This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Brackets are also added to comply to with the coding
standard.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The header of the file is not formatted properly, making
the Ecc tool crash when running on the ArmPkg.
The following command was run:
./BaseTools/BinWrappers/PosixLike/Ecc
-c BaseTools/Source/Python/Ecc/config.ini
-e BaseTools/Source/Python/Ecc/exception.xml
-t ArmPkg -r ArmPkgEcc.xls
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
When Affinity Routing enabled, the GICR_IPRIORITYR<n> is used to set
priority for SGIs and PPIs instead of GICD_IPRIORITYR<n>.
This patch calls ArmGicSetInterruptPriority() helper function when
setting priority to handle the difference.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
According to ARM IHI 0069F, section 11.9.18 GICD_IPRIORITYR<n>,
Interrupt Priority Registers, n = 0 - 254, when affinity routing is
enabled for the Security state of an interrupt, GICR_IPRIORITYR<n>
is used instead of GICD_IPRIORITYR<n> where n = 0 to 7 (that is, for
SGIs and PPIs).
As setting interrupt priority for SGIs and PPIs are handled using
difference registers depends on the mode, this patch instroduces
ArmGicSetInterruptPriority() helper function to handle the discrepancy.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
ArmReadIdPfr0 () and ArmReadIdPfr1 () are now used only inside ArmLib.
Remove the prototypes from the public header to discourage new id
register accessor additions, and direct id register access in general.
Move them into local header Arm/ArmV7Lib.h.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
ArmReadIdPfr0 is now used only inside ArmLib. Rename the AArch64
variant ArmReadIdAA64Pfr0 and add a declaration of that only into
local header AArch64/AArch64Lib.h.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The AArch64 version of ArmReadIdPfr1 is not used by any code in tree,
or in edk2-platforms. Delete it.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Create a helper function to eliminate direct feature register reading.
Returns BOOLEAN True if the CPU implements the Security extensions,
otherwise returns BOOL False.
This function is only implemented for ARM, not AArch64.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The ID register access was the only difference between them, so
after switching to the ArmHasGicSystemRegisters () helper, there
is no longer any need to have separate ARM/AArch64 source files
for ArmGicArchSecLib, so unify them and drop the subdirectories.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The ID register access was the only difference between them, so
after switching to the ArmHasGicSystemRegisters () helper, there
is no longer any need to have separate ARM/AArch64 source files
for ArmGicArchLib, so unify them and drop the subdirectories.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Create a helper function to eliminate direct feature register reading,
which gets messy in code shared between ARM/AArch64.
Returns BOOLEAN True if the CPU implements the GIC System Register
Interface (any version), otherwise returns BOOL False.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
As shift = (OpCode >> 5) & 0x3, shift will never be larger than 0x3,
so the comparison between shift and 0x12 will always be false. The right
shift type of ASR is 0x2.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The function ArmReplaceLiveTranslationEntry () is passed as a VOID
pointer to WriteBackDataCacheRange (). This produces the following
warning on VS2019:
warning C4152: nonstandard extension, function/data pointer
conversion in expression
This change explicitly casts the argument to the formal parameter
type VOID*.
This can be reproduced with the following build command:
build -b DEBUG -a AARCH64 -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2835
There's several occurrences of a UINT64 or an EFI_PHYSICAL_ADDRESS
being assigned to a UINT32 value in ArmMmuLib. These result in
warning C4244 in VS2019:
warning C4244: '=': conversion from 'UINT64' to 'UINT32', possible
loss of data
warning C4244: '=': conversion from 'EFI_PHYSICAL_ADDRESS' to
'UINT32', possible loss of data
This change explicitly casts the values to UINT32.
These can be reproduced with the following build command:
build -b DEBUG -a ARM -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
While building with the following command line:
build -b DEBUG -a AARCH64 -t VS2017 -p MdeModulePkg\MdeModulePkg.dsc
A missing cast triggers the following warning, then triggering an error:
ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c(652):
warning C4152: nonstandard extension, function/data pointer
conversion in expression
This patch first casts the function pointer to (UINTN), then to (VOID *),
followowing the C99 standard s6.3.2.3 "Pointer", paragraphs 5 and 6.
This suppresses the warning.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
One of the side effects of the recent changes to PlatformBootManagerLib
changes to avoid connecting all devices on every boot is that we no
longer default to network boot on a virgin boot, but end up in the
UiApp menu. At this point, the UiApp will instantiate the autogenerated
boot options that we used to rely on as before, but since we are already
sitting idle in the root UiApp menu at that point, it does break the
unattended boot case where devices are expected to attempt a network
boot on the very first power on.
Let's work around this by refreshing all boot options explicitly in
the UnableToBoot() handler, and rebooting the system if doing so
resulted in a change to the total number of configured boot options.
