BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3974
SecPeiCcProbeLib is designed to probe the Confidential Computing guest
type in SEC/PEI phase. The CC guest type was set by each CC guest at
the beginning of boot up and saved in PcdOvmfWorkArea.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Increase the maximum line length for debug messages.
While log messages should be short, they can still
get quite long, for example when printing device paths
or config strings in HII routing.
512 chars is an empirically good value.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Fix path to follow naming convention of "AArch64", and allow the path
in "Maintainers.txt" to work as expected.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3982
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Consume the host-provided specification of PCI host bridges if
available. Using the DxeHardwareInfoLib, populate a list of
hardware descriptors based on the content of the "hardware-info"
fw-cfg file, if provided. In the affirmative case, use the
resources and attributes specified by the hypervisor for each
Host Bridge to create the RootBridge elements.
In Ovmf platforms, the host can provide the specification of
non-discoverable hardware resources like PCI host bridges. If the
proper fw-cfg file is found, parse the contents provided by the
host into a linked list by using the Hardware Info library. Then,
using the list of PCI host bridges' descriptions, populate the
PCI_ROOT_BRIDGES array with the resources and attributes specified
by the host. If the file is not provided or no Host Bridge is found
in it, fold back to the legacy method based on pre-defined
apertures and rules.
In some use cases, the host requires additional control over the
hardware resources' configurations in the guest for performance and
discoverability reasons. For instance, to disclose information about
the PCI hierarchy to the guest so that this can profit from
optimized accesses. In this case, the host can decide to describe
multiple PCI Host Bridges and provide a specific set of resources
(e.g. MMIO apertures) so that the guest uses the values provided.
Using the provided values may entitle the guest to added performance,
for example by using specific MMIO mappings that can enable peer-to-peer
communication across the PCI hierarchy or by allocating memory closer
to a device for faster DMA transactions.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Read the "hardware-info" item from fw-cfg to extract specifications
of PCI host bridges and analyze the 64-bit apertures of them to
find out the highest 64-bit MMIO address required which determines
the address space required by the guest, and, consequently, the
FirstNonAddress used to calculate size of physical addresses.
Using the static PeiHardwareInfoLib, read the fw-cfg file of
hardware information to extract, one by one, all the host
bridges. Find the last 64-bit MMIO address of each host bridge,
using the HardwareInfoPciHostBridgeLib API, and compare it to an
accumulate value to discover the highest address used, which
corresponds to the highest value that must be included in the
guest's physical address space.
Given that platforms with multiple host bridges may provide the PCI
apertures' addresses, the memory detection logic must take into
account that, if the host provided the MMIO windows that can and must
be used, the guest needs to take those values. Therefore, if the
MMIO windows are found in the host-provided fw-cfg file, skip all the
logic calculating the physical address size and just use the value
provided. Since each PCI host bridge corresponds to an element in
the information provided by the host, each of these must be analyzed
looking for the highest address used.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Following the Hardware Info library, create the DxeHardwareInfoLib
which implements the whole API capable of parsing heterogeneous hardware
information. The list-like API grants callers a flexible and common
pattern to retrieve the data. Moreover, the initial source is a BLOB
which generalizes the host-to-guest transmission mechanism.
The Hardware Info library main objective is to provide a way to
describe non-discoverable hardware so that the host can share the
available resources with the guest in Ovmf platforms. This change
features and embraces the main idea behind the library by providing
an API that parses a BLOB into a linked list to retrieve hardware
data from any source. Additionally, list-like APIs are provided so
that the hardware info list can be traversed conveniently.
Similarly, the capability is provided to filter results by specific
hardware types. However, heterogeneous elements can be added to the
list, increasing the flexibility. This way, a single source, for
example a fw-cfg file, can be used to describe several instances of
multiple types of hardware.
This part of the Hardware Info library makes use of dynamic memory
and is intended for stages in which memory services are available.
A motivation example is the PciHostBridgeLib. This library, part
of the PCI driver populates the list of PCI root bridges during DXE
stage for future steps to discover the resources under them. The
hardware info library can be used to obtain the detailed description
of available host bridges, for instance in the form of a fw-cfg file,
and parse that information into a dynmaic list that allows, first to
verify consistency of the data, and second discover the resources
availabe for each root bridge.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Define the HardwareInfoLib API and create the PeiHardwareInfoLib
which implements it, specifically for Pei usage, supporting
only static accesses to parse data directly from a fw-cfg file.
All list-like APIs are implemented as unsupported and only a
fw-cfg wrapper to read hardware info elements is provided.
The Hardware Info library is intended to describe non-discoverable
hardware information and share that from the host to the guest in Ovmf
platforms. The QEMU fw-cfg extension for this library provides a first
variation to parse hardware info by reading it directly from a fw-cfg
file. This library offers a wrapper function to the plain
QmeuFwCfgReadBytes which, specifically, parses header-data pairs out
of the binary values in the file. For this purpose, the approach is
incremental, reading the file block by block and outputting the values
only for a specific known hardware type (e.g. PCI host bridges). One
element is returned in each call until the end of the file is reached.
Considering fw-cfg as the first means to transport hardware info from
the host to the guest, this wrapping library offers the possibility
to statically, and in steps, read a specific type of hardware info
elements out of the file. This method reads one hardware element of a
specific type at a time, without the need to pre-allocate memory and
read the whole file or dynamically allocate memory for each new
element found.
As a usage example, the static approach followed by this library
enables early UEFI stages to use and read hardware information
supplied by the host. For instance, in early times of the PEI stage,
hardware information can be parsed out from a fw-cfg file prescinding
from memory services, that may not yet be available, and avoiding
dynamic memory allocations.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Create the Hardware Info library base together with the specifics to
describe PCI Host Bridges.
The Hardware Info library is intended to be used for disclosing
non-discoverable hardware information from the host to the guest in
Ovmf platforms. Core functionality will provide the possibility to
parse information from a generic BLOB into runtime structures. The
library is conceived in a generic way so that further hardware
elements can also be described using it. For such purpose the length
of the BLOB is not restricted but instead regarded as a sequence of
header-info elements that allow the parsing during runtime. The first
type of hardware defined will be PCI host bridges, providing the
possibility to define multiple and specify the resources each of them
can use. This enables the guest firmware to configure PCI resources
properly. Having the size of each individual element favors the reuse
of a single interface to convey descriptions of an arbitrary number
of heterogenous hardware elements. Furthermore, flexible access
mechanisms coupled with the size will grant the possibility of
interpreting them in a single run.
Define the base types of the generic Hardware Info library to parse
heterogeneous data. Also provide the specific changes to support
PCI host bridges as the first hardware type supported by the
library.
Additionally, define the HOST_BRIDGE_INFO structure to describe PCI
host bridges along with the functionality to parse such information
into proper structures used by the PCI driver in a centralized manner
and taking care of versioning.
As an example and motivation, the library will be used to define
multiple PCI host bridges for complex platforms that require it.
The first means of transportation that will be used is going to be
fw-cfg, over which a stream of bytes will be transferred and later
parsed by the hardware info library. Accordingly, the PCI driver
will make use of these host bridges definitions to populate the
list of Root Bridges and proceed with the configuration and discovery
of underlying hardware components.
