It will be changed to build with MdeModulePkg/BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NOTE: SetBootOrderFromQemu() interface is not changed.
But when the old IntelFrameworkModulePkg/BDS is no longer used in
OVMF and ArmVirtPkg, additional patch will be submitted to change
this interface to remove parameter BootOptionList.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
QemuNewBootOrderLib will be changed to work with MdeModulePkg/BDS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since PlatformBootManagerLib do not run memory test
to convert untested memory to tested.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
At the moment, the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is only installed if
S3 is enabled -- at the end of SaveS3BootScript().
While a runtime OS is never booted with SMM unlocked (because the SMM IPL
locks down SMM as a last resort:
> SMM IPL! DXE SMM Ready To Lock Protocol not installed before Ready To
> Boot signal
> SmmInstallProtocolInterface: [EfiSmmReadyToLockProtocol] 0
> Patch page table start ...
> Patch page table done!
> SMM IPL locked SMRAM window
), we shouldn't allow UEFI drivers and applications either to mess with
SMM just because S3 is disabled. So install
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL in PlatformBdsInit() unconditionally.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OVMF's PlatformBdsLib currently makes SMM vulnerable to the following
attack:
(1) a malicious guest OS copies a UEFI driver module to the EFI system
partition,
(2) the OS adds the driver as a Driver#### option, and references it from
DriverOrder,
(3) at next boot, the BdsEntry() function in
"IntelFrameworkModulePkg/Universal/BdsDxe/BdsEntry.c" processes
Driver#### and DriverOrder between the calls to PlatformBdsInit() and
PlatformBdsPolicyBehavior(),
(4) OVMF locks down SMM only in PlatformBdsPolicyBehavior(), hence the
driver runs with SMM unlocked.
The BdsEntry() function of the MdeModulePkg BDS driver (in file
"MdeModulePkg/Universal/BdsDxe/BdsEntry.c") recommends to "Signal
ReadyToLock event" in PlatformBootManagerBeforeConsole() -- which
corresponds to PlatformBdsInit() --, not in
PlatformBootManagerAfterConsole() -- which corresponds to
PlatformBdsPolicyBehavior().
Albeit an independent question, but it's worth mentioning: this patch also
brings OvmfPkg's PlatformBdsInit() closer to ArmVirtPkg's. Namely, the
latter signals End-of-Dxe in PlatformBdsInit() already.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
It would be possible to remove the UAF without local variables, by calling
SataPrivateData->PciIo->Attributes() before releasing SataPrivateData.
However, by keeping the location of the call (for which temporary
variables are necessary), we continue to match the error path logic in
SataControllerStart(), which is always recommended.
Reported-by: wang xiaofeng <winggundum82@163.com>
Fixes: bcab714134
Cc: wang xiaofeng <winggundum82@163.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
"ASSERT (SataPrivateData != NULL)" is just a few lines higher up.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
XenIoMmioLib depends on MemoryAllocationLib, and uses its header, but
failed to declare the dependency in its INF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This driver is now unused.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
It's been a month since the following commits appeared in the repo:
4014885ffd OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe
c47ed6fcb5 OvmfPkg: match PCI config access to machine type (if not
USE_OLD_PCI_HOST)
in which we introduced the USE_OLD_PCI_HOST fallback, and made other work
depend on it. I have not heard of any problems (primarily from the
vfio-users group that uses Gerd's daily / hourly OVMF builds), so it's
time to drop the fallback.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Build tested with GCC 5.3 on IA32 and X64. Boot tested to UEFI Shell
on IA32 and UEFI Linux on X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The same functional code has been in S3SaveStateDxe,
OVMF AcpiS3SaveDxe can be retired now.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Currently, the LockBox protocol is installed in entrypoint of
OVMF AcpiS3SaveDxe.
We can let the first driver run with LockBoxDxeLib linked to have its
library constructor to install LockBox protocol on the ImageHandle.
As other drivers may have gEfiLockBoxProtocolGuid dependency,
the first driver should run before them.
The later patches to retire AcpiS3SaveDxe for OVMF depends on this patch.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Also need to declare PcdAcpiS3Enable as DynamicDefault in *.dsc.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Edk2 commit 8a45f80eda ("MdeModulePkg: Make HII configuration settings
available to OS runtime") implements the optional UEFI feature described
in "31.2.11.1 OS Runtime Utilization" in UEFI v2.6.
While this feature might show benefits down the road even in QEMU virtual
machines, at the moment it only presents drawbacks:
- it increases the EfiRuntimeServicesData footprint,
- it triggers HII compatibility problems between edk2 and external drivers
unconditionally, even if the end-user is not interested in HII and/or in
configuring said drivers (see
<https://www.redhat.com/archives/vfio-users/2016-March/msg00153.html>
and <http://thread.gmane.org/gmane.comp.bios.edk2.devel/9894> for an
example).
While the feature was being introduced, popular demand for a controlling
Feature PCD rose (see
<http://thread.gmane.org/gmane.comp.bios.edk2.devel/7626>), which is why
we can set it now to FALSE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
PcdMaxHardwareErrorVariableSize sets the size limit for individual
Hardware Error Record Variables (see "7.2.3 Hardware Error Record
Persistence" and "Appendix P, Hardware Error Record Persistence Usage" in
the UEFI-2.6 spec).
Since Hardware Error Record Persistence is an optional firmware feature,
according to the spec, and OVMF does not enable it -- it inherits
PcdHwErrStorageSize and PcdHardwareErrorRecordLevel with zero values --,
the PcdMaxHardwareErrorVariableSize setting in our DSC files has no
effect. Remove it in order to eliminate future confusion.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/9743/focus=9780
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This driver implements the VIRTIO_DEVICE_PROTOCOL for non-transitional PCI
devices, based on the virtio-1.0 specification (csprd05). Non-transitional
means that it only binds QEMU's virtio-xxx-pci devices that receive the
",disable-legacy=on,disable-modern=off" properties on the QEMU command
line. These devices have distinct PCI Device IDs from those that are bound
by VirtioPciDeviceDxe.
The central abstraction of this driver is the VIRTIO_1_0_CONFIG type. It
is practically a "fat pointer" to a register block. The pointed-to
register block
- may or may not exist (the latter being mostly useful for virtio-1.0
devices that have no device-specific registers),
- lives in one of the device's BARs,
- lives in an IO or MMIO BAR,
- lives at an offset relative to the BAR start,
- has its size also maintained.
Such VIRTIO_1_0_CONFIG "fat pointers" (i.e., the locations of the register
blocks) are parsed from vendor capabilities that reside in the device's
standard PCI capabilities list (in PCI config space).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
In virtio-0.9.5, the size of the virtio-net packet header depends on
whether the VIRTIO_NET_F_MRG_RXBUF feature is negotiated -- the
"num_buffers" field is only appended to the header if the feature is
negotiated.
Since we never negotiate this feature, VirtioNetDxe never allocates room
for the "num_buffers" field.
With virtio-1.0, the "num_buffers" field is always there (although it
doesn't carry useful information without VIRTIO_NET_F_MRG_RXBUF). Adapt
the buffers that depend on the virtio-net header size (otherwise we have
skewed / truncated packets).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Relative to virtio-0.9.5, virtio-1.0 reverses the order of queue discovery
and feature negotiation. In virtio-1.0, feature negotiation has to
complete first, and the device can also reject a self-inconsistent feature
request through the new VSTAT_FEATURES_OK status bit. (For example if the
driver requests a higher level feature but clears a prerequisite feature.)
Furthermore, we retain the VIRTIO_F_VERSION_1 feature bit if the
VIRTIO_DEVICE_PROTOCOL provider has high enough revision.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In VirtIo 1.0, a device can reject a self-inconsistent feature bitmap
through the new VSTAT_FEATURES_OK status bit. (For example if the driver
requests a higher level feature but clears a prerequisite feature.) This
function is a small wrapper around
VIRTIO_DEVICE_PROTOCOL.SetGuestFeatures() that also verifies if the VirtIo
1.0 device accepts the feature bitmap.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These header files are intentionally minimal, and intentionally kept apart
from the VirtIo 0.9.5 headers.
The header inclusion chains end up like this (the Virtio10*.h header files
in the middle are new):
Virtio.h -> Virtio10.h -> Virtio095.h
^ ^
| |
VirtioNet.h -> Virtio10Net.h -> Virtio095Net.h
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
In the upcoming virtio-1.0 series, we'll introduce "Virtio10Net.h".
However, the "VirtioNet.h" header file should continue to expose the
Virtio Network Device specific type and macro definitions for all virtio
versions that OvmfPkg supports. Therefore extract "Virtio095Net.h" like
this:
VirtioNet.h -> Virtio095Net.h
so that in the upcoming patches, we can insert "Virtio10Net.h" in the
middle of the inclusion chain.
This follows the example of "Acpi.h" and "Pci.h" under
"MdePkg/Include/IndustryStandard".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the upcoming virtio-1.0 series, we'll introduce "Virtio10.h". However,
the "Virtio.h" header file should continue to expose the generic type and
macro definitions for all virtio versions that OvmfPkg supports. Therefore
extract "Virtio095.h" like this:
Virtio.h -> Virtio095.h
so that in the upcoming patches, we can insert "Virtio10.h" in the middle
of the inclusion chain.
This follows the example of "Acpi.h" and "Pci.h" under
"MdePkg/Include/IndustryStandard".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This too is in preparation for the following patches.
After this patch, all four drivers manage their feature bits with explicit
masking.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
VirtioBlkDxe only recognizes virtio-block feature bits that the device
offers non-negotiably. Nonetheless, in preparation for the following
patches, don't try to clear them even for simplicity.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In virtio-1.0, it is not enough to pass the base address of the virtio
queue to the hypervisor (as a frame number); instead it will want the
addresses of the descriptor table, the available ring, and the used ring
separately. Pass the VRING object to the SetQueueAddress() member
function; this will enable a virtio-1.0 implementation. Convert the
current producers and consumers to this prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This function was never consumed by drivers, and the current prototype is
unsupportable with virtio-1.0. Remove the function from the protocol
definition, and drop the current (unused) implementations.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The virtio-1.0 spec widens the Features bitmap to 64 bits. Modify the
declarations of the GetDeviceFeatures() and SetGuestFeatures() protocol
member functions accordingly.
Normally, a protocol cannot be changed in incompatible ways if the GUID
stays the same; however, we've always been extremely clear that
VIRTIO_DEVICE_PROTOCOL is internal to edk2. See for example the top of
"OvmfPkg/Include/Protocol/VirtioDevice.h".
In this patch, all producers and consumers of the GetDeviceFeatures() and
SetGuestFeatures() protocol members are updated.
The drivers that currently produce these members are "legacy" drivers (in
virtio-1.0 terminology), and they cannot (and will not) handle feature
bits above BIT31. Therefore their conversion is only for compatibility
with the modified protocol interface. The consumers will be responsible
for checking the VIRTIO_DEVICE_PROTOCOL.Revision field, and for not
passing feature bits that these backends cannot handle.
The VirtioMmioGetDeviceFeatures() implementation stores the result of an
MmioRead32() call with normal assignment, so it needs no change beyond
adapting its prototype.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Currently booting off of a RAM disk is not supported by
IntelFrameWorkModulePkg BDS, however on systems without writable
disks, the RAM disk can be made useful when loading raw HDD images
into it -- specially the ones with a FAT32 partition on which files
can be natively accessed by system firmware.
This patch adds RamDiskDxe driver by default in OVMF platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <paulo.alc.cavalcanti@hp.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
During real world testing I was getting an error with too many entries
in db: On my Secure boot laptop, I currently have seven certificates:
two Microsoft ones, Three Kernel ones from various distributions, my
own Secure Key and a temporary test key. That gives a total EFI
Signature List size of 8317 which is over the 0x2000 maximum.
Fix this by setting the PcdMaxAuthVariableSize to 0x2800 (10K) which
isn't much of an increase but allows for 9-10 certificates.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
On the normal boot path (which is when PciHostBridgeDxe runs), the PCDs
have been calculated; report the 64-bit PCI host aperture to
PciHostBridgeDxe.
In the Ia32 build, the PCD values (zeros) come directly from the DEC file,
and this patch makes no difference.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The main observation about the 64-bit PCI host aperture is that it is the
highest part of the useful address space. It impacts the top of the GCD
memory space map, and, consequently, our maximum address width calculation
for the CPU HOB too.
Thus, modify the GetFirstNonAddress() function to consider the following
areas above the high RAM, while calculating the first non-address (i.e.,
the highest inclusive address, plus one):
- the memory hotplug area (optional, the size comes from QEMU),
- the 64-bit PCI host aperture (we set a default size).
While computing the first non-address, capture the base and the size of
the 64-bit PCI host aperture at once in PCDs, since they are natural parts
of the calculation.
(Similarly to how PcdPciMmio32* are not rewritten on the S3 resume path
(see the InitializePlatform() -> MemMapInitialization() condition), nor
are PcdPciMmio64*. Only the core PciHostBridgeDxe driver consumes them,
through our PciHostBridgeLib instance.)
Set 32GB as the default size for the aperture. Issue#59 mentions the
NVIDIA Tesla K80 as an assignable device. According to nvidia.com, these
cards may have 24GB of memory (probably 16GB + 8GB BARs).
As a strictly experimental feature, the user can specify the size of the
aperture (in MB) as well, with the QEMU option
-fw_cfg name=opt/ovmf/X-PciMmio64Mb,string=65536
The "X-" prefix follows the QEMU tradition (spelled "x-" there), meaning
that the property is experimental, unstable, and might go away any time.
Gerd has proposed heuristics for sizing the aperture automatically (based
on 1GB page support and PCPU address width), but such should be delayed to
a later patch (which may very well back out "X-PciMmio64Mb" then).
For "everyday" guests, the 32GB default for the aperture size shouldn't
impact the PEI memory demand (the size of the page tables that the DXE IPL
PEIM builds). Namely, we've never reported narrower than 36-bit addresses;
the DXE IPL PEIM has always built page tables for 64GB at least.
For the aperture to bump the address width above 36 bits, either the guest
must have quite a bit of memory itself (in which case the additional PEI
memory demand shouldn't matter), or the user must specify a large aperture
manually with "X-PciMmio64Mb" (and then he or she is also responsible for
giving enough RAM to the VM, to satisfy the PEI memory demand).
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Ref: http://www.nvidia.com/object/tesla-servers.html
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Factor out the expression that is currently the basis of the address width
calculation into a standalone function. In the next patches we'll raise
the return value under certain circumstances.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Thomas Lamprecht <t.lamprecht@proxmox.com>
Ref: https://github.com/tianocore/edk2/issues/59
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that the previous patches ensure that we can access all PCI devices in
AcpiPlatformDxe, we can enable IO and MMIO decoding for all of them while
we contact QEMU for the ACPI tables. See more details in the patch titled:
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
In particular, this patch will prevent the bug when the 64-bit MMIO
aperture is completely missing from QEMU's _CRS, and consequently Linux
rejects 64-bit BARs with the error message
pci 0000:00:03.0: can't claim BAR 4 [mem 0x800000000-0x8007fffff 64bit
pref]: no compatible bridge window
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch doesn't change the behavior of AcpiPlatformDxe when
PcdPciDisableBusEnumeration is TRUE -- that is, when the driver runs on
Xen (OvmfPkg and ArmVirtPkg both), or when the driver runs on QEMU as part
of ArmVirtPkg but no PCI host bridge was found by VirtFdtDxe. In these
cases the driver continues to install the ACPI tables immediately.
However, when PcdPciDisableBusEnumeration is FALSE (i.e., when the driver
runs on QEMU as part of OVMF, or as part of ArmVirtPkg and VirtFdtDxe
finds a PCI host bridge), we now delay the ACPI table download from QEMU.
We wait until the Platform BDS tells us that root bridges have been
connected, and PciIo instances are available.
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The explanation is in the patch titled
OvmfPkg: introduce gRootBridgesConnectedEventGroupGuid
At this point, this signal doesn't do anything yet.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
QEMU's ACPI table generator can only create meaningful _CRS objects --
apertures -- for the root buses if all of the PCI devices behind those
buses are actively decoding their IO and MMIO resources, at the time of
the firmware fetching the "etc/table-loader" fw_cfg file. This is not a
QEMU error; QEMU follows the definition of BARs (which are meaningless
when decoding is disabled).
Currently we hook up AcpiPlatformDxe to the PCI Bus driver's
gEfiPciEnumerationCompleteProtocolGuid cue. Unfortunately, when the PCI
Bus driver installs this protocol, it's *still* not the right time for
fetching "etc/table-loader": although resources have been allocated and
BARs have been programmed with them, the PCI Bus driver has also cleared
IO and MMIO decoding in the command registers of the devices.
Furthermore, we couldn't reenable IO and MMIO decoding temporarily in our
gEfiPciEnumerationCompleteProtocolGuid callback even if we wanted to,
because at that time the PCI Bus driver has not produced PciIo instances
yet.
Our Platform BDSes are responsible for connecting the root bridges, hence
they know exactly when the PciIo instances become available -- not when
PCI enumeration completes (signaled by the above protocol), but when the
ConnectController() calls return.
This is when our Platform BDSes should explicitly cue in AcpiPlatformDxe.
Then AcpiPlatformDxe can temporarily enable IO and MMIO decoding for all
devices, while it contacts QEMU for the ACPI payload.
This patch introduces the event group GUID that we'll use for unleashing
AcpiPlatformDxe from our Platform BDSes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We'll need more room in the next patch. No functional changes.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
VS2008 seems to think that the "PciExBarBase" variable (introduced in
commit 7b8fe63561) can be evaluated for the
AddReservedMemoryBaseSizeHob() function call with its value being
uninitialized / indeterminate. This is not the case (see
"mHostBridgeDevId"); suppress the warning.
Reported-by: David Woodhouse <dwmw2@infradead.org>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/8871/focus=9431
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Current implementation only supports legacy region of 440 chip.
When QEMU is launched in Q35 mode using CSM enabled OVMF image,
LegacyBios driver fails to start due to the legacy region
[0xC0000, 0xFFFFF] cannot be written.
v2:
* just updates the comments.
v3:
* uses PcdOvmfHostBridgePciDevId as Jordan suggested.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Justen Jordan <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
By now OVMF makes MdeModulePkg/Bus/Pci/PciHostBridgeDxe go through
MMCONFIG (when running on Q35). Enable the driver to address each B/D/F's
config space up to and including offset 0xFFF.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
If USE_OLD_PCI_HOST is FALSE, then we switch all executable module types
supported by DxePciLibI440FxQ35 to the following library instance stack:
BasePciSegmentLibPci [class: PciSegmentLib]
DxePciLibI440FxQ35 [class: PciLib]
BasePciCf8Lib [class: PciCf8Lib]
BasePciExpressLib [class: PciExpressLib]
Every module will select 0xCF8 vs. ECAM based on the OVMF platform type
(i440fx or Q35). Notably, MdeModulePkg/Bus/Pci/PciHostBridgeDxe is among
the affected drivers.
The BasePciExpressLib instance is where the PcdPciExpressBaseAddress PCD
fills its original role.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
This library is a trivial unification of the following two PciLib
instances (and the result is easily diffable against each):
- MdePkg/Library/BasePciLibCf8
- MdePkg/Library/BasePciLibPciExpress
The PCI config access method is determined in the constructor function,
from the dynamic PCD "PcdOvmfHostBridgePciDevId" that is set by
PlatformPei.
The library instance is usable in DXE phase or later modules: the PciLib
instances being unified have no firmware phase / client module type
restrictions, and here the only PCD access is made in the constructor
function. That is, even before a given client executable's entry point is
invoked.
The library instance depends on PlatformPei both for setting the PCD
mentioned above, and also for enabling MMCONFIG on Q35. PEI and earlier
phase modules are not expected to need extended config access even on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
The comments in the code should speak for themselves; here we note only
two facts:
- The PCI config space writes (to the PCIEXBAR register) are performed
using the 0xCF8 / 0xCFC IO ports, by virtue of PciLib being resolved to
BasePciLibCf8. (This library resolution will permanently remain in place
for the PEI phase.)
- Since PCIEXBAR counts as a chipset register, it is the responsibility of
the firmware to reprogram it at S3 resume. Therefore
PciExBarInitialization() is called regardless of the boot path. (Marcel
recently posted patches for SeaBIOS that implement this.)
This patch suffices to enable PCIEXBAR (and the dependent ACPI table
generation in QEMU), for the sake of "PCIeHotplug" in the Linux guest:
ACPI: MCFG 0x000000007E17F000 00003C
(v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff]
(base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
acpi PNP0A08:00: _OSC: OS supports
[ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls
[PCIeHotplug PME AER PCIeCapability]
In the following patches, we'll equip the core PCI host bridge / root
bridge driver and the rest of DXE as well to utilize ECAM on Q35.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/10548
Suggested-by: Marcel Apfelbaum <marcel@redhat.com>
Reported-by: Micha Zegan <webczat_200@poczta.onet.pl>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gerd has advised us that long term support Q35 machine types have no low
RAM above 2GB, hence we should utilize the [2GB, 3GB) gap -- that we
currently leave unused -- for MMIO. (Plus, later in this series, for the
PCIEXBAR too.)
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/8707/focus=8817
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Section 5.1.16 ("PCIEXBAR -- PCI Express Register Range Base Address") in
Intel document #316966-002 (already referenced near the top of this header
file) describes the Q35 DRAM Controller register that configures the
memory-mapped PCI config space (also known as MMCONFIG, and ECAM /
Enhanced Configuration Access Method).
In this patch we add the macros we'll need later. We'll only support the
256 MB memory-mapped config space -- enough for buses [0, 255].
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Micha Zegan <webczat_200@poczta.onet.pl>
Ref: https://github.com/tianocore/edk2/issues/32
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Micha Zegan <webczat_200@poczta.onet.pl>
Enable the network2 commands when NETWORK_IP6_ENABLE is TRUE, so we
would have Ping6 and Ifconfig6.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
[lersek@redhat.com: added the word "Shell" to the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/IoFifo.asm to X64/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IoFifo.asm to Ia32/IoFifo.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The old driver is retained for now; it remains available with "-D
USE_OLD_PCI_HOST". This is because I'd like to involve end users and
downstreams in testing the new drier, but also allow them to switch back
to the old driver at the first sight of trouble, while we debug the new
driver in parallel.
In a few weeks the ifdeffery and the "OvmfPkg/PciHostBridgeDxe/" driver
should be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the next patch we'll build "MdeModulePkg/Bus/Pci/PciHostBridgeDxe".
That driver depends on the PciSegmentLib class. Edk2 offers four
instances:
(1) MdePkg/Library/UefiPciSegmentLibPciRootBridgeIo/
Inappropriate here because it consumes
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL, but
"MdeModulePkg/Bus/Pci/PciHostBridgeDxe" needs the library class for
producing that protocol.
(2) MdePkg/Library/PeiPciSegmentLibPciCfg2/
Restricted to PEIM, SEC, and PEI_CORE client modules.
(3) MdePkg/Library/DxePciSegmentLibEsal/
"uses ESAL services to perform PCI Configuration cycles"
(4) MdePkg/Library/BasePciSegmentLibPci/
A simple BASE library instance that sits on top of PciLib. This is our
choice. We can resolve PciSegmentLib to this instance for all module
types.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We copy the code from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c], with a slight change: the
device path is allocated separately now.
This is the final field to initialize in PCI_ROOT_BRIDGE.
The type EFI_PCI_ROOT_BRIDGE_DEVICE_PATH is renamed to
OVMF_PCI_ROOT_BRIDGE_DEVICE_PATH. The original is a misnomer (it is not a
standard UEFI type) that dates back to PcAtChipsetPkg/PciHostBridgeDxe.
Simply removing the EFI_ suffix would result in
PCI_ROOT_BRIDGE_DEVICE_PATH, where PCI_ could incorrectly suggest a
relation with the PCI standards or the PCI-related generic edk2 code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In "OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", the
RootBridgeIoCheckParameter() function hard-codes the maximum offset for
the PCI config space as 0xFF (see the MAX_PCI_REG_ADDRESS macro), which
matches OVMF's 0xCF8 / 0xCFC config access method.
The "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" driver abstracts away config
space access via the PciSegmentLib class, so it has to be informed
separately about the config space size.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The bus aperture is copied verbatim from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c].
The IO and 32-bit MMIO apertures are matched to PlatformPei's settings.
PciHostBridgeLibDxe expects PciHostBridgeLib instances to advertize the
exact apertures.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
InitRootBridge() in "OvmfPkg/PciHostBridgeDxe/PciHostBridge.c" passes the
EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM allocation attribute to
RootBridgeConstructor(); we should do the same here.
From "MdePkg/Include/Protocol/PciHostBridgeResourceAllocation.h":
/// If this bit is set, then the PCI Root Bridge does not support separate
/// windows for Non-prefetchable and Prefetchable memory. A PCI bus driver
/// needs to include requests for Prefetchable memory in the
/// Non-prefetchable memory pool.
Which implies that both the 32-bit and 64-bit prefetchable MMIO apertures
should be marked empty. (The CreateRootBridge() function actually enforces
this in "MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c".)
Furthermore, since OvmfPkg/PciHostBridgeDxe does *not* set the
EFI_PCI_HOST_BRIDGE_MEM64_DECODE allocation attribute:
/// If this bit is set, then the PCI Root Bridge supports 64 bit memory
/// windows. If this bit is not set, the PCI bus driver needs to include
/// requests for 64 bit memory address in the corresponding 32 bit memory
/// pool.
we follow suit in the PciHostBridgeLib instance.
In turn, the 64-bit MMIO apertures (both prefetchable and
non-prefetchable) should be marked empty.
MdeModulePkg/Bus/Pci/PciHostBridgeDxe enforces this too.
(64-bit MMIO aperture support, based on yet more fw_cfg files, is a
planned future improvement.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When this BOOLEAN member is FALSE, and the caller tries to set up a DMA
transfer between a PCI device and a host buffer not entirely under 4GB,
then "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" sets up a bounce buffer under
4GB, in the implementation of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Map().
Since that's exactly what RootBridgeIoMap() does in
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", stick with it in this
conversion.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These settings are copied from the RootBridgeConstructor() function, file
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This is the first of the patches that set the fields of PCI_ROOT_BRIDGE.
The structure is zero-filled as a precaution for later field additions.
