The GIC CPU Id (the GIC CPU interface the CPU is connected to) can be retrieved by reading the first
registers of the GIC CPU Target Registers.
The first GIC Distributor Target registers correspond to the SGIs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14479 6f19259b-4bc3-4df7-8a09-765794883524
- Registering a interrupt handler implicitly enables said interrupt. This
is in the UEFI Spec. No need to enable the interrupts a second time.
- Make sure the Timer is completely disabled before configuring it. Only
enable after configuration is complete.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14433 6f19259b-4bc3-4df7-8a09-765794883524
Checking if a core if the primary/boot core used to be done with the macro
IS_PRIMARY_CORE().
Some platforms exposes configuration registers to change the primary core.
Replacing the macro IS_PRIMARY_CORE() by ArmPlatformIsPrimaryCore() allows
some flexibility in the way to check the primary core.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ryan Harkin <ryan.harkin@linaro.org>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14344 6f19259b-4bc3-4df7-8a09-765794883524
If we have a pending spurious interrupt we should not try to clear it,
just ignore.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14265 6f19259b-4bc3-4df7-8a09-765794883524
This constant allows to reduce architecture difference in the position
of the IRQ in the exception table.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14099 6f19259b-4bc3-4df7-8a09-765794883524
The function 'ArmGicAcknowledgeSgiFrom' was actually acknowledging Interrupts (and not only SGIs).
ArmPkg/ArmGicLib: Introduced the PCD PcdGicPrimaryCoreId
This PCD defines the Id of the primary core in the GIC.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13259 6f19259b-4bc3-4df7-8a09-765794883524
Previsouly the synchronization of MpCore was using the SGI (Software
Generated Interrupt) to synchronize MpCore during the early boot.
This commit replaced this mechanism by the more appropriate SEV/WFE
instructions (Send/Wait Event instructions).
That also eases the port to a new cpu/platform.
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13249 6f19259b-4bc3-4df7-8a09-765794883524
The GICD_IGROUPR0 is banked for each connected processor. It means the
Non-Secure bits for the PPIs (Private Peripheral Interrupts) must be
configured for every processor.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13135 6f19259b-4bc3-4df7-8a09-765794883524
Changed ARM CPU SetMemoryAttributes to always use strongly ordered for the EFI_MEMORY_UC attribute.
Signed-off-by:
Reviewed-by: eugenecohen
Reviewed-by: yanivtal
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13011 6f19259b-4bc3-4df7-8a09-765794883524
This library is the interface for the ARM Generic Interrupt Controller
Architecture Specification.
ARM Platform can use any GIC controller (not necessary PL390 GIC).
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12411 6f19259b-4bc3-4df7-8a09-765794883524
The PcdStandalone is a PCD ARM Ltd uses to make the difference between a standalone UEFI (boot
from cold boot to Boot Manager without user intervention) and a Debug UEFI firmware (the firmware
engineer has to copy the Normale World image into the DRAM to enable his/her firmware).
By coping the firmware into DRAM in the non standalone version it is much faster than reflashing
the NOR Flash after each build.
ArmPlatformSecExtraAction() function is called just before the Sec module jump to normal world.
The platform firmware can run extra actions at this stage.
The 'ARM Standalone' concept has moved to the implementation of ArmPlatformSecExtraAction() for
the ARM development boards (in ArmPlatformPkg/Library/DebugSecExtraActionLib).
ArmPlatformPkg: Enable DebugAgentLib in Sec and PrePeiCore
ArmPlatformPkg: Fix line endings in some source files
Use CR+LF line endings as defined by the EDK2 coding convention
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11991 6f19259b-4bc3-4df7-8a09-765794883524
If a FDT blob is passed to the kernel it is required we can load it.
If we fail to load the binary then we must abort the Linux booting
process.
ArmPkg/CpuDxe: Ensure the reset vector passed to the CP15 VBAR register is aligned on the right boundary
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11968 6f19259b-4bc3-4df7-8a09-765794883524
The idea is to keep ArmPkg responsible for the ARM architectural modules and ArmPlatformPkg
the ARM development platform packages (with their respective drivers).
ArmPlatformPkg: Reduce driver dependency on ArmPlatform.h
- Move some driver definitions from C-Macro to PCD values
- Unify PCD driver namespace
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11956 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin
Harry Liebel
oliviermartin