As mentioned before, the binary data to be parsed by the Hardware
Info library should be organized as a sequence of Header-element
pairs in which the header describes the type and size of the associated
element that comes right after it. As an illustration, to provide
inforation of 3 host bridges the data, conceptually, would look
like this:
Header PCI Host Bridge (type and size) # 1
PCI Host Bridge info # 1
Header PCI Host Bridge (type and size) # 2
PCI Host Bridge info # 2
Header PCI Host Bridge (type and size) # 3
PCI Host Bridge info # 3
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
The feature of SecMeasurementLibTdx is replaced by SecTpmMeasurementLibTdx
(which is in SecurityPkg). So SecMeasurementLibTdx is deleted.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
MeasureHobList and MeasureFvImage once were implemented in
SecMeasurementTdxLib. The intention of this patch-set is to refactor
SecMeasurementTdxLib to be an instance of TpmMeasurementLib. So these
2 functions (MeasureHobList/MeasureFvImage) are moved to
PeilessStartupLib. This is because:
1. RTMR based trusted boot is implemented in Config-B (See below link)
2. PeilessStartupLib is designed for PEI-less boot and it is the right
place to do the measurement for Hoblist and Config-FV.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
TdHobList and Configuration FV are external data provided by Host VMM.
These are not trusted in Td guest. So they should be validated , measured
and extended to Td RTMR registers. In the meantime 2 EFI_CC_EVENT_HOB are
created. These 2 GUIDed HOBs carry the hash value of TdHobList and
Configuration FV. In DXE phase EFI_CC_EVENT can be created based on these
2 GUIDed HOBs.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3853
SecMeasurementLib is designed to do the measurement in SEC phase. In
current stage there are 2 functions introduced:
- MeasureHobList: Measure the Hoblist passed from the VMM.
- MeasureFvImage: Measure the FV image.
SecMeasurementLibTdx is the TDX version of the library.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ken Lu <ken.lu@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Since Cloud Hypervisor doesn't emulate an A20 gate register on I/O port
0x92, it's better to avoid accessing it when the platform is identified
as Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
There are few places in the codebase assuming QemuFwCfg will be present
and supported, which can cause some issues when trying to rely on the
QemuFwCfgLibNull implementation of QemuFwCfgLib.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
microvm places the 64bit mmio space at the end of the physical address
space. So mPhysMemAddressWidth must be correct, otherwise the pci host
bridge setup throws an error because it thinks the 64bit mmio window is
not addressable.
On microvm we can simply use standard cpuid to figure the address width
because the host-phys-bits option (-cpu ${name},host-phys-bits=on) is
forced to be enabled. Side note: For 'pc' and 'q35' this is not the
case for backward compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In current TDVF implementation all unaccepted memory passed in Hoblist
are tagged as EFI_RESOURCE_MEMORY_UNACCEPTED. They're all accepted before
they can be accessed. After accepting memory region, the Hob ResourceType
is unchanged (still be EFI_RESOURCE_MEMORY_UNACCEPTED).
TDVF Config-B skip PEI phase and it tries to find a memory region which
is the largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
So we should walk thru the input hoblist and search for the memory region
with the type of EFI_RESOURCE_MEMORY_UNACCEPTED.
Because EFI_RESOURCE_MEMORY_UNACCEPTED has not been officially in PI spec.
So it cannot be defined in MdePkg/Include/Pi/PiHob.h. As a temporary
solution it is defined in Hob.c.
There is a patch-set for lazy-accept very soon. In that patch-set
EFI_RESOURCE_MEMORY_UNACCEPTED will be defined in MdeModulePkg.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3918
There are 4 MpInitLibDepLib:
- PeiMpInitLibMpDepLib:
MpInitLib multi-processor dependency
- PeiMpInitLibUpDepLib:
MpInitLib unique-processor dependency
- DxeMpInitLibMpDepLib:
MpInitLib multi-processor dependency
- DxeMpInitLibUpDepLib
MpInitLib unique-processor dependency
The Pei libs depend on the corresponding PPI. The Dxe libs depend on the
corresponding Protocol.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
This is the OvmfPkg specific CcProbeLib. It checks the Ovmf WorkArea
(PcdOvmfWorkAreaBase) to return the guest type.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
Replace GUEST_TYPE with CC_GUEST_TYPE which is defined in
MdePkg/Include/ConfidentialComputingGuestAttr.h.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The entrypoint of DxeAcpiTimerLib checks HostBridgeDevId by reading
PcdOvmfHostBridgePciDevId. If the DevId is not set, ASSERT is
triggered. Normally this DevId is set in PlatformPei which is executed
in PEI phase.
This patch-set is introducing PEI-less boot which means PEI phase is
skipped. So there is no chance to set this DevId. Instead HostBridgeDevId
is set in PlatformInfoHob. So we can check if PlatformInfoHob exists and
if HostBridgeDevId is set in this Hob.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
PeilessStarupLib provides a function (PeilessStartup) which brings
up both Legacy and Tdx guest from SEC phase to DXE phase. PEI phase
is skipped so that the attack surfaces are reduced as much as possible.
PeilessStartup() does below tasks:
1. Contruct the FW hoblist.
Since PEI is skipped, we must find a memory region which is the
largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
2. Initialize the platform.
3. Build various Hobs, such as SecFv Hob, DxeFv Hob, Stack Hob, etc.
4. At last DXE Core is located / loaded and transfer control to it.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In the previous QemuFwCfgDxe only SEV is supported. This commit
introduce TDX support in QemuFwCfgDxe.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Add Intel Tdx helper library. The library provides the routines to:
- set or clear Shared bit for a given memory region.
- query whether TDX is enabled.
Please be noted, there a lot of duplicated codes for Page Table
operations. These codes should be moved to a common library
(PageTablesLib) so that it is more friendly for review and maintain.
There is a new feature requirement
https://bugzilla.tianocore.org/show_bug.cgi?id=847 which is to
implement the library. After the lib is introduced, BaseMemEncryptTdxLib
will be refactored.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
There are below changes in PlatformInitLib for Tdx guest:
1. Publish ram regions
In Tdx guest, the system memory is passed in TdHob by host VMM. So
the major task of PlatformTdxPublishRamRegions is to walk thru the
TdHob list and transfer the ResourceDescriptorHob and MemoryAllocationHob
to the hobs in DXE phase.
2. Build MemoryAllocationHob for Tdx Mailbox and Ovmf work area.
3. Update of PlatformAddressWidthInitialization. The physical
address width that Tdx guest supports is either 48 or 52.
4. Update of PlatformMemMapInitialization.
0xA0000 - 0xFFFFF is VGA bios region. Platform initialization marks the
region as MMIO region. Dxe code maps MMIO region as IO region.
As TDX guest, MMIO region is maps as shared. However VGA BIOS doesn't need
to be shared. Guest TDX Linux maps VGA BIOS as private and accesses for
BIOS and stuck on repeating EPT violation. VGA BIOS (more generally ROM
region) should be private. Skip marking VGA BIOA region [0xa000, 0xfffff]
as MMIO in HOB.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
If TDX is enabled then we do not support DMA operation in PEI phase.
This is mainly because DMA in TDX guest requires using bounce buffer
(which need to allocate dynamic memory and allocating a PAGE size'd
buffer can be challenge in PEI phase).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the newly added function (ProcessTdxHobList) is to process
the TdHobList to accept the memory. Because TdHobList is provided by
host VMM which is not trusted, so its content should be checked before
it is consumed by TDVF.