Here we set the Segment member explicitly to zero (so that any later
customization can be easier).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This function has no counterpart in OvmfPkg/PciHostBridgeDxe/, but the
PciHostBridgeLib class requires it.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we import the scan for extra root buses from the
InitializePciHostBridge() function, in file
"OvmfPkg/PciHostBridgeDxe/PciHostBridge.c".
For the time being, the InitRootBridge() and UninitRootBridge() functions
are just placeholders.
The PciHostBridgeGetRootBridges() API expects us to return the
PCI_ROOT_BRIDGE structures in a contiguous array, instead of a linked
list. Therefore the following bits have to be converted manually:
(1) The array is allocated in advance, in a single step.
(2) The calculation of the array size depends on an explicit
multiplication, which we must check against overflow. Since more than
255 extra root bridges make no sense anyway, we use (1 + 255) as the
limit on the main plus all extra root bridges. This also ensures that
the UINTN multiplication doesn't overflow.
(3) The PciHostBridgeDxe code decrements "ExtraRootBridgesLeft" to
terminate the scanning early. Here we need track the increasing count
of used array elements as well, so we employ "ExtraRootBridges" as a
constant limit, and increment the new local variable "Initialized".
(4) The prototypes of InitRootBridge() and UninitRootBridge() reflect that
the PCI_ROOT_BRIDGE structure is allocated by the caller; only
in-place initialization is necessary.
Additionally, macros are employed for standard PCI quantities, from
"MdePkg/Include/IndustryStandard/Pci22.h":
- MAX_PCI_DEVICE_NUMBER (31) is replaced with PCI_MAX_DEVICE (same),
- the constant 255 is replaced with PCI_MAX_BUS,
- the (RootBridgeNumber < 256) condition is replaced with
(RootBridgeNumber <= PCI_MAX_BUS).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In this patch we clone "MdeModulePkg/Library/PciHostBridgeLibNull" for
customization under OvmfPkg. Differences relative to a verbatim copy:
- the Null suffix is dropped from file names,
- the UNI file is dropped, together with the corresponding MODULE_UNI_FILE
reference in the INF file,
- the INF file receives a new FILE_GUID,
- the top comments in the files mention OVMF, not a null instance.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Going forward, two modules will need to know about the aperture:
PlatformPei (as before), and OVMF's upcoming PciHostBridgeLib instance
(because the core PciHostBridgeDxe driver requires the library to state
the exact apertures for all root bridges).
On QEMU, all root bridges share the same MMIO aperture, hence one pair of
PCDs suffices.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At the moment we don't intend to customize this aperture at runtime, but
going forward, two modules will need to know about it: PlatformPei (as
before), and OVMF's upcoming PciHostBridgeLib instance (because the core
PciHostBridgeDxe driver requires the library to state the exact apertures
for all root bridges).
On QEMU, all root bridges share the same IO port aperture, hence one pair
of PCDs suffices.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At the location of this header an earlier [PcdsFixedAtBuild] section is in
effect already.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc file of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This adds the new Virtio-RNG DXE module to all three builds of
OvmfPkg. Note that QEMU needs to be invoked with the 'device
virtio-rng-pci' option in order for this device to be exposed to
the guest.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This implements a UEFI driver model driver for Virtio devices of type
VIRTIO_SUBSYSTEM_ENTROPY_SOURCE, and exposes them via instances of
the EFI_RNG_PROTOCOL protocol, supporting the EFI_RNG_ALGORITHM_RAW
algorithm only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VirtioLib provides an API for simple, synchronous (request/response-style)
virtio communication. The guest driver builds one descriptor chain, link
for link, with VirtioPrepare() and VirtioAppendDesc(), then submits the
chain, and awaits the processing, with VirtioFlush().
The descriptor chain is always built at the beginning of the descriptor
area, with the head descriptor having descriptor index 0.
In order to submit the descriptor chain to the host, the guest always
pushes a new "available element" to the Available Ring, in genuine
queue-like fashion, with the new element referencing the head descriptor
(which always has index 0, see above).
In turn, after processing, the host always pushes a new "used element" to
the Used Ring, in genuine queue-like fashion, with the new element
referencing the head descriptor of the chain that was just processed. The
same element also reports the number of bytes that the host wrote,
consecutively across the host-writeable buffers that were linked by the
descriptors.
(See "OvmfPkg/VirtioNetDxe/TechNotes.txt" for a diagram about the
descriptor area and the rings.)
Because at most one descriptor chain can be in flight with VirtioLib at
any time,
- the Available Ring and the Used Ring proceed in lock-step,
- and the head descriptor that the new "available" and "used" elements can
ever reference has index 0.
Based on the above, we can modify VirtioFlush() to return the number of
bytes written by the host across the descriptor chain. The virtio-block
and virtio-scsi drivers don't care (they have other ways to parse the data
produced by the host), while the virtio-net driver doesn't use
VirtioFlush() at all (it employs VirtioLib only to set up its rings).
However, the virtio entropy device, to be covered in the upcoming
patches, reports the amount of randomness produced by the host only
through this quantity.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Before the merger of the authenticated and non-authenticated variable
drivers (commit fa0737a839), we had to match the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc" to SECURE_BOOT_ENABLE, because the opposite
GUID would cause either driver to fail an assertion. The header structures
for individual variables residing in the varstore were different
(VARIABLE_HEADER vs. AUTHENTICATED_VARIABLE_HEADER), and each driver could
only handle its own, so this GUID enforcement was necessary.
Since the unification of the variable driver however, it treats (a)
variable store format, and (b) AuthVariableLib instance as independent
characteristics; it can always manipulate variable stores with both header
types. All variations boot now; the difference is whether authenticated
variables, and special variables computed from them (like SecureBoot) are
supported at runtime:
variable store non-auth auth and SB
header GUID AuthVariableLib variables variables
-- --------------------- ------------------- -> --------- -----------
1 Variable SecurityPkg/... supported unsupported
2 Variable AuthVariableLibNull supported unsupported
3 AuthenticatedVariable SecurityPkg/... supported supported
4 AuthenticatedVariable AuthVariableLibNull supported unsupported
At the moment, SECURE_BOOT_ENABLE selects between cases #2 (FALSE) and #3
(TRUE). That is, it controls both the varstore header GUID in
"OvmfPkg/VarStore.fdf.inc", and the AuthVariableLib resolution in the DSC
files.
Exploiting the unified driver's flexibility, we can simplify
"OvmfPkg/VarStore.fdf.inc" by picking the AuthenticatedVariable GUID as a
constant, and letting SECURE_BOOT_ENABLE control only the AuthVariableLib
resolution. This amounts to SECURE_BOOT_ENABLE choosing between cases #3
(TRUE) and #4 (FALSE), with identical results as before.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/7319/focus=7344
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
QEMU emulates NVMe. NvmExpressDxe seems to work well with it. The relevant
QEMU options are
-drive id=drive0,if=none,format=FORMAT,file=PATHNAME \
-device nvme,drive=drive0,serial=SERIAL
where the required SERIAL value sets the Serial Number (SN) field of the
"Identify Controller Data Structure". It is an ASCII string with up to 20
characters, which QEMU pads with spaces to maximum length.
(Refer to "NVME_ADMIN_CONTROLLER_DATA.Sn" in
"MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressHci.h".)
Cc: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reference: https://github.com/tianocore/edk2/issues/48
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Vladislav Vovchenko <vladislav.vovchenko@sk.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19791 6f19259b-4bc3-4df7-8a09-765794883524
Change the image verification policy for option ROM images to 0x00
(ALWAYS_EXECUTE).
While this may not be a good idea for physical platforms (see e.g.
<https://trmm.net/Thunderstrike>), on the QEMU platform the benefits seem
to outweigh the drawbacks:
- For QEMU's virtual PCI devices, and for some assigned PCI devices, the
option ROMs come from host-side files, which can never be rewritten from
within the guest. Since the host admin has full control over a guest
anyway, executing option ROMs that originate from host-side files
presents no additional threat to the guest.
- For assigned physical PCI devices with option ROMs, the argument is not
so clear-cut. In theory a setup could exist where:
- the host-side UEFI firmware (with DENY_EXECUTE_ON_SECURITY_VIOLATION)
rejects the option ROM of a malicious physical PCI device, but
- when the device is assigned to the guest, OVMF executes the option ROM
in the guest,
- the option ROM breaks out of the guest (using an assumed QEMU
vulnerability) and gains QEMU user privileges on the host.
However, in order to escalate as far as it would happen on the bare
metal with ALWAYS_EXECUTE (i.e., in order to gain firmware-level access
on the host), the malicious option ROM would have to break through (1)
QEMU, (2) traditional UID and GID based privilege separation on the
host, (3) sVirt (SELinux) on the host, (4) the host OS - host firmware
boundary. This is not impossible, but not likely enough to discourage
the use cases below.
- This patch makes it possible to use unsigned iPXE network drivers that
QEMU presents in the option ROMs of virtual NICs and assigned SR-IOV
VFs, even if Secure Boot is in User Mode or Deployed Mode.
- The change also makes it possible to execute unsigned, outdated
(revoked), or downright malicious option ROMs of assigned physical
devices in guests, for corporate, entertainment, academia, or security
research purposes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19614 6f19259b-4bc3-4df7-8a09-765794883524
Secure Boot support was originally addded to OvmfPkg on 2012-Mar-09, in
SVN r13093 (git 8cee3de7e9), titled
OvmfPkg: Enable secure-boot support when SECURE_BOOT_ENABLE==TRUE
At that time the image verification policies in
SecurityPkg/SecurityPkg.dec were:
- option ROM image: 0x00 (ALWAYS_EXECUTE)
- removable media image: 0x05 (QUERY_USER_ON_SECURITY_VIOLATION)
- fixed media image: 0x05 (QUERY_USER_ON_SECURITY_VIOLATION)
The author of SVN r13093 apparently didn't want to depend on the
SecurityPkg defaults for the latter two image origins, plus the
ALWAYS_EXECUTE policy for option ROM images must have been deemed too lax.
For this reason SVN r13093 immediately spelled out 0x05
(QUERY_USER_ON_SECURITY_VIOLATION) within OvmfPkg for all three image
origins.
Fast forward to 2013-Aug-28: policy 0x05
(QUERY_USER_ON_SECURITY_VIOLATION) had been forbidden in the UEFI spec,
and SVN r14607 (git db44ea6c4e) reflected this in the source code:
- The policies for the latter two image origins were switched from 0x05 to
0x04 (DENY_EXECUTE_ON_SECURITY_VIOLATION) in SecurityPkg,
- the patch changed the default policy for option ROM images too, from
0x00 (ALWAYS_EXECUTE) to 0x04 (DENY_EXECUTE_ON_SECURITY_VIOLATION),
- any other client DSC files, including OvmfPkg's, underwent a whole-sale
0x05 (QUERY_USER_ON_SECURITY_VIOLATION) -> 0x04
(DENY_EXECUTE_ON_SECURITY_VIOLATION) replacement too.
The practical result of that patch for OvmfPkg was that the explicit 0x04
settings would equal the strict SecurityPkg defaults exactly.
And that's what we have today: the "override the default values from
SecurityPkg" comments in OvmfPkg's DSC files are stale, in practice.
It is extremely unlikely that SecurityPkg would change the defaults from
0x04 (DENY_EXECUTE_ON_SECURITY_VIOLATION) any time in the future, so let's
just inherit those in OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19613 6f19259b-4bc3-4df7-8a09-765794883524
GCC_ASM_EXPORT() not only exports a symbol as a function, it also emits
a .type <xxx>, %function directive, which is used by the ARM linker to
decide whether to emit interworking branches. So replace the explicit
.global with GCC_ASM_EXPORT(), or the code will not be callable from
Thumb-2 code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19329 6f19259b-4bc3-4df7-8a09-765794883524
warning C4459: declaration of 'xs' hides global declaration.
Update code to rename local variable xs to xsp to be different.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19116 6f19259b-4bc3-4df7-8a09-765794883524
At the moment, the "UefiCpuPkg/Universal/Acpi/S3Resume2Pei" module doesn't
support S3 resume if the platform has SMM enabled and the PEI phase is
built for X64. We document this in the README, but it is not conspicuous
enough.
Replace the "fine print" in the README with a runtime check in
PlatformPei.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19070 6f19259b-4bc3-4df7-8a09-765794883524
When -D SMM_REQUIRE is given, replace both
- OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf and
- OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
with
- OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesSmm.inf.
The outermost (= runtime DXE driver) VariableSmmRuntimeDxe enters SMM, and
the rest:
- the privileged half of the variable driver, VariableSmm,
- the fault tolerant write driver, FaultTolerantWriteSmm,
- and the FVB driver, FvbServicesSmm,
work in SMM purely.
We also resolve the BaseCryptLib class for DXE_SMM_DRIVER modules, for the
authenticated VariableSmm driver's sake.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19065 6f19259b-4bc3-4df7-8a09-765794883524
The following modules constitute the variable driver stack:
- QemuFlashFvbServicesRuntimeDxe and EmuVariableFvbRuntimeDxe, runtime
alternatives for providing the Firmware Volume Block(2) Protocol,
dependent on qemu pflash presence,
- FaultTolerantWriteDxe, providing the Fault Tolerant Write Protocol,
- MdeModulePkg/Universal/Variable/RuntimeDxe, independently of
-D SECURE_BOOT_ENABLE, providing the Variable and Variable Write
Architectural Protocols.
Let's move these drivers closer to each other in the DSC and FDF files, so
that we can switch the variable driver stack to SMM with more local
changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19064 6f19259b-4bc3-4df7-8a09-765794883524
When the user requires "security" by passing -D SMM_REQUIRE, and
consequently by setting PcdSmmSmramRequire, enforce flash-based variables.
Furthermore, add two ASSERT()s to catch if the wrong module were pulled
into the build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19063 6f19259b-4bc3-4df7-8a09-765794883524
At this point we can enable building PiSmmCpuDxeSmm.
CPU specific features, like SMRR detection, and functions that are used to
initialize SMM and process SMIs, are abstracted through the
SmmCpuFeaturesLib class for the PiSmmCpuDxeSmm module. Resolve it to our
own implementation under OvmfPkg -- it allows PiSmmCpuDxeSmm to work with
QEMU's and KVM's 64-bit state save map format, which follows the
definition from AMD's programmer manual.
SmmCpuPlatformHookLib provides platform specific functions that are used
to initialize SMM and process SMIs. Resolve it to the one Null instance
provided by UefiCpuPkg, which is expected to work for most platforms.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[pbonzini@redhat.com: resolve the SmmCpuFeaturesLib class to OVMF's own
instance]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19061 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm driver from UefiCpuPkg depends on the ACPI_CPU_DATA
structure -- created by a platform- and CPU-specific driver -- in order to
support ACPI S3. The address of this structure is communicated through the
dynamic PCD PcdCpuS3DataAddress.
The "UefiCpuPkg/Include/AcpiCpuData.h" header file documents the fields of
this structure in detail.
The simple/generic "UefiCpuPkg/CpuS3DataDxe" driver creates and populates
the structure in a conformant way, and it co-operates well with
PiSmmCpuDxeSmm, for OVMF's purposes.
PlatformBdsLib CpuS3DataDxe PiSmmCpuDxeSmm S3Resume2Pei
(DXE_DRIVER) (DXE_DRIVER) (DXE_SMM_DRIVER) (PEIM)
-------------- --------------- ---------------- --------------
normal collects data
boot except MTRR
settings into
ACPI_CPU_DATA
sets
PcdCpuS3Da...
signals
End-of-Dxe
|
+----------> collects MTRR
settings into
ACPI_CPU_DATA
installs
[Dxe]Smm
ReadyToLock
|
+---------------------------> fetches
PcdCpuS3Dat...
copies
ACPI_CPU_DATA
into SMRAM
runtime
S3
suspend
S3 transfers
resume control to
PiSmmCpuDxe...
|
uses <----+
ACPI_CPU_DATA
from SMRAM
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19060 6f19259b-4bc3-4df7-8a09-765794883524
This patch complements the previous one, "OvmfPkg: use relaxed AP SMM
synchronization mode". While that patch focuses on the case when the SMI
is raised synchronously by the BSP, on the BSP:
BSPHandler() [UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c]
SmmWaitForApArrival() [UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c]
IsSyncTimerTimeout() [UefiCpuPkg/PiSmmCpuDxeSmm/SyncTimer.c]
this patch concerns itself with the case when it is one of the APs that
raises (and sees delivered) the synchronous SMI:
APHandler() [UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c]
IsSyncTimerTimeout() [UefiCpuPkg/PiSmmCpuDxeSmm/SyncTimer.c]
Namely, in APHandler() the AP waits for the BSP to enter SMM regardless of
PcdCpuSmmSyncMode, for PcdCpuSmmApSyncTimeout microseconds (the default
value is 1 second). If the BSP doesn't show up in SMM within that
interval, then the AP brings it in with a directed SMI, and waits for the
BSP again for PcdCpuSmmApSyncTimeout microseconds.
Although during boot services, SmmControl2DxeTrigger() is only called by
the BSP, at runtime the OS can invoke runtime services from an AP (it can
even be forced with "taskset -c 1 efibootmgr"). Because on QEMU
SmmControl2DxeTrigger() only raises the SMI for the calling processor (BSP
and AP alike), the first interval above times out invariably in such cases
-- the BSP never shows up before the AP calls it in.
In order to mitigate the performance penalty, decrease
PcdCpuSmmApSyncTimeout to one tenth of its default value: 100 ms. (For
comparison, Vlv2TbltDevicePkg sets 1 ms.)
NOTE: once QEMU becomes capable of synchronous broadcast SMIs, this patch
and the previous one ("OvmfPkg: use relaxed AP SMM synchronization mode")
should be reverted, and SmmControl2DxeTrigger() should be adjusted
instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19059 6f19259b-4bc3-4df7-8a09-765794883524
Port 0xb2 on QEMU only sends an SMI to the currently executing processor.
The SMI handler, however, and in particular SmmWaitForApArrival, currently
expects that SmmControl2DxeTrigger triggers an SMI IPI on all processors
rather than just the BSP. Thus all SMM invocations loop for a second (the
default value of PcdCpuSmmApSyncTimeout) before SmmWaitForApArrival sends
another SMI IPI to the APs.
With the default SmmCpuFeaturesLib, 32-bit machines must broadcast SMIs
because 32-bit machines must reset the MTRRs on each entry to system
management modes (they have no SMRRs). However, our virtual platform
does not have problems with cacheability of SMRAM, so we can use "directed"
SMIs instead. To do this, just set gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmSyncMode
to 1 (aka SmmCpuSyncModeRelaxedAp). This fixes SMM on multiprocessor virtual
machines.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19058 6f19259b-4bc3-4df7-8a09-765794883524
This adjusts the previously introduced state save map access functions, to
account for QEMU and KVM's 64-bit state save map following the AMD spec
rather than the Intel one.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: reflow commit message, convert patch to CRLF]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19057 6f19259b-4bc3-4df7-8a09-765794883524
This implementation copies SMRAM state save map access from the
PiSmmCpuDxeSmm module.
The most notable change is:
- dropping support for EFI_SMM_SAVE_STATE_REGISTER_IO
- changing the implementation of EFI_SMM_SAVE_STATE_REGISTER_LMA to use
the SMM revision id instead of a local variable (which
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c initializes from CPUID's LM
bit). This accounts for QEMU's implementation of x86_64, which always
uses revision 0x20064 even if the LM bit is zero.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: reflow commit message & fix typo, convert patch to
CRLF]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19056 6f19259b-4bc3-4df7-8a09-765794883524
SMRR, MTRR, and SMM Feature Control support is not needed on a virtual
platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: insert space between ASSERT and (), convert to CRLF,
refresh against SVN r18958]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19055 6f19259b-4bc3-4df7-8a09-765794883524
The next patches will customize the implementation, but let's start from
the common version to better show the changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[lersek@redhat.com: drop UNI file, keep whitespace intact, generate new
FILE_GUID, split off DSC changes, reflow commit message, refresh against
SVN r18958]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19054 6f19259b-4bc3-4df7-8a09-765794883524
Explanation from Michael Kinney:
This PCD allows a platform to provide PlatformSmmBspElection() in a
platform specific SmmCpuPlatformHookLib instance to decide which CPU
gets elected to be the BSP in each SMI.
The SmmCpuPlatformHookLibNull [instance] always returns EFI_NOT_READY
for that function, which makes the module behave the same as the PCD
being set to FALSE.
The default is TRUE, so the platform lib is always called, so a platform
developer can implement the hook function and does not have to also
change a PCD setting for the hook function to be active.
A platform that wants to eliminate the call to the hook function
[altogether] can set the PCD to FALSE.
So for OVMF, I think it makes sense to set this PCD to FALSE in the DSC
file.
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19053 6f19259b-4bc3-4df7-8a09-765794883524
Although neither LocalApicLib instance is suitable for runtime DXE drivers
(because they access the APIC at the physical address retrieved from
either MSR_IA32_APIC_BASE_ADDRESS or PcdCpuLocalApicBaseAddress), they are
suitable for SMM drivers -- SMM drivers are not influenced by the runtime
OS's virtual address map.
PiSmmCpuDxeSmm links against LocalApicLib. 64-bit Linux guests tend to
enable x2apic mode even in simple VCPU configurations (e.g., 4 sockets, 1
core/socket, 1 thread/core):
[ 0.028173] x2apic enabled
If PiSmmCpuDxeSmm was linked with the BaseXApicLib instance (i.e., with no
x2apic support), then the next runtime service call that is backed by an
SMM driver triggers the following ASSERT in BaseXApicLib (because the
latter notices that x2apic has been enabled, which it doesn't support):
ASSERT .../UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.c(263):
ApicBaseMsr.Bits.Extd == 0
It is reasonable to give all LocalApicLib client modules in OVMF the same
level of x2apic support, hence resolve LocalApicLib globally to
BaseXApicX2ApicLib. This will not be conditional on -D SMM_REQUIRE,
because BaseXApicX2ApicLib is compatible with BaseXApicLib in any
environment where the latter can be used.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19052 6f19259b-4bc3-4df7-8a09-765794883524
UefiCpuPkg/PiSmmCpuDxeSmm depends on this library (the
RegisterCpuInterruptHandler() function specifically) to set up its
specialized page fault handler (SmiPFHandler() -> DumpModuleInfoByIp()).
It doesn't hurt to resolve this library class for all DXE_SMM_DRIVER
modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19050 6f19259b-4bc3-4df7-8a09-765794883524
PiSmmCpuDxeSmm depends on this library class, and it's okay to resolve it
generally for all DXE_SMM_DRIVER modules.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19049 6f19259b-4bc3-4df7-8a09-765794883524
During DXE, drivers save data in the LockBox. A save operation is layered
as follows:
- The unprivileged driver wishing to store data in the LockBox links
against the "MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.inf"
library instance.
The library allows the unprivileged driver to format requests for the
privileged SMM LockBox driver (see below), and to parse responses.
We apply this resolution for DXE_DRIVER modules.
- The privileged SMM LockBox driver is built from
"MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf". This driver
has module type DXE_SMM_DRIVER and can access SMRAM.
The driver delegates command parsing and response formatting to
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf".
Therefore we include this DXE_SMM_DRIVER in the build, and apply said
resolution specifically to it.
(Including the driver requires us to resolve a few of other library
classes for DXE_SMM_DRIVER modules.)
- In PEI, the S3 Resume PEIM (UefiCpuPkg/Universal/Acpi/S3Resume2Pei)
retrieves data from the LockBox. It is capable of searching SMRAM
itself.
We resolve LockBoxLib to
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" specifically
for this one PEIM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19048 6f19259b-4bc3-4df7-8a09-765794883524
Since our fake LockBox must not be selected with -D SMM_REQUIRE (see the
previous patch), it makes sense to set aside memory for it only if -D
SMM_REQUIRE is absent. Modify InitializeRamRegions() accordingly.
This patch completes the -D SMM_REQUIRE-related tweaking of the special
OVMF memory areas.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19047 6f19259b-4bc3-4df7-8a09-765794883524
When the user builds OVMF with -D SMM_REQUIRE, our LockBox implementation
must not be used, since it doesn't actually protect data in the LockBox
from the runtime guest OS. Add an according assert to
LockBoxLibInitialize().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19046 6f19259b-4bc3-4df7-8a09-765794883524
In SVN r15306 (git commit d4ba06df), "OvmfPkg: S3 Resume: fake LockBox
protocol for BootScriptExecutorDxe", we installed a fake LockBox protocol
in OVMF's AcpiS3SaveDxe clone. While our other AcpiS3SaveDxe
customizations remain valid (or harmless), said change is invalid when
OVMF is built with -D SMM_REQUIRE and includes the real protocol provider,
"MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19045 6f19259b-4bc3-4df7-8a09-765794883524
This driver provides EFI_SMM_CPU_IO2_PROTOCOL, which the SMM core depends
on in its gEfiDxeSmmReadyToLockProtocolGuid callback
(SmmReadyToLockHandler(), "MdeModulePkg/Core/PiSmmCore/PiSmmCore.c").
Approached on a higher level, this driver provides the SmmIo member of the
EFI_SMM_SYSTEM_TABLE2 (SMST).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19044 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf" (a DXE_RUNTIME_DRIVER)
implements the SMM Initial Program Loader. It produces
EFI_SMM_BASE2_PROTOCOL and EFI_SMM_COMMUNICATION_PROTOCOL, relying on:
- EFI_SMM_ACCESS2_PROTOCOL
(provided by OvmfPkg/SmmAccess/SmmAccess2Dxe.inf),
- EFI_SMM_CONTROL2_PROTOCOL
(provided by OvmfPkg/SmmControl2Dxe/SmmControl2Dxe.inf).
(The SMM IPL also depends on EFI_SMM_CONFIGURATION_PROTOCOL_GUID, but this
dependency is not enforced in the entry point. A protocol notify callback
is registered instead, hence we can delay providing that protocol via the
PiSmmCpuDxeSmm driver that is (to be) imported from UefiCpuPkg/.)
The SMM IPL loads the SMM core into SMRAM and executes it from there.
Therefore we add the SMM core to the build as well.
For the SMM core, a number of library classes need to be resolved.
Furthermore, each FDF file must provide the GenFds.py BaseTools utility
with a build rule for SMM_CORE; we copy the DXE_CORE's rule.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19043 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_SMM_COMMUNICATION_PROTOCOL implementation that is provided by the
SMM core depends on EFI_SMM_CONTROL2_PROTOCOL; see the
mSmmControl2->Trigger() call in the SmmCommunicationCommunicate() function
[MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c].