This way, we ultimately end up in the UiApp as before if no boot
options could be started, but only after all the autogenerated ones
have been attempted as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
The exception library is also used in DxeMain before memory services
are available, and AllocatePages() will fail in this case and cause
sp_el0 remains 0. Then if any exception occurs before CpuDxe driver is
loaded, a recursive exception will be trigged by page translation
fault for sp = 0 - 0x130.
Use static buffer instead to fix this issue.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Commit 045e4b84c1 ("ArmPkg/ArmPkg.dsc: Add missing components")
adds some components to the ArmPkg.dsc build config, but it adds
them to Components.common, and MmCommunicationDxe is AArch64 only.
Move it to Components.AARCH64 to stop the ARM build breaking.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
In order to avoid boot delays from devices such as network controllers
that may not even be involved in booting at all, drop the call to
EfiBootManagerConnectAll () from the boot path. It will be called by
UiApp, so when going through the menu, all devices will be connected
as usual, but for the default boot, it is really not necessary so
let's get rid of this.
Enumerating all possible boot options and creating Boot#### variables
for them is equally unnecessary in the default case, and also happens
automatically in UiApp, so drop that as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Without ConnectAll() being called on the boot path, the UEFI shell will
be entered with no block devices or anything else connected, and so for
the novice user, this is not a very accommodating environment. Now that
we have made the UiApp the last resort on boot failure, and made the
UEFI Shell accessible directly via the 's' hotkey if you really need
it, let's hide it as an ordinary boot option.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
As a last resort, drop into the UiApp application when no active boot
options could be started. Doing so will connect all devices, and so
it will allow the user to enter the Boot Manager submenu and pick a
network or removable disk option.
Note that this only occurs if even the default removable filepath
could not be booted (e.g., \EFI\BOOT\BOOTAA64.EFI on AArch64)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In preparation of hiding the UEFI Shell boot option as an ordinary
boot option, make sure we can invoke it directly using the 's'
hotkey. Without ConnectAll() having been called, this results in
a shell that may have no block devices or other things connected,
so don't advertise the 's' in the console string that is printed
at boot - for novice users, we will go through the UiApp which
connects everything first. For advanced use, having the ability
to invoke the UEFI shell without any devices connected may be an
advantage, so let's keep this behavior as is for now.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The way the BDS handles the short-form USB device path of the console
keyboard relies on USB host controllers to be locatable via their PCI
metadata, which implies that these controllers already have a PCI I/O
protocol installed on their handle.
This is not the case for non-discoverable USB host controllers that are
supported by the NonDiscoverable PCI device driver. These controllers
must be connected first, or the BDS will never notice their existence,
and will not enable any USB keyboards connected through them.
Let's work around this by connecting these handles explicitly. This is
a bit of a stopgap, but it is the cleanest way of dealing with this
without violating the UEFI driver model entirely. This ensures that
platforms that do not rely on ConnectAll() will keep working as
expected.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Supervisor Call instruction (SVC) is used by the Arm Standalone MM
environment to request services from the privileged software (such as
ARM Trusted Firmware running in EL3) and also return back to the
non-secure caller via EL3. Some Arm CPUs speculatively executes the
instructions after the SVC instruction without crossing the privilege
level (S-EL0). Although the results of this execution are
architecturally discarded, adversary running on the non-secure side can
manipulate the contents of the general purpose registers to leak the
secure work memory through spectre like micro-architectural side channel
attacks. This behavior is demonstrated by the SafeSide project [1] and
[2]. Add barrier instructions after SVC to prevent speculative execution
to mitigate such attacks.
[1]: https://github.com/google/safeside/blob/master/demos/eret_hvc_smc_wrapper.cc
[2]: https://github.com/google/safeside/blob/master/kernel_modules/kmod_eret_hvc_smc/eret_hvc_smc_module.c
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
PlatformBootManagerLib now asserts at build time that the correct
terminal type is used, and so leaving it unset breaks the ArmPkg
DSC build. So fix that.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the ArmPkg version of PlatformBootManagerLib, we construct a
serial device path based on the default settings for baud rate,
parity and the number of stop bits, to ensure that a serial console
is available even on the very first boot.
This assumes that PcdUartDefaultParity or PcdUartDefaultStopBits are
not set to '0', meaning 'the default', as there is no default for
these when constructing a device path.
So add a couple of STATIC_ASSERT()s to make sure that we catch this
condition, since it otherwise ignores the bogus device path silently,
which is rather tedious to debug,.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the runtime ASSERT with the build time STATIC_ASSERT on the
check that ensures that the terminal type we use for the serial
console matches the one we explicitly add to the ConIn/ConOut/StdErr
variables.
This helps catch serial console issues early, even in RELEASE builds,
reducing the risk of ending up with no console at all, which can be
tricky to debug on bare metal.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Gary reports the GCC 10 will emit calls to atomics intrinsics routines
unless -mno-outline-atomics is specified. This means GCC-10 introduces
new intrinsics, and even though it would be possible to work around this
by specifying the command line option, this would require a new GCC10
toolchain profile to be created, which we prefer to avoid.
