When re-entering EDK2 from a high level OS such as Linux, the GICv3 may
be configured to use split priority drop and deactivate (EOImode == 1),
whereas EDK2's GICv3 driver assumes the default setting of EOImode == 0.
So clear the EOImode bit explicitly when taking control of the GIC.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move the remaining code in ArmGicLib into ArmGicDxe, its only user, and
drop the dependency on ArmGicLib. Note that ArmGicDxe has an undeclared
dependency on ArmLib, so declare that instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Before getting rid of ArmGicArchLib entirely, preserve some GIC
architecture related preprocessor defines by moving them into
ArmGicLib.h instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ArmGicArchLib implements a check on the accessibility of the GIC system
register interface, which is a prerequisite for using the GIC in v3
mode. It might be possible to use GICv2 compatibility mode on poorly
configured platforms where the GIC is v3 capable but not accessible, but
in most cases, the GIC is driven in its native mode.
This check is now only carried out in a single place, and there is not
really any reason to keep this in a separate library. Even though
ArmVirtPkg implements its own version, the basic check (and enablement
of the sysreg interface) is still needed.
So move this check into the DXE driver itself, and drop the dependency
on ArmGicArchLib. This allows it to be retired in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ArmGicDxe is the only remaining user of ArmGicLib, and so there is no
need for the abstraction, which is drawn at an arbitrary boundary
anyway. So remove the remaining V2 specific code into the DXE driver.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move the remaining ArmGicLib code that is shared between the v2 and v3
GIC DXE drivers into ArmGicCommonDxe.c
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Split ArmGicEnableDistributor () into GICv2 and v3 specific versions,
and move them into their single respective callers, so that the original
can be dropped from ArmGicLib altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ArmGicLib is agnostic about the difference between v2 and v3, but its
APIs are only called from code that is either v2-specific or
v3-specific. That makes the generic interface kind of pointless, and we
can just merge this code into the callers.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ArmGicEndOfInterrupt () is never used: the v2 and v3 versions of the
driver call respective specific versions directly, and so this API can
be removed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ArmGicSendSgiTo () is never used, and is fundamentally tied to multi-CPU
operation which is no longer supported. So drop the implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The ArmGicLib API exposes ArmGicEnableInterruptInterface () and
ArmGicDisableInterruptInterface (), but only the former is actually
used, and only from the GICv2 driver. So drop the API entirely, and
invoke the v2 version of the underlying interface directly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A compiler warning was detected that 'IntId' could be used uninitialized
in the `else` branch.
Since there are no consumers of this function, it was decided to remove
this function completely.
Signed-off-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Makes changes to comply with alerts raised by CodeQL.
The issues here fall into the following category:
1. unsigned-comparison-zero
Signed-off-by: Raymond Diaz <raymonddiaz@microsoft.com>
The CPU Interface Identification Register (GICC_IIDR) is a 32-bit
register. Since ArmGicGetInterfaceIdentification () returns the value
read from the GICC_IIDR register, update the return type for this
function to UINT32.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The Software Generated Interrupt Register (GICD_SGIR) is a 32 bit
register with the following bit assignment:
TargetListFilter, bits [25:24]
CPUTargetList, bits [23:16]
NSATT, bit [15]
SGIINTID, bits [3:0]
Therefore, modify the TargetListFilter, CPUTargetList, SGI Interrupt ID
parameters of the ArmGicSendSgiTo () to use UINT8 instead of INTN.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
The data type used by variables representing the
GicInterruptInterfaceBase has been inconsistently used in the ArmGic
driver and the library. The PCD defined for the GIC Interrupt interface
base address is UINT64. However, the data types for the variables used
is UINTN, INTN, and at some places UINT32.
Therefore, update the data types to use UINTN and add necessary
typecasts when reading values from the PCD. This should then be
consistent across AArch32 and AArch64 builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The data type used by variables representing the GicDistributorBase has
been inconsistently used in the ArmGic driver and the library. The PCD
defined for the GIC Distributor base address is UINT64. However, the
data types for the variables used is UINTN, INTN, and at some places
UINT32.
Therefore, update the data types to use UINTN and add necessary
typecasts when reading values from the PCD. This should then be
consistent across AArch32 and AArch64 builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the ArmPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Edk2 coding standard states that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used."
Ref:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
5_source_files/53_include_files#
5-3-5-all-include-file-contents-must-be-protected-by-a-include-guard
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to ARM IHI 0069F, section 11.9.18 GICD_IPRIORITYR<n>,
Interrupt Priority Registers, n = 0 - 254, when affinity routing is
enabled for the Security state of an interrupt, GICR_IPRIORITYR<n>
is used instead of GICD_IPRIORITYR<n> where n = 0 to 7 (that is, for
SGIs and PPIs).
As setting interrupt priority for SGIs and PPIs are handled using
difference registers depends on the mode, this patch instroduces
ArmGicSetInterruptPriority() helper function to handle the discrepancy.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The existing HardwareInterrupt protocol lacked a means to configure the
level/edge properties of an interrupt. The new HardwareInterrupt2
protocol introduced this capability.
