different from the one
used in SEV guests. In SEV, the secrets page contains the guest owner's
private data after the remote attestation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The OvmfPkgX86 build reserves memory regions in MEMFD. The memory regions
get accessed in the SEC phase. AMD SEV-SNP require that the guest's
private memory be accepted or validated before access.
Introduce a Guided metadata structure that describes the reserved memory
regions. The VMM can locate the metadata structure by iterating through
the reset vector guid and process the areas based on the platform
specific requirements.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
In preparation for SEV-SNP support move clearing of the GHCB memory from
the ResetVector/AmdSev.asm to SecMain/AmdSev.c. The GHCB page is not
accessed until SevEsProtocolCheck() switch to full GHCB. So, the move
does not make any changes in the code flow or logic. The move will
simplify the SEV-SNP support.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Move all the SEV specific function in AmdSev.c.
No functional change intended.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the OvmfPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3731
Fix VS2019 NOOPT build issues with OvmfPkg/Microvm/MicrovmX64.dsc
by fixing typecast of MICROVM_GED_MMIO_BASE_REGS to a VOID *.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3724
Add typecast to fix build error with VS2019 X64 NOOPT converting
a UINT64 value to UINT32 value.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3722
Fix VS2019 NOOPT build issues related to converting
a larger integer value to a smaller integer value.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3688
Use DEBUG_LINE_NUMBER instead of __LINE__.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Michael Kubacki <michael.kubacki@microsoft.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
Note: Intel TDX is only available on X64, so the Tdx related changes are
in X64 path. In IA32 path, there may be null stub to make the build
success.
This patch includes below major changes.
1. Ia32/IntelTdx.asm
IntelTdx.asm includes below routines used in ResetVector
- IsTdx
Check if the running system is Tdx guest.
- InitTdxWorkarea
It initialize the TDX_WORK_AREA. Because it is called by both BSP and
APs and to avoid the race condition, only BSP can initialize the
WORK_AREA. AP will wait until the field of TDX_WORK_AREA_PGTBL_READY
is set.
- ReloadFlat32
After reset all CPUs in TDX are initialized to 32-bit protected mode.
But GDT register is not set. So this routine loads the GDT then jump
to Flat 32 protected mode again.
- InitTdx
This routine wrap above 3 routines together to do Tdx initialization
in ResetVector phase.
- IsTdxEnabled
It is a OneTimeCall to probe if TDX is enabled by checking the
CC_WORK_AREA.
- CheckTdxFeaturesBeforeBuildPagetables
This routine is called to check if it is Non-TDX guest, TDX-Bsp or
TDX-APs. Because in TDX guest all the initialization is done by BSP
(including the page tables). APs should not build the tables.
- TdxPostBuildPageTables
It is called after Page Tables are built by BSP.
byte[TDX_WORK_AREA_PGTBL_READY] is set by BSP to indicate APs can
leave spin and go.
2. Ia32/PageTables64.asm
As described above only the TDX BSP build the page tables. So
PageTables64.asm is updated to make sure only TDX BSP build the
PageTables. TDX APs will skip the page table building and set Cr3
directly.
3. Ia16/ResetVectorVtf0.asm
In Tdx all CPUs "reset" to run on 32-bit protected mode with flat
descriptor (paging disabled). But in Non-Td guest the initial state of
CPUs is 16-bit real mode. To resolve this conflict, BITS 16/32 is used
in the ResetVectorVtf0.asm. It checks the 32-bit protected mode or 16-bit
real mode, then jump to the corresponding entry point.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX when host VMM creates a new guest TD, some initial set of
TD-private pages are added using the TDH.MEM.PAGE.ADD function. These
pages typically contain Virtual BIOS code and data along with some clear
pages for stacks and heap. In the meanwhile, some configuration data
need be measured by host VMM. Tdx Metadata is designed for this purpose
to indicate host VMM how to do the above tasks.
More detailed information of Metadata is in [TDVF] Section 11.
Tdx Metadata describes the information about the image for VMM use.
For example, the base address and length of the TdHob, Bfv, Cfv, etc.
The offset of the Metadata is stored in a GUID-ed structure which is
appended in the GUID-ed chain from a fixed GPA (0xffffffd0).