So instead, add the new intrinsics to our library so they are provided
when necessary.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Tested-by: Gary Lin <glin@suse.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Implement the new MmCommunication2 protocol which supports the use
of standalone MM at runtime inside an address space that has been
virtually remapped by the OS.
Note that the implementation of the old MM Communicate protocol is
removed: it never worked correctly so there is no point in keeping it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The local #define TT_ATTR_INDX_INVALID is used as a local error code
in the AArch64 implementation, but is misleadingly named to match the
definitions in ArmPkg/Include/Chipset/AArch64Mmu.h.
Rename it INVALID_ENTRY to reduce confusion and improve readability.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
TT_ATTR_INDX_INVALID is #define'd but never used so drop it. Note
that this leaves a CPP macro of the same name in CpuDxe, but there,
it is actually being used, and although the name suggests that this
value is somehow defined by the architecture, this is really not the
case and it only has meaning within the scope of CpuDxe's implementation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Only a single call to GetRootTranslationTableInfo() remains, which
only provides the root table level. So let's create a new static
helper function that returns just this value, and use it instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
LookupAddresstoRootTable() uses a loop to go over its MaxAddress
argument, essentially to do a log2() and determine how many bits are
needed to represent it. Since the argument is the result of a shift-left
expression, there is some room for improvement here, and we can simply
use the bit count directly to calculate the value of T0SZ. At the same
time, we can omit calling GetRootTranslationTableInfo() to determine the
number of root table entries, and add a new helper that applies the
trivial calculation directly.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The routine PageAttributeToGcdAttribute() is exported by ArmMmuLib
but only ever used in the implementation of CpuDxe. So let's move
the function there and make it STATIC.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Before getting rid of GetRootTranslationTableInfo() and the related
LookupAddresstoRootTable() in AARCH64's version of ArmMmuLib, add a
version of the former to CpuDxe, which will be its only remaining
user. While at it, simplify it a bit, since in the CpuDxe cases,
both OUT arguments are always provided.
Note that this removes the declaration of GetRootTranslationTableInfo()
as well, but this is a declaration that is private to CpuDxe, and it
really doesn't belong here in the first place. Since ArmMmuLib's version
of GetRootTranslationTableInfo() is going to be replaced shortly anyway,
don't bother moving this .h declaration elsewhere.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Currently, depending on the size of the region being (re)mapped, the
page table manipulation code may replace a table entry with a block entry,
even if the existing table entry uses different mapping attributes to
describe different parts of the region it covers. This is undesirable, and
instead, we should avoid doing so unless we are disregarding the original
attributes anyway. And if we make such a replacement, we should free all
the page tables that have become orphaned in the process.
So let's implement this, by taking the table entry path through the code
for block sized regions if a table entry already exists, and the clear
mask is set (which means we are preserving attributes from the existing
mapping). And when we do replace a table entry with a block entry, free
all the pages that are no longer referenced.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Given how the meaning of the attribute bits for page table entry types
is slightly awkward, and changes between levels, add some helpers to
abstract from this.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
FreePageTablesRecursive () traverses the page table tree depth first
to free all pages that it finds, without taking into account the
level at which it is operating.
Since TT_TYPE_TABLE_ENTRY aliases TT_TYPE_BLOCK_ENTRY_LEVEL3, we cannot
distinguish table entries from block entries unless we take the level
into account, and so we may be dereferencing garbage if we happen to
try and free a hierarchy of page tables that has level 3 pages in it.
Let's fix this by passing the level into FreePageTablesRecursive (),
and limit the recursion to levels < 3.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2574
The following components are currently missing from the [Components]
section of ArmPkg.dsc:
* ArmPkg/Drivers/ArmCrashDumpDxe/ArmCrashDumpDxe.inf
* ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
* ArmPkg/Library/ArmMtlNullLib/ArmMtlNullLib.inf
* ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
This commit includes the components in the package DSC build.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Because of a bug, current EL gets passed to DC IVAC instruction instead
of the VA entry that needs to be invalidated.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Some cosmetic fixups to the AArch64 MMU code:
- reflow overly long lines unless it hurts legibility
- add/remove whitespace according to the [de facto] coding style
- use camel case for goto labels
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307091008.14918-3-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This is the AARCH64 counterpart of commit 1f3b1eb308, to remove
a pointless check against the memory type of the allocations that the
page tables happened to land in. On ArmV8, we use writeback cacheable
exclusively for all memory.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307091008.14918-2-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
As it turns out, ARMv8 also permits accesses made with the MMU and
caches off to hit in the caches, so to ensure that any modifications
we make before enabling the MMU are visible afterwards as well, we
should invalidate page tables right after allocation like we do now on
ARM, if the MMU is still disabled at that point.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Message-Id: <20200307083849.8940-3-ard.biesheuvel@linaro.org>
Replace the slightly overcomplicated page table management code with
a simplified, recursive implementation that should be far easier to
reason about.
