FillExchangeInfoData() is used to fill MP_CPU_EXCHANGE_INFO date exchanged
between C code and assembly code of AP reset vector.
v5:
1. Reference ApWakeupFunction instead of ApCFunction.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
ApWakeupFunction() is the first C function executed from AP reset vector. When
APs waken up at the first time, it will sync BSP's MTRR setting and load
microcode on APs and collect APs' BIST information.
When AP tasked finished, it will place APs it one loop specified by ApLoopMode.
v5:
1. Rename ApCFunction to ApWakeupFunction to meet naming convention.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, searching unallocated memory under in
EFI_HOB_TYPE_RESOURCE_DESCRIPTOR hobs to find the memory under 1MB for AP reset
vector. After End of PEI event triggered, we need to restore original the buffer
contents to avoid crash the OS on S3 boot.
In DxeMpInitLib, allocate the memory under 1MB for AP reset vector.
Add helper functions AllocateResetVector()/FreeResetVector() used by WakeupAp().
v3:
1. Move SetTimer() from Patch #17 to Patch 16.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In DxeMpInitLib, register one period event callback function CheckAPsStatus()
used to check AP Status.
v5:
1. Introduce AP_CHECK_INTERVAL for adjust AP check timer interval potential.
v3:
1. Use CamelCase for mCheckAllAPsEvent, mStopCheckAllApsStatus and
CheckAndUpdateApsStatus().
2. Move SetTimer() from Patch #17 to Patch 16.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, register End of PEI callback function CpuMpEndOfPeiCallback().
v5:
1. Add comment block for mMpInitLibNotifyList.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In PeiMpInitLib, save CPU MP Data pointer into one local Guided HOB.
In DxeMpInitLib, save CPU MP Data pointer into one global variable.
Add helper functions GetCpuMpData()/SaveCpuMpData().
v5:
1. Move CPU_INIT_MP_LIB_HOB_GUID from MpLib.c to MpLib.h to make
all C files visible.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add CPU_VOLATILE_REGISTERS definitions for CRx and DRx required to be restored
after APs received INIT IPI.
Add worker functions SaveVolatileRegisters()/RestoreVolatileRegisters() used to
save/restore CRx and DRx. It also check if Debugging Extensions supported or
not.
v5:
1. Add comment block for structure CPU_VOLATILE_REGISTERS.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Initialize CPU_AP_DATA for CPU APs and add GetApState()/SetApState() helper
functions to get/set AP state.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v5:
1. Add comment block for enum AP_INIT_STATE and structure CPU_AP_DATA.
2. Add more comment for structure CPU_INFO_IN_HOB.
3. Add more clarification in structure _CPU_MP_DATA for those fields
pass from PEI to DXE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Firstly, get ApLoopMode from PcdCpuApLoopMode. If MonitorMwait feature is not
supported, update ApLoopMode to ApHltLoop. If MonitorMwait feature is supported,
get MointorFilter size by CPUID.[EAX=05H]:EBX.BIT0-15.
v5:
1. Add comment block for enum AP_LOOP_MODE.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
In MpInitLibInitialize(), invoke AsmGetAddress() to get get assembly functions'
entry addresses and the sizes from returned MP_ASSEMBLY_ADDRESS_MAP structure.
v5:
1. Add more detailed comments for structure MP_ASSEMBLY_ADDRESS_MAP.
v4:
1. Add AsmRelocateApLoop information return in AsmGetAddress().
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
AsmRelocateApLoop() is used to place APs into MWAIT-loop if MonitorMwait
feature is supported before hand-off to OS, or place APs into HLT-loop if
MonitorMwait feature is not supported.
If the current mode is long mode, we will switch APs to protected mode
before placing APs in MWAIT-loop or HLT-loop. Thus, once APs wakeup from
loop, APs needn't the page table that may be crashed by OS.
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
2. Fix typo Proteced to Protected.
3. Fix typo segement to segment
4. Use word MONITOR instead of mwait-monitor.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
EnableExecuteDisable in MP_CPU_EXCHANGE_INFO is used to tell AP reset vector if
enable execute disable feature on APs. This feature should be enabled before CR3
is written.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add assembly code for AP reset vector and the definition of MP_CPU_EXCHANGE_INFO
that are used to exchange the data between C code and assembly code when AP wake
up.
v4:
1. Copy MP_CPU_EXCHANGE_INFO from UefiCpuPkg/CpuMpPei/CpuMpPei.h
2. Copy MpEqu.inc and MpFuncs.nasm from UefiCpuPkg/CpuMpPei.
v3:
1. Rename NumApsExecutingLoction to NumApsExecutingLocation
2. Add whitespace after ; in .nasm file
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add two MP Initialize Library instances PeiMpInitLib.inf and DxeMpInitLib.inf
with NULL implementation.
One PeiMpInitLib.inf is consumed by PEI MP driver. Another DxeMpInitLib.inf is
consumed by DXE MP driver.
Place MpInitLibStartupAllAPs()/MpInitLibStartupThisAp()/MpInitLibSwitchBSP()/
MpInitLibEnableDisableAP() into PeiMpLib.c and DxeMpLib.c, because they have
the different implementations and will be updated in latter patches.
v5:
1. Add back PeiExceptionHandlerLib.inf in UefiCpuPkg.dsc. It is removed
incorrectly.
v4:
1. Return EFI_UNSUPPORTED instead of EFI_SUCCESS for NULL implementation of
all Functions.
2. Sync MpInitLibxxx functions header updating described in v4 part of Patch
#4.
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
MP Initialize library provides basic functionalities to do APs initialization,
to manage MP information and to wakeup APs to execute AP task.
It could be consumed by CPU MP PEI or DXE drivers to provide CPU MP PPI/Protocol
services.
v4:
1. MpInitLibGetProcessorInfo():
Update HealthData type from UINT32 to EFI_HEALTH_FLAGS.
Add #include <Ppi/SecPlatformInformation.h>
2. MpInitLibSwitchBSP():
Return EFI_DEVICE_ERROR instead of EFI_SUCCESS if the calling processor is
an AP.
3. MpInitLibStartupThisAP():
Fix several incorrect references to "APs" to match PI spec.
4. MpInitLibSwitchBSP() and MpInitLibEnableDisableAP():
Fix incorrect description on ProcessorNumber.
5. Trim whitespace at end of line.
v3:
1. Add whitespace after MpInitLibInitialize
2. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Currently, we will allocate StartupVector buffer under 1MB at entry point
function. But some modules may allocate some hard code address under 1MB.
For example, LegacyBiosDxe driver tries to manage some legacy range under
640KB.