In this commit there are 2 new definitions of BFV & CFV.
Tdx Virtual Firmware (TDVF) includes one Firmware Volume (FV) known
as the Boot Firmware Volume (BFV). The FV format is defined in the
UEFI Platform Initialization (PI) spec. BFV includes all TDVF
components required during boot.
TDVF also include a configuration firmware volume (CFV) that is
separated from the BFV. The reason is because the CFV is measured in
RTMR, while the BFV is measured in MRTD.
In practice BFV is the code part of Ovmf image (OVMF_CODE.fd). CFV is
the vars part of Ovmf image (OVMF_VARS.fd).
Since AMD SEV has already defined some SEV specific memory region in
MEMFD. TDX re-uses some of the memory regions defined by SEV.
- MailBox : PcdOvmfSecGhcbBackupBase|PcdOvmfSecGhcbBackupSize
- TdHob : PcdOvmfSecGhcbBase|PcdOvmfSecGhcbSize
[TDVF] https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-virtual-firmware-design-guide-rev-1.pdf
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously WORK_AREA_GUEST_TYPE was cleared in SetCr3ForPageTables64.
This is workable for Legacy guest and SEV guest. But it doesn't work
after Intel TDX is introduced. It is because all TDX CPUs (BSP and APs)
start to run from 0xfffffff0, thus WORK_AREA_GUEST_TYPE will be cleared
multi-times if it is TDX guest. So the clearance of WORK_AREA_GUEST_TYPE
is moved to Main16 entry point in Main.asm.
Note: WORK_AREA_GUEST_TYPE is only defined for ARCH_X64.
For Intel TDX, its corresponding entry point is Main32 (which will be
introduced in next commit in this patch-set). WORK_AREA_GUEST_TYPE will
be cleared there.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously OvmfPkg/ResetVector uses the Main.asm in
UefiCpuPkg/ReseteVector/Vtf0. In this Main.asm there is only Main16
entry point.
This patch-set is to introduce Intel TDX into Ovmf. Main32 entry point
is needed in Main.asm by Intel TDX. To reduce the complexity of Main.asm
in UefiCpuPkg, OvmfPkg create its own Main.asm to meet the requirement
of Intel TDX. This Main.asm is an unmodified copy (so no functional
change) and the actual changes for tdx come as incremental patches.
UefiCpuPkg/ResetVector/Vtf0/main.asm -> OvmfPkg/ResetVector/Main.asm
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The commit 80e67af9af added support for the generic work area concept
used mainly by the encrypted VMs but missed update the AmdSev package.
Fixes: 80e67af9af ("OvmfPkg: introduce a common work area")
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Tested-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The commit 80e67af9af added support for the generic work area concept
used mainly by the encrypted VMs. In the past, the work area was
preliminary used by the SEV-ES VMs. The SEV-ES support is available for
the X64 builds only. But now, that work area header contains fields that
nonencrypted VMs and SEV VMs can use. They can be built for IA32. So,
moving the work area defines outside of X64.
Fixes: 80e67af9af ("OvmfPkg: introduce a common work area")
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate VirtioFdtDxe to OvmfPkg/Fdt, this driver is leverage by
both ARM and RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate FdtPciHostBridgeLib to OvmfPkg/Fdt, this library is
leverage by both ARM and RISC-V archs. Also use
PcdPciMmio32Translation and PcdPciMmio64Translation
PCDs provided by MdePkg instead of ArmPkg.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Relocate QemuFwCfgLib to OvmfPkg/Library/QemuFwCfgLib and rename
it to QemuFwCfgLibMmio, this library is leverage by both ARM and
RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Add RISC-V VM in the file header.
Add RISC-V to the supported arch.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Min Xu
Michael Kubacki
Sebastien Boeuf
Brijesh Singh
Gerd Hoffmann
Rebecca Cran
Abner Chang
Dov Murik
Rebecca Cran
Stefan Berger
Ard Biesheuvel
lixianglai
Jason Andryuk
Philippe Mathieu-Daude
Brijesh Singh via groups.io
Michael Roth
Michael D Kinney