Note that, as a side effect, this extends the per-entry cache invalidation
that we do on page table entries to block and page entries, whereas the
previous change inadvertently only affected the creation of table entries.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307083849.8940-2-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
We already expect normal memory to be mapped writeback cacheable if
EDK2 itself is to make use of it, so doing an early sanity check on
the memory type of the allocation that the page tables happened to
land in isn't very useful. So let's drop it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The expression passed into ArmSetTTBR0 () in ArmConfigureMmu() is
sub-optimal at several levels:
- TranslationTable is already aligned, and if it wasn't, doing it
here wouldn't help
- TTBRAttributes is guaranteed not to have any bits set outside of
the 0x7f mask, so the mask operation is pointless as well,
- an additional (UINTN) cast for good measure is also not needed.
So simplify the expression.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
On ARMv7 and up, doing cache maintenance by set/way is only
permitted in the context of on/offlining a core, and any other
uses should be avoided. Add ASSERT()s in the right place to
ensure that any uses with the MMU enabled are caught in DEBUG
builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
ArmLib is a BASE type library, which should not depend or
even be aware on DXE type protocols. So drop the reference
to gEfiCpuArchProtocolGuid.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Suspiciously, ArmLib's INF does not contain a [LibraryClasses]
section at all, but it turns out that all the library includes
it contains (except for ArmLib.h itself) are actually bogus so
let's just drop all of them. While at it, replace <Uefi.h> with
the more accurate <Base.h> for a BASE type module, and put the
includes in a consistent order.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The clean/invalidate helper functions that operate on a single cache
line identified by set, way and level in a special, architected format
are only used by the implementations of the clean/invalidate routines
that operate on the entire cache hierarchy, as exposed by ArmLib.
The latter routines will be deprecated soon, so move the helpers out
of ArmLib.h and into a private header so they are safe from abuse.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the AARCH64 version of ArmMmuLib, we are currently relying on
set/way invalidation to ensure that the caches are in a consistent
state with respect to main memory once we turn the MMU on. Even if
set/way operations were the appropriate method to achieve this, doing
an invalidate-all first and then populating the page table entries
creates a window where page table entries could be loaded speculatively
into the caches before we modify them, and shadow the new values that
we write there.
So let's get rid of the blanket clean/invalidate operations, and
instead, update ArmUpdateTranslationTableEntry () to invalidate each
page table entry *after* it is written if the MMU is still disabled
at this point.
On ARMv8, it is guaranteed that memory accesses done by the page table
walker are cache coherent, and so we can ignore the case where the
MMU is on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the ARM version of ArmMmuLib, we are currently relying on set/way
invalidation to ensure that the caches are in a consistent state with
respect to main memory once we turn the MMU on. Even if set/way
operations were the appropriate method to achieve this, doing an
invalidate-all first and then populating the page table entries creates
a window where page table entries could be loaded speculatively into
the caches before we modify them, and shadow the new values that we
write there.
So let's get rid of the blanket clean/invalidate operations, and instead,
invalidate each page table right after allocating it, and each section
entry after it is updated (to address all the little corner cases that the
ARMv7 spec permits), and invalidate sets of level 2 entries in blocks,
using the generic invalidation routine from CacheMaintenanceLib
On ARMv7, cache maintenance may be required also when the MMU is
enabled, in case the page table walker is not cache coherent. However,
the code being updated here is guaranteed to run only when the MMU is
still off, and so we can disregard the case when the MMU and caches
are on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Instead of overallocating memory and align the resulting base address
manually, use the AllocateAlignedPages () helper, which achieves the
same, and might even manage that without leaking a chunk of memory of
the same size as the allocation itself.
While at it, fix up a variable declaration in the same hunk, and drop
a comment whose contents add nothing to the following line of code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the AArch64 implementation of ArmMmuLib, which combines the
initial page table population code with the code that runs at later
stages to manage permission attributes in the page tables, ARM uses
two completely separate sets of routines for this.
Since ArmMmuLib is a static library, we can prevent duplication of
this code between different users, which usually only need one or
the other. (Note that LTO should also achieve the same.)
This also makes it easier to reason about modifying the cache
maintenance handling, and replace the set/way ops with by-VA
ops, since the code that performs the set/way ops only executes
when the MMU is still off.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Make the CONSTRUCTOR define in the .INF AARCH64 only, so we can drop
the empty stub that exists for ARM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Commit 2fe25a74d6 ("ArmPkg/MmCommunicationDxe: relay architected PI
events to MM context") update the ARM specific standalone MM client
driver to register for certain events in the entrypoint code, but did
so in a way that makes the entrypoint always return with an error.
Instead, return EFI_SUCCESS if registering for those events succeeds,
and back out the registrations that did succeed if one fails, and
return an error.
Fixes: 2fe25a74d6 ("ArmPkg/MmCommunicationDxe: relay architected PI events to MM context")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
At the same time, the following three files had to undergo TAB expansion:
ArmPkg/Library/ArmSoftFloatLib/ArmSoftFloatLib.c
ArmPkg/Library/GccLto/liblto-aarch64.s
ArmPkg/Library/GccLto/liblto-arm.s
I used "expand -t 2", in order to stay close to the edk2 coding style
(which uses two spaces for indentation.)