To avoid the conflicts, we move StartupVector buffer allocation to End Of
DXE event callback function.
v4:
Update the Context parameter is used as a pointer to AcpiCpuDataEx, then
we needn't to add the global variable.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add microcode definitions defined in Intel(R) 64 and IA-32 Architectures
Software Developer's Manual Volume 3A, Section 9.11.
v4:
1. ProcessorSignature type changed to CPU_MICROCODE_PROCESSOR_SIGNATURE
2. Add pack(1) for structure CPU_MICROCODE_HEADER and
CPU_MICROCODE_EXTENDED_TABLE.
v3:
1. Update SDM date to June, 2016
2. Mention BCD format in CPU_MICROCODE_DATE
3. Rename ProcessorChecksum to Checksum to match SDM.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
#define MSR_IA32_APIC_BASE_ADDRESS is duplicated with #define MSR_IA32_APIC_BASE
defined in UefiCpuPkg/Include/Register/ArchitecturalMsr.h, so we could remove it
and update the modules to use MSR_IA32_APIC_BASE from ArchitecturalMsr.h.
Structure MSR_IA32_APIC_BASE conflicts with #define MSR_IA32_APIC_BASE defined
in UefiCpuPkg/Include/Register/ArchitecturalMsr.h, so we could remove it and
update the modules to use structure MSR_IA32_APIC_BASE_REGISTER from
ArchitecturalMsr.h.
v5:
1. Update SourceLevelDebugPkg to use APIC Base MSR from ArchitecturalMsr.h.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add the following definition in the [BuildOptions] section in package DSC
files to disable APIs that are deprecated:
[BuildOptions]
*_*_*_CC_FLAGS = -D DISABLE_NEW_DEPRECATED_INTERFACES
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
The commit 8b9311 changed the zeroing of mSmmMpSyncData of type
SMM_DISPATCHER_MP_SYNC_DATA by the following patch.
- ZeroMem (mSmmMpSyncData, mSmmMpSyncDataSize);
+ mSmmMpSyncData->SwitchBsp = FALSE;
mSmmMpSyncDataSize not only includes SMM_DISPATCHER_MP_SYNC_DATA, but
also includes the SMM_CPU_DATA_BLOCK array and one BOOLEAN variable
array as shown here:
mSmmMpSyncDataSize = sizeof (SMM_DISPATCHER_MP_SYNC_DATA) +
(sizeof (SMM_CPU_DATA_BLOCK) + sizeof (BOOLEAN)) *
gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;
This patch restores the original ZeroMem() to clear all CPU Sync data.
The commit 8b9311 may cause unexpected behavior.
v2:
Mentioned CandidateBsp array in comments to make it more accurate.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
SetMemoryAttributes() will sync BSP's MTRRs settings to all APs by StartupAllAPs
service in serial mode. It may caused much performance impact if there are too
much processors in system. This update is to invoke StartupAllAps in parallel
mode. IA32 SDM does suggest to program MTRRs in parallel mode.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Except for MtrrSetAllMtrrs(), others services are not suggested to be invoked by
APs because they are not necessary and may invoke DEBUG() to dump MTRR setting.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed: Laszlo Ersek <lersek@redhat.com>
MtrrSetAllMtrrs() maybe used by APs to sync BSP's MTRR settings. BSP's MTRR
setting should be displayed if EFI_D_CACHE flag is set when MTRR updated. In
MtrrSetAllMtrrs(), it's not necessary to display MTRR setting again due to the
MTRR settings should be always same among BSP/APs. This updating could avoid
APs output MTRR setting at the same time and make display message corrupted.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Commits 28ee581646 and 246cd9085f added these ENDs as part of the
manual conversion from *.asm files. However, the ENDs makes no sense for
NASM. Although they don't break the build, NASM complains about them:
label alone on a line without a colon might be in error
(This NASM warning category dates back to NASM 0.95, commit
6768eb71d8deb.)
Remove the ENDs.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
CheckProcessorFeature() invokes MpService->StartupAllAps() to detect
XD/BTS features on normal boot path. It's not necessary and may cause
performance impact, because INIT-SIPI-SIPI must be sent to APs if APs
are in hlt-loop mode. XD/BTS feature detection is moved to
SmmInitHandler() in SMM relocation during normal boot path.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
It will be set to TRUE during S3 resume.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
REGISTER_TYPE in UefiCpuPkg/Include/AcpiCpuData.h defines a MemoryMapped
enum value. However support for the MemoryMapped enum is missing from
the implementation of SetProcessorRegister(). This patch adds support
for MemoryMapped type SetProcessorRegister().
One spin lock is added to avoid potential conflict when multiple processor
update the same memory space.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
InitializeMpSyncData() invokes InitializeSmmCpuSemaphores() to allocate an
aligned buffer for all locks and semaphores. However, this function is
invoked on S3 resume path again to reset mSmmMpSyncData. It causes
an additional aligned buffer to be allocated.
This update moves InitializeSmmCpuSemaphores() into
InitializeMpServiceData() that is only invoked on normal boot.
InitializeMpSyncData() is updated to reset the locks/semaphore in
mSmmMpSyncData.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Remove Pmode(Entry)Offset/Lmode(Entry)Offset and use unified Mode(Entry)Offset
to clean up the definition of MP_ASSEMBLY_ADDRESS_MAP and MP_CPU_EXCHANGE_INFO.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Do not load the new GDT table and just to use the exiting BSP's GDT table set up
by SEC phase.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Using CodeSegment and DataSegment fields in ExchangeInfo instead of the hardcode
MACROs for x64 arch. Switch AP from real mode to long mode directly, so needn't
the CS/DS of protected mode.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Using CodeSegment and DataSegment fields in ExchangeInfo instead of the hardcode
MACROs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Added CodeSegment and DataSegment fields in MP_CPU_EXCHANGE_INFO. They are set
to the values of current BSP's CS and DS.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Giri Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Verification microcode signature is one enhancement and not one requirement from
IA32 SDM. This update is just to dump debug message instead of ASSERT() if the
updated microcode signature does not match the loaded microcode signature.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Actually, there is only one microcode region in platform. If microcode has been
loaded, its signature will not be zero and should be loaded successfully.
We needn't to check microcode region and load microcode again. This update is to
skip checking/loading microcode if current microcode signature is not zero.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
- becasue to because
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
A number of code locations use
ASSERT_EFI_ERROR (BooleanExpression)
instead of
ASSERT (BooleanExpression)
Fix them.
Cc: Jeff Fan <jeff.fan@intel.com>
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Use 16bit and 32bit assembly code to replace hard code db.