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19042 6f19259b-4bc3-4df7-8a09-765794883524
The SMM core depends on EFI_SMM_ACCESS2_PROTOCOL. This small driver (which
is a thin wrapper around "OvmfPkg/SmmAccess/SmramInternal.c" that was
added in the previous patch) provides that protocol.
Notably, EFI_SMM_ACCESS2_PROTOCOL is for boot time only, therefore
our MODULE_TYPE is not DXE_RUNTIME_DRIVER.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19041 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxPeiLib.inf" is the
LockBoxLib instance with SMRAM access for the PEI phase.
Said library instance must, and can, access the LockBox data in SMRAM
directly if it is invoked before SMBASE relocation / SMI handler
installation. In that case, it only needs PEI_SMM_ACCESS_PPI from the
platform, and it doesn't depend on EFI_PEI_SMM_COMMUNICATION_PPI.
OVMF satisfies the description in SVN r18823 ("MdeModulePkg:
SmmLockBoxPeiLib: work without EFI_PEI_SMM_COMMUNICATION_PPI"): in OVMF,
only S3Resume2Pei links against SmmLockBoxPeiLib.
Therefore, introduce a PEIM that produces the PEI_SMM_ACCESS_PPI
interface, enabling SmmLockBoxPeiLib to work; we can omit including
"UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf".
The load / installation order of S3Resume2Pei and SmmAccessPei is
indifferent. SmmAccessPei produces the gEfiAcpiVariableGuid HOB during its
installation (which happens during PEI), but S3Resume2Pei accesses the HOB
only when the DXE IPL calls its S3RestoreConfig2 PPI member, as last act
of PEI.
MCH_SMRAM_D_LCK and MCH_ESMRAMC_T_EN are masked out the way they are, in
SmmAccessPeiEntryPoint() and SmramAccessOpen() respectively, in order to
prevent VS20xx from warning about the (otherwise fully intentional)
truncation in the UINT8 casts. (Warnings reported by Michael Kinney.)
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19040 6f19259b-4bc3-4df7-8a09-765794883524
PlatformPei calls GetSystemMemorySizeBelow4gb() in three locations:
- PublishPeiMemory(): on normal boot, the permanent PEI RAM is installed
so that it ends with the RAM below 4GB,
- QemuInitializeRam(): on normal boot, memory resource descriptor HOBs are
created for the RAM below 4GB; plus MTRR attributes are set
(independently of S3 vs. normal boot)
- MemMapInitialization(): an MMIO resource descriptor HOB is created for
PCI resource allocation, on normal boot, starting at max(RAM below 4GB,
2GB).
The first two of these is adjusted for the configured TSEG size, if
PcdSmmSmramRequire is set:
- In PublishPeiMemory(), the permanent PEI RAM is kept under TSEG.
- In QemuInitializeRam(), we must keep the DXE out of TSEG.
One idea would be to simply trim the [1MB .. LowerMemorySize] memory
resource descriptor HOB, leaving a hole for TSEG in the memory space
map.
The SMM IPL will however want to massage the caching attributes of the
SMRAM range that it loads the SMM core into, with
gDS->SetMemorySpaceAttributes(), and that won't work on a hole. So,
instead of trimming this range, split the TSEG area off, and report it
as a cacheable reserved memory resource.
Finally, since reserved memory can be allocated too, pre-allocate TSEG
in InitializeRamRegions(), after QemuInitializeRam() returns. (Note that
this step alone does not suffice without the resource descriptor HOB
trickery: if we omit that, then the DXE IPL PEIM fails to load and start
the DXE core.)
- In MemMapInitialization(), the start of the PCI MMIO range is not
affected.
We choose the largest option (8MB) for the default TSEG size. Michael
Kinney pointed out that the SMBASE relocation in PiSmmCpuDxeSmm consumes
SMRAM proportionally to the number of CPUs. From the three options
available, he reported that 8MB was both necessary and sufficient for the
SMBASE relocation to succeed with 255 CPUs:
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/3020/focus=3137
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/3020/focus=3177
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19039 6f19259b-4bc3-4df7-8a09-765794883524
AddReservedMemoryBaseSizeHob() should be able to set the same resource
attributes for reserved memory as AddMemoryBaseSizeHob() sets for system
memory. Add a new parameter called "Cacheable" to
AddReservedMemoryBaseSizeHob(), and set it to FALSE in the only caller we
have at the moment.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19038 6f19259b-4bc3-4df7-8a09-765794883524
If OVMF was built with -D SMM_REQUIRE, that implies that the runtime OS is
not trusted and we should defend against it tampering with the firmware's
data.
One such datum is the PEI firmware volume (PEIFV). Normally PEIFV is
decompressed on the first boot by SEC, then the OS preserves it across S3
suspend-resume cycles; at S3 resume SEC just reuses the originally
decompressed PEIFV.
However, if we don't trust the OS, then SEC must decompress PEIFV from the
pristine flash every time, lest we execute OS-injected code or work with
OS-injected data.
Due to how FVMAIN_COMPACT is organized, we can't decompress just PEIFV;
the decompression brings DXEFV with itself, plus it uses a temporary
output buffer and a scratch buffer too, which even reach above the end of
the finally installed DXEFV. For this reason we must keep away a
non-malicious OS from DXEFV too, plus the memory up to
PcdOvmfDecomprScratchEnd.
The delay introduced by the LZMA decompression on S3 resume is negligible.
If -D SMM_REQUIRE is not specified, then PcdSmmSmramRequire remains FALSE
(from the DEC file), and then this patch has no effect (not counting some
changed debug messages).
If QEMU doesn't support S3 (or the user disabled it on the QEMU command
line), then this patch has no effect also.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19037 6f19259b-4bc3-4df7-8a09-765794883524
The DecompressMemFvs() function in "OvmfPkg/Sec/SecMain.c" uses more
memory, temporarily, than what PEIFV and DXEFV will ultimately need.
First, it uses an output buffer for decompression, second, the
decompression itself needs a scratch buffer (and this scratch buffer is
the highest area that SEC uses).
DecompressMemFvs() used to be called on normal boots only (ie. not on S3
resume), which is why the decompression output buffer and the scratch
buffer were allowed to scribble over RAM. However, we'll soon start to
worry during S3 resume that the runtime OS might tamper with the
pre-decompressed PEIFV, and we'll decompress the firmware volumes on S3
resume too, from pristine flash. For this we'll need to know the end of
the scratch buffer in advance, so we can prepare a non-malicious OS for
it.
Calculate the end of the scratch buffer statically in the FDF files, and
assert in DecompressMemFvs() that the runtime decompression will match it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19036 6f19259b-4bc3-4df7-8a09-765794883524
BaseExtractGuidedSectionLib uses a table at the static physical address
PcdGuidedExtractHandlerTableAddress, and modules that are linked against
BaseExtractGuidedSectionLib are expected to work together on that table.
Namely, some modules can register handlers for GUIDed sections, some other
modules can decode such sections with the pre-registered handlers. The
table carries persistent information between these modules.
BaseExtractGuidedSectionLib checks a table signature whenever it is used
(by whichever module that is linked against it), and at the first use
(identified by a signature mismatch) it initializes the table.
One of the module types that BaseExtractGuidedSectionLib can be used with
is SEC, if the SEC module in question runs with the platform's RAM already
available.
In such cases the question emerges whether the initial contents of the RAM
(ie. contents that predate the very first signature check) can be trusted.
Normally RAM starts out with all zeroes (leading to a signature mismatch
on the first check); however a malicious runtime OS can populate the area
with some payload, then force a warm platform reset or an S3
suspend-and-resume. In such cases the signature check in the SEC module
might not fire, and ExtractGuidedSectionDecode() might run code injected
by the runtime OS, as part of SEC (ie. with high privileges).
Therefore we clear the handler table in SEC.
See also git commit ad43bc6b2e (SVN rev 15433) -- this patch secures the
(d) and (e) code paths examined in that commit. Furthermore, a
non-malicious runtime OS will observe no change in behavior; see case (c)
in said commit.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[michael.d.kinney@intel.com: prevent VS20xx loop intrinsic with volatile]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19035 6f19259b-4bc3-4df7-8a09-765794883524
This build time flag and corresponding Feature PCD will control whether
OVMF supports (and, equivalently, requires) SMM/SMRAM support from QEMU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19034 6f19259b-4bc3-4df7-8a09-765794883524
Before introducing the SMM driver interface, clean up #include directives
and [LibraryClasses] by:
- removing what's not directly used (HobLib and UefiLib),
- adding what's used but not spelled out (DevicePathLib),
- sorting the result.
This helps with seeing each source file's dependencies and with
determining the library classes for the SMM driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18672 6f19259b-4bc3-4df7-8a09-765794883524
In preparation for introducing an SMM interface to this driver, move the
following traits to separate files, so that we can replace them in the new
SMM INF file:
- Protocol installations. The SMM driver will install protocol interfaces
in the SMM protocol database, using SMM services.
- Virtual address change handler and pointer conversions. SMM drivers run
with physical mappings and pointers must not be converted.
There are further restrictions and changes for an SMM driver, but the rest
of the code either complies with those already, or will handle the changes
transparently. For example:
- SMM drivers have access to both UEFI and SMM protocols in their entry
points (see the PI spec 1.4, "1.7 SMM Driver Initialization"),
- MemoryAllocationLib has an SMM instance that serves allocation requests
with the gSmst->SmmAllocatePool() service transparently, allocating
runtime-marked SMRAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18671 6f19259b-4bc3-4df7-8a09-765794883524
Currently the EFI_FW_VOL_INSTANCE and ESAL_FWB_GLOBAL structures declare
the following entries as arrays, with two entries each:
- EFI_FW_VOL_INSTANCE.FvBase[2]
- ESAL_FWB_GLOBAL.FvInstance[2]
In every case, the entry at subscript zero is meant as "physical address",
while the entry at subscript one is meant as "virtual address" -- a
pointer to the same object. The virtual address entry is originally
initialized to the physical address, and then it is converted to the
virtual mapping in FvbVirtualddressChangeEvent().
Functions that (a) read the listed fields and (b) run both before and
after the virtual address change event -- since this is a runtime DXE
driver -- derive the correct array subscript by calling the
EfiGoneVirtual() function from UefiRuntimeLib.
The problem with the above infrastructure is that it's entirely
superfluous.
EfiGoneVirtual() "knows" whether EFI has gone virtual only because the
UefiRuntimeLib constructor registers the exact same kind of virtual
address change callback, and the callback flips a static variabe to TRUE,
and EfiGoneVirtual() queries that static variable.
In effect this means for QemuFlashFvbServicesRuntimeDxe: "when there is a
virtual address change, convert the entries with subscript one from
physical to virtual, and from then on use the entries with subscript one".
This would only make sense if QemuFlashFvbServicesRuntimeDxe ever needed
the original (physical) addresses (ie. the entries with subscript zero)
after the virtual address change, but that is not the case.
Replace the arrays with single elements. The subscript zero elements
simply disappear, and the single elements take the role of the prior
subscript one elements.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18670 6f19259b-4bc3-4df7-8a09-765794883524
The ESAL_FWB_GLOBAL.FvbScratchSpace array is never initialized (it
contains garbage from AllocateRuntimePool()). Its element at subscript one
(=FVB_VIRTUAL), containing garbage as well, is converted to virtual
mapping. Then the array is never used again.
Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18669 6f19259b-4bc3-4df7-8a09-765794883524
The EFI_FW_VOL_INSTANCE.FvbDevLock member is initialized and then never
used. Remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18668 6f19259b-4bc3-4df7-8a09-765794883524
We build this driver for X64 as well -- the comment isn't overly
important, but it shouldn't be misleading.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18667 6f19259b-4bc3-4df7-8a09-765794883524
Some of the line lengths in this driver are atrocious. While we have to
put up with the status quo outside of OvmfPkg, we can at least rewrap this
driver before refactoring it.
In the FvbInitialize() function there's no way around introducing two
local variables, just for the sake of sensibly rewrapping the code.
Furthermore, in "FwBlockService.c" the function comment blocks are now
indented; their original position causes diff to print bogus function
names at the top of hunks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18666 6f19259b-4bc3-4df7-8a09-765794883524
Empty cdroms are not going to connect, avoid waiting for the backend to
switch to state 4, which is never going to happen, and return
error instead from XenPvBlockFrontInitialization(). Detect an
empty cdrom by looking at the "params" node on xenstore, which is set to
"" or "aio:" for empty drives by libxl.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18651 6f19259b-4bc3-4df7-8a09-765794883524
(1) VirtioLib allocates the virtio ring in EfiBootServicesData memory.
(This is intentional.) Code that executes after ExitBootServices() is
permitted to reuse such memory.
(2) The hypervisor is allowed to look at, and act upon, a live virtio ring
at any time, even without explicit virtio kicks from the guest.
Should boot loader code or kernel code, running between ExitBootServices()
and the kernel's own virtio drivers resetting the device, overwrite the
pages that used to contain the virtio ring before ExitBootServices(), QEMU
could theoretically interpret that unrelated data as garbage ring
contents, and abort the guest.
Although we have seen no such reports, better be prudent and reset the
device in an ExitBootServices() event handler. Among other things, this
causes QEMU to forget about the device's virtio ring.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18624 6f19259b-4bc3-4df7-8a09-765794883524
(1) VirtioLib allocates the virtio ring in EfiBootServicesData memory.
(This is intentional.) Code that executes after ExitBootServices() is
permitted to reuse such memory.
(2) The hypervisor is allowed to look at, and act upon, a live virtio ring
at any time, even without explicit virtio kicks from the guest.
Should boot loader code or kernel code, running between ExitBootServices()
and the kernel's own virtio drivers resetting the device, overwrite the
pages that used to contain the virtio ring before ExitBootServices(), QEMU
could theoretically interpret that unrelated data as garbage ring
contents, and abort the guest.
Although we have seen no such reports, better be prudent and reset the
device in an ExitBootServices() event handler. Among other things, this
causes QEMU to forget about the device's virtio ring.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18623 6f19259b-4bc3-4df7-8a09-765794883524
The update to the LocalApicLib instances to make sure the Local APIC is
initialized before use (SVN r18595 / git commit 6d72ff7d9d) generates an
ASSERT() when SOURCE_DEBUG_ENABLE is enabled for OVMF.
The fix is to initialize the Local APIC Timer and mask it before
initializing the DebugAgent.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap code comment, rewrap commit msg, add precise
commit ref]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18622 6f19259b-4bc3-4df7-8a09-765794883524
With gcc5 and enabling SECURE_BOOT and NETWORK_IP6, the build
failed with this error:
GenFv: ERROR 3000: Invalid
the required fv image size 0x814c18 exceeds the set fv image size 0x800000
Raise the DXEFV size to 9 MB to fix the build error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18577 6f19259b-4bc3-4df7-8a09-765794883524
Increase the section alignment to 4 KB for DXE_RUNTIME_DRIVER modules.
This allows the OS to map them with tightened permissions (i.e., R-X for
.text and RW- for .data). This is a prerequisite for enabling the
EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA (sic)
feature that was introduced in UEFIv2.5.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18564 6f19259b-4bc3-4df7-8a09-765794883524
The TFTP command is easy to use, it has very nice documentation
(accessible with "HELP TFTP" in the shell), and it's a very versatile tool
for downloading files from the host to the guest, via virtual network,
while the guest is in the UEFI shell.
Even better, enabling this command in the shell increases the uncompressed
DXEFV size only by 12896 bytes, in my X64 build, and the final size
increase (after LZMA compression) that is visible in the FVMAIN_COMPACT
volume is merely 2576 bytes.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18554 6f19259b-4bc3-4df7-8a09-765794883524
In this patch, we replace the traditional IDE driver stack that comes from
PcAtChipsetPkg and IntelFrameworkModulePkg with more featureful drivers
from OvmfPkg and MdeModulePkg. The resultant driver stack is compatible
with the previous one, but provides more protocols, on more kinds of
virtual hardware.
Remove:
- PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
(removing EFI_IDE_CONTROLLER_INIT_PROTOCOL [1])
Remove the dependent:
- IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
(removing EFI_DISK_INFO_PROTOCOL [2],
EFI_BLOCK_IO_PROTOCOL [3])
As replacement, add:
- OvmfPkg/SataControllerDxe/SataControllerDxe.inf
(supplying EFI_IDE_CONTROLLER_INIT_PROTOCOL [1])
On top of which, add the dependent:
- MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
(providing EFI_ATA_PASS_THRU_PROTOCOL,
EFI_EXT_SCSI_PASS_THRU_PROTOCOL)
On top of which, add the dependent:
- MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
(supplying EFI_DISK_INFO_PROTOCOL [2],
EFI_BLOCK_IO_PROTOCOL [3],
providing EFI_BLOCK_IO2PROTOCOL,
EFI_STORAGE_SECURITY_COMMAND_PROTOCOL)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[lersek@redhat.com: rewrote commit message]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18532 6f19259b-4bc3-4df7-8a09-765794883524
The OpenFirmware device paths that QEMU generates for these disks and
CD-ROMs are very similar to those generated for the i440fx IDE disks and
CD-ROMs (including the same number of devpath nodes necessary for unique
parsing). The interpretations and the translation to UEFI devpath
fragments are different, of course.
(The spaces after "ide@1,1" are inserted below only for illustration
purposes.)
primary or secondary
| master or slave
v v
i440fx IDE: /pci@i0cf8/ide@1,1 /drive@0/disk@0
Q35 SATA: /pci@i0cf8/pci8086,2922@1f,2/drive@1/disk@0
^ ^
| device number
| (fixed 0)
channel (port) number
The similarity is reflected in the translation output (spaces again
inserted for illustration only):
i440fx IDE: PciRoot(0x0)/Pci(0x1,0x1) /Ata(Primary,Master,0x0)
Q35 SATA: PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x1,0x0,0x0)
^ ^ ^
| | LUN;
| | always 0 on Q35
| port multiplier port
| number; always 0 on Q35
channel (port) number
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18531 6f19259b-4bc3-4df7-8a09-765794883524
When we bind the SATA controller in SataControllerStart(), we read the NP
("Number of Ports") bitfield from the CAP ("HBA Capabilities") register of
the controller. (See the AHCI 1.3.1 spec.)
This register is memory mapped. If we'd like to access it, we must at
least enable memory space access for the device. In addition, Feng Tian
recommended enabling Bus Master DMA in
<http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10545/focus=10659>.
We also enable IO space access for completeness.
Further, because we change the PCI attributes of the device with the above
when binding it, we must also restore its original PCI attributes when
unbinding it. See the Driver Writer's Guide for UEFI 2.3.1 v1.01, section
18.3 "PCI drivers" | 18.3.2 "Start() and Stop()".
(OvmfPkg's copy of SataControllerDxe differs from the same in DuetPkg
because Duet inherits a pre-configured SATA controller from the BIOS, as
explained by Feng. Technically, DuetPkg's SataControllerDxe could also
apply the technique seen in this patch.)
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Feng Tian <feng.tian@intel.com>
Suggested-by: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18528 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add another PCI operation to
SataControllerStart(), which, on error, has to be rolled back similarly to
other actions already being done in SataControllerStart(). Since that PCI
operation won't provide a non-NULL pointer on success, its rollback isn't
really suitable for the current error handling in SataControllerStart().
Employ the traditional cascading labels instead.
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18527 6f19259b-4bc3-4df7-8a09-765794883524
Edk2 maintainers reached the consensus that SataControllerDxe was
inherently platform specific, for which reason it was not appropriate for
either PcAtChipsetPkg nor MdeModulePkg. Hence, if OvmfPkg wanted to use
it, it should either reference it directly from under DuetPkg, or copy it.
Given that DuetPkg is another "leaf" platform in edk2, and that in the
upcoming patches we'll actually modify the driver, the ultimate decision
(reached months ago on the list, after Reza's v2 posting) is that OvmfPkg
shall copy the driver.
This patch does that; the only difference being a fresh FILE_GUID in the
INF file.
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[lersek@redhat.com: updated commit message, generated fresh FILE_GUID]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18526 6f19259b-4bc3-4df7-8a09-765794883524
(PcdSetNxForStack == TRUE) breaks a number of GRUB versions that, it turns
out, are still widely in use. Disable PcdSetNxForStack by default for now.
QEMU users can enable it dynamically using the micro-feature added in the
previous patch.
Reported-by: Anthony Perard <anthony.perard@citrix.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18472 6f19259b-4bc3-4df7-8a09-765794883524
Control them with:
-fw_cfg name=opt/ovmf/PcdPropertiesTableEnable,file=no.txt \
-fw_cfg name=opt/ovmf/PcdSetNxForStack,file=yes.txt
where the contents of the text files can be
[0nN1yY](\n|\r\n)?
The macro trickery is not optimal, but it is caused by PcdSetBool(), which
is itself a macro, and can only take open-coded PCD names (ie. no
variables, like function parameters).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18471 6f19259b-4bc3-4df7-8a09-765794883524
Since PcdPropertiesTableEnable is used by the DXE Core (in the
InstallPropertiesTable() function, which runs at End-of-Dxe), we must also
change the PcdLib class resolution for that module, from the default
BasePcdLibNull to DxePcdLib.
Traditionally we've considered the DXE Core to be incapable of accessing
dynamic PCDs -- the PCD PPI is not available any longer to the DXE Core,
and the PCD Protocol is not available to it *yet*. There are exceptions
however: if the DXE Core can ensure, by whatever means, that the PCD
Protocol *is* available, then DxePcdLib will just work (the latter even
lists DXE_CORE as an allowed client module type). Namely, DxePcdLib looks
up the PCD Protocol dynamically, on the first library call that actually
needs it (for accessing a dynamic PCD); the lookup doesn't occur in a
library constructor.
And because the DXE Core fetches PcdPropertiesTableEnable at End-of-Dxe,
the PCD Protocol is definitely available then.
In addition, we change the default value of PcdPropertiesTableEnable from
the inherited TRUE to FALSE. It makes no difference at this point (our
runtime DXE drivers are not built with the required 4KB section alignment
anyway), but it's better to be clear about this. The properties table
feature requires OS compatibility, and it breaks Windows 7 minimally.
Therefore the default should be FALSE.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18470 6f19259b-4bc3-4df7-8a09-765794883524
Plus, because PcdSetNxForStack is used by the DXE IPL PEIM (in the
HandOffToDxeCore() function, and in the CreateIdentityMappingPageTables()
function called by the former), we must change the PcdLib class resolution
for that module, from the default BasePcdLibNull to PeiPcdLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18469 6f19259b-4bc3-4df7-8a09-765794883524
The logic we have in place for i440fx does not work reliably on q35. For
example, if the guest has 2GB of RAM, we allow the PCI root bridge driver
to allocate the legacy video RAM BAR from the [2048 MB, 2816 MB] range,
which falls strictly outside of the Q35 PCI host MMIO aperture that QEMU
configures, and advertizes in ACPI.
In turn, PCI BARs that exist outside of the PCI host aperture that is
exposed in ACPI break Windows guests.
Allocating PCI MMIO resources at or above 3GB on Q35 ensures that we stay
within QEMU's aperture. (See the "w32.begin" assignments in
"hw/pci-host/q35.c".) Furthermore, in pc_q35_init() (file
"hw/i386/pc_q35.c"), QEMU ensures that the low RAM never "leaks" above
3GB.
The i440fx logic is left unchanged.
The Windows guest malfunction on Q35 was reported by Jon Panozzo of Lime
Technology, Inc.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jon Panozzo <jonp@lime-technology.com>
Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Jonathan Panozzo <jonp@lime-technology.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18393 6f19259b-4bc3-4df7-8a09-765794883524
Bruce Cran reported the following issue:
With iasl version 20150410-64 building OvmfX64 (using OvmfPkg/build.sh
-a X64 -t GCC49 -b RELEASE) results in a couple of warnings about
methods that should be serialized:
.../OvmfPkg/AcpiTables/AcpiTables/OUTPUT/./Dsdt.iiii
95: Method (_CRS, 0) {
Remark 2120 - Control Method should be made Serialized ^ (due to
creation of named objects within)
.../OvmfPkg/AcpiTables/AcpiTables/OUTPUT/./Dsdt.iiii
235: Method (PCRS, 1, NotSerialized) {
Remark 2120 - Control Method should be made Serialized ^ (due to
creation of named objects within)
The ACPI 6.0 spec justifies the above warnings in "19.6.82 Method (Declare
Control Method)":
[...] The serialize rule can be used to prevent reentering of a method.
This is especially useful if the method creates namespace objects.
Without the serialize rule, the reentering of a method will fail when it
attempts to create the same namespace object. [...]
Cc: Bruce Cran <bruce@cran.org.uk>
Reported-by: Bruce Cran <bruce@cran.org.uk>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18392 6f19259b-4bc3-4df7-8a09-765794883524
We have an old bug in BootModeInitialization(): firmware is supposed to
clear the CMOS register 0xF after reading it for the last time. QEMU only
sets this register to 0xFE in "hw/timer/mc146818rtc.c", function
rtc_notify_suspend(), and never clears it. However, SeaBIOS does clear it
in "src/post.c" and "src/resume.c", so let's follow suit.
We've never noticed this until now because the register gets mysteriously
cleared on non-resume reboots when OVMF runs on qemu-system-x86_64. But on
qemu-system-i386, this bug breaks a (suspend, resume, reboot) triplet:
after the last step OVMF thinks it's resuming because when it actually
resumed (in the middle step), it failed to clear the register.
BootModeInitialization() is the perfect function to clear the register,
right after setting mBootMode: the function is executed on both normal
boot and on S3 resume; it succeeds DebugDumpCmos() -- so the dump is not
affected by this patch --; and everything that relies on S3 vs. normal
boot after we clear the register uses mBootMode anyway.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18391 6f19259b-4bc3-4df7-8a09-765794883524
SVN rev 18166 ("MdeModulePkg DxeIpl: Add stack NX support") enables
platforms to request non-executable stack for the DXE phase, by setting
PcdSetNxForStack to TRUE.
The PCD defaults to FALSE, because:
(a) A non-executable DXE stack is a new feature and causes changes in
behavior. Some platform could rely on executing code from the stack.
(b) The code enabling NX in the DXE IPL PEIM enforces the
PcdSetNxForStack ==> PcdDxeIplBuildPageTables
implication for "64-bit PEI + 64-bit DXE" platforms, with a new
ASSERT(). Some platform might not comply with this requirement
immediately.