Both the CRLF conversion and the TAB expansion are motivated by
"PatchCheck.py". "PatchCheck.py" is also the reason why CRLF conversion
and TAB expansion have to happen in the same patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib. Note that this means the hack to support warm
reboot by jumping to the SEC entry point with the MMU and caches off
is also no longer used, and can be removed as well, along with the PCD
PcdArmReenterPeiForCapsuleWarmReboot that was introduced for this
purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PI defines a few architected events that have significance in the MM
context as well as in the non-secure DXE context. So register notify
handlers for these events, and relay them into the standalone MM world.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Third party driver images loaded from Option ROM get queued
for execution after EndOfDxe. These queued images need to be
dispatched from the PlatformBootManagerLib.
Since the queued images were not dispatched, the PCI Option
ROM drivers were not getting loaded on Juno. Therefore,
add call to EfiBootManagerDispatchDeferredImages() for
dispatching deferred images from PlatformBootManagerLib.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
A paragraph sign in a comment came from some ISO8859 encoding,
convert it to the word "section" to remain 7-bit safe, since we're
not actually doing anything special.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
In commit 1fce963d89 we reduced the level of information printed
by PeCoffLoaderRelocateImageExtraAction() but we did not update the
similar PeCoffLoaderUnloadImageExtraAction() function.
PeCoffLoaderUnloadImageExtraAction() prints helpful debugger commands
for source level debugging. These messages should not be printed on the
EFI_D_ERROR level; they don't report errors. Change the debug level
(bitmask, actually) to DEBUG_LOAD | DEBUG_INFO, because the messages are
printed in relation to image loading, and they are informative.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Andrew Jones <drjones@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SERIAL_DXE_FILE_GUID is now defined in MdeModulePkg as
EDKII_SERIAL_PORT_LIB_VENDOR_GUID, simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-4-anthony.perard@citrix.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The upstream SoftFloat code that was recently incorporated into
ArmSoftFloatLib uses some parameterization to tweak the inlining
and optimization behavior for different compilers.
The custom platform.h file that sets these parameters is based on
the upstream version for Linux/ARM, but was updated to include the
'always_inline' GCC attribute into the INLINE macro, to ensure that
all definitions that are marked as inline are not only inlined into
their callers, but also to ensure that no version of the function is
ever emitted into the object file.
This works fine on recent GCC and Clang, but the latter part turns
out to break on GCC 4.x, resulting duplicate definition linker errors.
Fortunately, the synticatically more appriopriate 'static inline'
works fine on both the recent and the older compilers, so let's switch
to that instead.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clang 7 complains about the vmsr instruction in ArmV7Support.S,
which is only available on cores that implement some flavour of
VFP. So set the .fpu to NEON like we do in some other places.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that we have switched to a new version of the SoftFloat code,
remove the source files that make up the old implementation, and
are no longer referenced.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1845
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Update the INF description and the top level .c files in order to
switch to the new version of the SoftFloat library imported as a
Git submodule in the previous patch.
Note that we no longer use the code that travelled a long way from
the 2002 version of the softfloat library via NetBsd and the StdLib
package. Instead, we are using the upstream version unmodified, with
the glue .c file adopted from the OP-TEE project. This approach is
much cleaner and much more maintainable.
Note that support for the RVCT toolchains is being dropped at the same
time. RVCT is mostly untested, and planned to be removed, and so it
makes little sense to go to the trouble of upgrading this library for
RVCT as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1845
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In preparation of bringing ArmSoftFloatLib up to date in order
to provide some missing routines, import the Berkely SoftFloat
library into the tree as a git submodule.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1845
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The new sources are a copy of the RVCT version.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The new source is a port of the RVCT version.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We could have reused memmove.asm for ARM, but we would still need to add
an implemention for ARM64, so we use the same source for both archs.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
None of the .c/.h in Arm/ are used any more => remove them.
Also merge the CC flags for MSFT ARM and ARM64, since these are the
only archs we support for this package.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, we always invalidate the TLBs entirely after making
any modification to the page tables. Now that we have introduced
strict memory permissions in quite a number of places, such
modifications occur much more often, and it is better for performance
to flush only those TLB entries that are actually affected by
the changes.
At the same time, relax some system wide data synchronization barriers
to non-shared. When running in UEFI, we don't share virtual address
translations with other masters, unless we are running under virt, but
in that case, the host will upgrade them as appropriate (by setting
an override at EL2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmSetMemoryAttributes() still chokes in some cases, i.e., when the
length of the region exceeds 4 GB, the subtraction overflows, which
results in the region being misidentified as being 32-bit addressable.