In V2: add 0x67 prefixes to far jumps
Without the a32 modifier under FLAT32_JUMP, and the a16 modifier under
LONG_JUMP, nasm doesn't generate the 0x67 prefixes, and the far jumps
don't work. (For the former, KVM returns an emulation failure. For the
latter, KVM performs a triple fault (guest reboot).) By forcing the 0x67
prefixes we end up with the same machine code as the one open-coded in
"MpFuncs.asm".
This bug breaks S3 resume in the Ia32X64 + SMM_REQUIRE build of OVMF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/MpFuncs.asm to X64/MpFuncs.nasm
And, manually update it to pass build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Use 16bit assembly code to replace hard code db.
In V2:
Add 0x67 prefix to far jump
When we enter protected mode, with the far jump still in big real mode,
the JMP instruction not only needs the 0x66 prefix (for 32-bit operand
size), but also the 0x67 prefix (for 32-bit address size). Use the a32
nasm modifier to enforce this.
This bug breaks S3 resume in the Ia32 + SMM_REQUIRE build of OVMF.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/MpFuncs.asm to Ia32/MpFuncs.nasm.
And, manually update it to pass build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/AsmFuncs.asm to X64/AsmFuncs.nasm.
And, manually add o16 prefix to specify 16bit operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/AsmFuncs.asm to Ia32/AsmFuncs.nasm.
And, manually add o16 prefix to specify 16bit operation.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/ExceptionHandlerAsm.asm to X64/ExceptionHandlerAsm.nasm.
Then, manually update nasm to pass build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/ExceptionHandlerAsm.asm to Ia32/ExceptionHandlerAsm.nasm.
Then, manually update nasm to pass build.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
X64/InitializeFpu.asm to X64/InitializeFpu.nasm.
And, manually add .rdata section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/InitializeFpu.asm to Ia32/InitializeFpu.nasm.
And, manually add .rdata section.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
The BaseTools/Scripts/ConvertMasmToNasm.py script was used to convert
Ia32/CpuAsm.asm to Ia32/CpuAsm.nasm
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
This patch adds the NORETURN attribute to the function that transfers
to the PEI phase, along with an UNREACHABLE() call at the end to
avoid false warnings.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, if the memory length to be programmed is less than the remaining size
of one Fixed-MTRR supported, RETURN_UNSUPPORTED returned. This is not correct.
This is one regression at 07e8892090 when we
updated ProgramFixedMtrr() to remove the loop of calculating Fixed-MTRR Mask.
This fix will calculate Right offset in Fixed-MTRR beside left offset. It
supports small length (less than remaining size supported by Fixed-MTRR) to be
programmed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This Feature PCD causes PiSmmCpuDxe to catch SMM stack overflow at
runtime, logging a clear error message, and entering a CPU dead loop.
Compared to the chaotic and catastrophic consequences of the stack leaking
into, and corrupting, the SMM page table, a stack guard that is enabled by
default is vastly superior.
We should not require sane platforms to explicitly opt in to this
safeguard; instead, we should require platforms that prefer to live
dangerously to opt out of it.
Stack overflow in SMM might even give rise to security vulnerabilities.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/12864
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1341733
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This module could be linked by CpuMpPei driver to handle reserved vector list
and provide spin lock for BSP/APs to prevent dump message corrupted.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Move some global variables location from PeiDxeSmmCpuException.c to
DxeCpuException.c and SmmCpuException.c. And remove some un-used global
vairables.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Rename DxeSmmCpuException.c to PeiDxeSmmCpuException.c that will be used by
PeiCpuExceptionHandlerLib.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Update MSRs semaphores to the ones in allocated aligned semaphores
buffer. If MSRs semaphores is not enough, allocate one page more.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Update each CPU semaphores to the ones in allocated aligned
semaphores buffer.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Allocate each CPU semaphores in allocated aligned semaphores buffer.
And add it into semaphores structure.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Update all global semaphores to the ones in allocated aligned
semaphores buffer.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Move MP sync data initialization in front of the place that initialize
page table, because the page fault spin lock is allocated in
InitializeMpSyncData() while it is initialized in SmmInitPageTable().
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Get semaphores alignment/size requirement and allocate aligned
buffer for all global spin lock and semaphores.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
SMRR range size and alignment should follow the rules like MTRR:
a. The minimum range size is 4 KBytes and the base address of the
range must be on at least a 4-KByte boundary.
b. For ranges greater than 4 KBytes, each range must be of length
2^n and its base address must be aligned on a 2^n boundary, where
n is a value equal to or greater than 12. The base-address
alignment value cannot be less than its length.
Thus, it could meet "Address_Within_Range AND PhysMask = PhysBase
AND PhysMask".
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Use the MSR MSR_IA32_MISC_ENABLE definition defined in UefiCpuPkg/Include and
remove the local definition.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BTS used DS save area by IA32_DS_AREA MSR to get invoker IP instead of the
Last Branch Record Stack. So, removed the unnecessary BTS MSRs.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
SmmProfile feature depends on BTS feature to get the invoker IP (in SMM) from
last branch record. If this feature is not supported, SmmProfile cannot get the
invoker IP (in SMM). Per IA-32 Architectures Software Developer's Manual, BTS
feature is detected by IA32_MISC_ENABLE. If BIT11 of IA32_MISC_ENABLE is set,
BTS is not supported. But current implementation check BIT11 opposite. Also, BTS
feature does not depends on PEBS feature if supported or not.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Shifflett, Joseph <joseph.shifflett@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Introduce the 32bit mask seeds to calculate Fixed-MTRR or&and mask values. It
could avoid the loop operation and 64bit shift operations.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add input fixed-MTRR MSR index to be start MSR index to avoid finding fixed-MTRR
MSR index from 0 at each time.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
* Short description:
The CpuIoServiceRead() and CpuIoServiceWrite() functions transfer data
between memory and IO ports with individual Io(Read|Write)(8|16|32)
function calls, each in an appropriately set up loop.
On the Ia32 and X64 platforms however, FIFO reads and writes can be
optimized, by coding them in assembly, and delegating the loop to the
CPU, with the REP prefix.
On KVM virtualization hosts, this difference has a huge performance
impact: if the loop is open-coded, then the virtual machine traps to the
hypervisor on every single UINT8 / UINT16 / UINT32 transfer, whereas
with the REP prefix, KVM can transfer up to a page of data per VM trap.
This is especially noticeable with IDE PIO transfers, where all the data
are squeezed through IO ports.