Because ProcessTdxHobList is to be called in SEC phase, so
PlatformInitLib.inf is updated to support SEC.
Note: In this patch it is BSP which accepts the pages. So there maybe
boot performance issue. There are some mitigations to this issue, such
as lazy accept, 2M accept page size, etc. We will re-visit here in the
future.
EFI_RESOURCE_MEMORY_UNACCEPTED is a new ResourceType in
EFI_HOB_RESOURCE_DESCRIPTOR. It is defined for the unaccepted memory
passed from Host VMM. This is proposed in microsoft/mu_basecore#66
files#diff-b20a11152d1ce9249c691be5690b4baf52069efadf2e2546cdd2eb663d80c9
e4R237 according to UEFI-Code-First. The proposal was approved in 2021
in UEFI Mantis, and will be added to the new PI.next specification.
Per the MdePkg reviewer's comments, before this new ResourceType is
added in the PI spec, it should not be in MdePkg. So it is now
defined as an internal implementation and will be moved to
MdePkg/Include/Pi/PiHob.h after it is added in PI spec.
See https://edk2.groups.io/g/devel/message/87641
PcdTdxAcceptPageSize is added for page accepting. Currently TDX supports
4K and 2M accept page size. The default value is 2M.
Tdx guest is only supported in X64. So for IA32 ProcessTdxHobList
just returns EFI_UNSUPPORTED.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
There are 3 variants of PlatformPei in OvmfPkg:
- OvmfPkg/PlatformPei
- OvmfPkg/XenPlatformPei
- OvmfPkg/Bhyve/PlatformPei/PlatformPei.inf
These PlatformPeis can share many common codes, such as
Cmos / Hob / Memory / Platform related functions. This commit
(and its following several patches) are to create a PlatformInitLib
which wraps the common code called in above PlatformPeis.
In this initial version of PlatformInitLib, below Cmos related functions
are introduced:
- PlatformCmosRead8
- PlatformCmosWrite8
- PlatformDebugDumpCmos
They correspond to the functions in OvmfPkg/PlatformPei:
- CmosRead8
- CmosWrite8
- DebugDumpCmos
Considering this PlatformInitLib will be used in SEC phase, global
variables and dynamic PCDs are avoided. We use PlatformInfoHob
to exchange information between functions.
EFI_HOB_PLATFORM_INFO is the data struct which contains the platform
information, such as HostBridgeDevId, BootMode, S3Supported,
SmmSmramRequire, etc.
After PlatformInitLib is created, OvmfPkg/PlatformPei is refactored
with this library.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In Tdx BSP may issues commands to APs for some task, for example, to
accept pages paralelly. BSP also need to wait until all the APs have
done the task. TdxMailboxLib wraps these common funtions for BSP.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The base VmgExitLib library provides a default limited interface to
handle #VE exception. To provide full support, the OVMF version of
VmgExitLib is extended to provide full support of #VE handler.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3582
Improve the MemEncryptSev{Es,Snp}IsEnabled() to use the SEV_STATUS MSR
value saved in the workarea. Since workarea is valid until the PEI phase,
so, for the Dxe phase use the PcdConfidentialComputingGuestAttr to
determine which SEV technology is enabled.
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
XCODE5 reported the following warning:
OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c:1895:12: note:
uninitialized use occurs here
Compacted
^^^^^^^^^
Initialize the 'Compacted' variable to fix the warning.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Move BaseCachingPciExpressLib library from ArmVirtPkg to under OvmfPkg.
RISC-V Virt platform can leverage the same library to access PCI Express
registers through PCI Express base address set in PcdPciExpressBaseAddress
and cached in a global variable.
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cloud Hypervisor doesn't emulate any LPC bridge, therefore we simply
need to rely on the serial I/O port to be connected as a console.
It reuses the code from Xen since it's very generic.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For GPU passthrough support we have to initialize the console after
EfiBootManagerDispatchDeferredImages() has loaded ROMs, so call it after
this. This was the calling order before the TCG physical presence support
had to be moved and the console initialized earlier so user interaction
could be supported before processing TCG physical presence opcodes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Shivanshu Goyal <shivanshu3@gmail.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The SetMemoryEncDec() is used by the higher level routines to set or clear
the page encryption mask for system RAM and Mmio address. When SEV-SNP is
active, in addition to set/clear page mask it also updates the RMP table.
The RMP table updates are required for the system RAM address and not
the Mmio address.
Add a new parameter in SetMemoryEncDec() to tell whether the specified
address is Mmio. If its Mmio then skip the page state change in the RMP
table.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSev{Set,Clear}PageEncMask() functions are used to set or
clear the memory encryption attribute in the page table. When SEV-SNP
is active, we also need to change the page state in the RMP table so that
it is in sync with the memory encryption attribute change.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The VMM launch sequence should have pre-validated all the data pages used
in the Reset vector. The range does not cover the data pages used during
the SEC phase (mainly PEI and DXE firmware volume decompression memory).
When SEV-SNP is active, the memory must be pre-validated before the access.
Add support to pre-validate the memory range from SnpSecPreValidatedStart
to SnpSecPreValidatedEnd. This should be sufficent to enter into the PEI
phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The initial page built during the SEC phase is used by the
MemEncryptSevSnpValidateSystemRam() for the system RAM validation. The
page validation process requires using the PVALIDATE instruction; the
instruction accepts a virtual address of the memory region that needs
to be validated. If hardware encounters a page table walk failure (due
to page-not-present) then it raises #GP.
The initial page table built in SEC phase address up to 4GB. Add an
internal function to extend the page table to cover > 4GB. The function
builds 1GB entries in the page table for access > 4GB. This will provide
the support to call PVALIDATE instruction for the virtual address >
4GB in PEI phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSevSnpPreValidateSystemRam() is used for pre-validating the
system RAM. As the boot progress, each phase validates a fixed region of
the RAM. In the PEI phase, the PlatformPei detects all the available RAM
and calls to pre-validate the detected system RAM.
While validating the system RAM in PEI phase, we must skip previously
validated system RAM to avoid the double validation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide the hardware isolated
abstraction layers with a VM. The VMPL0 is the highest privilege, and
VMPL3 is the least privilege. Certain operations must be done by the
VMPL0 software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SEV-SNP support assumes that the guest is running on VMPL0.
Let's add function in the MemEncryptSevLib that can be used for checking
whether guest is booted under the VMPL0.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The guest can request the
hypervisor to add pages in the RMP table via the Page State Change VMGEXIT
defined in the GHCB specification section 2.5.1 and 4.1.6. Inside each RMP
entry is a Validated flag; this flag is automatically cleared to 0 by the
CPU hardware when a new RMP entry is created for a guest. Each VM page
can be either validated or invalidated, as indicated by the Validated
flag in the RMP entry. Memory access to a private page that is not
validated generates a #VC. A VM can use the PVALIDATE instruction to
validate the private page before using it.
During the guest creation, the boot ROM memory is pre-validated by the
AMD-SEV firmware. The MemEncryptSevSnpValidateSystemRam() can be called
during the SEC and PEI phase to validate the detected system RAM.