Let's update the logic to trim the length to what we can address with
32 bits. This fixes the issue, and also deals with the issue where an
entire region is disregarded if part of it exceeds beyond what we can
map with 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ArmPkg/Include/IndustryStandard/ArmTrustZoneSmc.h contains definitions
contradicting the SMC Calling Convention (ARM DEN0028B).
It also has no users in public trees. So delete before it can cause
damage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 31f5388006 ("ArmPkg/DefaultExceptionHandlerLib: use console
if available") added calls to AsciiPrint() to the default exception
handler code, but the ARM version did not include UefiLib.h yet
(even though the .INF declares it unconditionally), resulting in
build breakage. So add the missing include.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Print the minimal 'exception occurred' message to the console as well
as to the serial port if the console is available. This makes such
messages visible on systems where the console is graphical and the
serial is not connected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Drop the redundant BASE variant, which is no longer used anywhere
now that DebugAgentSymbolsBaseLib no longer incorporates a vector
table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Declare that this library is only usable in the context of DXE core
or a DXE driver. Set the MODULE_TYPE to BASE: this only affects the
prototype of the constructor (if present) but doesn't actually
restrict the usage context otherwise.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DebugAgentSymbolsBaseLib is an optional library that is in charge
of extracting debug headers from SEC and PEI_CORE images in memory
so the filename and the offset in memory can be reported via the
UART, allowing a developer to load debugging symbols into his
debugger.
Interestingly enough, DebugAgentSymbolsBaseLib is also in charge of
exception handling before this duty is taken over by either the PEI
core, or the CPU DXE driver when running under PrePi.
Since exceptions are not actually handled at all on AArch64, and simply
routed to the DefaultExceptionHandlerLib (for which a special version
has been created to be usable this early), let's get rid of this
dubious functionality altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Take care not to dereference BlockEntry if it may be pointing past
the end of the page table we are manipulating. It is only a read,
and thus harmless, but HeapGuard triggers on it so let's fix it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ignore calls to ArmSetMemoryAttributes () when the region described
is outside of the 32-bit addressable range. This memory is not
mapped in the first place, and the current code does not deal with
the high bits correctly, resulting in hangs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PopulateLevel2PageTable () is invoked for [parts of] mappings that
start or end on a non-1 MB aligned address (or both). The size of
the mapping depends on both the start address modulo 1 MB and the
length of the mapping, but the logic that calculates this size is
flawed: subtracting 'start address modulo 1 MB' could result in a
negative value for the remaining length, which is obviously wrong.
So instead, take either RemainLength, or the rest of the 1 MB
block, whichever is smaller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Eugene Cohen <eugene@hp.com>
Commit 829633e3a8 ("ArmPkg/ArmMmuLib: Add new attribute
WRITE_BACK_NONSHAREABLE") introduced support for non-shareable
cached mappings to the AArch64 version of ArmMmuLib, but the ARM
version was left behind, so fix that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
We've removed BaseTools support for GCC44..GCC47. Drop
ArmPkg/ArmSoftFloatLib build flags that are specific to any of those gcc
versions. (See also commit 01627dba09, "ArmPkg/ArmSoftfloatLib: restrict
-fno-tree-vrp option to GCC46 and GCC47", 2015-12-15).
No GCC44..GCC47 references remain under ArmPkg after this patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of dropping PcdPrePiCpuMemorySize entirely, base the
maximum size of the identity map on the capabilities of the CPU.
Since that may exceed what is architecturally permitted when using
4 KB pages, take MAX_ADDRESS into account as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add a helper function that returns the maximum physical address space
size as supported by the current CPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
While this isn't the only Aarch64 directory in the tree, let's
keep from adding more of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmMmuStandaloneMmLib.inf cannot be built for ARM so move it to the
[Components.AARCH64] section in ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The last remaining users of the BdsLib.h header reside in the
edk2-platforms tree, and so it has been copied there. This
allows us to remove the original from ArmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Our poor man's implementation of EnterS3WithImmediateWake () currently
sets a high TPL level to disable interrupts, and simply calls the
PEI entrypoint again after disabling the MMU.
Unfortunately, this is not sufficient: DMA capable devices such as
network controllers or USB controllers may still be enabled and
writing to memory, e.g., in response to incoming network packets.
So instead, do the full ExitBootServices() dance: allocate space and
get the memory map, call ExitBootServices(), and in case it fails, get
the memory map again and call ExitBootServices() again. This ensures
that all cleanup related to DMA capable devices is performed before
doing the warm reset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Setting GICD_IROUTERn.IRM and GICD_IROUTERn.{Aff3,Aff2,Aff1,Aff0}
at the same time is nonsensical (see 8.9.13 in the GICv3 spec, which
says of GICD_IROUTERn.IRM that "When this bit is set to 1,
GICD_IROUTER<n>.{Aff3,Aff2,Aff1,Aff0} are UNKNOWN"). There is also no
guarantee that IRM is implemented (see GICD_TYPER.No1N which indicates
whether the implementation supports this or not).