* Long description:
The RootBridgeIoIoRW() function in
PcAtChipsetPkg/PciHostBridgeDxe/PciRootBridgeIo.c
used to have the exact same IO port acces optimization, dating back
verbatim to commit 1fd376d9792:
PcAtChipsetPkg/PciHostBridgeDxe: Improve KVM FIFO I/O read/write
performance
OvmfPkg cloned the "PcAtChipsetPkg/PciHostBridgeDxe" driver (for
unrelated reasons), and inherited the optimization from PcAtChipsetPkg.
The "PcAtChipsetPkg/PciHostBridgeDxe" driver was ultimately removed in
commit 111d79db47:
PcAtChipsetPkg/PciHostBridge: Remove PciHostBridge driver
and OvmfPkg too was rebased to the new core Pci Host Bridge Driver, in
commit 4014885ffd:
OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe
This caused the optimization to go lost. Namely, the
RootBridgeIoIoRead() and RootBridgeIoIoWrite() functions in the new core
Pci Host Bridge Driver delegate IO port accesses to
EFI_CPU_IO2_PROTOCOL. And, in OvmfPkg (and likely most other Ia32 / X64
edk2 platforms), this protocol is provided by "UefiCpuPkg/CpuIo2Dxe",
which lacks the optimization.
Therefore, this patch ports the C source code logic from commit
1fd376d979 (see above) to "UefiCpuPkg/CpuIo2Dxe", plus it ports the
NASM-converted assembly helper functions from OvmfPkg commits
6026bf4600 and ace1d0517b65:
OvmfPkg PciHostBridgeDxe: Convert Ia32/IoFifo.asm to NASM
OvmfPkg PciHostBridgeDxe: Convert X64/IoFifo.asm to NASM
In order to support the MSFT and INTEL toolchains as well, the *.asm
files are ported from OvmfPkg as well, immediately from before the above
conversion (that is, at 6026bf460037^).
* Notes about the port:
- The write and read branches from commit 1fd376d979 are split to the
separate functions CpuIoServiceWrite() and CpuIoServiceRead().
- The EfiPciWidthUintXX constants are replaced with EfiCpuIoWidthUintXX.
- The cast expression "(UINTN) Address" is replaced with
"(UINTN)Address" (i.e., no space), because that's how the receiving
functions spell it as well.
- The labels in the switch statements are unindented by one level, to
match the edk2 coding style (and the rest of UefiCpuPkg) better.
* The first signoff belongs to Jordan, because he authored all of
1fd376d979, 6026bf4600 and ace1d0517b.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://www.redhat.com/archives/vfio-users/2016-April/msg00029.html
Reported-by: Mark <kram321@gmail.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/10424/focus=10432
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Mark <kram321@gmail.com>
Tested-by: Mark <kram321@gmail.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
If ApLoopMode is set to ApInMwaitLoop, AP will be placed into C-State by mwait
instruction. BSP will wakeup AP by write start-up signal in monitor address.
However, AP maybe waken by SMI/NMI/MCE and other condition. On this case, AP
will check if BSP wants to wakeup itself really. If not, AP will continue to
execute mwait to C-State.
One potential issue: BSP may not recognize AP was wakeup from C-State by other
event and BSP still writes start-up signal to wakeup AP. But AP does not aware
it and still execute mwait instruction to C-State. So, AP cannot be wakeup on
this case.
This fix is let AP to clear start-up signal when it really is wakeup to execute
AP function. And BSP will write start-up signal till AP clears it.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Add Intel SGX Resource Enumeration Leaves as described by Section 37.7 in
Intel(R) 64 and IA-32 Architectures Software Developer's Manual, Volume 3D,
December 2015.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Remove variable TempQWord that is declared, assigned but never referenced.
This fixes a warning emitted by GCC when -Wunused-but-set-variable is in
effect.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add top level MSR include file that includes the Architecural MSR
include file and all family specific MSR files from the Msr
subdirectory
Intel(R) 64 and IA-32 Architectures Software Developer's
Manual, Volume 3, December 2015, Chapter 35
Model-Specific-Registers (MSR).
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add Pentium M MSRs from:
Intel(R) 64 and IA-32 Architectures Software Developer's
Manual, Volume 3, December 2015, Chapter 35
Model-Specific-Registers (MSR), Section 35-18.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add Xeon Processor D MSRs from:
Intel(R) 64 and IA-32 Architectures Software Developer's
Manual, Volume 3, December 2015, Chapter 35
Model-Specific-Registers (MSR), Section 35-13.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add Atom MSRs from:
Intel(R) 64 and IA-32 Architectures Software Developer's
Manual, Volume 3, December 2015, Chapter 35
Model-Specific-Registers (MSR), Section 35-3.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
UefiCpuPkg/Application/Cpuid: Remove unnecessary code check
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
UefiCpuPkg/Application/Cpuid: Remove unnecessary code check
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Currently, PcdCpuMaxLogicalProcessorNumber only supports fixed type. There are
some requests on this PCD to support dynamic type also. For example, platform
may dynamically set this PCD to actual processor count to save memory or improve
boot performance.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Change DisplayFamily/DisplayModel type to UINT32 to avoid different size in
bitwise operation.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
gMaximumBasicFunction is set to CPUID_SIGNATURE as below, so removed the compare
code.
UINT32 gMaximumBasicFunction = CPUID_SIGNATURE;
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Current implementation only loads the latest revision if there is no microcode
loaded. Per IA32 User Manual, we should load the newer revision by comparing
the existing microcode loaded with the updating revision.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
define PRINT_BIT_FIELD(Variable, FieldName) \
Print (L"%5a%42a: %x\n", #Variable, #FieldName, \
##Variable.Bits.##FieldName);
The above definition in UefiCpuPkg/Application/Cpuid/Cpuid.c
will cause GCC build error.
Fix it with:
define PRINT_BIT_FIELD(Variable, FieldName) \
Print (L"%5a%42a: %x\n", #Variable, #FieldName, \
Variable.Bits.FieldName);
The '.' has its origin meaning as a member operator in the define
statement. Thus, the token-pasting operator '##' is not necessary here.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Add UEFI application to UefiCpuPkg to display all supported CPUID
leafs and sub-leafs described by UefiCpuPkg/Include/Register/Cpuid.h
that is based on information from Intel(R) 64 and IA-32
Architectures Software Developer's Manual, Volume 2A, December
2015, CPUID instruction.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Add CPUID leaf and sub-leaf indexes and structures as described by
Intel(R) 64 and IA-32 Architectures Software Developer's Manual,
Volume 2A, December 2015, CPUID instruction.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
If XD is supported, then SMM enables it. The non-SMM execution
environment can choose to enable or disable XD, so the state of
XD must be detected in each SMI and be enabled/restored.