Regarding (a), in none of the OVMF builds do we try to execute code from
the stack.
Regarding (b):
- In the OvmfPkgX64.dsc build (which is where (b) applies) we simply
inherit the PcdDxeIplBuildPageTables|TRUE default from
"MdeModulePkg/MdeModulePkg.dec". Therefore we can set PcdSetNxForStack
to TRUE.
- In OvmfPkgIa32X64.dsc, page tables are built by default for DXE. Hence
we can set PcdSetNxForStack to TRUE.
- In OvmfPkgIa32.dsc, page tables used not to be necessary until now.
After we set PcdSetNxForStack to TRUE in this patch, the DXE IPL will
construct page tables even when it is built as part of OvmfPkgIa32.dsc,
provided the (virtual) hardware supports both PAE mode and the XD bit.
Should this setting cause problems in a GPU (or other device) passthru
scenario, with a UEFI_DRIVER in the PCI option rom attempting to execute
code from the stack, the feature can be dynamically disabled on the QEMU
command line, with "-cpu <MODEL>,-nx".
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: "Zeng, Star" <star.zeng@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18360 6f19259b-4bc3-4df7-8a09-765794883524
Since SVN r18316 / git 5ca29abe52, the HTTP driver needs the HTTP
utilities driver to parse the headers of HTTP requests. Add the driver
into OVMF so that the HTTP driver can work properly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18359 6f19259b-4bc3-4df7-8a09-765794883524
Since Variable driver has been updated to consume the separated VarCheckLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18281 6f19259b-4bc3-4df7-8a09-765794883524
This commit introdues a new build option to OvmfPkg: HTTP_BOOT_ENABLE.
When HttpBoot is enabled, a new Network boot option will show in the
boot manager menu with the device path like this:
PciRoot(0x0)/Pci(0x3,0x0)/MAC(525400123456,0x1)/IPv4(0.0.0.0)/Uri()
It works like the PXE one but fetches the NBP from the given http
url instead of the tftp service.
A simple testing environment can be set up with the QEMU tap network
and dnsmasq + lighttpd.
Here is the example of the dnsmasq config:
interface=<tap interface>
dhcp-range=192.168.111.100,192.168.111.120,12h
dhcp-option=60,"HTTPClient"
dhcp-boot="http://<tap ip>/<efi file>"
It's similar to the PXE server settings except the tftp function is
disabled, the option 60 must be "HTTPClient", and the boot uri is a
http url.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Ching-Pang Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18258 6f19259b-4bc3-4df7-8a09-765794883524
The Clang assembler for AArch64 chokes on the value 0XEA1 since it
expects the 0x prefix to use a lower case x.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18204 6f19259b-4bc3-4df7-8a09-765794883524
Also set the DocRev field the way QEMU exposes it, because
MdeModulePkg/Universal/SmbiosDxe lets us control that field too.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18182 6f19259b-4bc3-4df7-8a09-765794883524
At this point all platforms that use OvmfPkg/SmbiosPlatformDxe in edk2,
namely ArmVirtQemu.dsc and OvmfPkg*.dsc, have been migrated to
SmbiosVersionLib. Therefore SmbiosPlatformDxe itself can forego verifying
QEMU's SMBIOS entry point; if SmbiosVersionLib's validation was
successful, it should just rely on that.
(Note that SmbiosPlatformDxe has a depex on EFI_SMBIOS_PROTOCOL, installed
by SmbiosDxe, containing SmbiosVersionLib, therefore the set/get order of
PcdQemuSmbiosValidated is ensured.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18180 6f19259b-4bc3-4df7-8a09-765794883524
This dynamic PCD will enable a small code de-duplication between
OvmfPkg/SmbiosPlatformDxe and OvmfPkg/Library/SmbiosVersionLib. Since both
of those are also used in ArmVirtQemu.dsc, and we should avoid
cross-package commits when possible, this patch declares
PcdQemuSmbiosValidated first, and sets defaults for it in the OvmfPkg DSC
files.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18178 6f19259b-4bc3-4df7-8a09-765794883524
This patch de-duplicates the logic added in commit
OvmfPkg: PlatformPei: set SMBIOS entry point version dynamically
(git 37baf06b, SVN r17676) by hooking DetectSmbiosVersionLib into
SmbiosDxe.
Although said commit was supposed to work with SMBIOS 3.0 payloads from
QEMU, in practice that never worked, because the size / signature checks
in SmbiosVersionInitialization() would always fail, due to the SMBIOS 3.0
entry point being structurally different. Therefore this patch doesn't
regress OvmfPkg.
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18175 6f19259b-4bc3-4df7-8a09-765794883524
Introduce a minimal library instance for fetching and validating the
SMBIOS entry point structure exposed by QEMU over fw_cfg. This library is
meant to be hooked into MdeModulePkg/Universal/SmbiosDxe by platform DSC
files, so that the library can set the PCD(s) that SmbiosDxe consumes at
the right moment.
At the moment only SMBIOS 2.x entry points are recognized.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Wei Huang <wei@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18174 6f19259b-4bc3-4df7-8a09-765794883524
The LineNumber parameter of the DebugAssert() function has type UINTN.
DebugAssert() passes it to AsciiSPrint() with the %d conversion specifier
at the moment, but %d would require an INT32 argument.
Fix this by casting LineNumber to UINT64, also employing the matching
decimal conversion specifier, %Lu.
(Another possibility would be to cast LineNumber to INT32, but a
UINTN->INT32 cast is not value preserving, generally speaking.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Scott Duplichan <scott@notabs.org>
Reported-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18173 6f19259b-4bc3-4df7-8a09-765794883524
The Xen code in SmbiosPlatformDxe is centered on the informational HOB
with GUID gEfiXenInfoGuid, and the address constants
XEN_SMBIOS_PHYSICAL_ADDRESS=0x000EB000,
XEN_SMBIOS_PHYSICAL_END=0x000F0000.
This Xen hand-off mechanism is specific to the IA32 and X64 architectures,
and it is very unlikely that a future ARM / AARCH64 implementation would
follow it. Therefore, sequester the IA32 / X64 specific code from the rest
of the source, by renaming "Xen.c" to "X86Xen.c", and adding a
GetXenSmbiosTables() stub function in "ArmXen.c" that returns NULL.
(Those file names are inspired by
"OvmfPkg/Library/XenHypercallLib/X86XenHypercall.c".)
The call site in SmbiosTablePublishEntry() [SmbiosPlatformDxe.c] is aware
that a NULL return value means "Xen SMBIOS tables not found", and will
continue to the QEMU tables (for which the retrieval mechanism is shared
by x86 and Arm).
This change enables SmbiosPlatformDxe for ARM architectures; update the
VALID_ARCHITECTURES comment accordingly.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18040 6f19259b-4bc3-4df7-8a09-765794883524
This function is only called from Xen.c, so it should be defined in Xen.c
and have internal linkage (ie. STATIC).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18039 6f19259b-4bc3-4df7-8a09-765794883524
At this point, nothing in the OVMF build calls EFI_ACPI_S3_SAVE_PROTOCOL
member functions; simplify the code by dropping this protocol interface.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18038 6f19259b-4bc3-4df7-8a09-765794883524
Currently we have the following call chain in OVMF:
PlatformBdsPolicyBehavior()
[OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
//
// signals End-of-Dxe
//
OnEndOfDxe() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
S3Ready() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
//
// 1. saves S3 state
//
SaveS3BootScript() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
//
// 2. saves INFO opcode in S3 boot script
// 3. installs DxeSmmReadyToLockProtocol
//
The bottom of this call chain was introduced in git commit 5a217a06 (SVN
r15305, "OvmfPkg: S3 Suspend: save boot script after ACPI context"). That
patch was necessary because there was no other way, due to GenericBdsLib
calling S3Save() from BdsLibBootViaBootOption(), to perform the necessary
steps in the right order:
- save S3 system information,
- save a final (well, only) boot script opcode,
- signal DxeSmmReadyToLock, closing the boot script, and locking down
LockBox and SMM.
The GenericBdsLib bug has been fixed in the previous patch -- the call in
BdsLibBootViaBootOption() has been eliminated.
Therefore, hoist the SaveS3BootScript() code, and call, from
OvmfPkg/AcpiS3SaveDxe, to PlatformBdsLib:
PlatformBdsPolicyBehavior()
[OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
//
// signals End-of-Dxe
//
OnEndOfDxe() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
S3Ready() [OvmfPkg/AcpiS3SaveDxe/AcpiS3Save.c]
//
// 1. saves S3 state
//
<---
SaveS3BootScript() [OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
//
// 2. saves INFO opcode in S3 boot script
// 3. installs DxeSmmReadyToLockProtocol
//
The installation of DxeSmmReadyToLockProtocol belongs with Platform BDS,
not AcpiS3SaveDxe, and we can now undo the hack in SVN r15305, without
upsetting the relative order of the steps.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18037 6f19259b-4bc3-4df7-8a09-765794883524
(Paraphrasing git commit 9cd7d3c5 / SVN r17713:)
Currently, OvmfPkg fails to signal the End-of-Dxe event group when
entering the BDS phase, which results in some loss of functionality, eg.
variable reclaim in the variable driver, and the memory region splitting
in the DXE core that belongs to the properties table feature specified in
UEFI-2.5.
As discussed on the edk2-devel mailing list here:
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16109
it is up to the platform BDS to signal End-of-Dxe, since there may be
platform specific ordering constraints with respect to the signalling of
the event that are difficult to honor at the generic level.
(OvmfPkg specifics:)
(1) In OvmfPkg, we can't signal End-of-Dxe before PCI enumeration
completes. According to the previous patch, that would trigger
OvmfPkg/AcpiS3SaveDxe to save S3 state *before* the following chain of
action happened:
- PCI enumeration completes
- ACPI tables are installed by OvmfPkg/AcpiPlatformDxe
- the FACS table becomes available
Since OvmfPkg/AcpiS3SaveDxe can only save S3 state once the FACS table
is available, we must delay the End-of-Dxe signal until after PCI
enumeration completes (ie. root bridges are connected).
(2) Pre-patch, S3Ready() in OvmfPkg/AcpiS3SaveDxe is entered from
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c].
After the patch, we enter S3Ready() earlier than that, by signaling
End-of-Dxe in PlatformBdsPolicyBehavior(). The timing / location of
this new call is correct as well, and the original call (that now
becomes the chronologically second call) becomes a no-op: S3Ready() is
protected against 2nd and later entries.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18035 6f19259b-4bc3-4df7-8a09-765794883524
Call S3Ready() whenever the first of the following occurs:
- a driver signals End-of-Dxe,
- a driver calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save().
S3Ready() already contains a static, function scope "latch" that causes it
to exit early when called for the second time or later.
(At the moment, the only platform in the edk2 tree that includes this
driver is OvmfPkg. That platform does not signal End-of-Dxe (yet).)
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/16088/focus=16146
Suggested-by: Yao Jiewen <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18034 6f19259b-4bc3-4df7-8a09-765794883524
We are preparing for detaching the S3Ready() functionality from the
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we
will hook the same logic to the End-of-Dxe event group.
The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize().
According to the documenation,
This function returns the size of the legacy memory (meaning below 1 MB)
that is required during an S3 resume. Before the Framework-based
firmware transfers control to the OS, it has to transition from flat
mode into real mode in case the OS supplies only a real-mode waking
vector. This transition requires a certain amount of legacy memory.
After getting the size of legacy memory below, the caller is responsible
for allocating the legacy memory below 1 MB according to the size that
is returned. The specific implementation of allocating the legacy memory
is out of the scope of this specification.
When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the
legacy memory allocated above must be passed to it, in the
LegacyMemoryAddress parameter.
In practice however:
- The S3Ready() function ignores the LegacyMemoryAddress completely.
- No code in the edk2 tree calls
EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever.
- All callers of this specific implementation of
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL
LegacyMemoryAddress:
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c]
For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never
called, and that the LegacyMemoryAddress parameter is always NULL.
This fact is important to capture in the code, because in the End-of-Dxe
callback, no LegacyMemoryAddress parameter can be taken. So let's make it
clear that we actually don't even have any use for that parameter.
This patch ports the identical change from IntelFrameworkModulePkg to
OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18033 6f19259b-4bc3-4df7-8a09-765794883524
The OFW device path that QEMU exports in the "bootorder" fw_cfg file, for
a device that is plugged into the main PCI root bus, is:
/pci@i0cf8/...
Whereas the same device plugged into the N'th extra root bus results in:
/pci@i0cf8,N/pci-bridge@0/...
(N is in hex.)
Extend TranslatePciOfwNodes() so that it not assume a single PCI root;
instead it parse the extra root bus serial number if present, and resolve
it in the translation to the UEFI devpath fragment.
Note that the "pci-bridge@0" node is a characteristic of QEMU's PXB
device. It reflects the actual emulated PCI hierarchy. We don't parse it
specifically in this patch, because it is automatically handled by the
bridge sequence translator added recently in SVN rev 17385 (git commit
feca17fa4b) -- "OvmfPkg: QemuBootOrderLib: parse OFW device path nodes of
PCI bridges".
The macro EXAMINED_OFW_NODES need not be raised from 6. The longest OFW
device paths that we wish to recognize under this new scheme comprise 5
nodes. The initial "extra root bus" OFW fragment, visible at the top,
takes up 2 nodes, after which the longest device-specific patterns (IDE
disk, IDE CD-ROM, ISA floppy, virtio-scsi disk) take 3 more nodes each.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17965 6f19259b-4bc3-4df7-8a09-765794883524
SeaBIOS requires the OpenFirmware device paths exported in the "bootorder"
fw-cfg file to refer to extra (PXB) root buses by their relative positions
(in increasing bus number order) rather than by actual bus numbers.
However, OVMF's PCI host bridge / root bridge driver creates PciRoot(UID)
device path nodes for extra PCI root buses with UID=bus_nr, not position.
(These ACPI devpath UID values must, and do, match the UID values exposed
in QEMU's ACPI payload, generated for PXB root buses.)
Therefore the boot order matching logic will have to map extra root bus
positions to bus numbers. Add a small group of utility functions to help
with that.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17964 6f19259b-4bc3-4df7-8a09-765794883524
QEMU provides an fw_cfg file called "etc/extra-pci-roots", containing a
little-endian UINT64 value that exposes the number of extra root buses. We
can use this value to terminate the scan as soon as we find the last extra
root bus.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17963 6f19259b-4bc3-4df7-8a09-765794883524
In this patch we assume that root bus number 0 is always there (same as
before), and scan the rest of the extra root buses, up to and including
255. When an extra root bus is found, we install the PCI root bridge IO
protocol for the previous root bus (which might be bus 0 or just the
previous extra root bus).
The root bridge protocol created thus will report the available bus number
range
[own bus number, next extra root bus number - 1]
The LHS of this interval will be used for the root bus's own number, and
the rest of the interval (which might encompass 0 additional elements too)
can be used by the PCI bus driver to assign subordinate bus numbers from.
(Subordinate buses are provided by PCI bridges that hang off the root bus
in question.)
For MMIO and IO space allocation, all the root buses share the original
[0x8000_0000, 0xFFFF_FFFF] and [0x0, 0xFFFF] ranges, respectively.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17962 6f19259b-4bc3-4df7-8a09-765794883524
This field was supposed to store the number of root buses created; however
we don't need to keep that count persistently. After the entry point returns,
nothing reads this field.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17961 6f19259b-4bc3-4df7-8a09-765794883524
On output, the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Configuration() function
produces a pointer to a buffer of ACPI 2.0 resource descriptors:
Resources A pointer to the ACPI 2.0 resource descriptors that describe
the current configuration of this PCI root bridge. The
storage for the ACPI 2.0 resource descriptors is allocated by
this function. The caller must treat the return buffer as
read-only data, and the buffer must not be freed by the
caller.
PciHostBridgeDxe currently provides this buffer in a structure with static
storage duration. If multiple root bridges existed in parallel, the
pointers returned by their Configuration() methods would point to the same
static storage. A later Configuration() call would overwrite the storage
pointed out by an earlier Configuration() call (which was possibly made
for a different, but still alive, root bridge.)
Fix this problem by embedding the configuration buffer in
PCI_ROOT_BRIDGE_INSTANCE.
While we're at it, correct some typos (Desp -> Desc), spell out a missing
pack(1) pragma, and improve formatting.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17960 6f19259b-4bc3-4df7-8a09-765794883524
The entry point of the driver, InitializePciHostBridge(), leaks resources
(and installed protocols) in the following cases:
- The first root bridge protocol installation fails. In this case, the
host bridge protocol is left installed, but the driver exits with an
error.
- The second or a later root bridge protocol installation fails. In this
case, the host bridge protocol, and all prior root bridge protocols, are
left installed, even though the driver exits with an error.
Handle errors correctly: roll back / release / uninstall resources when
aborting the driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17959 6f19259b-4bc3-4df7-8a09-765794883524
This new function incorporates the current loop body found in the entry
point function, InitializePciHostBridge(). It will be called once for each
root bus discovered.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17958 6f19259b-4bc3-4df7-8a09-765794883524
Currently we define a device path for each root bridge statically (for all
one of them). Since we'll want to create a dynamic number of root bridges,
replace the static device paths with a common template, embed the actual
device path into the private root bridge structure, and distinguish the
device paths from each other in the UID field (as required by ACPI).
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17957 6f19259b-4bc3-4df7-8a09-765794883524
There is no need to store these constants in dedicated static storage
duration objects; we can simply open-code them, simplifying the code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17956 6f19259b-4bc3-4df7-8a09-765794883524
The entry point function of this driver, InitializePciHostBridge(), and
the static storage duration objects it relies on, are speculatively
generic -- they nominally support more than one host bridges, but (a) the
code hardwires the number of host bridges as 1, (b) it's very unlikely
that we'd ever like to raise that number (especially by open-coding it).
So let's just remove the the nominal support, and simplify the code.
This patch is best viewed with "git show -b".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17955 6f19259b-4bc3-4df7-8a09-765794883524
Currently we only connect the root bus with bus number 0, by device path.
Soon we will possibly have several extra root buses, so connect all root
buses up-front (bus number zero and otherwise), by protocol GUID.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17954 6f19259b-4bc3-4df7-8a09-765794883524
The ASSERT() in SetPciIntLine() assumes that Device 0 on "the" root bus
corresponds to the PCI host bridge (00:00). This used to be true, but
because we're going to have extra root buses (with nonzero bus numbers),
soon this assumption may no longer hold. Check for the zero root bus
number explicitly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17953 6f19259b-4bc3-4df7-8a09-765794883524
These messages are helpful for comparing the assignments made by OVMF
against those made by SeaBIOS. To SeaBIOS a small debug patch like the
following can be applied:
> diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> index ac39d23..9e61c22 100644
> --- a/src/fw/pciinit.c
> +++ b/src/fw/pciinit.c
> @@ -308,8 +308,12 @@ static void pci_bios_init_device(struct pci_device *pci)
>
> /* map the interrupt */
> int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN);
> - if (pin != 0)
> - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci, pin));
> + if (pin != 0) {
> + int irqline = pci_slot_get_irq(pci, pin);
> +
> + pci_config_writeb(bdf, PCI_INTERRUPT_LINE, irqline);
> + dprintf(1, "assigned irq line %d\n", irqline);
> + }
>
> pci_init_device(pci_device_tbl, pci, NULL);
>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17952 6f19259b-4bc3-4df7-8a09-765794883524
The source code is copied verbatim, with the following two exceptions:
- the UNI files are dropped, together with the corresponding UNI
references in the INF file,
- the INF file receives a new FILE_GUID.
The OVMF DSC and FDF files are at once flipped to the cloned driver.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17951 6f19259b-4bc3-4df7-8a09-765794883524
The FileReserved variable in QemuFwCfgFindFile() is only used to skip
over the reserved field in file headers, which causes newer versions of
GCC to flag it with a "variable set but not used" warning (which is normally
not visible since as of right now these warnings are supressed). It's true
that the value read into FileReserved is never used, but this is
intentional. This patch adds a do-nothing reference to silence the
warning.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bill Paul <wpaul@windriver.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17920 6f19259b-4bc3-4df7-8a09-765794883524
Ip4ConfigDxe driver is deprecated in UEFI 2.5, so we will not support original Ip4Config Protocol,
which is replace by Ip4Config2 Protocol integrated in Ip4Dxe driver(git commit 1f6729ff (SVN r17853)).
Therefore we can remove Ip4ConfigDxe driver from this build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17914 6f19259b-4bc3-4df7-8a09-765794883524
PeiCore hang when loads a PEIM whose section alignment requirement is 0x40
but the actual base address is 0x20 aligned.
The issue is caused by the following facts, in order:
1. GCC49 requires the section alignment of .data to be 0x40. So a new link
script gcc4.9-ld-script was added for GCC49 to specify the 0x40
alignment.
2. GenFw tool was enhanced to sync ELF's section alignment to PE header.
Before the enhancement, the section alignment of converted PE image
always equals to 0x20.
If only with #1 change, GCC49 build image won't hang in PeiCore because
the converted PE image still claims 0x20 section alignment which is
aligned to the align setting set in FDF file. But later with #2 change,
the converted PE image starts to claims 0x40 section alignment, while
build tool still puts the PEIM in 0x20 aligned address, resulting the
PeCoffLoaderLoadImage() reports IMAGE_ERROR_INVALID_SECTION_ALIGNMENT
error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17902 6f19259b-4bc3-4df7-8a09-765794883524
The bash binary can be in various locations depending on the system: on Linux
it's in /bin while on BSD it's normally in /usr/local/bin. However, the
env binary is almost always in /usr/bin and so can be used to find and start
the shell.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bruce Cran <bruce@cran.org.uk>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17883 6f19259b-4bc3-4df7-8a09-765794883524
We are preparing for detaching the S3Ready() functionality from the
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we
will hook the same logic to the End-of-Dxe event group.
The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize().
According to the documenation,
This function returns the size of the legacy memory (meaning below 1 MB)
that is required during an S3 resume. Before the Framework-based
firmware transfers control to the OS, it has to transition from flat
mode into real mode in case the OS supplies only a real-mode waking
vector. This transition requires a certain amount of legacy memory.
After getting the size of legacy memory below, the caller is responsible
for allocating the legacy memory below 1 MB according to the size that
is returned. The specific implementation of allocating the legacy memory
is out of the scope of this specification.
When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the
legacy memory allocated above must be passed to it, in the
LegacyMemoryAddress parameter.
In practice however:
- The S3Ready() function ignores the LegacyMemoryAddress completely.
- No code in the edk2 tree calls
EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever.
- All callers of this specific implementation of
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL
LegacyMemoryAddress:
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c]
For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never
called, and that the LegacyMemoryAddress parameter is always NULL.
This fact is important to capture in the code, because in the End-of-Dxe
callback, no LegacyMemoryAddress parameter can be taken. So let's make it
clear that we actually don't even have any use for that parameter.
This patch ports the identical change from IntelFrameworkModulePkg to
OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17806 6f19259b-4bc3-4df7-8a09-765794883524
AuthVariableLib and TpmMeasurementLib library classes are now linked with
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
to optionally support secure variables.
For OvmfPkg,
link AuthVariableLib and DxeTpmMeasurementLib in SecurityPkg
when SECURE_BOOT_ENABLE = TRUE,
and link AuthVariableLibNull and TpmMeasurementLibNull in MdeModulePkg
when SECURE_BOOT_ENABLE = FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17760 6f19259b-4bc3-4df7-8a09-765794883524
At the moment we work with a UC default MTRR type, and set three memory
ranges to WB:
- [0, 640 KB),
- [1 MB, LowerMemorySize),
- [4 GB, 4 GB + UpperMemorySize).
Unfortunately, coverage for the third range can fail with a high
likelihood. If the alignment of the base (ie. 4 GB) and the alignment of
the size (UpperMemorySize) differ, then MtrrLib creates a series of
variable MTRR entries, with power-of-two sized MTRR masks. And, it's
really easy to run out of variable MTRR entries, dependent on the
alignment difference.
This is a problem because a Linux guest will loudly reject any high memory
that is not covered my MTRR.
So, let's follow the inverse pattern (loosely inspired by SeaBIOS):
- flip the MTRR default type to WB,
- set [0, 640 KB) to WB -- fixed MTRRs have precedence over the default
type and variable MTRRs, so we can't avoid this,
- set [640 KB, 1 MB) to UC -- implemented with fixed MTRRs,
- set [LowerMemorySize, 4 GB) to UC -- should succeed with variable MTRRs
more likely than the other scheme (due to less chaotic alignment
differences).
Effects of this patch can be observed by setting DEBUG_CACHE (0x00200000)
in PcdDebugPrintErrorLevel.
Cc: Maoming <maoming.maoming@huawei.com>
Cc: Huangpeng (Peter) <peter.huangpeng@huawei.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Maoming <maoming.maoming@huawei.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17722 6f19259b-4bc3-4df7-8a09-765794883524
Maoming reported that guest memory sizes equal to or larger than 64GB
were not correctly handled by OVMF.
Enabling the DEBUG_GCD (0x00100000) bit in PcdDebugPrintErrorLevel, and
starting QEMU with 64GB guest RAM size, I found the following error in the
OVMF debug log:
> GCD:AddMemorySpace(Base=0000000100000000,Length=0000000F40000000)
> GcdMemoryType = Reserved
> Capabilities = 030000000000000F
> Status = Unsupported
This message is emitted when the DXE core is initializing the memory space
map, processing the "above 4GB" memory resource descriptor HOB that was
created by OVMF's QemuInitializeRam() function (see "UpperMemorySize").
The DXE core's call chain fails in:
CoreInternalAddMemorySpace() [MdeModulePkg/Core/Dxe/Gcd/Gcd.c]
CoreConvertSpace()
//
// Search for the list of descriptors that cover the range BaseAddress
// to BaseAddress+Length
//
CoreSearchGcdMapEntry()
CoreSearchGcdMapEntry() fails because the one entry (with type
"nonexistent") in the initial GCD memory space map is too small, and
cannot be split to cover the memory space range being added:
> GCD:Initial GCD Memory Space Map
> GCDMemType Range Capabilities Attributes
> ========== ================================= ================ ================
> NonExist 0000000000000000-0000000FFFFFFFFF 0000000000000000 0000000000000000
The size of this initial entry is determined from the CPU HOB
(CoreInitializeGcdServices()).