Let's thus not set this bit, as we want all SPIs to be delivered to the
same CPU, and not be broadcast to all of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Updated Redistributor base calculation to allow for the fact that
GICv4 has 2 additional 64KB frames (for VLPI and a reserved frame).
The code now tests the VLPIS bit in the GIC Redistributor Type
Register (GICR_TYPER) and calculates the Redistributor granularity
accordingly.
The code changes are:
GICR_TYPER register fields, etc, added to the header.
Loop updated to pay attention to GICR_TYPER.Last.
Derive frame "stride" size from GICR_TYPER.VLPIS.
Note: The assumption is that the redistributors are adjacent for
all CPUs. However this may not be the case for NUMA systems.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the SBSA specification the Watchdog Compare
Register is split into two separate 32bit registers.
EDK2 code uses a single 64bit transaction to update
them, which can be problematic, depending on the SoC
implementation and could result in unpredictable behavior.
Fix this by modifying WatchdogWriteCompareRegister routine to
use two consecutive 32bit writes to the Watchdog Compare Register
Low and High, using new dedicated macros.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This is initial version of OP-TEE library that provides api's to
communicate with OP-TEE OS (Trusted OS based on ARM TrustZone) via
secure monitor calls. Currently it provides basic api to detect OP-TEE
presence via UID matching.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Dynamically allocate the buffer to receive the SCMI protocol list.
This makes MAX_PROTOCOLS redundant, so it is removed.
It also fixes one minor code alignment issue and removes an unused
macro PROTOCOL_MASK.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This change fixes a bug in the SCMI DXE which is observed with the
upcoming release of the SCP firmware.
The PROTOCOL_ID_MASK (0xF) which is used to generate an index in
the ProtocolInitFxns is wrong because protocol ids can be
anywhere in 0x10 - 15 or 0x80 - FF range. This mask generates
the same index for two different protocols e.g. for protocol ids
0x10 and 0x90, which causes duplicate initialization of a protocol
resulting in a failure.
This change removes the use of PROTOCOL_ID_MASK and instead
uses a list of protocol ids and their initialization functions
to identify a supported protocol and initialize it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Mva address calculation should use the left-shifted current
section index instead of the left-shifted table base address.
Using the table base address here has the side-effect of potentially
causing an access violation depending on the base address value.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Christopher Co <christopher.co@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Given that these days, our ARM port only supports ARMv7 and later, we
can assume that the page table walker's memory accesses are cache
coherent, and so there is no need to perform cache maintenance. It
does require the page tables themselves to reside in memory mapped as
writeback cacheable so ASSERT() that this is the case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Peculiarly enough, the current page table manipulation code takes it
upon itself to write back and invalidate the memory contents covered
by page and section mappings when their memory attributes change. It
is not generally the case that data must be written back when such a
change occurs, even when switching from cacheable to non-cacheable
attributes, and in some cases, it is actually causing problems. (The
cache maintenance is also performed on the PCIe MMIO regions as they
get mapped by the PCI bus driver, and under virtualization, each
cache maintenance operation on an emulated MMIO region triggers a
round trip to the host and back)
So let's just drop this code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Align the prototype of ArmMtlLib's MtlWaitUntilChannelFree () with the
one in the ArmMtlNullLib implementation (rather than the other way around,
since edk2-platforms has a conflicting implementation as well)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Enable to NOOPT build target so we can build this package with
optimizations disabled.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Implement ResetSystemLib's EnterS3WithImmediateWake() routine using
a jump back to the PEI entry point with interrupts and MMU+caches
disabled. This is only possible at boot time, when we are sure that
the current CPU is the only one up and running. Also, it depends on
the platform whether the PEI code is preserved in memory (it may be
copied to DRAM rather than execute in place), so also add a feature
PCD to selectively enable this feature.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
ARM platforms have no restriction on when a system firmware update
capsule can be applied, and so it is not necessary to call
ProcessCapsules() twice. So let's drop the first invocation that
occurs before EndOfDxe, and rewrite the second call so that all
capsule updates will be applied when the console is up and able to
provide progress feedback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
This was the warning (shown for __aeabi_memcpy, __aeabi_memcpy4 and
__aeabi_memcpy8):
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:42:6:
error: '__aeabi_memcpy8' alias between functions of incompatible types
'void(void*, const void *, size_t)'
{aka 'void(void *, const void *, unsigned int)'}
and 'void *(void *, const void *, size_t)'
{aka 'void *(void *, const void *, unsigned int)'} [-Werror=attribute-alias]
void __aeabi_memcpy8(void *dest, const void *src, size_t n);
ArmPkg/Library/CompilerIntrinsicsLib/memcpy.c:19:7: note: aliased declaration here
void *__memcpy(void *dest, const void *src, size_t n)
The problem is the different return type (void vs void*). So reshuffle
the code so the prototypes match between the aliases.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
[ardb: change prototype of internal __memcpy() and drop extra wrapper]
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
GCC8 reported it with the following warning:
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c: In function 'DisassembleArmInstruction':
ArmPkg/Library/ArmDisassemblerLib/ArmDisassembler.c:397:30: error: bitwise
comparison always evaluates to false [-Werror=tautological-compare]
if ((OpCode & 0x0db00000) == 0x03200000) {
This condition tries to be true for both the immediate and the register
version of the MSR instruction. They get identified inside the if-block
using the variable I, which contains the value of bit 25.