One of the fields in the Page State Change NAE is the RMP page size. The
page size input parameter indicates that either a 4KB or 2MB page should
be used while adding the RMP entry. During the validation, when possible,
the MemEncryptSevSnpValidateSystemRam() will use the 2MB entry. A
hypervisor backing the memory may choose to use the different page size
in the RMP entry. In those cases, the PVALIDATE instruction should return
SIZEMISMATCH. If a SIZEMISMATCH is detected, then validate all 512-pages
constituting a 2MB region.
Upon completion, the PVALIDATE instruction sets the rFLAGS.CF to 0 if
instruction changed the RMP entry and to 1 if the instruction did not
change the RMP entry. The rFlags.CF will be 1 only when a memory region
is already validated. We should not double validate a memory
as it could lead to a security compromise. If double validation is
detected, terminate the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
SEV-SNP firmware allows a special guest page to be populated with
guest CPUID values so that they can be validated against supported
host features before being loaded into encrypted guest memory to be
used instead of hypervisor-provided values [1].
Add handling for this in the CPUID #VC handler and use it whenever
SEV-SNP is enabled. To do so, existing CPUID handling via VmgExit is
moved to a helper, GetCpuidHyp(), and a new helper that uses the CPUID
page to do the lookup, GetCpuidFw(), is used instead when SNP is
enabled. For cases where SNP CPUID lookups still rely on fetching
specific CPUID fields from hypervisor, GetCpuidHyp() is used there as
well.
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Create a function that can be used to determine if VM is running as an
SEV-SNP guest.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the OvmfPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Andrew Fish <afish@apple.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3731
Fix VS2019 NOOPT build issues with OvmfPkg/Microvm/MicrovmX64.dsc
by fixing typecast of MICROVM_GED_MMIO_BASE_REGS to a VOID *.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3722
Fix VS2019 NOOPT build issues related to converting
a larger integer value to a smaller integer value.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3688
Use DEBUG_LINE_NUMBER instead of __LINE__.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Michael Kubacki <michael.kubacki@microsoft.com>
Relocate QemuFwCfgLib to OvmfPkg/Library/QemuFwCfgLib and rename
it to QemuFwCfgLibMmio, this library is leverage by both ARM and
RISC-V archs.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Microvm has no LPC bridge, so drop the PciSioSerialDxe driver.
Use SerialDxe instead, with ioport hardcoded to 0x3f8 aka com1 aka ttyS0.
With this tianocore boots to uefi shell prompt on the serial console.
Direct kernel boot can be used too.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Handle the TPM 2 physical presence interface (PPI) opcodes in
PlatformBootManagerBeforeConsole() before the TPM 2 platform hierarchy
is disabled. Since the handling of the PPI opcodes may require inter-
action with the user, initialize the keyboard before handling PPI codes.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Activate the default console when user interaction is required for
the processing of TPM 2 physical presence interface opcodes.
Background:
TPM 2 physical presence interface (PPI) opcodes need to be handled before
the TPM 2 platform hierarchy is disabled. Due to this requirement we will
move the function call to handle the PPI opcodes into
PlatformBootManagerBeforeConsole() which runs before the initialization
of the consoles. However, since for interaction with the user we need
the console to be available, activate it now before displaying any message
to the user.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
To avoid the potential inconsistency between PcdAcpiS3Enable and
QemuFwCfgS3Enabled(), this commit modifies PlatformBootManagerLib to
detect S3 support by PcdAcpiS3Enable as modules in MdeModulePkg do.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
To avoid the potential inconsistency between PcdAcpiS3Enable and
QemuFwCfgS3Enabled(), this commit modifies LockBoxLib to detect
S3 support by PcdAcpiS3Enable as modules in MdeModulePkg do.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
Now with everything in place for virtio 1.0 devices we can let
VirtioMmioInit() return SUCCESS.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Use QueueNumMax as QueueNum default for drivers which do not
explicitly call VIRTIO_DEVICE_PROTOCOL->SetQueueSize().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Virtio 1.0 allows a more flexible virtio ring layout, so we have to set
addresses for descriptors avail flags and use flags separately. We
continue to use a ring layout compatible with virtio 0.9.5 though, so no
other changes are needed to setup the virtio queues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Nothing to do here for virtio 1.0 devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add #defines for the Version field. Read and store the version,
log the version found as info message.
Continue to return UNSUPPORTED for now, we need some more patches
to complete virtio 1.0 support first.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BlobVerifierLib will be used to verify blobs fetching them from QEMU's
firmware config (fw_cfg) in platforms that enable such verification.
The null implementation BlobVerifierLibNull treats all blobs as valid.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Support QEMU's -kernel option.
Create a QemuKernel.c for PlatformBootManagerLibGrub
which is an exact copy of the file
PlatformBootManagerLib/QemuKernel.c .
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Make it clear that X86QemuLoadImageLib relies on fw_cfg; prepare the
ground to add a warning about the incompatibility with boot verification
process.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210628105110.379951-6-dovmurik@linux.ibm.com>
Remove the QemuFwCfgLib interface used to read the QEMU cmdline
(-append argument) and the initrd size. Instead, use the synthetic
filesystem QemuKernelLoaderFs which has three files: "kernel", "initrd",
and "cmdline".
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3457
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20210628105110.379951-5-dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When QemuLoadKernelImage() ends successfully, the command-line blob is
not freed, even though it is not used elsewhere (its content is already
copied to KernelLoadedImage->LoadOptions). The memory leak bug was
introduced in commit 7c47d89003 ("OvmfPkg: implement QEMU loader
library for X86 with legacy fallback", 2020-03-05).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Fixes: 7c47d89003
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20210628105110.379951-3-dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
When QemuLoadKernelImage() ends successfully, the command-line blob is
not freed, even though it is not used elsewhere (its content is already
copied to KernelLoadedImage->LoadOptions). The memory leak bug was
introduced in commit ddd2be6b00 ("OvmfPkg: provide a generic
implementation of QemuLoadImageLib", 2020-03-05).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Fixes: ddd2be6b00
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20210628105110.379951-2-dovmurik@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Rename "XenSupport.c" to "ScanForRootBridges.c", after the main function
in it.
Update the file-top comments; refer to both Bhyve and Xen.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-36-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLibScan/PciHostBridgeLibScan.inf"
instance is used in the following platforms in edk2:
OvmfPkg/Bhyve/BhyveX64.dsc
OvmfPkg/OvmfXen.dsc
Neither Bhyve nor Xen provide a Q35 board, therefore the expression
PcdGet16 (PcdOvmfHostBridgePciDevId) != INTEL_Q35_MCH_DEVICE_ID
always evaluates to TRUE, in the PciHostBridgeLibScan instance.
Replace the expression with constant TRUE, eliminating the PCD dependency.
(In effect, this reports that the root bridge being registered does not
support extended PCI config space.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-35-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLibScan/PciHostBridgeLibScan.inf"
instance is used in the following platforms in edk2:
OvmfPkg/Bhyve/BhyveX64.dsc
OvmfPkg/OvmfXen.dsc
Both platforms define "PcdPciDisableBusEnumeration" with Fixed-at-Build
access method, and TRUE value. Remove the PCD from the
PciHostBridgeLibScan instance, and everything else that is useful only
when the PCD is FALSE.
In practice, this removes the PciHostBridgeUtilityGetRootBridges()
function call, which is based on fw-cfg; see
"OvmfPkg/Library/PciHostBridgeUtilityLib/PciHostBridgeUtilityLib.c".