Set the SizeOfMemorySpace field in the CPU HOB to mPhysMemAddressWidth,
which is the narrowest valid value to cover the entire guest RAM.
Reported-by: Maoming <maoming.maoming@huawei.com>
Cc: Maoming <maoming.maoming@huawei.com>
Cc: Huangpeng (Peter) <peter.huangpeng@huawei.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Maoming <maoming.maoming@huawei.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17720 6f19259b-4bc3-4df7-8a09-765794883524
We'll soon increase the maximum guest-physical RAM size supported by OVMF.
For more RAM, the DXE IPL is going to build more page tables, and for that
it's going to need a bigger chunk from the permanent PEI RAM.
Otherwise CreateIdentityMappingPageTables() would fail with:
> DXE IPL Entry
> Loading PEIM at 0x000BFF61000 EntryPoint=0x000BFF61260 DxeCore.efi
> Loading DXE CORE at 0x000BFF61000 EntryPoint=0x000BFF61260
> AllocatePages failed: No 0x40201 Pages is available.
> There is only left 0x3F1F pages memory resource to be allocated.
> ASSERT .../MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c(123):
> BigPageAddress != 0
(The above example belongs to the artificially high, maximal address width
of 52, clamped by the DXE core to 48. The address width of 48 bits
corresponds to 256 TB or RAM, and requires a bit more than 1GB for paging
structures.)
Cc: Maoming <maoming.maoming@huawei.com>
Cc: Huangpeng (Peter) <peter.huangpeng@huawei.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Brian J. Johnson <bjohnson@sgi.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <bjohnson@sgi.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17719 6f19259b-4bc3-4df7-8a09-765794883524
This command was used to convert the file:
iconv -f UTF-16 -t UTF-8 \
-o OvmfPkg/PlatformDxe/Platform.uni \
OvmfPkg/PlatformDxe/Platform.uni
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17700 6f19259b-4bc3-4df7-8a09-765794883524
Qemu commit c5d4dac ("virtio-vga: add virtio gpu device with vga
compatibility") enables OVMF to drive the virtio-vga device:
The vga compatibility part of virtio-vga is identical to the qemu
standard vga, so supporting that is as easy as adding the PCI ID
to the list.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
[lersek@redhat.com: subject fixup and QEMU commit reference in commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17690 6f19259b-4bc3-4df7-8a09-765794883524
Git commit 54753b60 (SVN r16870), "MdeModulePkg: Update SMBIOS revision to
3.0." changed PcdSmbiosVersion from 0x0208 to 0x0300. This controls the
version number of the SMBIOS entry point table (and other things) that
"MdeModulePkg/Universal/SmbiosDxe" installs.
Alas, this change breaks older Linux guests, like RHEL-6 (up to RHEL-6.7);
those are limited to 2.x (both in the guest kernel firmware driver, and in
the dmidecode utility). The SMBIOS 3.0 entry point has a different GUID --
defined in UEFI 2.5 -- pointing to it in the UEFI Configuration Table, and
guest kernels that lack upstream kernel commit e1ccbbc9d5 don't recognize
it.
The v2.1.0+ machine types of QEMU generate SMBIOS payload for the firmware
to install. The payload includes the entry point table ("anchor" table).
OvmfPkg/SmbiosPlatformDxe cannot install the anchor table (because that is
the jurisdiction of the generic "MdeModulePkg/Universal/SmbiosDxe"
driver); however, we can parse the entry point version from QEMU's anchor
table, and instruct "MdeModulePkg/Universal/SmbiosDxe" to adhere to that
version.
On machine types older than v2.1.0, the feature is not available, but
then, should anything in OVMF install SMBIOS tables, version 2.8 is simply
safer / more widely supported than 3.0 -- hence the default 2.8 value for
the dynamic PCD.
We set the PCD in PlatformPei (when not on the S3 resume path), because
that's an easy and certain way to set the PCD before a DXE driver reads
it. This follows the example of PcdEmuVariableNvStoreReserved (which is
read by EmuVariableFvbRuntimeDxe).
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1232876
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17676 6f19259b-4bc3-4df7-8a09-765794883524
This patch initialises root complex register block BAR in order to
support TCO watchdog emulation features (e.g. reboot upon NO_REBOOT bit
not set) on QEMU.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17601 6f19259b-4bc3-4df7-8a09-765794883524
Make HostBridgeDevId global so MemMapInitialization() can also use it to
conditionally add RCRB MMIO address to HOB.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17600 6f19259b-4bc3-4df7-8a09-765794883524
SVN r15305 (git 5a217a06), "OvmfPkg: S3 Suspend: save boot script after
ACPI context", made this driver install gEfiDxeSmmReadyToLockProtocolGuid
in SaveS3BootScript() -- for valid reasons --, however in the INF file the
protocol was marked as "ALWAYS_CONSUMED". Fix it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17437 6f19259b-4bc3-4df7-8a09-765794883524
The PMBA_RTE and ACPI_TIMER_OFFSET macros apply equally to both boards,
plus they are triplicated between the various AcpiTimerLib instances.
Define them centrally in "OvmfPlatforms.h".
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17436 6f19259b-4bc3-4df7-8a09-765794883524
All POWER_MGMT_REGISTER_PIIX4() macro invocations in OvmfPkg should use
the macros in "I440FxPiix4.h" as arguments.
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17435 6f19259b-4bc3-4df7-8a09-765794883524
All POWER_MGMT_REGISTER_Q35() macro invocations in OvmfPkg should use the
macros in "Q35MchIch9.h" as arguments.
Cc: Gabriel Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17434 6f19259b-4bc3-4df7-8a09-765794883524
Define some new macros for register addresses (both PCI and IO) and
register values (bits) that we're going to use soon.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17433 6f19259b-4bc3-4df7-8a09-765794883524
Move platform specific macros to their own include files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17432 6f19259b-4bc3-4df7-8a09-765794883524
When the Q35 machine type(s) of QEMU are used with libvirt, libvirt tends
to place some devices behind PCI bridges. This is then reflected in the
"bootorder" fw_cfg file. For example:
/pci@i0cf8/pci-bridge@1e/pci-bridge@1/scsi@5/disk@0,0
/pci@i0cf8/pci-bridge@1e/pci-bridge@1/scsi@3/channel@0/disk@0,0
As yet QemuBootOrderLib doesn't support such OFW device paths.
Add code that translates a sequence of pci-bridge nodes.
In practice libvirt seems to insert two such nodes (*), hence increment
EXAMINED_OFW_NODES with the same number.
(* Background, paraphrasing Laine Stump's words:
When the machine type is Q35, we create a dmi-to-pci bridge coming off of
the pcie root controller, and a pci-to-pci bridge coming off of that, then
attach most devices to the pci-to-pci bridge. This is done because you
can't hotplug into pcie-root, can't (or at least shouldn't) plug a
pci-to-pci bridge into pcie-root (so the next one has to be
dmi-to-pci-bridge), and can't hotplug into dmi-to-pci-bridge (so you need
to have a pci-to-pci bridge).)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17385 6f19259b-4bc3-4df7-8a09-765794883524
It is the responsibility of the SerialPortLib implementation
to deal with flow control if the underlying medium cannot keep
up with the inflow of data.
So in our SerialPortWrite () function, we should spin as long
as we need to in order to deliver all the data instead of giving
up and returning a smaller value than the number of bytes we were
given. Also, remove the 'if (Sent > 0)' condition on the signalling
of the event channel: if the buffer is full and we haven't been able
to add any more data, it makes perfect sense to signal the event
channel again, even if we have done so before when we did write
the data.
Also, this patch brings the implementation of XenSerialPortLib
in sync with the library class documentation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: replace DebugLib dependency with open-coded ASSERT()]
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17079 6f19259b-4bc3-4df7-8a09-765794883524
On PIIX4, function 3, the PMREGMISC register at offset 0x80, with
default value 0x00 has its bit 0 (PMIOSE) indicate whether the PM
IO space given in the PMBA register (offset 0x40) is enabled.
PMBA must be configured *before* setting this bit.
On Q35/ICH9+, function 0x1f, the equivalent role is fulfilled by
bit 7 (ACPI_EN) in the ACPI Control Register (ACPI_CNTL) at offset
0x44, also with a default value of 0x00.
Currently, OVMF hangs when Q35 reboots, because while PMBA is reset
by QEMU, the register at offset 0x80 (matching PMREGMISC on PIIX4)
is not reset, since it has a completely different meaning on LPC.
As such, the power management initialization logic in OVMF finds
the "PMIOSE" bit enabled after a reboot and decides to skip setting
PMBA. This causes the ACPI timer tick routine to read a constant
value from the wrong register, which in turn causes the ACPI delay
loop to hang indefinitely.
This patch modifies the Base[Rom]AcpiTimerLib constructors and the
PlatformPei ACPI PM init routines to use ACPI_CNTL:ACPI_EN instead
of PMREGMISC:PMIOSE when running on Q35.
Reported-by: Reza Jelveh <reza.jelveh@tuhh.de>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17076 6f19259b-4bc3-4df7-8a09-765794883524
QEMU commit aa685789 ("xhci: generate a Transfer Event for each Transfer
TRB with the IOC bit set") fixed an emulation problem in QEMU; we can now
drive that host controller with edk2's XhciDxe. Include it in OvmfPkg, as
XHCI emulation is reportedly more virtualization-friendly than EHCI,
consuming less CPU.
The driver can be tested with the following QEMU command line options:
-device nec-usb-xhci -device usb-kbd
This patch should not regress existing QEMU command lines (ie. trigger an
ASSERT() in XhciDxe that fails on pre-aa685789 QEMU) because QEMU's
"-device nec-usb-xhci" has never before resulted in USB devices that
worked with edk2 firmware builds, hence users have never had a reason to
add that option.
Now that they learn about XHCI support in OVMF by reading this commit
message, they (or their packagers) will also know to update qemu to
aa685789 or later (in practice that means the upcoming 2.3 release), at
least if they want to use '-device nec-usb-xhci' with edk2, for the first
time ever.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Alexander Graf <agraf@suse.de>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17055 6f19259b-4bc3-4df7-8a09-765794883524
XenHypercallLib has two clients at the moment: XenBusDxe and
XenConsoleSerialPortLib. Currently, when XenBusDxe starts on a non-Xen X86
platform (ie. as part of OVMF not running on Xen), the X86XenHypercallLib
instance built into it fails to initialize, which triggers an ASSERT() in
auto-generated code.
Instead, let's call XenHypercallIsAvailable() in the driver's entry point,
and exit cleanly when the driver is started on a non-Xen platform.
Modify the constructor of XenConsoleSerialPortLib similarly; we shouldn't
proceed if Xen is not available. In practice this check should never fail,
because XenConsoleSerialPortLib is only used on ARM, and
ArmXenHypercallLib is always available; but nonetheless we should be
pedantic.
Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17001 6f19259b-4bc3-4df7-8a09-765794883524
Similarly to QemuFwCfgLib, we prefer mellow library construction code and
an explicit "are you available" query function in the XenHypercallLib
class. In this step we introduce that query function, but move no client
code to it yet.
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17000 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add a simple query function to the XenHypercallLib
library class that is supposed to be called by initialization code in
modules. Among those, in constructors of dependent libraries too.
Library construction ordering is ensured only between libraries with
constructors, plus we shouldn't allow a dependent library with a
constructor to call into any XenHypercallLib instances (the simple query
function) before XenHypercallLib is constructed itself. For this reason,
introduce an (empty) constructor for ARM & AARCH64 too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16999 6f19259b-4bc3-4df7-8a09-765794883524
Perform the following renames in order to stick with edk2 tradition more
closely:
XenHypercallLibArm, XenHypercallLibIntel -> XenHypercallLib
XenHypercallIntel -> X86XenHypercall
In addition, we unify the INF files.
This patch modifies ArmVirtualizationPkg and OvmfPkg at once, in order to
keep both bisectable (client code shouldn't break).
Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16998 6f19259b-4bc3-4df7-8a09-765794883524
This adds a XenIoMmioLib declaration and implementation that can
be invoked to install the XENIO_PROTOCOL and a corresponding
grant table address on a EFI handle.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16979 6f19259b-4bc3-4df7-8a09-765794883524
On non-PCI Xen guests (such as ARM), the XenBus root is not a PCI
device but an abstract 'platform' device. Add a dedicated Vendor
Hardware device path GUID to identify this node.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16978 6f19259b-4bc3-4df7-8a09-765794883524
This implements a SerialPortLib instance that wires up to the
PV console ring used by domU guests. Also imports the required
upstream Xen io/console.h header.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16976 6f19259b-4bc3-4df7-8a09-765794883524
This patch updates XenBusDxe to use the 16-bit compare and exchange
function that was introduced for this purpose to the
BaseSynchronizationLib. It also provides a new generic implementation
of TestAndClearBit () using the same 16-bit compare and exchange, making
this module fully architecture agnostic.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16975 6f19259b-4bc3-4df7-8a09-765794883524
This patch adds an implementation of XenHypercallLib for both
AArch64 and AArch32 execution modes on ARM systems.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16974 6f19259b-4bc3-4df7-8a09-765794883524
While Xen on Intel uses a virtual PCI device to communicate the
base address of the grant table, the ARM implementation uses a DT
node, which is fundamentally incompatible with the way XenBusDxe is
implemented, i.e., as a UEFI Driver Model implementation for a PCI
device.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16973 6f19259b-4bc3-4df7-8a09-765794883524
Prepare for making XenBusDxe suitable for use with non-PCI devices
(such as the DT node exposed by Xen on ARM) by introducing a separate
DXE driver that binds to the Xen virtual PCI device and exposes the
abstract XENIO_PROTOCOL for XenBusDxe to bind against.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16972 6f19259b-4bc3-4df7-8a09-765794883524
This introduces the abstract XENIO_PROTOCOL that will be used to
communicate the Xen grant table address to drivers supporting this
protocol. Primary purpose is allowing us to change the XenBusDxe
implementation so that it can support non-PCI Xen implementations
such as Xen on ARM.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16971 6f19259b-4bc3-4df7-8a09-765794883524
This moves all of the Xen hypercall code that was private to XenBusDxe
to a new library class XenHypercallLib. This will allow us to reimplement
it for ARM, and to export the Xen hypercall functionality to other parts
of the code, such as a Xen console SerialPortLib driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16970 6f19259b-4bc3-4df7-8a09-765794883524
This refactors the Xen hypercall implementation that is part of the
XenBusDxe driver, in preparation of splitting it off entirely into
a XenHypercallLib library. This involves:
- removing the dependency on XENBUS_DEVICE* pointers in the XenHypercall()
prototypes
- moving the discovered hyperpage address to a global variable
- moving XenGetSharedInfoPage() to its only user XenBusDxe.c (the shared info
page is not strictly part of the Xen hypercall interface, and is not used
by other expected users of XenHypercallLib such as the Xen console version
of SerialPortLib
- reimplement XenHypercall2() in C and move the indexing of the hyperpage
there; the existing asm implementations are renamed to __XenHypercall2() and
invoked from the new C implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16969 6f19259b-4bc3-4df7-8a09-765794883524
On ARM, xen_pfn_t is 64 bits but the size of a pointer is only
32 bits, so casting between them needs to go via (UINTN). Also
move the xen_pfn_t cast outside the shift so that we can avoid
shifting 64-bit quantities on 32-bit architectures, which may
require runtime library support.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16968 6f19259b-4bc3-4df7-8a09-765794883524
Tiancore has its private copy of the Xen headers, and all drivers
that depend on it should use the same Xen interface version, so
let's move the #define to xen.h itself.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16967 6f19259b-4bc3-4df7-8a09-765794883524
The only feature not portable to ArmVirtualizationQemu is the VBE shim;
make that dependent on Ia32 / X64.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Olivier Martin <Olivier.martin@arm.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16890 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16411 delayed ACPI table installation until PCI enumeration was
complete, because on QEMU the ACPI-related fw_cfg files should have been
downloaded only after PCI enumeration. Said commit implemented the
dependency by tightening the module's depex.
This patch replaces the EFI_PCI_ENUMERATION_COMPLETE_PROTOCOL depex with a
matching protocol registration callback. The depex was static, and it
could not handle dynamically discovered situations when the dependency
would turn out invalid.
Namely:
- At the moment, the depex in "QemuFwCfgAcpiPlatformDxe.inf" assumes
that "ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc"
lacks PCI support. However, PCI support is about to become run-time
discoverable on that platform. If PCI support is missing, then
ArmVirtualizationPkg will set PcdPciDisableBusEnumeration to TRUE.
Hence, when PcdPciDisableBusEnumeration is TRUE, we invalidate the
dependency by not registering the callback and installing the ACPI
tables right away.
- InitializeXen() in "OvmfPkg/PlatformPei/Xen.c" sets
PcdPciDisableBusEnumeration to TRUE. This causes
PciBusDriverBindingStart() in "MdeModulePkg/Bus/Pci/PciBusDxe/PciBus.c"
to set gFullEnumeration to FALSE, which in turn makes PciEnumerator() in
"MdeModulePkg/Bus/Pci/PciBusDxe/PciEnumerator.c" branch to
PciEnumeratorLight(). The installation of
EFI_PCI_ENUMERATION_COMPLETE_PROTOCOL at the end of PciEnumerator() is
not reached.
Which means that starting with SVN r16411, AcpiPlatformDxe is never
dispatched on Xen.
Hence, when PcdPciDisableBusEnumeration is TRUE, we invalidate the
dependency by not registering the callback and installing the ACPI
tables right away.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Removed PcdOvmfPciEnabled]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16887 6f19259b-4bc3-4df7-8a09-765794883524
Currently the entry point functions of both driver builds
(AcpiPlatformDxe.inf and QemuFwCfgAcpiPlatformDxe.inf) directly contain
the logic that is different between the two builds.
Because we're going to restructure the entry point logic soon, we'd have
to duplicate the same new code between both entry point functions.
Push down the logic in which they differ to a new function:
- InstallAcpiTables() [AcpiPlatform.c]
- InstallAcpiTables() [QemuFwCfgAcpiPlatform.c]
and extract a common entry point function:
- AcpiPlatformEntryPoint() [EntryPoint.c]
which we can soon modify without code duplication.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16885 6f19259b-4bc3-4df7-8a09-765794883524
This name better aligns with InstallXenTables and InstallOvmfFvTables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16884 6f19259b-4bc3-4df7-8a09-765794883524
Since this function also installs the tables, this is a better
name. It also aligns with the InstallXenTables name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16883 6f19259b-4bc3-4df7-8a09-765794883524
Since the protocol is in the depex, there is no reason to expect we
might fail to locate the protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16882 6f19259b-4bc3-4df7-8a09-765794883524
Having this entry point in QemuFwCfgAcpi.c should not cause a problem
for the other driver which supports Xen and older QEMU versions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16880 6f19259b-4bc3-4df7-8a09-765794883524
Update OS Major number checking to future proof it, and default to
XCODE5 (clang + lldb).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16879 6f19259b-4bc3-4df7-8a09-765794883524
Before we launch the QEMU kernel, we should signal the ReadyToBoot
event.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16878 6f19259b-4bc3-4df7-8a09-765794883524
Insert a default, OVMF-specific Type 0 (BIOS Information) structure
into the SMBIOS table, unless the underlying guest VM supplies its
own, overriding instance.
As an example, QEMU, while allowing the user to specifically force
generation of a Type 0 structure, will not generate one by default,
considering that task to be the responsibility of the BIOS itself.
Based on an earlier out-of-tree patch by Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16868 6f19259b-4bc3-4df7-8a09-765794883524
Implement new API DebugPrintLevelEnabled() to base on PCD PcdFixedDebugPrintErrorLevel.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16797 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
The code left behind in Qemu.c has some PCAT dependencies, and might
not be able to build on all platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16696 6f19259b-4bc3-4df7-8a09-765794883524
The QEMU command line option
-boot menu=on
is meant to have the guest firmware wait for a firmware-specific interval
for the user to enter the boot menu. During the wait, the user can opt to
enter the boot menu, or interrupt the wait and proceed to booting at once.
If the wait interval elapses, the firmware should boot as it normally
would.
The QEMU command line option
-boot menu=on,splash-time=N
means the same, except the firmware should wait for cca. N milliseconds
instead of a firmware-specific interval.
We can approximate this behavior quite well for edk2's virtual platforms
because the Intel BDS front page already supports a progress bar, with
semantics similar to the above. Let's distill the fw_cfg bits underlying
"-boot menu=on,splash-time=N" for the BDS policies, in the form of a
timeout value they can pass to Intel's PlatformBdsEnterFrontPage().
If the boot menu is not requested, we return
"gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPlatformBootTimeOut", which
is what the virtual platforms use right now.
If the boot menu is requested without specifying the timeout, we return
the same PCD, unless it would cause us to skip the boot menu at once. In
the latter case, we return 3 seconds (as an approximation of the 2500 ms
SeaBIOS default.)
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1170507
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Olivier Martin <Olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16610 6f19259b-4bc3-4df7-8a09-765794883524
Move libraries from ShellPkg into MdeModulePkg and MdePkg.
The following libraries are being migrated out of ShellPkg in order to make
their functionality more widely available.
• PathLib: Incorporate into MdePkg/Library/BaseLib
• FileHandleLib: MdePkg/Library/UefiFileHandleLib
• BaseSortLib: MdeModulePkg/Library/BaseSortLib
• UefiSortLib: MdeModulePkg/Library/UefiSortLib
Diffs showing file changes are in the attached file, LibMigration.patch.
A description of the changes follows:
• Move ShellPkg/Include/Library/FileHandleLib.h to MdePkg/Include/Library/FileHandleLib.h
• Move ShellPkg/Include/Library/SortLib.h to MdeModulePkg/Include/Library/SortLib.h
• Move ShellPkg/Library/BaseSortLib to MdeModulePkg/Library/BaseSortLib
• Move ShellPkg/Library/UefiSortLib to MdeModulePkg/Library/UefiSortLib
• Move ShellPkg/Library/BasePathLib/BasePathLib.c to MdePkg/Library/BaseLib/FilePaths.c
• Merge ShellPkg/Include/Library/PathLib.h into MdePkg/Include/Library/BaseLib.h
• Delete ShellPkg/Library/BasePathLib; Includes BasePathLib.c and BasePathLib.inf
• NetworkPkg/NetworkPkg.dsc
• PerformancePkg.dsc
• OvmfPkg/OvmfPkgX64.dsc
• OvmfPkg/OvmfPkgIa32X64.dsc
• OvmfPkg/OvmfPkgIa32.dsc
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
• MdeModulePkg/MdeModulePkg.dec
o Add SortLib library class
• MdePkg/MdePkg.dec
o Add FileHandleLib library class
o Add PcdUefiFileHandleLibPrintBufferSize PCD
• MdePkg/Library/BaseLib/BaseLib.inf
o Add FilePaths.c to [Sources]
• MdePkg/Include/Library/BaseLib.h
o Update file description to include "file path functions"
• ShellPkg/ShellPkg.dsc
o Change PACKAGE_GUID to { C1014BB7-4092-43D4-984F-0738EB424DBF }
o Update PACKAGE_VERSION to 1.0
o Update SortLib and FileHandleLib library classes to point to the new library locations.
o Remove PathLib library class and make sure that BaseLib is described.
o Remove ShellPkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf from [Components]
• ShellPkg/ShellPkg.dec
o Update PLATFORM_VERSION to 1.0
o Remove declarations of the FileHandleLib, SortLib, and PathLib Library Classes
o Update comment for the PcdShellPrintBufferSize PCD.
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
• ShellPkg/Application/Shell/Shell.inf
o Remove PathLib from [LibraryClasses]
• ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.h
• ShellPkg/Application/Shell/Shell.h
o Remove #include <Library/PathLib.h>
• ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
o Add PathLib to [LibraryClasses]
• ShellPkg/Library/UefiShellLevel1CommandsLib/If.c
o Remove #include <Library/PathLib.h>
• ShellPkg/Application/ShellSortTestApp/ShellSortTestApp.inf
o Add MdeModulePkg/MdeModulePkg.dec to [Packages]
• MdeModulePkg/Library/BaseSortLib/BaseSortLib.inf
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
o Replace ShellPkg.dec with MdeModulePkg.dec in [Packages]
• MdeModulePkg/Library/UefiSortLib/UefiSortLib.c
o Remove #include <ShellBase.h>
o Define USL_FREE_NON_NULL() to replace SHELL_FREE_NON_NULL()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16601 6f19259b-4bc3-4df7-8a09-765794883524
The TranslateMmioOfwNodes() function recognizes the following OpenFirmware
device paths:
virtio-blk: /virtio-mmio@000000000a003c00/disk@0,0
virtio-scsi disk: /virtio-mmio@000000000a003a00/channel@0/disk@2,3
virtio-net NIC: /virtio-mmio@000000000a003e00/ethernet-phy@0
The new translation can be enabled with the
"PcdQemuBootOrderMmioTranslation" Feature PCD. This PCD also controls if
the "survival policy" covers unselected boot options that start with the
virtio-mmio VenHw() node.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16575 6f19259b-4bc3-4df7-8a09-765794883524
The OpenFirmware device path nodes that QEMU generates for virtio-mmio
transports contain 64-bit hexadecimal values (16 nibbles) -- the base
addresses of the register blocks. In order to parse them soon,
ParseUnitAddressHexList() must parse UINT64 values.
Call sites need to be adapted, as expected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16574 6f19259b-4bc3-4df7-8a09-765794883524
Soon there will be more than one modules (in separate packages) that need
to have an understanding about the GUID used in the VenHw() device path
nodes that describe virtio-mmio transports. Define such a GUID explicitly.
Preserve the current value (which happens to be the FILE_GUID of
ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf) for
compatibility with external users.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16572 6f19259b-4bc3-4df7-8a09-765794883524
In preparation for adding OpenFirmware-to-UEFI translation for "MMIO-like"
OFW device path fragments, let's turn the currently exclusive "PCI-like"
translation into "just one" of the possible translations.
- Rename TranslateOfwNodes() to TranslatePciOfwNodes(), because it is
tightly coupled to "PCI-like" translations.
- Rename REQUIRED_OFW_NODES to REQUIRED_PCI_OFW_NODES, because this macro
is specific to TranslatePciOfwNodes().
- Introduce a new wrapper function under the original TranslateOfwNodes()
name. This function is supposed to try translations in some order until
a specific translation returns a status different from
RETURN_UNSUPPORTED.