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The function CheckFeatureSupported() is used as an EFI_AP_PROCEDURE
in the MP Services Protocol service StartAllAPs(). Any function
used as an EFI_AP_PROCEDURE must use EFIAPI calling convention.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update S3 resume path to initialize the fields of gSmst before
the gSmst fields are used to complete initialization in S3 resume.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19504 6f19259b-4bc3-4df7-8a09-765794883524
Use Bit 29 of CPUID leaf CPUID_EXTENDED_CPU_SIG (0x80000001) to
determine the SMM save state mode. The previous version of this
code used CPUID leaf CPUID_VERSION_INFO (0x00000001).
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19503 6f19259b-4bc3-4df7-8a09-765794883524
If PcdCpuSmmDebug is set to TRUE, then the first time the function
CpuSmmDebugEntry () is called during the first normal SMI, the
registers DR6 or DR7 may be set to invalid values due to gSmst
not being fully initialized yet. Instead, use gSmmCpuPrivate that
is fully initialized for the first SMI to look up CpuSaveState
for the currently executing CPU.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19502 6f19259b-4bc3-4df7-8a09-765794883524
If ApLoopMode is ApInHltLoop, BSP will send INIT-SIPI-SIPI to wake up APs.
If ApLoopMode is ApInMwaitLoop or ApInRunLoop, BSP will write one semaphore to
wake up APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19346 6f19259b-4bc3-4df7-8a09-765794883524
After AP function is executed, we will place AP in proper loop mode. Because AP
maybe waken up by SMI or other reasons. We need to read signature in monitor
buffer to check if APs is waken up by BSP. If it is not waken up by BSP, we will
continue to place them into proper loop mode.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19345 6f19259b-4bc3-4df7-8a09-765794883524
Get AP loop mode to prepare for the monitor buffer required for ApInMwaitLoop
and ApInRunLoop.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19344 6f19259b-4bc3-4df7-8a09-765794883524
Add GetApLoopMode() that will get PCD PcdCpuApLoopMode firstly. If it is
ApInMwaitLoop, we will check if MONITOR/MWAIT feature supported by CPUID. If
MONITOR/MWAIT feature is not supported, force AP loop mode to ApInHltLoop.
GetApLoopMode() also return the largest line size required.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19343 6f19259b-4bc3-4df7-8a09-765794883524
This new PCD is used to specify the AP C-state value by MWAIT instruction.
More deeper C-state means more longer latency time when APs exiting from MWAIT
state. Platforms need to balance the performance and power saving to find the
proper C-state for APs.
Also, some processor may not ready for the deepest C-state at the beginning.
Platform also could choose the proper chance to place AP into the deeper C-state
by set this PCD before hand-off to OS.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19342 6f19259b-4bc3-4df7-8a09-765794883524
This new PCD is used to specify the AP loop mode during POST phase.
The value 1 means we will place AP in the Hlt-Loop state by HLT instruction.
BSP need to send INIT-SIPI-SIPI to wake up APs.
The value 2 means we will place AP in the deepest C-state by MWAIT instruction.
BSP need to modify the monitor buffer by MONITOR instruction to wake up APs.
The value 3 means we will place AP in the Run-loop state. APs are running.
BSP need to write one semaphore to wake up APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19341 6f19259b-4bc3-4df7-8a09-765794883524
Packing alignment for MP_CPU_EXCHANGE_INFO should be 1. This should be typo when
check-in CpuMpPei driver. IA32 arch MP_CPU_EXCHANGE_INFO is luckly pack(1). It
leads CpuMpPei x64 version hung.
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19340 6f19259b-4bc3-4df7-8a09-765794883524
To convert these files I ran:
$ python3 BaseTools/Scripts/ConvertUni.py UefiCpuPkg
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19264 6f19259b-4bc3-4df7-8a09-765794883524
'.' should be '_'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19226 6f19259b-4bc3-4df7-8a09-765794883524
Add new API MtrrSetMemoryAttributeInMtrrSettings() in MtrrLib. Platform could
use this API to set MTRR setting into local MTRR settings buffer instead of
MTRRs. At last, platform could use MtrrSetAllMtrrs() to set the MTRR settings
into MTRRs totally. It could improve MTRRs programming performance obviously,
specially when platform is going to program a set of MTRRs.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19162 6f19259b-4bc3-4df7-8a09-765794883524
MtrrDebugPrintAllMtrrsWorker() provides the capability to dump the MTRR setting
from MTRRs or the input MTRR settings buffer.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19161 6f19259b-4bc3-4df7-8a09-765794883524
When MtrrSetMemoryAttribute() programs variable MTRRs, it may disable/enable
cache and disable/enable MTRRs several times. This updating tries to do
operation in local variable and does the hardware initialization one time only.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19158 6f19259b-4bc3-4df7-8a09-765794883524
When MtrrSetMemoryAttribute() programs fixed MTRRs, it may disable/enable cache
and disable/enable MTRRs several times. This updating tries to do operation in
local variable and does the hardware initialization one time only.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19157 6f19259b-4bc3-4df7-8a09-765794883524
Add function to shadow the content of variable MTRRs into an internal array:
VariableMtrr. And used MtrrGetMemoryAttributeInVariableMtrrWorker() in other
functions.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19156 6f19259b-4bc3-4df7-8a09-765794883524
Try to make use of worker functions to get MTRRs count. It could avoid invoking
IsMtrrSupported() for many times.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19155 6f19259b-4bc3-4df7-8a09-765794883524
Only adjust functions order and there is no any real functionality impact.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19154 6f19259b-4bc3-4df7-8a09-765794883524
Abstract some worker functions not to invoke IsMtrrSupported(). They could be
used by other functions to reduce the number of invoking times on
IsMtrrSupported().
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19153 6f19259b-4bc3-4df7-8a09-765794883524
Current MtrrLib reserves 2 variable MTRRs for some legacy OS boot (CSM boots)
may require some MTRRs to be reserved for OS use. But UEFI OS boot will not use
MTRRs.
Per Scott's suggestion in
link: http://article.gmane.org/gmane.comp.bios.edk2.devel/4099
Add one PCD PcdCpuNumberOfReservedVariableMtrrs to specify the number of
variable MTRRs reserved for OS use. Setting its default value to 2 is for
back-compatibility.
Cc: Scott Duplichan <scott@notabs.org>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Suggested-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19151 6f19259b-4bc3-4df7-8a09-765794883524
PeiStartupAllAPs()/PeiStartupThisAP() will send INIT-SIPI-SIPI to wakeup APs to
execute AP function. However, some registers will be reset after APs received
INIT IPI. We need to restore some registers (For example, CRx/DRx) manually
after APs wakeup.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19089 6f19259b-4bc3-4df7-8a09-765794883524
Save BSP's volatile register and sync CRx register to APs when AP 1st wake up.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19088 6f19259b-4bc3-4df7-8a09-765794883524
Add CPU_VOLATILE_REGISTERS definitions for CRx and DRx required to be restored
after APs received INIT IPI.