(Note that the dependency on PciHostBridgeUtilityLib remains in place,
given that the PciHostBridgeLibScan instance continues using lower-level
functions from the library that do not depend on fw-cfg.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-34-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf" instance is
used by the following platforms in edk2:
OvmfPkg/AmdSev/AmdSevX64.dsc
OvmfPkg/OvmfPkgIa32.dsc
OvmfPkg/OvmfPkgIa32X64.dsc
OvmfPkg/OvmfPkgX64.dsc
All these platforms statically inherit PcdPciDisableBusEnumeration=FALSE
from "MdeModulePkg.dec". Remove the the PCD and everything that depends on
it from the PciHostBridgeLib instance. Namely, remove the logic that
determines the root bridge apertures by (a) scanning the entire bus,
device and function number space, and (b) parsing the BAR values that were
pre-set by the Bhyve or Xen machinery.
"XenSupport.c" used to be listed explicitly in "Maintainers.txt", remove
it from that spot too.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-33-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Create an almost verbatim copy of the
"OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf" library instance.
The new PciHostBridgeLibScan instance will ultimately duplicate a
negligible amount of code from the original, and will be used by the Bhyve
and OvmfXen platforms.
List the new driver in "Maintainers.txt", in the "OvmfPkg: bhyve-related
modules" and "OvmfPkg: Xen-related modules" sections.
This patch should be reviewed with "git show --find-copies-harder".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-30-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
- In every C file, list every necessary public #include individually, with
an example identifier that's actually consumed.
- Place all public #includes first, all module-private #includes second.
Separate them with a single empty line. Keep each section sorted in
itself.
- Sort all sections in the INF file, except [Defines].
- Add unlisted lib classes.
- Remove unnecessary #include directives, add unlisted #include
directives.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-29-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This error was found while compiling VirtioMmioDeviceLib for X64
with the GCC5 toolchain, where EFIAPI makes a difference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210602045935.762211-1-kraxel@redhat.com>
[lersek@redhat.com: prepend module name to subject, trim subject back to
allowed length]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The Flush parameter is used to provide a hint whether the specified range
is Mmio address. Now that we have a dedicated helper to clear the
memory encryption mask for the Mmio address range, its safe to remove the
Flush parameter from MemEncryptSev{Set,Clear}PageEncMask().
Since the address specified in the MemEncryptSev{Set,Clear}PageEncMask()
points to a system RAM, thus a cache flush is required during the
encryption mask update.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210519181949.6574-14-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The MemEncryptSevClearMmioPageEncMask() helper can be used for clearing
the memory encryption mask for the Mmio region.
The MemEncryptSevClearMmioPageEncMask() is a simplified version of
MemEncryptSevClearPageEncMask() -- it does not flush the caches after
clearing the page encryption mask.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20210519181949.6574-10-brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
Enabling TPM support results in guest termination of an SEV-ES guest
because it uses MMIO opcodes that are not currently supported.
Add support for the new MMIO opcodes (0xA0 - 0xA3), MOV instructions which
use a memory offset directly encoded in the instruction. Also, add a DEBUG
statement to identify an unsupported MMIO opcode being used.
Fixes: c45f678a1e
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <2fdde57707b52ae39c49341c9d97053aaff56e4a.1619716333.git.thomas.lendacky@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
The MOVZX and MOVSX instructions use the ModRM byte in the instruction,
but the instruction decoding support was not decoding it. This resulted
in invalid decoding and failing of the MMIO operation. Also, when
performing the zero-extend or sign-extend operation, the memory operation
should be using the size, and not the size enumeration value.
Add the ModRM byte decoding for the MOVZX and MOVSX opcodes and use the
true data size to perform the extend operations. Additionally, add a
DEBUG statement identifying the MMIO address being flagged as encrypted
during the MMIO address validation.
Fixes: c45f678a1e
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <5949d54cb2c9ab69256f67ed5654b32654c0501c.1619716333.git.thomas.lendacky@amd.com>
We are going to use the page table structure in yet another place,
collect the types and macro that can be used from another module
rather than making yet another copy.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2490
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <20210412133003.146438-5-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The CommandLine and InitrdData may be set to NULL if the provided
size is too large. Because the zero page is mapped, this would not
cause an immediate crash but can lead to memory corruption instead.
This patch just adds validation and returns error if either allocation
has failed.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Message-Id: <YFPJsaGzVWQxoEU4@martin-ThinkPad-T440p>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
[lersek@redhat.com: drop unnecessary empty line from code; remove personal
(hence likely unstable) repo reference from commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Call the CPU hot-eject handler if one is installed. The condition for
installation is (PcdCpuMaxLogicalProcessorNumber > 1), and there's
a hot-unplug request.
The handler is called from SmmCpuFeaturesRendezvousExit(), which is
in-turn called at the tail-end of SmiRendezvous() after the BSP has
signalled an SMI exit via the "AllCpusInSync" loop.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-8-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Init CPU_HOT_EJECT_DATA, which will be used to share CPU ejection
state between SmmCpuFeaturesLib (via PiSmmCpuDxeSmm) and CpuHotPlugSmm.
The init happens via SmmCpuFeaturesSmmRelocationComplete(), and so it
will run as part of the PiSmmCpuDxeSmm entry point function,
PiCpuSmmEntry(). Once inited, CPU_HOT_EJECT_DATA is exposed via
PcdCpuHotEjectDataAddress.
The CPU hot-eject handler (CPU_HOT_EJECT_DATA->Handler) is setup when
there is an ejection request via CpuHotplugSmm.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-7-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Extend parameter list of PciHostBridgeUtilityGetRootBridges() with BusMin/
BusMax, so that the utility function could be compatible with ArmVirtPkg
who uses mutable bus range [BusMin, BusMax] insteand of [0, PCI_MAX_BUS].
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210119011302.10908-10-cenjiahui@huawei.com>
[lersek@redhat.com: fix logging of UINTN values BusMin, BusMax]
[lersek@redhat.com: keep zeroing of (*Count) centralized]
[lersek@redhat.com: fix typos in ExtraRootBridges comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
OvmfPkg/PciHostBridgeLib instance fails to list its PcdLib dependency,
both between the #include directives, and in the INF file. So let's list
the dependency.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210119011302.10908-4-cenjiahui@huawei.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
When SEV-ES is active, and MMIO operation will trigger a #VC and the
VmgExitLib exception handler will process this MMIO operation.
A malicious hypervisor could try to extract information from encrypted
memory by setting a reserved bit in the guests nested page tables for
a non-MMIO area. This can result in the encrypted data being copied into
the GHCB shared buffer area and accessed by the hypervisor.
Prevent this by ensuring that the MMIO source/destination is un-encrypted
memory. For the APIC register space, access is allowed in general.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0cf28470ad5e694af45f7f0b35296628f819567d.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to be able to issue messages or make interface calls that cause
another #VC (e.g. GetLocalApicBaseAddress () issues RDMSR), add support
for nested #VCs.
In order to support nested #VCs, GHCB backup pages are required. If a #VC
is received while currently processing a #VC, a backup of the current GHCB
content is made. This allows the #VC handler to continue processing the
new #VC. Upon completion of the new #VC, the GHCB is restored from the
backup page. The #VC recursion level is tracked in the per-vCPU variable
area.