- Introduce a new Feature PCD that controls whether PCI translation is
attempted at all.
- The boot option "survival policy" in BootOrderComplete() must take into
account if the user was able to select PCI-like boot options. If the
user had no such possibility (because the Feature PCD was off for
PCI-like translation), then we ought to keep any such unselected boot
options.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16571 6f19259b-4bc3-4df7-8a09-765794883524
and rebase OvmfPkg's PlatformBdsLib on the standalone library.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16570 6f19259b-4bc3-4df7-8a09-765794883524
There are several network stack drivers in MdeModulePkg or NetworkPkg.
Currently, we only use the drivers from MdeModulePkg which only provides
the IPv4 support. This commit adds the IPv6 drivers in NetworkPkg into
OVMF.
Here is the table of drivers from Laszlo.
currently included related driver add or replace
from MdeModulePkg in NetworkPkg from NetworkPkg
------------------ -------------- ---------------
SnpDxe n/a n/a
DpcDxe n/a n/a
MnpDxe n/a n/a
VlanConfigDxe n/a n/a
ArpDxe n/a n/a
Dhcp4Dxe Dhcp6Dxe add
Ip4ConfigDxe Ip6Dxe add
Ip4Dxe Ip6Dxe add
Mtftp4Dxe Mtftp6Dxe add
Tcp4Dxe TcpDxe replace
Udp4Dxe Udp6Dxe add
UefiPxeBcDxe UefiPxeBcDxe replace
IScsiDxe IScsiDxe replace
Since the TcpDxe, UefiPxeBcDxe, and IScsiDxe drivers in NetworkPkg also
support IPv4, we replace the ones in MdeModulePkg.
To enable the IPv6 support, build OVMF with "-D NETWORK_IP6_ENABLE".
A special case is NetworkPkg/IScsiDxe. It requires openssl. For convenience,
NetworkPkg/IScsiDxe is enabled only if both IPv6 and SecureBoot are enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
[lersek@redhat.com: typo fix in commit message; specil -> special]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16543 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16375 (git commit 72a11001, "OvmfPkg: CsmSupportLib: Set/use platform
specific legacy interrupt device") added the
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfHostBridgePciDevId
PCD to CsmSupportLib. Since that "namespace" GUID is declared in
OvmfPkg/OvmfPkg.dec, and we've not used anything from OvmfPkg/OvmfPkg.dec
in CsmSupportLib.inf thus far, this is a new [Packages] dependency and
must be named.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16414 6f19259b-4bc3-4df7-8a09-765794883524
The ACPI payload that OVMF downloads from QEMU via fw_cfg depends on the
PCI enumaration and resource assignment performed by
MdeModulePkg/Bus/Pci/PciBusDxe.
Namely, although the ACPI payload is pre-generated in qemu during machine
initialization, in
main() [vl.c]
qemu_run_machine_init_done_notifiers()
pc_guest_info_machine_done() [hw/i386/pc.c]
acpi_setup() [hw/i386/acpi-build.c]
acpi_build()
acpi_add_rom_blob()
rom_add_blob(... acpi_build_update ...) [hw/core/loader.c]
fw_cfg_add_file_callback() [hw/nvram/fw_cfg.c]
the ACPI data is rebuilt at the first time any of the related fw_cfg files
are read, through the acpi_build_update() fw_cfg read-callback function:
fw_cfg_read() [hw/nvram/fw_cfg.c]
acpi_build_update() [hw/i386/acpi-build.c]
acpi_build()
(See qemu commit d87072ceeccf4f84a64d4bc59124bcd64286c070 and its
containing series.)
For this reason we must not dispatch AcpiPlatformDxe before PciBusDxe
completes the enumeration.
Luckily, the PI Specification 1.3 defines
EFI_PCI_ENUMERATION_COMPLETE_GUID in Volume 5, "10.9 End of PCI
Enumeration Overview", as an indicia to inform the platform when the PCI
enumeration process has completed. PciBusDxe installs this protocol at the
end of the PciEnumerator() function.
Let's add this GUID to the Depex section of AcpiPlatformDxe, in order to
state the dependency explicitly.
On Xen, and on older QEMU where the linker/loader fw_cfg interface is
unavailable, this introduces a harmless ordering constraint -- we'll
always include PciBusDxe in OVMF, so the dependency will always be
satisfied.
I tested this change as follows:
- I dumped the ACPI tables in a Fedora 20 guest, before and after the
change, and compared them. The only thing that actually changed was the
FACS address. (Which I promptly tested with S3 suspend/resume.) Plus, of
course, the FACP checksum changed, because the FACP links the FACS.
- Tested S3 in my Windows Server 2008 R2 and Windows Server 2012 R2 guests.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16411 6f19259b-4bc3-4df7-8a09-765794883524
Remove hard-coded list of PCI devices for which the Interrupt Line
register is initialized. Instead, provide a "visitor" function to
initialize the register only for present and applicable PCI devices.
At this time, we match the behavior of SeaBIOS (file src/fw/pciinit.c,
functions *_pci_slot_get_irq() and "map the interrupt" block from
pci_bios_init_device()).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16398 6f19259b-4bc3-4df7-8a09-765794883524
The fix, having "lock" and the locked instruction on the same line in
the source.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16394 6f19259b-4bc3-4df7-8a09-765794883524
This patch contain type casts and replace one * operation by a
MultU64x32() call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16393 6f19259b-4bc3-4df7-8a09-765794883524
This patch contain only type cast.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16392 6f19259b-4bc3-4df7-8a09-765794883524
This patch replace some types in GrantTable and the argument Index of
XenHypercallHvmGetParam to what the types should be.
This avoid to have type cast in code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16391 6f19259b-4bc3-4df7-8a09-765794883524
Since a message to XenStore have a lenght of type UINT32, have
XenStore.c deal only with UINT32 instead of a mixmatch with UINTN.
This patch replaces the type of Len in WRITE_REQUEST and the type of the
argument Len of XenStoreWriteStore and XenStoreReadStore.
This patch should avoid to have type cast were it does not make sense to
have them.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16390 6f19259b-4bc3-4df7-8a09-765794883524
"Lun" has type UINT64 in this function. The result of the expression
(UINT8) ((Lun >> 8) | 0x40)
depends only on bits [15:8] of "Lun", therefore we can cast "Lun" to
UINT32 before shifting it.
This eliminates an intrinsic when building with VS2010 for Ia32 / NOOPT.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
[lersek@redhat.com: added commit message]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16386 6f19259b-4bc3-4df7-8a09-765794883524
The SegmentC local variable has type EFI_PHYSICAL_ADDRESS for (justified)
style reasons. However, the 64-bit bit-shifts that it undergoes result in
intrinsic calls when built with VS2010 for Ia32 / NOOPT.
The concrete value of SegmentC, 0xC0000, and the results of the bitops
that are based on it, are statically computeable. Cast SegmentC to UINT32
before subjecting it to bitwise operations; we can see in advance that
this won't lead to range loss.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
[lersek@redhat.com: dropped now superfluous outermost parens; commit msg]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16385 6f19259b-4bc3-4df7-8a09-765794883524
The current types of subexpressions used in QemuFlashPtr() are as follows.
(We also show the types of "larger" subexpressions, according to operator
binding.)
mFlashBase + (Lba * mFdBlockSize) + Offset
^ ^ ^ ^
| | | |
(UINT8*) EFI_LBA UINTN UINTN
(UINT64)
--------------------------------- ------
(UINT8*) UINTN
------------------------------------------
(UINT8*)
When building with VS2010 for Ia32 / NOOPT, the 64-by-32 bit
multiplication is translated to an intrinsic, which is not allowed in
edk2.
Recognize that "Lba" is always bounded by "mFdBlockCount" (an UINTN) here
-- all callers of QemuFlashPtr() ensure that. In addition, the flash chip
in question is always under 4GB, which is why we can address it at all on
Ia32. Narrow "Lba" to UINTN, without any loss of range.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
[commit message by lersek@redhat.com]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16384 6f19259b-4bc3-4df7-8a09-765794883524
In the InitializeVariableFvHeader() function, all three of "Offset",
"Start" and "BlockSize" have type UINTN. Therefore the (Offset /
BlockSize) and (Start / BlockSize) divisions can be compiled on all
platforms without intrinsics.
In the current expressions
(EFI_LBA) Offset / BlockSize
(EFI_LBA) Start / BlockSize
"Offset" and "Start" are cast to UINT64 (== EFI_LBA), which leads to
64-by-32 bit divisions on Ia32, breaking the VS2010 / NOOPT / Ia32 build.
The simplest way to fix them is to realize we don't need casts at all.
(The prototypes of QemuFlashEraseBlock() and QemuFlashWrite() are visible
via "QemuFlash.h", and they will easily take our UINTN quotients as
UINT64.)
Suggested-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16383 6f19259b-4bc3-4df7-8a09-765794883524
The MarkMemoryRangeForRuntimeAccess() function passes the Length parameter
(of type UINT64) to the macro EFI_SIZE_TO_PAGES(). When building for the
Ia32 platform, this violates the interface contract of the macro:
[...] Passing in a parameter that is larger than UINTN may produce
unexpected results.
In addition, it trips up compilation by VS2010 for the Ia32 platform and
the NOOPT target -- it generates calls to intrinsics, which are not
allowed in edk2.
Fix both issues with the following steps:
(1) Demote the Length parameter of MarkMemoryRangeForRuntimeAccess() to
UINTN. Even a UINT32 value is plenty for representing the size of the
flash chip holding the variable store. Length parameter is used in the
following contexts:
- passed to gDS->RemoveMemorySpace() -- takes an UINT64
- passed to gDS->AddMemorySpace() -- ditto
- passed to EFI_SIZE_TO_PAGES() -- requires an UINTN. This also guarantees
that the return type of EFI_SIZE_TO_PAGES() will be UINTN, hence we can
drop the outer cast.
(2) The only caller of MarkMemoryRangeForRuntimeAccess() is
FvbInitialize(). The latter function populates the local Length variable
(passed to MarkMemoryRangeForRuntimeAccess()) from
PcdGet32(PcdOvmfFirmwareFdSize). Therefore we can simply demote the local
variable to UINTN in this function as well.
- There's only one other use of Length in FvbInitialize(): it is passed to
GetFvbInfo(). GetFvbInfo() takes an UINT64, so passing an UINTN is fine.
Suggested-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Build-tested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16382 6f19259b-4bc3-4df7-8a09-765794883524
Merge PciInitialization() and AcpiInitialization() into a single
function, PciAcpiInitialization(), and use a PCD set during PEI to
detect the underlying platform type (PIIX4 or Q35/MCH) and therefore
the addresses of the registers to be initialized.
Add LNK[A-H] routing target initialization for the Q35 platform.
Additionally, initialize PCI_INTERRUPT_LINE registers for the typical
set of PCI devices included by QEMU with the Q35 machine type. The
corresponding PIIX4 initialization of PCI_INTERRUPT_LINE registers is
cleaned up and the list of PIIX4 PCI devices updated to the list
typically included with QEMU.
NOTE: The list of PCI devices for which we initialize PCI_INTERRUPT_LINE
is hard-coded, and, depending on how QEMU devices are configured on
the command line, may miss some devices, or (harmlessly) attempt to
initialize devices which are not present in the system. A subsequent
patch will replace this hard-coded list with a mechanism to correctly
initialize PCI_INTERRUPT_LINE for applicable present PCI devices only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16379 6f19259b-4bc3-4df7-8a09-765794883524
Link DXE_SMM_DRIVER, UEFI_DRIVER, UEFI_APPLICATION, and SMM_CORE against
a valid, non-asserting version of PcdLib, then switch them over to using
the "Dxe" instance of AcpiTimerLib (instead of the "Base" version).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16378 6f19259b-4bc3-4df7-8a09-765794883524
Since in OVMF both PEI_CORE and PEIM run from RAM, and thus may
utilize global variables, use the "Base" AcpiTimerLib instance
(instead of BaseRom) to take advantage of the improved efficiency
of storing the timer register IO address in a global variable.
This leaves only SEC using the BaseRomAcpiTimerLib instance.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16377 6f19259b-4bc3-4df7-8a09-765794883524
Remove local power management register access macros in favor of
factored-out ones in OvmfPkg/Include/OvmfPlatforms.h
Next, AcpiTimerLib is split out into three instances, for use during
various stages:
- BaseRom: used during SEC, PEI_CORE, and PEIM;
- Dxe: used during DXE_DRIVER and DXE_RUNTIME_DRIVER;
- Base: used by default during all other stages.
Most of the code remains in AcpiTimerLib.c, to be shared by all
instances. The two platform-dependent methods (constructor and
InternalAcpiGetTimerTick) are provided separately by source files
specific to each instance, namely [BaseRom|Base|Dxe]AcpiTimerLib.c.
Since pre-DXE stages can't rely on storing data in global variables,
methods specific to the "BaseRom" instance will call platform
detection macros each time they're invoked.
The "Base" instance calls platform detection macros only from its
constructor, and caches the address required by InternalAcpiTimerTick
in a global variable.
The "Dxe" instance is very similar to "Base", except no platform
detection macros are called at all; instead, the platform type is
read via a dynamic PCD set from PlatformPei.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16376 6f19259b-4bc3-4df7-8a09-765794883524
Use a PCD set from PEI to determine the legacy interrupt device
number appropriate for the underlying platform type during protocol
initialization.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16375 6f19259b-4bc3-4df7-8a09-765794883524
Set from PEI, this PCD allows subsequent stages (specifically
DXE_DRIVER and DXE_RUNTIME_DRIVER) to infer the underlying platform
type (e.g. PIIX4 or Q35/MCH) without the need to further query the
Host Bridge for its Device ID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16374 6f19259b-4bc3-4df7-8a09-765794883524
Set up ACPI power management using registers determined based on
the underlying (PIIX4 or Q35/MCH) platform type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16373 6f19259b-4bc3-4df7-8a09-765794883524
Introduce macros to detect the underlying platform and access its
ACPI power management registers, based on querying the host bridge
device ID.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16372 6f19259b-4bc3-4df7-8a09-765794883524
EDK II code should not include system include files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16341 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/TestAndClearBit.asm to X64/TestAndClearBit.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16319 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/InterlockedCompareExchange16.asm to X64/InterlockedCompareExchange16.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16318 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/hypercall.asm to X64/hypercall.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16317 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/TestAndClearBit.asm to Ia32/TestAndClearBit.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16316 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/InterlockedCompareExchange16.asm to Ia32/InterlockedCompareExchange16.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16315 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/hypercall.asm to Ia32/hypercall.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16314 6f19259b-4bc3-4df7-8a09-765794883524
On a physical screen such a low graphics resolution would lead to huge
glyphs (the text resolution is 80x25, centered, with 8x19 pixel glyphs).
But in a virtual machine it just saves screen real estate on the client,
by removing the black bands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16311 6f19259b-4bc3-4df7-8a09-765794883524
PlatformBdsEnterFrontPage() already implements a keypress wait (for
entering the setup utility at boot) with a nice progress bar, only OVMF
has not been using it.
Removing our custom code and utilizing PlatformBdsEnterFrontPage()'s
builtin wait has the following benefits:
- It simplifies OVMF's BDS code.
- Because now we call PlatformBdsEnterFrontPage() unconditionally, it
actually has a chance to look at the EFI_OS_INDICATIONS_BOOT_TO_FW_UI
bit of the "OsIndications" variable, improving compliance with the UEFI
specification. References:
- https://bugzilla.redhat.com/show_bug.cgi?id=1153927
- http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10487
- The progress bar looks nice. (And it keeps the earlier behavior intact,
when the user presses a key on the TianoCore splash screen.)
In any case, we set the timeout to 0 (which doesn't show the progress
bar and proceeds to the boot options immediately) in order to keep the
boot time down.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16310 6f19259b-4bc3-4df7-8a09-765794883524
This is again obviated by our earlier BdsLibConnectAll() call.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16309 6f19259b-4bc3-4df7-8a09-765794883524
The second parameter of said function is "ConnectAllHappened", and if set
to TRUE, the function sets "gConnectAllHappened" to TRUE.
This global variable in turn controls whether Intel BDS code *itself*
calls BdsLibConnectAllDriversToAllControllers() in various places -- if
the indicator is TRUE, then the "connect all" is assumed to have been
performed, and Intel BDS doesn't do it itself.
OVMF should pass TRUE as "ConnectAllHappened", because a few lines before
our call to PlatformBdsEnterFrontPage(), we already connect everything
with BdsLibConnectAll(), which includes the effects of
BdsLibConnectAllDriversToAllControllers():
PlatformBdsPolicyBehavior() [OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c]
BdsLibConnectAll() [IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConnect.c]
BdsLibConnectAllDriversToAllControllers()
PlatformBdsEnterFrontPage() [IntelFrameworkModulePkg/Universal/BdsDxe/FrontPage.c]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16308 6f19259b-4bc3-4df7-8a09-765794883524
The PlatformBdsEnterFrontPage() function's first parameter,
"TimeoutDefault", determines the behavior of the setup utility:
- If (TimeoutDefault == 0), then the usual boot order is to be acted upon
immediately.
- If (TimeoutDefault == 0xFFFF), then the setup utility is entered
unconditionally.
- If (0 < TimeoutDefault && TimeoutDefault < 0xFFFF), then the
PlatformBdsEnterFrontPage() function displays a progress bar, waiting
for TimeoutDefault seconds. If the user presses a key, then the setup
utility is entered, otherwise the normal boot option processing takes
place.
The TimeoutDefault parameter is supposed to be set from
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPlatformBootTimeOut
which has the following (matching) documentation in
"IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec":
The number of seconds that the firmware will wait before initiating the
original default boot selection.
A value of 0 indicates that the default boot selection is to be
initiated immediately on boot.
The value of 0xFFFF then firmware will wait for user input before
booting.
OVMF does this actually -- see the Timeout variable in
PlatformBdsPolicyBehavior() -- but right before calling
PlatformBdsEnterFrontPage(), OVMF hardwires TimeoutDefault to 0xFFFF.
This has been acceptable until now, because OVMF implements its own "wait
for keypress at the splash screen" logic in PlatformBdsPolicyBehavior(),
completely avoiding the progress bar mentioned above. OVMF only calls
PlatformBdsEnterFrontPage() when the user presses a key during its own
"splash screen wait", and *then* it indeed makes sense to enter the setup
utility unconditionally.
However, even that way, the
Timeout = 0xffff;
assignment is superfluous, because 0xFFFF is already the default value of
PcdPlatformBootTimeOut in "IntelFrameworkModulePkg.dec", and OvmfPkg
doesn't override it in its DSC files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16307 6f19259b-4bc3-4df7-8a09-765794883524
This call has been dead since the conception of OvmfPkg (git commit
49ba9447 / SVN r8398), and only confuses readers -- let's remove it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16305 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
.. to avoid the use .member = value syntax as VS does not support it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16296 6f19259b-4bc3-4df7-8a09-765794883524
.. to avoid the use .member = value syntax as VS does not support it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16295 6f19259b-4bc3-4df7-8a09-765794883524
As EDK II does not allow calls with a struct.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16294 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/IoLibExAsm.asm to X64/IoLibExAsm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16290 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/IoLibExAsm.asm to Ia32/IoLibExAsm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16289 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/JumpToKernel.asm to X64/JumpToKernel.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16288 6f19259b-4bc3-4df7-8a09-765794883524
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/JumpToKernel.asm to Ia32/JumpToKernel.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16287 6f19259b-4bc3-4df7-8a09-765794883524
Implement the BlockIo protocol.
Change in V4:
- Replace the license by the commonly used file header text.
Change in V3:
- assert(Media->BlockSize % 512 == 0)
- Use Sector instead of Offset to issue IOs.
Change in V2:
- Remove blockIo2 headers.
- Fix few comment.
- file header, copyright
- Rewrite few comment and error messages
- No more callback
- Improving block read/write, increase to the max size in one request
(instead of only 8pages)
- Fix lastblock when it's a cdrom
- Do uninitialisation when fail to install fail
- few comment
- Licenses
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16274 6f19259b-4bc3-4df7-8a09-765794883524
This is the code that will do the actual communication between OVMF and
a PV block backend, where the block device lives. The protocol used is
describe in the blkif.h header.
This implementation originally comes from Mini-OS, a part of the Xen
Project.
Change in V4:
- add file header to BlockFront.h (license, copyright, brief desc)
Change in V3:
- Improve comment of XenBusReadUint64.
- Moving blkif.h to this patch
with the necessary #pragma pack(4) applied for Ia32.
- Add a note about the license in the commit message
- Add "The protocol used is describe in the blkif.h header." in the
commit message
- Have a mandatory sector-size multiple of 512 or fail to initialize.
- use Sector instead of Offset for IO request.
with Sector been 512-byte unit.
- print something if EventChannelNotify return an error.
Change in V2:
- trigger CoW is probably not needed on OVMF (as opposed to Mini-OS),
removed the test.
- comments
- renamed XenbusReadInteger to XenBusReadUint64
- remove callback from IoData, use simple status instead
- return a status from the synchronus io
- Close protocol if blockfront init fail.
- fix few debug print
- Rename XenbusIo to XenBusIo
- XenPvBlkWaitForBackendState will return an error if the new backend
states is not the expected state.
- Add the license
License: This patch adds some files which are under the MIT license.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16273 6f19259b-4bc3-4df7-8a09-765794883524
A ParaVirtualize block driver.
Change in V4:
- Replace the license by the commonly used file header text.
- Add brief description for the driver.
Change in V3:
- enable compilation for Ia32 and Ia32X64
- fix version (driver binding)
Change in V2:
- Add minimal support for controller name
- Remove stuff about BlockIo2
- Little cleanup
- Licenses and file headers
- Rename XenbusIo into XenBusIo
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16272 6f19259b-4bc3-4df7-8a09-765794883524
This patch adds three event channel related functions:
- EventChannelAllocate: Allocate an event channel port that can be bind
from a specified domain.
- EventChannelNotify: Send an event to the remote end of a channel.
- EventChannelClose: Close a local event channel port.
Change in V3:
- eventchannel, update protocol to return error code.
- expand patch description
- Add comments in the XenBus Protocol header.
Change in V2:
- coding style
- adding comment to functions
- Rename Xenbus to XenBus.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16271 6f19259b-4bc3-4df7-8a09-765794883524
This is a bus-like on top of XenStore. It will look for advertised
ParaVirtualized devices and initialize them by producing XenBus
protocol.
Change in V4:
- Replace the license by the commonly used file header text.
- Clean XenBus.h header (remove copyright that does not belong to the
file anymore; and rewrite the brief description of the file)
- Fix description on the function
Change in V3:
- Insert to ChildList later, once populated.
- Remove XENBUS_XENSTORE_NODE macro.
- add comment to XenBusAddDevice and XenBusEnumerateBus about
concurrency calls.
- Add a description to the introduced member to the protocol.
Change in V2:
- comment, file header
- Fix comment style
- Error handling in the main init function
- coding style
- Fix error path in add device.
Origin: FreeBSD 10.0
License: This patch adds XenBus.c which is under the MIT licence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16270 6f19259b-4bc3-4df7-8a09-765794883524
Change in V3:
- Have XenStoreWaitWatch/XenBusWaitForWatch return a XENSTORE_STATUS
instead of VOID.
- Add description of the introducted member of the protocol.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16269 6f19259b-4bc3-4df7-8a09-765794883524
.. because we need it in the patch titled:
"OvmfPkg/XenBusDxe: Introduce XenBus support itself."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16268 6f19259b-4bc3-4df7-8a09-765794883524
XenStore is a key/value database, which is running on another virtual
machine. It can be accessed through shared memory. This is a client
implementation.
Change in V3:
- moving xs_wire.h from patch #1 to this patch
- fix return value of XenStoreListDirectory
- Use a timeout to print a debug message if the other side of the
xenstore ring does not notify through the event channel.
This is done with the new XenStoreWaitForEvent function.
- Have XenStoreReadReply check status of XenStoreProcessMessage and
return an error if needed.
- Have XenStoreTalkv return the status of XenStoreReadReply.
- Have a loop to check for the quiescent of the response ring in the
XenStoreInitComms function. (with a timeout of 5 seconds)
- use the recently introduced XenStore 'closing' feature.
Change in V2:
- Change comment style, from freebsd to ovmf
- Fix type of EventChannel
- Fix debug print, no more cast
- Implement XenStoreDeinit.
- Clean up comments
- Fix few codding style issue
- Add FAIL xenstore status value.
Origin: FreeBSD 10.0
License: This patch adds several files under the MIT licence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16267 6f19259b-4bc3-4df7-8a09-765794883524
This atomically test's and clear's a bit.
Change in V3:
- adding IA32 support. (not yet reviewed)
both XenBusDxe/Ia32/TestAndClearBit.{S,asm} are new
Change in V2:
- Adding .asm version
- Comment the function
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16266 6f19259b-4bc3-4df7-8a09-765794883524
This first function is used to notify the other side that there is
something to do. The other side is another Xen domain.
Change in V4:
- Replace the license by the commonly used file header text.
Change in V3:
- Return error code from hypercall instead of ASSERT for
XenEventChannelNotify
- moving event_channel.h to this patch.
Change in V2:
- file header
- coding style
- adding comment to functions
- Licenses
License: This patch adds event_channel.h which is under MIT licence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16265 6f19259b-4bc3-4df7-8a09-765794883524
There are used to grant access of pages to other Xen domains.
This code originaly comes from the Xen Project, and more precisely from
MiniOS.
Change in V4:
- Add license to GrantTable.h
Change in V3:
- Add a comment about the use of the BAR of the device.
Change in V2:
- Adding locks
- Redo the file header
- Add functions comment
- Add license
Signed-off-by: Steven Smith <sos22@cam.ac.uk>
Signed-off-by: Grzegorz Milos <gm281@cam.ac.uk>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16264 6f19259b-4bc3-4df7-8a09-765794883524
This patch is inspired by InterlockedCompareExchange32 from the
BaseSynchronizationLib.
The function will be used in the "OvmfPkg/XenBusDxe: Add Grant Table
functions" patch.
Change in V3:
- Implement both .S and .asm, to get rid of GCC specific asm.
- Implement 32bit part of the assembly
Change in V2:
- Add intel compilation code
MSFT code is not compied over because I don't know how it works.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16263 6f19259b-4bc3-4df7-8a09-765794883524
This protocol will be used for communication between a PV driver (like a
PV block driver) and the XenBus/XenStore.