Add worker functions SaveVolatileRegisters()/RestoreVolatileRegisters() used to
save/restore CRx and DRx. It also check if Debugging Extensions supported or
not.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19086 6f19259b-4bc3-4df7-8a09-765794883524
Current implementation only exchanges the APIC ID and BIST, this updating is to
exchange all CPU data.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@Intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19085 6f19259b-4bc3-4df7-8a09-765794883524
So that we can use write-protection for code later.
It is REPOST.
It includes suggestion from Michael Kinney <michael.d.kinney@intel.com>:
- "For IA32 assembly, can we combine into a single OR instruction that
sets both page enable and WP?"
- "For X64, does it make sense to use single OR instruction instead of 2
BTS instructions as well?"
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Suggested-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19068 6f19259b-4bc3-4df7-8a09-765794883524
So that we can use write-protection for code later.
This is REPOST.
It includes the bug fix from "Paolo Bonzini" <pbonzini@redhat.com>:
Title: fix generation of 32-bit PAE page tables
"Bits 1 and 2 are reserved in 32-bit PAE Page Directory Pointer Table
Entries (PDPTEs); see Table 4-8 in the SDM. With VMX extended page
tables, the processor notices and fails the VM entry as soon as CR0.PG
is set to 1."
And thanks "Laszlo Ersek" <lersek@redhat.com> to validate the fix.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Signed-off-by: "Paolo Bonzini" <pbonzini@redhat.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
Cc: "Paolo Bonzini" <pbonzini@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19067 6f19259b-4bc3-4df7-8a09-765794883524
SmmCpuFeaturesCompleteSmmReadyToLock() is a hook point to
allow CPU specific code to do more registers setting after
the gEfiSmmReadyToLockProtocolGuid notification is completely
processed.
SmmCpuFeaturesAllocatePageTableMemory() is an API to allow
CPU to allocate a specific region for storing page tables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Laszlo Ersek" <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18979 6f19259b-4bc3-4df7-8a09-765794883524
Always set RW+P bit for page table by default.
So that we can use write-protection for code later.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18960 6f19259b-4bc3-4df7-8a09-765794883524
Add NULL func for 2 new APIs in SmmCpuFeaturesLib.
SmmCpuFeaturesCompleteSmmReadyToLock() is a hook point to allow
CPU specific code to do more registers setting after
the gEfiSmmReadyToLockProtocolGuid notification is completely processed.
Add SmmCpuFeaturesCompleteSmmReadyToLock() to PerformRemainingTasks() and PerformPreTasks().
SmmCpuFeaturesAllocatePageTableMemory() is an API to allow
CPU to allocate a specific region for storing page tables.
All page table allocation will use AllocatePageTableMemory().
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18958 6f19259b-4bc3-4df7-8a09-765794883524
We had better separate code from data in tile in page level,
so that other program may use page level protection on that.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18957 6f19259b-4bc3-4df7-8a09-765794883524
This module initializes the ACPI_CPU_DATA structure and registers the
address of this structure in the PcdCpuS3DataAddress PCD. This is a
generic/simple version of this module. It does not provide a machine
check handler or CPU register initialization tables for ACPI S3 resume.
It also only supports the number of CPUs reported by the MP Services
Protocol, so this module does not support hot plug CPUs. This module
can be copied into a CPU specific package and customized if these
additional features are required.
This patch series is in response to the OvmfPkg patch series from
Laszlo Ersek that enables SMM on OVMF. The v4 version of the patch
series from Laszlo includes an OVMF specific CPU module to initialize
the ACPI_CPU_DATA structure.
This proposed patch series replaces the patches listed below.
[PATCH v4 27/41] OvmfPkg:
add skeleton QuarkPort/CpuS3DataDxe
[PATCH v4 28/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.StartupVector
[PATCH v4 29/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle IDT, GDT and MCE in ACPI_CPU_DATA
[PATCH v4 30/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle StackAddress and StackSize
[PATCH v4 31/41] OvmfPkg:
import CpuConfigLib header from Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg
[PATCH v4 32/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.NumberOfCpus
[PATCH v4 33/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: fill in ACPI_CPU_DATA.MtrrTable
[PATCH v4 34/41] OvmfPkg:
QuarkPort/CpuS3DataDxe: handle register tables in ACPI_CPU_DATA
[PATCH v4 35/41] OvmfPkg:
port CpuS3DataDxe to X64
patch originally authored by Paolo Bonzini
[PATCH v4 36/41] OvmfPkg:
build QuarkPort/CpuS3DataDxe for -D SMM_REQUIRE
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18951 6f19259b-4bc3-4df7-8a09-765794883524
Provide a more detailed description of each field of the
ACPI_CPU_DATA and CPU_REGISTER_TABLE structures.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: "Fan, Jeff" <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18950 6f19259b-4bc3-4df7-8a09-765794883524
SmmDebug feature is implemented in ASM, which is not easy to maintain.
So we move it to C function.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18946 6f19259b-4bc3-4df7-8a09-765794883524
In this way, we can centralize the silicon configuration in
PerformRemainingTasks()/PerformPreTasks() function.
If there are more features need to be configured, they can put in
PerformRemainingTasks()/PerformPreTasks() only.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
Reviewed-by: "Laszlo Ersek" <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18938 6f19259b-4bc3-4df7-8a09-765794883524
Move Gdt initialization from InitializeMpServiceData() to CPU Arch specific function.
We create SmmFuncsArch.c for hold CPU specific function, so that
EFI_IMAGE_MACHINE_TYPE_SUPPORTED(EFI_IMAGE_MACHINE_X64) can be removed.
For IA32 version, we always allocate new page for GDT entry, for easy maintenance.
For X64 version, we fixed TssBase in GDT entry to make sure TSS data is correct.
Remove TSS fixup for GDT in ASM file.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18937 6f19259b-4bc3-4df7-8a09-765794883524
TSS segment should use (SIZE - 1) as limit, and do not set G bit (highest bit of LimitHigh) because limit means byte count.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: "Fan, Jeff" <jeff.fan@intel.com>
Reviewed-by: "Kinney, Michael D" <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18935 6f19259b-4bc3-4df7-8a09-765794883524
If x2APIC flag is set, enable x2APIC mode on all APs and BSP. Before we wakeup
APs to enable x2APIC mode, we should wait all APs have finished initialization.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18934 6f19259b-4bc3-4df7-8a09-765794883524
If there are any logical processor reporting an APIC ID of 255 or greater, set
X2ApicEnable flag.