Support is added to handle up to one nested #VC (or two #VCs total). If
a second nested #VC is encountered, an ASSERT will be issued and the vCPU
will enter CpuDeadLoop ().
For SEC, the GHCB backup pages are reserved in the OvmfPkgX64.fdf memory
layout, with two new fixed PCDs to provide the address and size of the
backup area.
For PEI/DXE, the GHCB backup pages are allocated as boot services pages
using the memory allocation library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <ac2e8203fc41a351b43f60d68bdad6b57c4fb106.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Update the MemEncryptSevLib library to include an interface that can
report the encryption state on a range of memory. The values will
represent the range as being unencrypted, encrypted, a mix of unencrypted
and encrypted, and error (e.g. ranges that aren't mapped).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0d98f4d42a2b67310c29bac7bcdcf1eda6835847.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In preparation for a new interface to be added to the MemEncryptSevLib
library that will be used in SEC, create an SEC version of the library.
This requires the creation of SEC specific files.
Some of the current MemEncryptSevLib functions perform memory allocations
which cannot be performed in SEC, so these interfaces will return an error
during SEC. Also, the current MemEncryptSevLib library uses some static
variables to optimize access to variables, which cannot be used in SEC.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <bc7fa76cc23784ab3f37356b6c10dfec61942c38.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Creating an SEC version of the library requires renaming an existing file
which will result in the existing code failing ECC. Prior to renaming the
existing file, fix the coding style to avoid the ECC failure.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f765d867da4a703e0a0db35e26515a911482fd40.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Check the DR7 cached indicator against a specific value. This makes it
harder for a hypervisor to just write random data into that field in an
attempt to use an invalid DR7 value.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <65157c1155a9c058c43678400dfc0b486e327a3e.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
The early assembler code performs validation for some of the SEV-related
information, specifically the encryption bit position. The new
MemEncryptSevGetEncryptionMask() interface provides access to this
validated value.
To ensure that we always use a validated encryption mask for an SEV-ES
guest, update all locations that use CPUID to calculate the encryption
mask to use the new interface.
Also, clean up some call areas where extra masking was being performed
and where a function call was being used instead of the local variable
that was just set using the function.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <9de678c0d66443c6cc33e004a4cac0a0223c2ebc.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
To ensure that we always use a validated encryption mask for an SEV-ES
guest, create a new interface in the MemEncryptSevLib library to return
the encryption mask. This can be used in place of the multiple locations
where CPUID is used to retrieve the value (which would require validation
again) and allows the validated mask to be returned.
The PEI phase will use the value from the SEV-ES work area. Since the
SEV-ES work area isn't valid in the DXE phase, the DXE phase will use the
PcdPteMemoryEncryptionAddressOrMask PCD which is set during PEI.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e12044dc01b21e6fc2e9535760ddf3a38a142a71.1610045305.git.thomas.lendacky@amd.com>
This patch fixes an issue with the current programming of the i440fx
PCI Interrupt routing assignment.
Explanation by Laszlo Ersek:
(1) The rotating pattern is a map:
(slot, function) --> (interrupt link) [LNKA..LNKD]
(more precisely, it is a pattern from (slot, pin) to (interrupt link),
but function<->pin is an identity mapping in the QEMU hardware, so we
can just use (slot, function) rather than (slot, pin) on the left hand
side. But I digress.)
The ACPI _PRT object is generated by QEMU; it describes this map.
(2) Another map is
(interrupt link) --> { set of possible interrupt numbers,
for this link }
This map is given by the LNK[A..D] ACPI objects, also given by QEMU.
(3) What the firmware is expected to do is:
(3a) for each interrupt link, select an *actual* interrupt from the set
that's possible for that link, yielding a deterministic map
(interrupt link) --> (actual interrupt number)
and
(3b) for each PCI device/function with an interrupt pin, resolve the
(slot, function) --> (interrupt link) --> (actual interrupt number)
functional composition, and program the result into the Interrupt Line
register of the device.
In OVMF, we do not parse the rotating map described under (1) from
QEMU's _PRT object. Instead, we duplicate the code. This is not a
problem.
In OVMF, we also do not parse the map described under (2) from QEMU's
ACPI content. Instead, we pick a specific selection (3a) that we
"apriori" know satisfies (2). This is also not a problem. OVMF's
particular selection is the PciHostIrqs table.
(
Table (2) from QEMU is
LNKA -> { 5, 10, 11 }
LNKB -> { 5, 10, 11 }
LNKC -> { 5, 10, 11 }
LNKD -> { 5, 10, 11 }
and our specific pick in OVMF, in the PciHostIrqs table, is
LNKA -> 10
LNKB -> 10
LNKC -> 11
LNKD -> 11
)
In OVMF, we also cover step (3b), in the SetPciIntLine() function.
What's missing in OVMF -- and what this patch corrects -- is that we
currently fail to program our selection for table (3) into the hardware.
We pick a specific LNKx->IRQ# mapping for each interrupt link, and we
correctly program the PCI Interrupt Line registers through those
link-to-IRQ mappings -- but we don't tell the hardware about the
link-to-IRQ mappings. More precisely, we program such a link-to-IRQ
mapping table into the hardware that is then not matched by the mapping
we use for programming the PCI device/function interrupt lines. As a
result, some PCI Interrupt Line registers will have impossible values --
a given (slot, function) may use a particular link, but also report an
interrupt number that was never picked for that link.
Output of Linux PCI Interrupt Links for i440fx before the patch:
[ 0.327305] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
[ 0.327944] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.328582] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[ 0.329208] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10 11)
[ 0.329807] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
after the patch:
[ 0.327292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.327934] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.328564] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.329195] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.329785] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
Output of Linux PCI Interrupt Links for q35 before the patch:
[ 0.307474] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.308027] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.308764] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.309310] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.309853] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.310508] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.311051] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.311589] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
after the patch:
[ 0.301991] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.302833] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.303354] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.303873] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.304399] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.304918] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.305436] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.305954] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <8dbedc4c7a1c3fd390aca915270814e3b35e13a5.camel@amazon.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is used to package up the grub bootloader into a firmware volume
where it can be executed as a shell like the UEFI Shell. Grub itself
is built as a minimal entity into a Fv and then added as a boot
option. By default the UEFI shell isn't built but for debugging
purposes it can be enabled and will then be presented as a boot option
(This should never be allowed for secure boot in an external data
centre but may be useful for local debugging). Finally all other boot
options except grub and possibly the shell are stripped and the boot
timeout forced to 0 so the system will not enter a setup menu and will
only boot to grub. This is done by copying the
Library/PlatformBootManagerLib into Library/PlatformBootManagerLibGrub
and then customizing it.
Boot failure is fatal to try to prevent secret theft.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Message-Id: <20201130202819.3910-4-jejb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
[lersek@redhat.com: replace local variable initialization with assignment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: squash 'OvmfPkg: add "gGrubFileGuid=Grub" to
GuidCheck.IgnoreDuplicates', reviewed stand-alone by Phil (msgid
<e6eae551-8563-ccfb-5547-7a97da6d46e5@redhat.com>) and Ard (msgid
<10aeda37-def6-d9a4-6e02-4c66c1492f57@arm.com>)]
Fix the order of libraries and update INF_VERSION to 1.29.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-4-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
The code style in Library/BhyveFwCtlLib/BhyveFwCtlLib.c was very
inconsistent. Fix it to pass the ECC tool checks by typedef'ing
structs, and improve indentation.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-3-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Update BhyveFwCtlLib.c to fix problems with UINT32/UINTN types that
prevented Bhyve from building with VS2019.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Message-Id: <20201130053412.2-2-rebecca@bsdio.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
On bhyve, either an Intel or AMD host bridge can be specified, with the
default being Intel.