Change in V5:
- Replace the license by the commonly used file header text.
Change in V3:
- Add disclaimer about the volatile nature of the protocol.
- Add a description on the two introduced members to the protocol.
Change in V2:
- Comment, file header
- Protocol License
- Declare xen interface version earlier
- Rename protocol from Xenbus to XenBus
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16262 6f19259b-4bc3-4df7-8a09-765794883524
The PciIo interface will be used in "OvmfPkg/XenBusDxe: Add Grant Table
functions" to get the memory address of the BAR 1 and use the space to
map shared memory.
Change in V3:
- add a commit description.
Change in V2:
- Coding style
- Error handler
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16261 6f19259b-4bc3-4df7-8a09-765794883524
The ExitBoot event is used to disconnect from the device before the
next operating system start using them.
Change in V3:
- use the variable mMyDevice to prevent the driver from
starting twice (if there is two different PCI devices).
- free(dev) on exit
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16259 6f19259b-4bc3-4df7-8a09-765794883524
This includes Component Name and Driver Binding.
Change in V4:
- Replace the license by the commonly used file header text.
- Add brief description for the driver.
Change in V3:
- enable compilation for Ia32 and Ia32X64
- fix version (driver binding)
Change in V2:
- Simple support of controller name.
- Cleaning up comments, files header.
- Add Licenses
- Rename XenbusDxe to XenBusDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16258 6f19259b-4bc3-4df7-8a09-765794883524
This patch imports publics headers in order to use features from Xen
like XenStore, PV Block... There is only the necessary header files and
there are only a few modifications in order to facilitate future merge of
more recent header (that would be necessary to access new features).
There is little modification compared to the original files:
- Removed most of the unused part of the headers
- Use of ZeroMem() instead of memset()
- using #pragma pack(4) for IA32 compilation.
- Replace types to be more UEFI compliant using a script.
OVMF, when built for IA32 arch, uses the gcc switch -malign-double. This
change the alignment of fields in some struct compare to what is
espected by Xen and any backends. To fix the alignment, the #pragma pack(4)
directive is used around the struct that need it.
Command to run to change types:
find OvmfPkg/Include/IndustryStandard/Xen -type f -name '*.h' -exec sed
--regexp-extended --file=fix_type_in_xen_includes.sed --in-place {} \;
Avoid changing the 'long' that is not a type (with the first line).
$ cat fix_type_in_xen_includes.sed
/as long as/b
s/([^a-zA-Z0-9_]|^)uint8_t([^a-zA-Z0-9_]|$)/\1UINT8\2/g
s/([^a-zA-Z0-9_]|^)uint16_t([^a-zA-Z0-9_]|$)/\1UINT16\2/g
s/([^a-zA-Z0-9_]|^)uint32_t([^a-zA-Z0-9_]|$)/\1UINT32\2/g
s/([^a-zA-Z0-9_]|^)uint64_t([^a-zA-Z0-9_]|$)/\1UINT64\2/g
s/([^a-zA-Z0-9_]|^)int8_t([^a-zA-Z0-9_]|$)/\1INT8\2/g
s/([^a-zA-Z0-9_]|^)int16_t([^a-zA-Z0-9_]|$)/\1INT16\2/g
s/([^a-zA-Z0-9_]|^)int32_t([^a-zA-Z0-9_]|$)/\1INT32\2/g
s/([^a-zA-Z0-9_]|^)int64_t([^a-zA-Z0-9_]|$)/\1INT64\2/g
s/([^a-zA-Z0-9_]|^)void([^a-zA-Z0-9_]|$)/\1VOID\2/g
s/([^a-zA-Z0-9_]|^)unsigned int([^a-zA-Z0-9_]|$)/\1UINT32\2/g
s/([^a-zA-Z0-9_]|^)int([^a-zA-Z0-9_]|$)/\1INT32\2/g
s/([^a-zA-Z0-9_]|^)unsigned char([^a-zA-Z0-9_]|$)/\1UINT8\2/g
s/([^a-zA-Z0-9_]|^)char([^a-zA-Z0-9_]|$)/\1CHAR8\2/g
s/([^a-zA-Z0-9_]|^)unsigned long([^a-zA-Z0-9_]|$)/\1UINTN\2/g
s/([^a-zA-Z0-9_]|^)long([^a-zA-Z0-9_]|$)/\1INTN\2/g
Change in V4:
- Add a README in Xen headers directory to explain what have been done
to it. It is mostly a copy/past from the commit description with some
rewording.
- replace unsigned char by UINT8 as there is no unsigned char in UEFI
types.
Change in V3:
- Remove unused header sched.h
- moving xs_wire.h in a later patch, where it's first needed
- moving io/blkif.h in a later patch (XenPvBlkDxe: Add BlockFront client)
- moving event_channel.h in a later patch (XenBusDxe: Add Event Channel Notify)
- using #pragma pack(4) for IA32
- headers trimed down, removed most of the unused struct/define/...
License: This patch adds many files under the MIT licence.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16257 6f19259b-4bc3-4df7-8a09-765794883524
The MIT license will be used for several source files that are necessary
for the Xen PV drivers. So this patch makes it explicit by adding the
license with a note about which directory will have source files under
this license.
Change in V3:
New patch
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16256 6f19259b-4bc3-4df7-8a09-765794883524
In the previous patch we disabled its use; there are no more clients.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gary Lin <glin@suse.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16192 6f19259b-4bc3-4df7-8a09-765794883524
OvmfPkg forked SecureBootConfigDxe from SecurityPkg in SVN r13635 (git
commit 8c71ec8f). Since then, the original (in
"SecurityPkg/VariableAuthenticated/SecureBootConfigDxe") has diverged
significantly.
The initial diff between the original and the fork, when the fork was made
(ie. at SVN r13635), reads as follows:
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfig.vfr 2014-09-30 23:35:28.598067147 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfig.vfr 2014-08-09 02:40:35.824851626 +0200
> @@ -51,7 +51,7 @@
> questionid = KEY_SECURE_BOOT_ENABLE,
> prompt = STRING_TOKEN(STR_SECURE_BOOT_PROMPT),
> help = STRING_TOKEN(STR_SECURE_BOOT_HELP),
> - flags = INTERACTIVE | RESET_REQUIRED,
> + flags = INTERACTIVE,
> endcheckbox;
> endif;
>
> @@ -158,7 +158,7 @@
> questionid = KEY_SECURE_BOOT_DELETE_PK,
> prompt = STRING_TOKEN(STR_DELETE_PK),
> help = STRING_TOKEN(STR_DELETE_PK_HELP),
> - flags = INTERACTIVE | RESET_REQUIRED,
> + flags = INTERACTIVE,
> endcheckbox;
> endif;
> endform;
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.598067147 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf 2014-09-30 23:35:28.577067027 +0200
> @@ -1,5 +1,8 @@
> ## @file
> -# Component name for SecureBoot configuration module.
> +# Component name for SecureBoot configuration module for OVMF.
> +#
> +# Need custom SecureBootConfigDxe for OVMF that does not force
> +# resets after PK changes since OVMF doesn't have persistent variables
> #
> # Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.<BR>
> # This program and the accompanying materials
> diff -ur SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c
> --- SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.599067153 +0200
> +++ OvmfPkg/SecureBootConfigDxe/SecureBootConfigImpl.c 2014-09-30 23:35:28.578067033 +0200
> @@ -2559,7 +2559,7 @@
> NULL
> );
> } else {
> - *ActionRequest = EFI_BROWSER_ACTION_REQUEST_RESET;
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_SUBMIT;
> }
> break;
The commit message is not overly verbose:
OvmfPkg: Add custom SecureBootConfigDxe that doesn't reset
We don't force a platform reset for OVMF when PK is changed in custom
mode setup.
But the INF file hunk is telling:
Need custom SecureBootConfigDxe for OVMF that does not force resets
after PK changes since OVMF doesn't have persistent variables
We do have persistent variables now. Let's disable the (now obsolete)
OvmfPkg fork, and revert to the (well maintained) SecurityPkg-provided
config driver.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gary Lin <glin@suse.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16191 6f19259b-4bc3-4df7-8a09-765794883524
Recent changes in the QEMU ACPI table generator have shown that our
limited client for that interface is insufficient and/or brittle.
Implement the full interface utilizing OrderedCollectionLib for addressing
fw_cfg blobs by name.
In order to stay compatible with EFI_ACPI_TABLE_PROTOCOL, we don't try to
identify QEMU's RSD PTR and link it into the UEFI system configuration
table. Instead, once all linker/loader commands have been processed, we
process the AddPointer commands for a second time.
In the second pass, we look at the targets of these pointer commands. The
key idea (by Michael Tsirkin) is that any ACPI interpreter will only be
able to locate ACPI tables by following absolute pointers, hence QEMU's
set of AddPointer commands will cover all of the ACPI tables (and more,
see below).
Some of QEMU's AddPointer commands (ie. some fields in ACPI tables) may
point to areas in fw_cfg blobs that are not ACPI tables themselves.
Examples are the BGRT.ImageAddress field, and the TCPA.LASA field. We tell
these apart from ACPI tables by performing the following checks on pointer
target "candidates":
- length check against minimum ACPI table size, and remaining blob size
- checksum verification.
If a target area looks like an ACPI table, and is different from RSDT and
DSDT (which EFI_ACPI_TABLE_PROTOCOL handles internally), we install the
table (at which point EFI_ACPI_TABLE_PROTOCOL creates a deep copy of the
relevant segment of the pointed-to fw_cfg blob).
Simultaneously, we keep account if each fw_cfg blob has ever been
referenced as the target of an AddPointer command without that AddPointer
command actually identifying an ACPI table. In this case the containing
fw_cfg file (of AcpiNVS memory type) must remain around forever, because
we never install that area with EFI_ACPI_TABLE_PROTOCOL, but some field in
some ACPI table that we *do* install still references it, by the absolute
address that we've established during the first pass.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16158 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we rewrite the client code for QEMU's fw_cfg ACPI table
loader interface. In order to avoid randomly intermixed hunks in that
patch, first remove the old code cleanly.
We remove the InstallQemuLinkedTables() function and empty the
InstallAllQemuLinkedTables() function. We also remove CheckRsdp().
InstallAllQemuLinkedTables() will return constant EFI_NOT_FOUND to
AcpiPlatformEntryPoint(), causing the latter to proceed to OVMF's builtin
tables.
This way the history remains bisectable and the new client gets a clean
start in the next patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16157 6f19259b-4bc3-4df7-8a09-765794883524
We used to state in this header file that we only cared about the Allocate
command. This is no longer the case; update the comments accordingly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16156 6f19259b-4bc3-4df7-8a09-765794883524
The "complete" QEMU fw_cfg ACPI loader will need to look up downloaded
blobs by name, in order to implement the AddPointer and AddChecksum
commands. Introduce OrderedCollectionLib to support such indexing.
BaseOrderedCollectionRedBlackTreeLib is a BASE module, hence add the
OrderedCollectionLib resolution to the main [LibraryClasses] section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16155 6f19259b-4bc3-4df7-8a09-765794883524
SVN r16092 ('ShellPkg: Add a new library for "bcfg" command') introduced a
new library class (and an instance for it) called BcfgCommandLib.
SVN r16093 ('ShellPkg: Use the new library for "bcfg" command') rebased
ShellPkg to the new library, introducing a new [LibraryClasses]
dependency.
Library classes must be resolved to library instances in client platform
descriptions (DSC's). Since OVMF is a client platform, import the same
library resolution as seen in "ShellPkg/ShellPkg.dsc" (added in SVN
r16092).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16095 6f19259b-4bc3-4df7-8a09-765794883524
Pick the appropriate bus:dev.fn for accessing ACPI power management
registers (00:01.3 on PIIX4 vs. 00:1f.0 on Q35) based on the device
ID of the host bridge (assumed always present at 00:00.0).
With this patch, OVMF can boot QEMU's "-machine q35" x86 machine type.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16066 6f19259b-4bc3-4df7-8a09-765794883524
When setting up the list of GOP modes offered on QEMU's stdvga ("VGA") and
QXL ("qxl-vga") video devices, QemuVideoBochsModeSetup() filters those
modes against the available framebuffer size. (Refer to SVN r15288 / git
commit ec88061e.)
The VBE_DISPI_INDEX_VIDEO_MEMORY_64K register of both stdvga and QXL is
supposed to report the size of the drawable, VGA-compatibility
framebuffer. Instead, up to and including qemu-2.1, this register actually
reports the full video RAM (PCI BAR 0) size.
In case of stdvga, this happens to be correct, because on that card the
full PCI BAR 0 is usable for drawing; there is no difference between
"drawable framebuffer size" and "video RAM (PCI BAR 0) size".
However, on the QXL card, only an initial portion of the video RAM is
suitable for drawing, as compatibility framebuffer; and the value
currently reported by VBE_DISPI_INDEX_VIDEO_MEMORY_64K overshoots the
valid size. Beyond the drawable range, the video RAM contains buffers and
structures for the QXL guest-host protocol.
Luckily, the size of the drawable QXL framebuffer can also be read from a
register in the QXL ROM BAR (PCI BAR 2), so let's retrieve it from there.
Without this fix, OVMF offers too large resolutions on the QXL card (up to
the full size of the video RAM). If a GOP client selects such a resolution
and draws into the video RAM past the compatibility segment, then the
guest corrupts its communication structures (which is invalid guest
behavior).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15978 6f19259b-4bc3-4df7-8a09-765794883524
We strongly prefer that contribtions be offered using the same license
as the project/module. But, we should document other acceptable
licenses for contributions.
This will allow package owners to more easily know if they can accept
a contribution under a different source license.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Mark Doran <mark.doran@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
Using NASM we build OVMF's ResetVector as part of the EDK II build
process.
v2:
* Use EDK II extension of .nasmb rather than .nasmbin
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15823 6f19259b-4bc3-4df7-8a09-765794883524
OVMF_VARS.fd and OVMF_CODE.fd split the variable store and the firmware
code in separate files.
The PCDs' values continue to depend only on FD_SIZE_1MB vs. FD_SIZE_2MB.
With the split files, it must be ensured on the QEMU command line that
OVMF_VARS.fd and OVMF_CODE.fd be contiguously mapped so that they end
exactly at 4GB. See QEMU commit 637a5acb (first released in v2.0.0).
In this patch we must take care to assign each PCD only once.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15670 6f19259b-4bc3-4df7-8a09-765794883524
This saves code duplication between the Ia32, Ia32X64, and X64 flavors,
and enables the next patch to include the varstore in new FD files by
reference.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15669 6f19259b-4bc3-4df7-8a09-765794883524
Lack of these braces causes build errors when -Wno-missing-braces is
absent. Spelling out more braces also helps understanding the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15586 6f19259b-4bc3-4df7-8a09-765794883524
The fw_cfg file "etc/acpi/tables" is not a stable guest interface -- QEMU
could rename it in the future, and/or introduce additional fw_cfg files
with ACPI payload. Only the higher-level "etc/table-loader" file is
considered stable, which contains a sequence of commands to assist
firmware with reading QEMU ACPI tables from the FwCfg interface.
Because edk2 provides publishing support for ACPI tables, OVMF only uses
the Allocate command to find the names of FwCfg files to read and publish
as ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15574 6f19259b-4bc3-4df7-8a09-765794883524
In one of the next patches we'll start scanning all fw_cfg files that QEMU
advertises as carrying ACPI tables, not just "etc/acpi/tables".
The RSD PTR table is known to occur in the "etc/acpi/rsdp" fw_cfg file.
Since edk2 handles RSD PTR automatically, similarly to RSDT and XSDT,
let's exclude RSD PTR too from the manually installed tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15573 6f19259b-4bc3-4df7-8a09-765794883524
Split InstallQemuLinkedTables() in two:
- the function now takes the name of the fw_cfg file (from which ACPI
tables are to be extracted) as a parameter,
- the new function InstallAllQemuLinkedTables() calls the former with
fw_cfg file names, and cumulatively tracks the ACPI tables installed by
all invocations of the former.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15572 6f19259b-4bc3-4df7-8a09-765794883524
Names of firmware configuration files always take 56 bytes (including at
least one terminating NUL byte). Expose this constant to all consumers of
QemuFwCfgLib because further interfaces may depend on it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15571 6f19259b-4bc3-4df7-8a09-765794883524
Locate QEMU SMBIOS data in fw_cfg and install it via the
SMBIOS protocol.
Starting with qemu-2.1, on pc/x86 machines of type >= 2.1, full
SMBIOS tables are generated and inserted into fw_cfg (i.e., no
per-field patching of locally generated structures is required).
Aside from new code to extract a SMBIOS blob from fw_cfg, this
patch utilizes the pre-existing infrastructure (already used by
Xen) to handle final SMBIOS table creation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15542 6f19259b-4bc3-4df7-8a09-765794883524
The SMBIOS specification requires some structure types to
contain reference fields to other structures' handles. When
InstallAllStructures() rebuilds the SMBIOS tables by traversing
an existing source table, the use of SMBIOS_HANDLE_PI_RESERVED
causes automatically generated, arbitrary handle numbers to be
assigned to each cloned structure. This causes all reference
handle fields to become invalid.
This patch modifies InstallAllStructures() to reuse the original
handle numbers supplied by the underlying VM, preserving the
correctness of any included handle references.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15541 6f19259b-4bc3-4df7-8a09-765794883524
The Windows 2008 R2 SP1 (and Windows 7) UEFI guest's default video driver
dereferences the real mode Int10h vector, loads the pointed-to handler
code, and executes what it thinks to be VGA BIOS services in an internal
real-mode emulator. Consequently, video mode switching doesn't work in
Windows 2008 R2 SP1 when it runs on the pure UEFI build of OVMF, making
the guest uninstallable.
This patch adds a VGABIOS "shim" to QemuVideoDxe. For the first stdvga or
QXL card bound, an extremely stripped down VGABIOS imitation is installed
in the C segment. It provides a real implementation for the few services
that are in fact necessary for the win2k8r2sp1 UEFI guest, plus some fakes
that the guest invokes but whose effect is not important.
The C segment is not present in the UEFI memory map prepared by OVMF. We
never add memory space that would cover it (either in PEI, in the form of
memory resource descriptor HOBs, or in DXE, via gDS->AddMemorySpace()).
This way the handler body is invisible to all non-buggy UEFI guests, and
the rest of edk2.
The Int10h real-mode IVT entry is covered with a Boot Services Code page,
making that too unaccessible to the rest of edk2. (Thus UEFI guest OSes
different from the Windows 2008 family can reclaim the page. The Windows
2008 family accesses the page at zero regardless of the allocation type.)
The patch is the result of collaboration:
Initial proof of concept IVT entry installation and handler skeleton (in
NASM) by Jordan Justen.
Service tracing and implementation, data collection/analysis, and C coding
by yours truly.
Last minute changes by Gerd Hoffmann:
- Use OEM mode number (0xf1) instead of standard 800x600 mode (0x143). The
resolution of the OEM mode (0xf1) is not standardized; the guest can't
expect anything from it in advance.
- Use 1024x768 rather than 800x600 for more convenience in the Windows
2008 R2 SP1 guest during OS installation, and after normal boot until
the QXL XDDM guest driver is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15540 6f19259b-4bc3-4df7-8a09-765794883524
OVMF's SecMain is unique in the sense that it links against the following
two libraries *in combination*:
- IntelFrameworkModulePkg/Library/LzmaCustomDecompressLib/
LzmaCustomDecompressLib.inf
- MdePkg/Library/BaseExtractGuidedSectionLib/
BaseExtractGuidedSectionLib.inf
The ExtractGuidedSectionLib library class allows decompressor modules to
register themselves (keyed by GUID) with it, and it allows clients to
decompress file sections with a registered decompressor module that
matches the section's GUID.
BaseExtractGuidedSectionLib is a library instance (of type BASE) for this
library class. It has no constructor function.
LzmaCustomDecompressLib is a compatible decompressor module (of type
BASE). Its section type GUID is
gLzmaCustomDecompressGuid == EE4E5898-3914-4259-9D6E-DC7BD79403CF
When OVMF's SecMain module starts, the LzmaCustomDecompressLib constructor
function is executed, which registers its LZMA decompressor with the above
GUID, by calling into BaseExtractGuidedSectionLib:
LzmaDecompressLibConstructor() [GuidedSectionExtraction.c]
ExtractGuidedSectionRegisterHandlers() [BaseExtractGuidedSectionLib.c]
GetExtractGuidedSectionHandlerInfo()
PcdGet64 (PcdGuidedExtractHandlerTableAddress) -- NOTE THIS
Later, during a normal (non-S3) boot, SecMain utilizes this decompressor
to get information about, and to decompress, sections of the OVMF firmware
image:
SecCoreStartupWithStack() [OvmfPkg/Sec/SecMain.c]
SecStartupPhase2()
FindAndReportEntryPoints()
FindPeiCoreImageBase()
DecompressMemFvs()
ExtractGuidedSectionGetInfo() [BaseExtractGuidedSectionLib.c]
ExtractGuidedSectionDecode() [BaseExtractGuidedSectionLib.c]
Notably, only the extraction depends on full-config-boot; the registration
of LzmaCustomDecompressLib occurs unconditionally in the SecMain EFI
binary, triggered by the library constructor function.
This is where the bug happens. BaseExtractGuidedSectionLib maintains the
table of GUIDed decompressors (section handlers) at a fixed memory
location; selected by PcdGuidedExtractHandlerTableAddress (declared in
MdePkg.dec). The default value of this PCD is 0x1000000 (16 MB).
This causes SecMain to corrupt guest OS memory during S3, leading to
random crashes. Compare the following two memory dumps, the first taken
right before suspending, the second taken right after resuming a RHEL-7
guest:
crash> rd -8 -p 1000000 0x50
1000000: c0 00 08 00 02 00 00 00 00 00 00 00 00 00 00 00 ................
1000010: d0 33 0c 00 00 c9 ff ff c0 10 00 01 00 88 ff ff .3..............
1000020: 0a 6d 57 32 0f 00 00 00 38 00 00 01 00 88 ff ff .mW2....8.......
1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo
1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so.........
vs.
crash> rd -8 -p 1000000 0x50
1000000: 45 47 53 49 01 00 00 00 20 00 00 01 00 00 00 00 EGSI.... .......
1000010: 20 01 00 01 00 00 00 00 a0 01 00 01 00 00 00 00 ...............
1000020: 98 58 4e ee 14 39 59 42 9d 6e dc 7b d7 94 03 cf .XN..9YB.n.{....
1000030: 00 00 00 00 00 00 00 00 73 69 67 6e 61 6c 6d 6f ........signalmo
1000040: 64 75 6c 65 2e 73 6f 00 00 00 00 00 00 00 00 00 dule.so.........
The "EGSI" signature corresponds to EXTRACT_HANDLER_INFO_SIGNATURE
declared in
MdePkg/Library/BaseExtractGuidedSectionLib/BaseExtractGuidedSectionLib.c.
Additionally, the gLzmaCustomDecompressGuid (quoted above) is visible at
guest-phys offset 0x1000020.
Fix the problem as follows:
- Carve out 4KB from the 36KB gap that we currently have between
PcdOvmfLockBoxStorageBase + PcdOvmfLockBoxStorageSize == 8220 KB
and
PcdOvmfSecPeiTempRamBase == 8256 KB.
- Point PcdGuidedExtractHandlerTableAddress to 8220 KB (0x00807000).
- Cover the area with an EfiACPIMemoryNVS type memalloc HOB, if S3 is
supported and we're not currently resuming.
The 4KB size that we pick is an upper estimate for
BaseExtractGuidedSectionLib's internal storage size. The latter is
calculated as follows (see GetExtractGuidedSectionHandlerInfo()):
sizeof(EXTRACT_GUIDED_SECTION_HANDLER_INFO) + // 32
PcdMaximumGuidedExtractHandler * (
sizeof(GUID) + // 16
sizeof(EXTRACT_GUIDED_SECTION_DECODE_HANDLER) + // 8
sizeof(EXTRACT_GUIDED_SECTION_GET_INFO_HANDLER) // 8
)
OVMF sets PcdMaximumGuidedExtractHandler to 16 decimal (which is the
MdePkg default too), yielding 32 + 16 * (16 + 8 + 8) == 544 bytes.
Regarding the lifecycle of the new area:
(a) when and how it is initialized after first boot of the VM
The library linked into SecMain finds that the area lacks the signature.
It initializes the signature, plus the rest of the structure. This is
independent of S3 support.
Consumption of the area is also limited to SEC (but consumption does
depend on full-config-boot).
(b) how it is protected from memory allocations during DXE
It is not, in the general case; and we don't need to. Nothing else links
against BaseExtractGuidedSectionLib; it's OK if DXE overwrites the area.
(c) how it is protected from the OS
When S3 is enabled, we cover it with AcpiNVS in InitializeRamRegions().
When S3 is not supported, the range is not protected.
(d) how it is accessed on the S3 resume path
Examined by the library linked into SecMain. Registrations update the
table in-place (based on GUID matches).
(e) how it is accessed on the warm reset path
If S3 is enabled, then the OS won't damage the table (due to (c)), hence
see (d).
If S3 is unsupported, then the OS may or may not overwrite the
signature. (It likely will.) This is identical to the pre-patch status.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15433 6f19259b-4bc3-4df7-8a09-765794883524
In many cases, the second node in /pci@i0cf8/XYZ@DD,FF node is enough
to match a UEFI device path; a typical cases is a NIC that is assigned
from the host to the guest. Add a catch-all case for PCI devices, and
reuse it for NICs since it works well for those too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15422 6f19259b-4bc3-4df7-8a09-765794883524
VideoDxe is a UEFI_DRIVER, so it has by default a null instance
of PcdLib. It accesses two PCDs that are now dynamic
(gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
and gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution).
Similar to r15362 (OvmfPkg: non-null PcdLib instance for
GraphicsConsoleDxe, 2014-03-22), we need to specify a non-null
instance of PcdLib.
This patch unbreaks the CSM VideoDxe module for OvmfPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15421 6f19259b-4bc3-4df7-8a09-765794883524
Recent qemu versions compose all ACPI tables on the host side, according
to the target hardware configuration, and make the tables available to any
guest firmware over fw_cfg.
See version compatibility information below.
The feature moves the burden of keeping ACPI tables up-to-date from boot
firmware to qemu (which is the source of hardware configuration anyway).