GetInitialApicId() will return x2APIC ID if CPUID leaf B supported.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18933 6f19259b-4bc3-4df7-8a09-765794883524
The CpuDxe driver may run before the gEfiMetronomeArchProtocolGuid
protocol is installed. gBS->Stall does not work until this arch
protocol is installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18914 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
We need to check if SmmFeatureControl support or not by checking
SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP.
Because MSR_SMM_MCA_CAP is SMM-RO register, we should move this check from
SmmCpuFeaturesLibConstructor (non-SMM) to SmmCpuFeaturesInitializeProcessor
(SMM).
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18906 6f19259b-4bc3-4df7-8a09-765794883524
Bit SMM_Code_Access_Chk (SMM-RO) in MSR_SMM_MCA_CAP is defined in SDM.
If set to 1 indicates that the SMM code access restriction is supported and the
MSR_SMM_FEATURE_CONTROL is supported.
If this bit is not set, we needn't to access register SmmFetureControl.
Otherwise, #GP exception may happen.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18905 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module is using PcdFrameworkCompatibilitySupport to
provide compatibility with the SMM support in the IntelFrameworkPkg.
This change removes the Framework compatibility and requires all SMM
modules that provide SMI handlers to follow the PI Specification.
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18726 6f19259b-4bc3-4df7-8a09-765794883524
In ConfigSmmCodeAccessCheck(), we used gSmst->CurrentlyExecutingCpu to get the
current SMM BSP. But ConfigSmmCodeAccessCheck() maybe invoked before executing
SmmCoreEntry() and gSmst->CurrentlyExecutingCpu hasn't been updated to the
latest value. The code flow is as below:
BSPHandler()
gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu = CpuIndex;
//
// when mRestoreSmmConfigurationInS3 is set:
//
ConfigSmmCodeAccessCheck()
//
// reads gSmst->CurrentlyExecutingCpu to early
//
gSmmCpuPrivate->SmmCoreEntry (&gSmmCpuPrivate->SmmCoreEntryContext)
//
// sets gSmst->CurrentlyExecutingCpu with CopyMem() too late
//
CopyMem (&gSmmCoreSmst.SmmStartupThisAp,
SmmEntryContext, sizeof (EFI_SMM_ENTRY_CONTEXT));
Instead, we should use
gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu directly.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18715 6f19259b-4bc3-4df7-8a09-765794883524
The LocalApicLib does not provide a function to manage the state of the
Local APIC SoftwareEnable bit in the Spurious Vector register. There
are cases where this bit needs to be managed without side effects to.
other Local APIC registers. One use case is in the DebugAgent in the
SourceLevelDebugPkg.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18711 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module makes some assumptions about GDT selectors
that are based on the GDT layout from the DxeIplPeim. For example,
the protected mode entry code and (where appropriate) the long mode
entry code in the UefiCpuPkg/PiSmmCpuDxeSmm/*/MpFuncs.* assembly
files, which are used during S3 resume, open-code segment selector
values that depend on DxeIplPeim's GDT layout.
This updates the CpuDxe module to use the same GDT layout as the
DxeIplPeim. This enables modules that are dispatched after
CpuDxe to find, and potentially save and restore, a GDT layout that
matches that of DxeIplPeim. The DxeIplPeim has a 2 GDT entries for
data selectors that are identical. These are LINEAR_SEL (GDT Offset
0x08)and LINEAR_DATA64_SEL (GDT offset 0x30). LINEAL_SEL is used for
for IA32 DXE and the LINEAR_DATA64_SEL is used for X64 DXE. This
duplicate data selector was added to the CpuDxe module to keep the
GDT and all selectors consistent.
Using a consistent GDT also improves debug experience.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Link: http://article.gmane.org/gmane.comp.bios.edk2.devel/3568
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18710 6f19259b-4bc3-4df7-8a09-765794883524
Add support for the reading and writing MSR_SMM_FEATURE_CONTROL
through the SmmCpuFeaturesIsSmmRegisterSupported(),
SmmCpuFeaturesGetSmmRegister(), and SmmCpuFeaturesSetSmmRegister()
functions. This MSR is supported if the Family/Model is 06_3C,
06_45, or 06_46.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18690 6f19259b-4bc3-4df7-8a09-765794883524
PcdSet## has no error status returned, then the caller has no idea about
whether the set operation is successful or not. PcdSet##S were added to
return error status and PcdSet## APIs were put in ifndef
DISABLE_NEW_DEPRECATED_INTERFACES condition. To adopt PcdSet##S and
further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined,
we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii
PCD set failure is a legal case. So for DynamicDefault, we add assert
when set failure. For DynamicHii, we add logic to handle it.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18686 6f19259b-4bc3-4df7-8a09-765794883524
The PiSmmCpuDxeSmm module does not use any services from the SmmLib.
This change removes the SmmLib from PiSmmCpuDxeSmm module and also
removes the lib mapping in the UefiCpuPkg DSC file because no other
modules in the UefiCpuPkg use the SmmLib.
Removal of SmmLib is now possible because the only API call to it,
ClearSmi(), was ultimately removed from PiSmmCpuDxeSmm -- see the
"BUGBUG" comment in git commit 529a5a86.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18673 6f19259b-4bc3-4df7-8a09-765794883524
Add the PiSmmCpuDxeSmm module to the UefiCpuPkg DSC file along
with this modules dependent libraries.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18648 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18647 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18646 6f19259b-4bc3-4df7-8a09-765794883524
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
Changes between [PATCH v1] and [PATCH v2]:
1) Swap PTE init order for QEMU compatibility.
Current PTE initialization algorithm works on HW but breaks QEMU
emulator. Update the PTE initialization order to be compatible
with both.
2) Update comment block that describes 32KB SMBASE alignment requirement
to match contents of Intel(R) 64 and IA-32 Architectures Software
Developer's Manual
3) Remove BUGBUG comment and call to ClearSmi() that is not required.
SMI should be cleared by root SMI handler.
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
[pbonzini@redhat.com: InitPaging: prepare PT before filling in PDE]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18645 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuHotPlugData.h that defines a data structure that is shared between
modules and is required for to support hot plug CPUs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18643 6f19259b-4bc3-4df7-8a09-765794883524
Add AcpuCpuData.h that defines a data structure that is shared between
modules and is required for ACPI S3 support.