Both are identical, except the AMD one uses a PCI vendor ID of AMD.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201124005733.18107-3-rebecca@bsdio.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The QemuFlashPtrWrite() flash services runtime uses the GHCB and VmgExit()
directly to perform the flash write when running as an SEV-ES guest. If an
interrupt arrives between VmgInit() and VmgExit(), the Dr7 read in the
interrupt handler will generate a #VC, which can overwrite information in
the GHCB that QemuFlashPtrWrite() has set. This has been seen with the
timer interrupt firing and the CpuExceptionHandlerLib library code,
UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/
Xcode5ExceptionHandlerAsm.nasm and
ExceptionHandlerAsm.nasm
reading the Dr7 register while QemuFlashPtrWrite() is using the GHCB. In
general, it is necessary to protect the GHCB whenever it is used, not just
in QemuFlashPtrWrite().
Disable interrupts around the usage of the GHCB by modifying the VmgInit()
and VmgDone() interfaces:
- VmgInit() will take an extra parameter that is a pointer to a BOOLEAN
that will hold the interrupt state at the time of invocation. VmgInit()
will get and save this interrupt state before updating the GHCB.
- VmgDone() will take an extra parameter that is used to indicate whether
interrupts are to be (re)enabled. Before exiting, VmgDone() will enable
interrupts if that is requested.
Fixes: 437eb3f7a8
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c326a4fd78253f784b42eb317589176cf7d8592a.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bit for the scratch
area field (SwScratch).
Fixes: c45f678a1e
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <45ccb63c2dadd834e2c47bf10c9e59c6766d7eb6.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bit for the scratch
area field (SwScratch).
Fixes: 0020157a98
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <f817d034cea37fa78e00e86f61c3445f1208226d.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
All fields that are set in the GHCB should have their associated bit in
the GHCB ValidBitmap field set. Add support to set the bits for the
software exit information fields when performing a VMGEXIT (SwExitCode,
SwExitInfo1, SwExitInfo2).
Fixes: 61bacc0fa1
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <986e157c13bf33e529b1d16ab1b52e99a74a734f.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The VmgExitLib library added two new interfaces, VmgSetOffsetValid() and
VmgIsOffsetValid(), that must now be implemented in the OvmfPkg version
of the library.
Implement VmgSetOffsetValid() and VmgIsOffsetValid() and update existing
code, that is directly accessing ValidBitmap, to use the new interfaces.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <939e9dc375e6085bc67942fe9a00ecd4c6b77ecf.1604685192.git.thomas.lendacky@amd.com>
There is a DEBUG warning printout in VirtioMmioDeviceLib if the current
device's VendorID does not match the traditional 16-bit Red Hat PCIe
vendor ID used with virtio-pci. The virtio-mmio vendor ID is 32-bit and
has no connection to the PCIe registry.
Most specifically, this causes a bunch of noise when booting an AArch64
QEMU platform, since QEMU's virtio-mmio implementation used 'QEMU' as
the vendor ID:
VirtioMmioInit: Warning:
The VendorId (0x554D4551) does not match the VirtIo VendorId (0x1AF4).
Drop the warning message.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Create a function that can be used to determine if the VM is running
as an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a DR7 read or write intercept generates a #VC exception.
The #VC handler must provide special support to the guest for this. On
a DR7 write, the #VC handler must cache the value and issue a VMGEXIT
to notify the hypervisor of the write. However, the #VC handler must
not actually set the value of the DR7 register. On a DR7 read, the #VC
handler must return the cached value of the DR7 register to the guest.
VMGEXIT is not invoked for a DR7 register read.
The caching of the DR7 values will make use of the per-CPU data pages
that are allocated along with the GHCB pages. The per-CPU page for a
vCPU is the page that immediately follows the vCPU's GHCB page. Since
each GHCB page is unique for a vCPU, the page that follows becomes
unique for that vCPU. The SEC phase will reserves an area of memory for
a single GHCB and per-CPU page for use by the BSP. After transitioning
to the PEI phase, new GHCB and per-CPU pages are allocated for the BSP
and all APs.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MWAIT/MWAITX intercept generates a #VC exception.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MONITOR/MONITORX intercept generates a #VC exception.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDTSCP intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a VMMCALL intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a INVD intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDPMC intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDTSC intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a WBINVD intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a NPF intercept for an NPT entry with a reserved bit set
generates a #VC exception. This condition is assumed to be an MMIO access.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a NPF NAE
event for MMIO. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXIT_INFO1, SW_EXITINFO2 and SW_SCRATCH values in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MSR_PROT intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support an MSR_PROT
NAE event. Parse the instruction that generated the #VC exception to
determine whether it is RDMSR or WRMSR, setting the required register
register values in the GHCB and creating the proper SW_EXIT_INFO1 value in
the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a CPUID intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a CPUID NAE
event. Additionally, CPUID 0x0000_000d (CPUID_EXTENDED_STATE) requires
XCR0 to be supplied in the GHCB, so add support to issue the XGETBV
instruction.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Add support to the #VC exception handler to handle string IO. This
requires expanding the IO instruction parsing to recognize string based
IO instructions as well as preparing an un-encrypted buffer to be used
to transfer (either to or from the guest) the string contents for the IO
operation. The SW_EXITINFO2 and SW_SCRATCH fields of the GHCB are set
appropriately for the operation. Multiple VMGEXIT invocations may be
needed to complete the string IO operation.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The base VmgExitLib library provides a default limited interface. As it
does not provide full support, create an OVMF version of this library to
begin the process of providing full support of SEV-ES within OVMF.
SEV-ES support is only provided for X64 builds, so only OvmfPkgX64.dsc is
updated to make use of the OvmfPkg version of the library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Sean reports that having two DEC files under OvmfPkg violates the DEC
spec:
> An EDK II Package (directory) is a directory that contains an EDK II
> package declaration (DEC) file. Only one DEC file is permitted per
> directory. EDK II Packages cannot be nested within other EDK II
> Packages.
This issue originates from commit 656419f922 ("Add BhyvePkg, to support
the bhyve hypervisor", 2020-07-31).
Remedy the problem as follows. (Note that these steps are not split to
multiple patches in order to keep Bhyve buildable across the transition.)
(1) Delete "OvmfPkg/Bhyve/BhyvePkg.dec".
(2) Point the [Packages] sections of the Bhyve-specific AcpiPlatformDxe,
BhyveRfbDxe, and BhyveFwCtlLib INF files to "OvmfPkg.dec".
(3) Migrate the artifacts that "BhyvePkg.dec" used to have on top of
"OvmfPkg.dec" as follows:
(3a) Merge the copyright notices from Rebecca Cran and Pluribus Networks
into "OvmfPkg.dec".
(3b) Merge the "BhyveFwCtlLib" class header definition into "OvmfPkg.dec".
(3c) Merge value 0x2F8 for the fixed PcdDebugIoPort into
"BhyvePkgX64.dsc".