This patch adds client code for this feature. Benefits of the
qemu-provided ACPI tables include PCI hotplug for example.
Qemu provides the following three fw_cfg files:
- etc/acpi/rsdp
- etc/acpi/tables
- etc/table-loader
"etc/acpi/rsdp" and "etc/acpi/tables" are similar, they are only kept
separate because they have different allocation requirements in SeaBIOS.
Both of these fw_cfg files contain preformatted ACPI payload.
"etc/acpi/rsdp" contains only the RSDP table, while "etc/acpi/tables"
contains all other tables, concatenated.
The tables in these two fw_cfg files are filled in by qemu, but two kinds
of fields are left incomplete in each table: pointers to other tables, and
checksums (which depend on the pointers).
Qemu initializes each pointer with a relative offset into the fw_cfg file
that contains the pointed-to ACPI table. The final pointer values depend
on where the fw_cfg files, holding the pointed-to ACPI tables, will be
placed in memory by the guest. That is, the pointer fields need to be
"relocated" (incremented) by the base addresses of where "/etc/acpi/rsdp"
and "/etc/acpi/tables" will be placed in guest memory.
This is where the third file, "/etc/table-loader" comes in the picture. It
is a linker/loader script that has several command types:
One command type instructs the guest to download the other two files.
Another command type instructs the guest to increment ("absolutize") a
pointer field (having a relative initial value) in the pointing ACPI
table, present in some fw_cfg file, with the dynamic base address of the
same (or another) fw_cfg file, holding the pointed-to ACPI table.
The third command type instructs the guest to compute checksums over
ranges and to store them.
In edk2, EFI_ACPI_TABLE_PROTOCOL knows about table relationships -- it
handles linkage automatically when a table is installed. The protocol
takes care of checksumming too. RSDP is installed automatically. Hence we
only need to care about the "etc/acpi/tables" fw_cfg file, determining the
boundaries of each ACPI table inside it, and installing those tables.
Qemu compatibility information:
--------------+---------------------+-------------------------------------
qemu version | qemu machine type | effects of the patch
--------------+---------------------+-------------------------------------
up to 1.6.x | any pc-i440fx | None. OVMF's built-in ACPI tables
| | are used.
--------------+---------------------+-------------------------------------
any | up to pc-i440fx-1.6 | None. OVMF's built-in ACPI tables
| | are used.
--------------+---------------------+-------------------------------------
1.7.0 | pc-i440fx-1.7 | Potential guest OS crash, dependent
| (default for 1.7.0) | on guest RAM size.
| |
| | DO NOT RUN OVMF on the (1.7.0,
| | pc-i440fx-1.7) qemu / machine type
| | combination.
--------------+---------------------+-------------------------------------
1.7.1 | pc-i440fx-1.7 | OVMF downloads valid ACPI tables
| (default for 1.7.1) | from qemu and passes them to the
| | guest OS.
--------------+---------------------+-------------------------------------
2.0.0-rc0 | pc-i440fx-1.7 or | OVMF downloads valid ACPI tables
| later | from qemu and passes them to the
| | guest OS.
-------------+---------------------+-------------------------------------
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15420 6f19259b-4bc3-4df7-8a09-765794883524
The previous patch ensures that the LockBox is protected during DXE (but
the OS can still drop it) if S3 is unsupported or disabled. However, S3
related drivers not only save data in the lockbox, they allocate objects
with Reserved and AcpiNVS memory types too, which the OS can't (must not)
release. This is a waste when S3 is unsupported or disabled.
In OVMF a good "choke point" for these drivers is the entry point of
AcpiS3SaveDxe. The messages of the following commits are relevant to the
data and control flow:
- SVN r15290 (git commit 8f5ca05b)
- SVN r15305 (git commit 5a217a06)
- SVN r15306 (git commit d4ba06df)
Prevent AcpiS3SaveDxe from loading when S3 is unsupported or disabled.
This should keep away (most of the) dependent drivers too.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15419 6f19259b-4bc3-4df7-8a09-765794883524
If (mBootMode == BOOT_ON_S3_RESUME) -- that is, we are resuming --, then
the patch has no observable effect.
If (mBootMode != BOOT_ON_S3_RESUME && mS3Supported) -- that is, we are
booting or rebooting, and S3 is supported), then the patch has no
observable effect either.
If (mBootMode != BOOT_ON_S3_RESUME && !mS3Supported) -- that is, we are
booting or rebooting, and S3 is unsupported), then the patch effects the
following two fixes:
- The LockBox storage is reserved from DXE (but not the OS). Drivers in
DXE may save data in the LockBox regardless of S3 support, potentially
corrupting any overlapping allocations. Make sure there's no overlap.
- The LockBox storage is cleared. A LockBox inherited across a non-resume
reboot, populated with well-known GUIDs, breaks drivers that want to
save entries with those GUIDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15418 6f19259b-4bc3-4df7-8a09-765794883524
Establish the full stack of conversions when modifying the platform
configuration:
ConfigResp -- form engine / HII communication
|
[ConfigToBlock]
|
v
MAIN_FORM_STATE -- binary representation of form/widget state
|
[FormStateToPlatformConfig]
|
v
PLATFORM_CONFIG -- accessible to DXE and UEFI drivers
|
[PlatformConfigSave]
|
v
UEFI non-volatile variable -- accessible to external utilities
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15375 6f19259b-4bc3-4df7-8a09-765794883524
Establish the full stack of conversions in retrieving the platform
configuration:
MultiConfigAltResp -- form engine / HII communication
^
|
[BlockToConfig]
|
MAIN_FORM_STATE -- binary representation of form/widget state
^
|
[PlatformConfigToFormState]
|
PLATFORM_CONFIG -- accessible to DXE and UEFI drivers
^
|
[PlatformConfigLoad]
|
UEFI non-volatile variable -- accessible to external utilities
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15374 6f19259b-4bc3-4df7-8a09-765794883524
The RouteConfig() function is also called now as expected.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15373 6f19259b-4bc3-4df7-8a09-765794883524
Generate the options for the drop-down list from the GOP resolutions.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15372 6f19259b-4bc3-4df7-8a09-765794883524
If Start() succeeds, the callback is only executed when the setup is
complete (on the stack of RestoreTPL()), rather than on the stack of
InstallMultipleProtocolInterfaces(), when the driver setup may yet be
theoretically incomplete.
If Start() fails, the protocol interface will have been uninstalled
(rolled back) by the time the callback runs (again, on the stack of
RestoreTPL()). Since protocol notification callbacks begin with locating
the protocol interface in question, such attempts to locate will fail
immediately and save some work in the callback.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15371 6f19259b-4bc3-4df7-8a09-765794883524
In this patch we populate the form with the two widgets related to video
resolution:
- A read-only string field displaying the preference for the next boot.
- A drop-down list offering choices for changing the setting. This list is
implemented with dynamically generated IFR opcodes.
(In general, the current preference may be missing, or it may be invalid
for the available video RAM size. The list of possible new settings is
filtered with the video RAM size.)
Because the form now becomes able to receive input, we must also implement
ExtractConfig(). This function tells the HII engine about the state of the
widgets.
For now we set up both widgets with static data only:
- The current preference always says "Unset". The driver code is still
isolated from the backend (the UEFI variable store).
- The list of possible resolutions offers 800x600 only. We don't
interrogate the GOP yet.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15369 6f19259b-4bc3-4df7-8a09-765794883524
We'll need a C language (ie. structure) representation for the state of
the visual elements on the form. We choose the Buffer Storage kind (see
29.2.5.6 "Storage" in UEFI 2.4A), because it's easy to work with.
Note that the structure added in this patch has nothing to do with UEFI
non-volatile variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15368 6f19259b-4bc3-4df7-8a09-765794883524
The GraphicsConsoleDxe driver (in MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
Setting the graphics resolution during boot is useful when the guest OS
(for lack of a dedicated display driver) continues to work with the
original GOP resolution and framebuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15366 6f19259b-4bc3-4df7-8a09-765794883524
The two functions introduced here allow the saving and loading of platform
configuration to/from the non-volatile variable store.
The PLATFORM_CONFIG structure and the two functions that take it / return
it are generally meant for any DXE or UEFI driver that needs to access
platform configuration. For now we keep this small "library" internal to
PlatformDxe.
The PLATFORM_CONFIG wire format is intended only to grow over time (as
long as the variable GUID remains unchanged). At the introduction of new
fields, new feature flags must be added, and recognized in
PlatformConfigLoad().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15365 6f19259b-4bc3-4df7-8a09-765794883524
This DXE driver will load/save persistent values for OVMF's config knobs,
plus expose those knobs via HII.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15364 6f19259b-4bc3-4df7-8a09-765794883524
This GUID should become a new "namespace" for UEFI variables that are
specific to OVMF configuration (as opposed to standard UEFI global
variables). We'll also use it as the GUID of the related HII form-set (ie.
the interactive user interface).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15363 6f19259b-4bc3-4df7-8a09-765794883524
GraphicsConsoleDxe (a UEFI_DRIVER under MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
In one of the next patches, we'd like to change these PCDs. In order for
GraphicsConsoleDxe to retrieve the new values dynamically,
- it must be linked with the non-null instance of PcdLib,
- OvmfPkg must provide dynamic defaults.
We keep MdeModulePkg's 800x600 default resolution. (The UEFI specification
requires video drivers to support 800x600.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15362 6f19259b-4bc3-4df7-8a09-765794883524
The Boot#### variables that have become unreferenced in the new BootOrder
variable won't ever be automatically reused for booting. They are
"unreachable" resources that take up room in the variable store. Make an
effort to remove them.
This should plug the leak which, given sufficient reboots, exhausts the
variable store with stale Boot#### variables and renders the VM
unbootable.
Reported-by: Michael Chang <mchang@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15327 6f19259b-4bc3-4df7-8a09-765794883524
When PI can distinguish the "full config" boot mode from "assume no
changes", then the following BDS logic is correct:
if BootMode == BOOT_WITH_FULL_CONFIGURATION:
//
// connect all devices
// create & append each default boot option that's missing
//
BdsLibConnectAll
BdsLibEnumerateAllBootOption
else if BootMode == BOOT_ASSUMING_NO_CONFIGURATION_CHANGES:
//
// just stick with current BootOrder and the Boot#### variables
// referenced by it
//
In theory, the first branch is intended to run infrequently, and the
"assume no changes" branch should run most of the time.
However, some platforms can't tell these two boot modes apart. The
following substitute had been introduced:
//
// Technically, always assume "full config", but the BootMode HOB is
// actually meaningless wrt. to "full config" or "assume no changes".
//
ASSERT (BootMode == BOOT_WITH_FULL_CONFIGURATION);
//
// Key off the existence of BootOrder. Try to prepare an in-memory list
// of boot options, based on BootOrder and the referenced Boot####
// variables.
//
Status = BdsLibBuildOptionFromVar()
//
// If that succeeded, we'll treat it as "assume no changes". If it
// failed (*only* if it failed), we'll build default boot options,
// calling it "full config":
//
if EFI_ERROR(Status):
BdsLibConnectAll()
BdsLibEnumerateAllBootOption(BootOptionList)
What we have now in OVMF is a mixture of the hack, and the behavior that's
theoretically correct for "full config":
- We assert "full config" -- this is OK.
- We call "connect all" and "enumerate all" deliberately -- this is OK
too. It matches "full config" which we assert.
- However, we also have the hack in place, which had been meant as an
alternative.
In order to clean this up, we either need to restore the hack to its
original form (ie. comment out the unconditional calls again), or we ought
to remove the hack altogether.
The unconditional "connect all" + "enumerate all" calls are the correct
approach for OVMF, because we want, in fact, to start with "full config".
The QEMU boot order specification and the set of emulated devices might
change "out of band", which excludes "assume no changes".
In other words, removing the hack corresponds to the "real production"
case that the comment hints at.
Because SetBootOrderFromQemu() may change the BootOrder NvVar, we must
preserve the BdsLibBuildOptionFromVar() function call, in order to
refresh the in-memory list with the new boot priorities.
(The last step of BdsLibEnumerateAllBootOption() is such a call too.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15326 6f19259b-4bc3-4df7-8a09-765794883524
This driver (from
"MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf")
is first loaded normally during DXE. When the
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely
as a form of notification), the driver reloads itself to reserved memory.
During S3 Resume / PEI, the driver image is executed from there. In order
to access the boot script saved during S3 Suspend, LockBox access is
needed.
The boot script is transferred internal to PiDxeS3BootScriptLib:
Both S3SaveStateDxe and BootScriptExecutorDxe are statically linked
against PiDxeS3BootScriptLib. Whichever is loaded first (during normal
boot, in the DXE phase), allocates the root storage for the script. The
address is then passed between the PiDxeS3BootScriptLib instances living
in the two separate drivers thru the dynamic
PcdS3BootScriptTablePrivateDataPtr PCD.
Dependencies:
BootScriptExecutorDxe
gEfiLockBoxProtocolGuid [OvmfPkg/AcpiS3SaveDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15307 6f19259b-4bc3-4df7-8a09-765794883524
BootScriptExecutorDxe, to be pulled in in the next patch, was written with
the SMM implementation of LockBox in mind. That implementation is split in
the following three parts:
- client side (DXE/PEI) library,
- SMM driver producing gEfiLockBoxProtocolGuid,
- driver side (SMM) library.
BootScriptExecutorDxe includes the client side LockBoxLib. So that the
library can communicate with the SMM LockBox driver, BootScriptExecutorDxe
has a Depex on gEfiLockBoxProtocolGuid, normally installed by the SMM
LockBox driver. This is actually not a hard dependency, it just ensures
correct load order between BootScriptExecutorDxe and
MdeModulePkg/Universal/LockBox/SmmLockBox.
The (client side) LockBox library instance in OVMF doesn't depend on a
separate driver that produces gEfiLockBoxProtocolGuid. Nothing produces
that GUID right now in OVMF. This prevents BootScriptExecutorDxe from
loading.
Install gEfiLockBoxProtocolGuid in our only S3-specific, custom DXE
driver, in order to enable loading of BootScriptExecutorDxe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15306 6f19259b-4bc3-4df7-8a09-765794883524
The trigger to actually save the boot script is the installation of
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL, to be performed by any DXE driver.
Installation of the protocol also locks down SMM (as its name indicates)
and (in theory) prevents further LockBox access.
We cannot install this protocol before BdsLibBootViaBootOption() is called
(eg. in OVMF's PlatformBdsPolicyBehavior()), because
BdsLibBootViaBootOption() calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save(), which
needs LockBox access.
We also can't install the protocol after BdsLibBootViaBootOption()
returns, simply because control is never returned to us.
Therefore modify our EFI_ACPI_S3_SAVE_PROTOCOL implementation so that the
boot script is prepared and installed internally to S3Save().
(The boot script must contain at least one opcode, otherwise
S3BootScriptLib runs into an assertion failure. We add a harmless (no-op)
"information" opcode.)
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15305 6f19259b-4bc3-4df7-8a09-765794883524
"MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces
the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3
Boot Script, to be replayed in PEI during S3 Resume. The script contains
opcodes and opcode arguments to configure CPU, PCI and IO resources.
S3SaveStateDxe relies on the S3BootScriptLib library. The Null
implementation is not useful for actually saving the boot script, we need
the PiDxeS3BootScriptLib instance.
The PiDxeS3BootScriptLib library instance depends on LockBoxLib,
implemented for OVMF in one of the previous patches.
PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null
instance of the latter. It means that SMBus commands in the boot script
will have no effect when interpreted during S3 Resume. This should be fine
for OvmfPkg and QEMU.
EFI_S3_SAVE_STATE_PROTOCOL [S3SaveStateDxe]
S3BootScriptLib [PiDxeS3BootScriptLib]
SmbusLib [BaseSmbusLibNull]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver
(purely as a form of notification), the S3SaveStateDxe driver saves the
boot script to EfiACPIMemoryNVS, and links it into the LockBox.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15304 6f19259b-4bc3-4df7-8a09-765794883524
"OvmfPkg/AcpiS3SaveDxe/AcpiS3SaveDxe.inf" (originally:
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf")
produces the EFI_ACPI_S3_SAVE_PROTOCOL.
When found, this protocol is automatically invoked by
BdsLibBootViaBootOption(), in file
"IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c", right before
booting a boot option, to save ACPI S3 context.
At that point during BDS, our AcpiPlatformDxe driver will have installed
the FACS table (which AcpiS3SaveDxe has a use-time dependency upon).
With regard to dependencies: AcpiS3SaveDxe implements
EFI_ACPI_S3_SAVE_PROTOCOL by relying on LockBoxLib.
BdsLibBootViaBootOption()
EFI_ACPI_S3_SAVE_PROTOCOL [AcpiS3SaveDxe]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Remove EmuNvramLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15303 6f19259b-4bc3-4df7-8a09-765794883524
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf"
currently specifies a DepEx on gEfiMpServiceProtocolGuid (MP Services).
The justification is the following code sequence:
InstallAcpiS3Save()
if PcdFrameworkCompatibilitySupport is set:
InstallAcpiS3SaveThunk()
if EFI_MP_SERVICES_PROTOCOL is available:
GetVariable(ACPI_GLOBAL_VARIABLE)
In English, the AcpiS3SaveDxe driver insists on the presence of MP
Services *unconditionally* because,
- if PcdFrameworkCompatibilitySupport is set (the default is false),
- and MP Services are available (which is constant true under the above
condition),
then the AcpiS3SaveDxe driver would like to get the ACPI_GLOBAL_VARIABLE
variable from the MP Services driver, rather than setting it itself.
The DepEx prevents AcpiS3SaveDxe from loading under OvmfPkg, since we
provide no MP Services implementation. This is particularly broken since
the default PcdFrameworkCompatibilitySupport value is FALSE, making the
entire code that would look at EFI_MP_SERVICES_PROTOCOL dead.
Copy AcpiS3SaveDxe to OvmfPkg, substitute PcdFrameworkCompatibilitySupport
with constant FALSE, and remove all code that becomes dead, including the
DepEx.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15302 6f19259b-4bc3-4df7-8a09-765794883524
The S3 suspend/resume infrastructure depends on the LockBox library class.
The edk2 tree currently contains Null and SMM instances. The Null instance
is useless, and the SMM instance would require SMM emulation by including
the SMM core and adding several new drivers, which is deemed too complex.
Hence add a simple LockBoxLib instance for OVMF.
jordan.l.justen@intel.com:
* use PCDs instead of EmuNvramLib
- clear memory in PlatformPei on non S3 boots
* allocate NVS memory and store a pointer to that memory
- reduces memory use at fixed locations
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15301 6f19259b-4bc3-4df7-8a09-765794883524
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf" produces the
EFI_PEI_S3_RESUME2 PEIM-to-PEIM Interface.
When the platform-specific initialization code (in PEI) sets the Boot Mode
to BOOT_ON_S3_RESUME, the DXE IPL (which is the last step in PEI) skips
the DXE phase entirely, and executes the S3 Resume PEIM through the
EFI_PEI_S3_RESUME2 interface instead. (See DxeLoadCore() in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c".)
S3Resume2Pei depends on LockBoxLib.
EFI_PEI_S3_RESUME2 [S3Resume2Pei]
LockBoxLib [OvmfPkg/Library/LockBoxLib]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15300 6f19259b-4bc3-4df7-8a09-765794883524
On S3 resume, we skip decompression of the PEI FV, and expect
to jump directly into it. For this to work, we need the OS to
leave the memory range untouched.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15299 6f19259b-4bc3-4df7-8a09-765794883524
On X64, the reset vector code in
"OvmfPkg/ResetVector/Ia32/PageTables64.asm" identity maps the first 4GB of
RAM for PEI, consuming six frames starting at 8MB.
This range is declared by the PcdOvmfSecPageTablesBase/Size PCDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[jordan.l.justen@intel.com: Move to MemDetect.c; use PCDs]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15298 6f19259b-4bc3-4df7-8a09-765794883524
Since we marked the FV at PcdOvmfPeiMemFvBase as ACPI NVS memory,
we can use it on S3 resume.
The FV at PcdOvmfDxeMemFvBase may have been overwritten by the OS,
but we do not use it's contents on S3 resume.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15296 6f19259b-4bc3-4df7-8a09-765794883524
We will not be running DXE on S3 resume, so we don't
need to do these initialization items:
* Reserve EMU Variable memory range
* Declare Firmware volumes
* Add memory HOBs
v5:
* Move MiscInitialization back to running on S3 resume
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15295 6f19259b-4bc3-4df7-8a09-765794883524
This 32k section of RAM will be declared to the PEI Core on
S3 resume to allow memory allocations during S3 resume PEI.
If the boot mode is BOOT_ON_S3_RESUME, then we publish
the pre-reserved PcdS3AcpiReservedMemory range to PEI.
If the boot mode is not BOOT_ON_S3_RESUME, then we reserve
this range as ACPI NVS so the OS will not use it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15294 6f19259b-4bc3-4df7-8a09-765794883524
QEMU indicates whether S3 is supported or not in the
fw-cfg interface.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15293 6f19259b-4bc3-4df7-8a09-765794883524
Such a packaged query function will come in handy in the following
patches.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: check for enabled rather than disabled]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15292 6f19259b-4bc3-4df7-8a09-765794883524
This brings the list of BOCHS video modes to par with the QEMU QXL
implementation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15289 6f19259b-4bc3-4df7-8a09-765794883524
In the next patch we'll add many new BOCHS modes, some of which require
large frame buffers.
The size of the QXL VGA compatibility framebuffer can be changed with the
-global qxl-vga.vgamem_mb=$NUM_MB
QEMU option.
If $NUM_MB would exceed 32, then the following two QEMU options are
necessary instead:
-global qxl-vga.vgamem_mb=$NUM_MB \
-global qxl-vga.ram_size_mb=$((NUM_MB*2))
because the compatibility framebuffer can't cover more than half of PCI
BAR #0. The latter defaults to 64MB in size, and is controlled by
"ram_size_mb".
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15288 6f19259b-4bc3-4df7-8a09-765794883524
The field name "ModeNumber" in QEMU_VIDEO_MODE_DATA is misleading -- it is
not immediately obvious whether this field carries a client-visible mode
number, in the GOP sense, or an internal, card type specific mode index.
After checking all references, rename the field to "InternalModeIndex".
Also, when filling in the card type independent QEMU_VIDEO_MODE_DATA array
from the card type specific mode array, distinguish the GOP mode number
from the internal mode index in the debug message.
This patch effects no functional changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15287 6f19259b-4bc3-4df7-8a09-765794883524
Currently, QemuVideoGraphicsOutputQueryMode() reports EFI_NOT_STARTED when
this boolean field is set.
However, QemuVideoGraphicsOutputQueryMode() is only available to callers
after the GOP interface has been installed. That in turn implies that the
following partial call tree has succeeded without errors:
QemuVideoControllerDriverStart()
QemuVideoGraphicsOutputConstructor()
QemuVideoGraphicsOutputSetMode(... 0 ...)
HardwareNeedsStarting = FALSE
InstallMultipleProtocolInterfaces(... GOP ...)
That is, when QemuVideoGraphicsOutputQueryMode() is reached,
HardwareNeedsStarting is always FALSE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15286 6f19259b-4bc3-4df7-8a09-765794883524
A bus driver needs to pay attention whether its Stop() function is being
called on the "main" controller handle (NumberOfChildren == 0) or on the
child handles (NumberOfChildren > 0).
In QemuVideoDxe, all our resources are associated with the one child
handle (and the Private data structure) *except* the top-level PciIo
protocol reference. Be conscious of which mode Stop() is being called for.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15284 6f19259b-4bc3-4df7-8a09-765794883524
A bus driver is allowed to ignore the actual value of RemainingDevicePath
in Supported() and Start(), and to produce all child handles at once.
This in effect means the following invariants for QemuVideoDxe:
- (RemainingDevicePath == NULL), and
- (Private->GopDevicePath != NULL)
Simplify Supported() and Start() by substituting constant TRUE and FALSE
(as appropriate) in expressions that check RemainingDevicePath and/or
Private->GopDevicePath.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15283 6f19259b-4bc3-4df7-8a09-765794883524
In QemuVideoControllerDriverStart():
- remove redundant zero-initialization of:
- Private->Handle (2 locations)
- Private->GopDevicePath (when at devpath end)
- remove fields used for error handling only:
- PciAttributesSaved
- tigthen scope of temporaries:
- MmioDesc
- AcpiDeviceNode
- supplement missing error checks:
- AppendDevicePathNode() can fail with out-of-memory (2 locations)
- when installing GopDevicePath
- retval of QemuVideoGraphicsOutputConstructor() (can justifiedly fail
with out-of-resources)
- plug leaks on error:
- free GopDevicePath (AppendDevicePathNode() allocates dynamically)
- uninstall GopDevicePath
- free Private->ModeData
- call QemuVideoGraphicsOutputDestructor()
- uninstall GOP
In QemuVideoGraphicsOutputConstructor(), called by Start():
- supplement missing error checks:
- QemuVideoGraphicsOutputSetMode() retval (it can fail with
out-of-resources)
- plug leaks on error:
- free Mode->Info
- free Mode
In QemuVideoCirrusModeSetup() and QemuVideoBochsModeSetup(), both called
by Start():
- supplement missing error checks:
- AllocatePool() can fail in both
In QemuVideoGraphicsOutputDestructor(), called by Start() on the error
path:
- plug leaks:
- free Private->LineBuffer, which is allocated in
Start() -> Constructor() -> SetMode()
In QemuVideoGraphicsOutputSetMode(), called by Start() indirectly:
- remove redundant zero-assignment to:
- Private->LineBuffer
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15282 6f19259b-4bc3-4df7-8a09-765794883524
The BOOLEAN IsFinal variable initialization isn't properly seen by
MSVC. To make it compile OVMF the variable needs to be initialized.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Mauro Faccenda <faccenda@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15214 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni
Laszlo Ersek
Volker Rümelin
Ard Biesheuvel
Jordan Justen
Star Zeng
Alcantara, Paulo
James Bottomley
Gary Lin
Dandan Bi
Liming Gao
Paolo Bonzini
Michael Kinney
Stefano Stabellini
Reza Jelveh
Bill Paul
Jiaxin Wu
Bruce Cran
Gerd Hoffmann
Paulo Alcantara
Gabriel Somlo
Andrew Fish
Daryl McDaniel
Scott Duplichan
Anthony PERARD
Samuel Thibault
Steven Smith
Mauro Faccenda