APState field removed between V1 and V2 patch.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18642 6f19259b-4bc3-4df7-8a09-765794883524
Add SmramSaveStateMap.h file that defines the 32-bit and 64-bit CPU
SMRAM Save State Map.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18641 6f19259b-4bc3-4df7-8a09-765794883524
Add definition of the SMM CPU Service Protocol that is produced by
the PiSmmCpuDxeSmm module.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18640 6f19259b-4bc3-4df7-8a09-765794883524
Add SmmCpuPlatformHookLib that provides platform specific functions
that are used to initialize SMM and process SMIs. A Null instance
of this library is provided that should work for most platforms.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18639 6f19259b-4bc3-4df7-8a09-765794883524
Add SmmCpuFeaturesLib that provides CPU specific functions that are
used to initialize SMM and process SMIs. A functional implementation
of this library class is provided that is based on the
Intel(R) 64 and IA-32 Architectures Software Developer's Manual
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18638 6f19259b-4bc3-4df7-8a09-765794883524
Add declaration of PlatformSecLib library class to DEC file
Add declaration of PcdPeiTemporaryRamStackSize PCD to DEC/UNI file
Add build of PlatformSecLibNull to DSC file
Add build of SecCore to DSC file
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18637 6f19259b-4bc3-4df7-8a09-765794883524
Add SecCore module that uses the PlatformSecLib class for platform
specific actions. The SecCore module also uses a new PCD to
configure the size of the stack used in the SEC phase. If the
stack size PCD is set to 0, the stack is configured to use half
of the available temporary RAM.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18636 6f19259b-4bc3-4df7-8a09-765794883524
Add PlatformSecLib class and PlatformSecLibNull instance
that is used by the SecCore. PlatformSecLibNull should
not be used in a platform build. Instead, it should be
used as a template for implementing a platform specific
instance of the PlatformSecLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18635 6f19259b-4bc3-4df7-8a09-765794883524
Add modules that produce the SMM Communications PPI and
install a SW SMI handler for SMM Communication requests
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18634 6f19259b-4bc3-4df7-8a09-765794883524
Move CPUID related defines from LocalApic.h to Cpuid.h
Update LocalApicLib instances to include Cpuid.h
Update CpuMpPei module to include Cpuid.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18633 6f19259b-4bc3-4df7-8a09-765794883524
The Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuArchDxe
driver applies any MTRR changes to APs, if the
EFI_MP_SERVICES_PROTOCOL is available. We should do the same.
Additionally, the broadcast should occur at MP startup as well,
not only when MTRR settings are changed. The inspiration is
taken from
Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuMpDxe/
(see the EarlyMpInit() function and its call sites in
"ProcessorConfig.c").
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18632 6f19259b-4bc3-4df7-8a09-765794883524
Address a race condition in first call to StartupAllAPs() with
SingleThread set to TRUE in the MP initialization. If the APs
have not entered their idle loop before StartupAllAPs() is called,
then some of the APs will be in an unexpected state, and
StartupAllAPs() will hang. This is the hang condition that is
only seen when SingleThread parameter is set to TRUE and
StartupAllAPs() is called very shortly after mAPsAlreadyInitFinished
is set to TRUE that releases the APs to complete their initialization.
An internal function has been added to check if all APs are in the
sleeping state in their idle loop. On the first call to
StartupAllAPs(), this internal function is used in a loop to make
sure the APs are in a state that is compatible with the use of
StartupAllAPs(). PcdCpuApInitTimeOutInMicroSeconds is used as the
maximum wait time for the APs to enter their idle loop. If all
APs have not entered their idle loop within the timeout, then
an ASSERT() is generated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18631 6f19259b-4bc3-4df7-8a09-765794883524
Use PcdCpuApInitTimeOutInMicroSeconds instead of hardcoded 100ms for
the time to wait for all APs to respond to first INIT SIPI SIPI
wake request.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18630 6f19259b-4bc3-4df7-8a09-765794883524
Only perform AP detection if PcdCpuMaxLogicalProcessorNumber > 1
Only free AP related structures of they were allocated
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18629 6f19259b-4bc3-4df7-8a09-765794883524
Add an ASSERT in GetApicTimerState() to check if the local APIC is
software enabled.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18595 6f19259b-4bc3-4df7-8a09-765794883524
When the local APIC is not configurated properly, function
GetApicTimerInitCount() in LocalApicLib may return zero, which will lead
to a divide by zero exception in SecPeiDxeTimerLibUefiCpu.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18594 6f19259b-4bc3-4df7-8a09-765794883524
CpuData buffer should be located in allocated buffer instead of at end of
WakeupBuffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18550 6f19259b-4bc3-4df7-8a09-765794883524
Per IA32 SDM, if CPUID.80000008H is not available, software may assume that the
processor supports a 36-bit physical address size.
However, for such old processors (For example, Quark processor),
MtrrValidBitsMask and MtrrValidAddressMask values are reverted and wrong in
MtrrLib. MtrrValidBitsMask should be 0xFFFFFFFFFULL and MtrrValidAddressMask
should be 0xFFFFFF000ULL.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18396 6f19259b-4bc3-4df7-8a09-765794883524
CPU Healthy state maybe changed by software. We should return Healthy state
from Healthy bit instead of from CPU BIST hardware information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18374 6f19259b-4bc3-4df7-8a09-765794883524
when stack NX has been enabled for BSP.
DxeIpl may have enabled Execute Disable for BSP,
APs need to get the status and sync up the settings,
otherwise EFI_MP_SERVICES_PROTOCOL->StartupAllAPs
may not work.
Got positive comments and test result from Laszlo
for the early draft patch, thanks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18191 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuMpEndOfPeiCallback () to restore wakeup buffer data on S3 path and flag
flag wakeup buffer to be un-used type on normal boot path. Set one EndOfPei
flag save/restore wakeup buffer when wakeup APs every time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18014 6f19259b-4bc3-4df7-8a09-765794883524
Add AsmHltLoop () in assembly code, it will not be copied into AP wakeup
buffer and invoked at end of ApCFunction (). To make sure AP work in case
AP wakeup buffer is restored to original data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18013 6f19259b-4bc3-4df7-8a09-765794883524
Get CPU BIST information from SEC Platform Information(2) PPIs and update them
accordingly. Install(Reinstall) SEC Platform Information2 PPI to published the
new CPU BIST.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18004 6f19259b-4bc3-4df7-8a09-765794883524
Add DetectMicrocode() to load microcode on BSP and APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18002 6f19259b-4bc3-4df7-8a09-765794883524
Add PCDs PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize that
are used to detect microcode patch from microcode region.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18000 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Ruiyu Ni
Hao Wu
Laszlo Ersek
Liming Gao
Giri P Mudusuru
Star Zeng
Marvin H?user
Michael Kinney
Ard Biesheuvel
Jordan Justen
Yao, Jiewen
Qiu Shumin