The problem with the comparison reported by GCC is that the
bitmask excludes bit 25, while the value requires it to be set to one:
0x0db00000: 0000 11011 0 11 00 00 0000 000000000000
0x03200000: 0000 00110 0 10 00 00 0000 000000000000
^
So the solution is to just don't require that bit to be set, because
it gets checked later using 'I', which results in the following value:
0x01200000: 0000 00010 0 10 00 00 0000 000000000000
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c, the following
functions:
WatchdogWriteOffsetRegister()
WatchdogWriteCompareRegister()
WatchdogEnable()
WatchdogDisable()
provide write access to ARM Generic Watchdog registers and use the values
returned by MmioWrite32() and MmioWrite64() as EFI_STATUS return codes.
Because MmioWriteXY() return the value passed as its write parameter,
Generic Watchdog access functions can spuriously return error codes which
are different from EFI_SUCCESS, e.g. the following call
Status = WatchdogWriteOffsetRegister (MAX_UINT32);
if (EFI_ERROR (Status)) {
return Status;
}
will return MAX_UINT32 defined in MdePkg/Include/Base.h as
#define MAX_UINT32 ((UINT32)0xFFFFFFFF)
This commit declares all the functions listed above as VOID
and removes the code for checking their return values.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alexei Fedorov <alexei.fedorov@arm.com>
Reviewed-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In preparation of selectively reinstating the timer enable quirk for Xen
that we removed in commit 411a373ed6 ("ArmPkg/TimerDxe: remove workaround
for KVM timer handling"), add a ArmGenericTimerReenableTimer() library
function to ArmGenericTimerCounterLib that we will populate for Xen only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.
Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.
Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Upcoming new component ArmPkg/Drivers/ArmScmiDxe is dependent on
platform specific ArmMtlLib library implementation, however in order
to be able to build the ArmScmiDxe component outside of the context of a
particular platform, this change adds Null implementation of the
ArmMtlLib along with ARM MTL library header.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When we first ported EDK2 to KVM/arm, we implemented a workaround for
the quirky timer handling on the KVM side. This has been fixed in
Linux commit f120cd6533d2 ("KVM: arm/arm64: timer: Allow the timer to
control the active state") dated 23 June 2014, which was incorporated
into Linux release 4.3.
So almost 4 years later, it should be safe to drop this workaround on
the EDK2 side.
This reverts commit b1a633434d.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 61a7b0ec63 ("ArmPkg/Gic: force GIC driver to run before CPU arch
protocol driver", 2018-02-06) explains why CpuDxe should be dispatched
after ArmGicDxe.
To implement the ordering, we should use a regular protocol depex rather
than the less flexible AFTER opcode. ArmGicDxe installs
gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid as one
of the last actions on its entry point stack; either of those is OK for
CpuDxe to wait for.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
"ArmGicDxe.inf" currently does not document how the protocols in the
[Protocols] section are used. Such comments help us analyze behavior, so
let's add them now.
- gHardwareInterruptProtocolGuid and gHardwareInterrupt2ProtocolGuid are
always produced on the InterruptDxeInitialize() -> (GicV2DxeInitialize()
| GicV3DxeInitialize()) -> InstallAndRegisterInterruptService() call
path.
- gEfiCpuArchProtocolGuid is consumed in the CpuArchEventProtocolNotify()
protocol notify callback. (Technically this is "conditional"; however
the firmware cannot work without architectural protocols, so we can call
it unconditional.)
While at it, drop the gArmGicDxeFileGuid comment from FILE_GUID; we're
going to make that GUID uninteresting soon.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
If timer interrupt is level sensitive, reloading timer compare
register has a side effect of clearing GIC pending status, so a "ISB"
is needed to make sure this instruction is executed before enabling
CPU IRQ, or else we may get spurious timer interrupts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Pierre Gondois
Quan Nguyen
Leif Lindholm
wenyi,xie via groups.io
Michael Kubacki
Ard Biesheuvel
Heyi Guo
Vijayenthiran Subramaniam
Ard Biesheuvel
Ashish Singhal
Laszlo Ersek
Sami Mujawar
Leif Lindholm
Philippe Mathieu-Daude
Antoine Cœur
Anthony PERARD
Liming Gao
Pete Batard
Zhichao Gao
Michael D Kinney
Bret Barkelew
Jeff Brasen
Sumit Garg
Achin Gupta
Sughosh Ganu
Ming Huang
Haojian Zhuang
Marcin Wojtas
Ruiyu Ni
chenc2
Girish Pathak
Chris Co
Michael Zimmermann
AlexeiFedorov
Heyi Guo