(4) Unnest the the Include/Library/ and Library/ subtrees from under
OvmfPkg/Bhyve to the corresponding, preexistent subtrees in OvmfPkg.
The goal is to keep the [Includes] section in the "OvmfPkg.dec" file
unchanged, plus simplify references in "BhyvePkgX64.dsc". Non-library
modules remain under "OvmfPkg/Bhyve/".
(4a) The BhyveFwCtlLib class header, and sole instance, are already
uniquely named, so their movements need not involve file renames.
(4b) Rename the Bhyve-specific PlatformBootManagerLib instance to
PlatformBootManagerLibBhyve, in additon to moving it, for
distinguishing it from OvmfPkg's preexistent lib instance. Apply the
name change to all three of the lib instance directory name, the INF
file, and the BASE_NAME define in the INF file.
(4c) Update lib class resolutions in "BhyvePkgX64.dsc" accordingly.
(5) Replace the "ACPI table storage" FILE_GUID in
"OvmfPkg/Bhyve/AcpiTables/AcpiTables.inf" with a new GUID, and
open-code the "ACPI table storage" GUID in the "ACPITABLE" FDF rule
instead, replacing $(NAMED_GUID). This step is necessary because CI
requires unique FILE_GUIDs over all INF files, and OVMF's original
"AcpiTables.inf" already uses the "ACPI table storage" GUID as
FILE_GUID.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sean Brogan <spbrogan@outlook.com>
Fixes: 656419f922
Reported-by: Sean Brogan <spbrogan@outlook.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200801155024.16439-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
gBS->LoadImage() returning EFI_NOT_FOUND is an expected condition; it
means that QEMU wasn't started with "-kernel". Log this status code as
INFO rather than ERROR.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200609105414.12474-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
When an image fails Secure Boot validation, LoadImage() returns
EFI_SECURITY_VIOLATION if the platform policy is
DEFER_EXECUTE_ON_SECURITY_VIOLATION.
If the platform policy is DENY_EXECUTE_ON_SECURITY_VIOLATION, then
LoadImage() returns EFI_ACCESS_DENIED (and the image does not remain
loaded).
(Before <https://bugzilla.tianocore.org/show_bug.cgi?id=2129>, this
difference would be masked, as DxeImageVerificationLib would incorrectly
return EFI_SECURITY_VIOLATION for DENY_EXECUTE_ON_SECURITY_VIOLATION as
well.)
In X86QemuLoadImageLib, proceed to the legacy Linux/x86 Boot Protocol upon
seeing EFI_ACCESS_DENIED too.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2785
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200605235242.32442-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add a null implementation library for QemuFwCfgLib, in order to
support building PciHostBridgeLib for bhyve.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200503230910.26783-1-rebecca@bsdio.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On bhyve, the ACPI timer is located at a fixed IO address; it need
not be programmed into, nor fetched from, the PMBA -- power
management base address -- register of the PCI host bridge.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20200430011212.612386-1-rebecca@bsdio.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a minimal, NULL class library called "PxeBcPcdProducerLib" for setting
the "PcdIPv4PXESupport" and "PcdIPv6PXESupport" PCDs of NetworkPkg, from
fw_cfg.
These PCDs control whether the UefiPxeBcDxe driver supports PXEv4 / PXEv6
boot. If a PXE version is disabled, the corresponding LoadFile protocol
instance is not produced by UefiPxeBcDxe, and so
EfiBootManagerRefreshAllBootOption() in UefiBootManagerLib does not
generate corresponding *new* boot options either. (Existent boot options
are not deleted.)
Hook the library into the UefiPxeBcDxe driver. (The driver is already
included from "NetworkComponents.dsc.inc", but we can list it again in the
DSC file, for providing <LibraryClasses> overrides.)
In OVMF, the PCDs could be set in PlatformPei too, but ArmVirtQemu does
not have fw_cfg access in the PEI phase. Hence a NULL class library that
can be linked into UefiPxeBcDxe.
When listing the PCDs under [PcdsDynamicDefault], stick with the DEC
default values.
QEMU switches:
-fw_cfg name=opt/org.tianocore/IPv4PXESupport,string=[yn]
-fw_cfg name=opt/org.tianocore/IPv6PXESupport,string=[yn]
The "opt/org.tianocore" prefix follows the "opt/RFQDN/" recommendation
from QEMU's "docs/specs/fw_cfg.txt".
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We don't distribute UEFI_DRIVER modules stand-alone that were built as
part of an OVMF platform. OVMF's UEFI_DRIVERs are allowed to inherit
platform dependencies.
By enabling UEFI_DRIVERs to consume QemuFwCfgDxeLib, we can hook
fw_cfg-based NULL class libraries into UEFI drivers, e.g. in order to set
dynamic PCDs.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We already parse some boolean and integer values from named fw_cfg files
(usually into PCDs), and we're going to cover more. Add a dedicated
library for centralizing the parsing logic.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce PlatformRomDebugLibIoPortNocheck which doesn't try to detect
the debug IO port. Instead, debug logs are always written to the IO port.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-5-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Factor out debug port detection in PlatformDebugLibIoPort.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-4-anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We are going to reuse PlatformDebugLibIoPort to use debug IO port from
hypervisors that aren't QEMU, so reword "QEMU" to "hypervisor" in the
descriptions.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-3-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseResetSystemLib instance is not suitable for OS runtime, because
its ResetShutdown() implementation calls PciRead16 (OVMF_HOSTBRIDGE_DID).
On q35, this boils down to a memory-mapped config space access -- but we
never ask the OS to map MMCONFIG for runtime.
There are at least three alternatives to approach this:
(1) Investigate "MdePkg/Library/DxeRuntimePciExpressLib", which offers
some kind of runtime mapping for MMCONFIG.
(2) Consume PciCf8Lib directly, rather than PciLib, in ResetSystemLib.
Then we'll read OVMF_HOSTBRIDGE_DID from the config space with IO port
accesses on q35 too, not just on i440fx. IO ports don't depend on page
tables.
(3) In the lib constructor, cache "mAcpiPmBaseAddress" based on
"PcdOvmfHostBridgePciDevId" (which is set by PlatformPei). Then the
host bridge type will be known at runtime without PCI config space
accesses.
This patch follows approach (3), in order to mirror AcpiTimerLib.
Notes:
* This patch is best viewed with "git show --find-copies-harder -C43".
* PCDs are not usable in the DXE_CORE, as the PCD PPI is gone, and the PCD
protocol is not available yet. (The DXE_CORE does consume ResetSystemLib
in practice, when OVMF is built with -D SOURCE_DEBUG_ENABLE.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
[lersek@redhat.com: move third Note (with repro info) to BZ comment]
Min M Xu
Laszlo Ersek
Pierre Gondois
Anthony PERARD
Nicolas Ojeda Leon
Sebastien Boeuf
Gerd Hoffmann
Rebecca Cran
Brijesh Singh
Abner Chang
Stefan Berger
Brijesh Singh via groups.io
Michael Roth
Michael Kubacki
Michael D Kinney
Stefan Berger
Lin, Gary (HPS OE-Linux)
Dov Murik
James Bottomley
Lendacky, Thomas
Martin Radev
Ankur Arora
Jiahui Cen via groups.io
Borghorst, Hendrik via groups.io
Rebecca Cran
Leif Lindholm