This patch updates the GIC drivers to provide the new interfaces.
The changes comprise:
Update to use HardwareInterrupt2 protocol
Additions to register info in ArmGicLib.h
Added new functionality (GetTriggerType and SetTriggerType)
The requirement for this change derives from a problem detected on ARM
Juno boards, but the change is of generic (ARM) relevance.
This commit is in response to review on the mailing list and, as
suggested there, rolls Girish's updates onto Ard's original example.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Girish Pathak <girish.pathak@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reassign all interrupts to non-secure Group-1 if the GIC has its DS
(Disable Security) bit set. In this case, it is safe to assume that we
own the GIC, and that no other firmware has performed any configuration
yet, which means it is up to us to reconfigure the interrupts so they
can be taken by the non-secure firmware.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The current implementation of ArmGicGetSupportedArchRevision ()
that is used by all ARM platforms is entirely stateless (in order
to support being executed from flash) so it needs to interrogate
the hardware for the supported GIC revision upon each invocation.
However, this statelessness is only needed for SEC type modules;
in all other cases, we could easily determine the GIC revision once,
and store the result in a global variable.
In preparation of having separate early and normal versions, this patch
introduces the ArmGicArchLib library class and default implementation,
and moves the existing ArmGicGetSupportedArchRevision () into it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18098 6f19259b-4bc3-4df7-8a09-765794883524
Before splitting off ArmGicArchLib and moving it out of
ArmPkg/Drivers/ArmGic into ArmPkg/Library, make sure that the
GIC specific declarations it depends on are not hidden away in
local headers "GicV2/GicV2Lib.h" and "GicV3/GicV3Lib.h".
So merge them with <Library/ArmGicLib.h>. This is entirely
appropriate, since this is not a header that declares a public
interface into ArmGicLib, but defines implementation internals.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18097 6f19259b-4bc3-4df7-8a09-765794883524
The GICv3 driver must use native mode to drive a GICv3 due to
the fact that v2 compatibility is optional in the v3 spec.
However, if v2 compatibility is implemented, it is the default
and needs to be disabled first by setting the Affinity Routing
Enable (ARE) bit.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
[added PCD that allows forcing the GICv3 driver to drive the GIC in v2 mode]
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16875 6f19259b-4bc3-4df7-8a09-765794883524
GICv3 controller with no GICv2 legacy support must use the GIC
Redistributor registers instead of the GIC Distributor registers
for some operations (eg: enable/disable interrupts).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16874 6f19259b-4bc3-4df7-8a09-765794883524
ARM GICv3 specification introduces some new components and registers.
This patch adds their definitions.
The most important GICv3 component is the GIC Redistributor. It supports
LPIs (Locality-specific peripheral Interrupt), 8+ CPU configuration.
Some GIC distributor registers have moved to the GIC redistributor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Tested-by: Ard Biesheuvel <ard@linaro.org>
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16872 6f19259b-4bc3-4df7-8a09-765794883524
This function returns the revision of the GIC Architecture.
Some GICv3 controllers can work in GICv2 mode. Switching to an
older GIC revision is driven by the higher level exception level.
This function allows code to support any GIC revision at runtime.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16231 6f19259b-4bc3-4df7-8a09-765794883524
The InterruptId has a different width for GicV2 and GicV3 (respectively
10bit and 24bit).
The function prototype has been changed to return this value to make the
caller GIC architecture version independent. Otherwise, we would have need
to expose a different mask to allow the caller to retrieve this value from
the read register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15628 6f19259b-4bc3-4df7-8a09-765794883524
The support for GIcV2 was already existing. This change separate the GicV2
specific functions from the common Gic code (in preparation for GicV3 support).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15626 6f19259b-4bc3-4df7-8a09-765794883524
The aim is to make this driver follows the ARM GIC specifications and
be implementation independent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14810 6f19259b-4bc3-4df7-8a09-765794883524
These macros are helper functions to get the information from the GIC CPU
Interface Identification register.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14582 6f19259b-4bc3-4df7-8a09-765794883524
The function 'ArmGicAcknowledgeSgiFrom' was actually acknowledging Interrupts (and not only SGIs).
ArmPkg/ArmGicLib: Introduced the PCD PcdGicPrimaryCoreId
This PCD defines the Id of the primary core in the GIC.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13259 6f19259b-4bc3-4df7-8a09-765794883524
The GICD_IGROUPR0 is banked for each connected processor. It means the
Non-Secure bits for the PPIs (Private Peripheral Interrupts) must be
configured for every processor.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13135 6f19259b-4bc3-4df7-8a09-765794883524
This library is the interface for the ARM Generic Interrupt Controller
Architecture Specification.
ARM Platform can use any GIC controller (not necessary PL390 GIC).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12411 6f19259b-4bc3-4df7-8a09-765794883524
