Get CPU BIST information from gEfiSecPlatformInformation2PpiGuid or
gEfiSecPlatformInformationPpiGuid Guided HOB and update the CPU healthy status
for CPU MP Service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17641 6f19259b-4bc3-4df7-8a09-765794883524
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17221 6f19259b-4bc3-4df7-8a09-765794883524
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17217 6f19259b-4bc3-4df7-8a09-765794883524
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17216 6f19259b-4bc3-4df7-8a09-765794883524
The DDK3790 tool chain fails when the PAUSE instruction is assembled:
error A2085: instruction or register not accepted in current CPU mode The solution is to use the .686 directive along with the .xmm directive.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17134 6f19259b-4bc3-4df7-8a09-765794883524
For avoid the compiler optimizing the code, we let Parameter and Procedure in CpuData volatile.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17024 6f19259b-4bc3-4df7-8a09-765794883524
Add a new sleeping state for APs, when no procedure execution, put AP to sleep. when need to execute
procedure, only need to wake up this AP by sent SIPI.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17023 6f19259b-4bc3-4df7-8a09-765794883524
Use the example.com domain as recommended in RFC 2606.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Bruce Cran <bruce.cran@gmail.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16724 6f19259b-4bc3-4df7-8a09-765794883524
Make code consistence between ASM and S files.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16530 6f19259b-4bc3-4df7-8a09-765794883524
when gBS->ExitBootServices() is called, the APs should avoid to access
the unsafed buff datas which were allocated by boot services.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16397 6f19259b-4bc3-4df7-8a09-765794883524
This sequence should happen:
* CpuMp.c: Allocate a stack for the APs
* ApStartup.c: Send Start IPI to wake APs in 16-bit real mode
* MpAsm.S: AP enters CpuDxe driver code without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16370 6f19259b-4bc3-4df7-8a09-765794883524
If timeout expires before AP returns from Procedure, the AP should
be terminated, we introduce ResetApStackLess() to send init IPI
to let AP exit Procedurce and re-available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16366 6f19259b-4bc3-4df7-8a09-765794883524
Due to the implementation of AcquireSpinLock() is not MP safe,
so we should use AcquireSpinLockOrFail directly instead.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16357 6f19259b-4bc3-4df7-8a09-765794883524
All APs use the same common stack to initialization. after
initialization, APs should switch to the stack of its own.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16351 6f19259b-4bc3-4df7-8a09-765794883524
introduce PCD value: PcdCpuMaxLogicalProcessorNumber and PcdCpuApStackSize,
used for initialize APs stacks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16350 6f19259b-4bc3-4df7-8a09-765794883524
This routine starts the APs and directs them to run the specified
code.
The specified code is entered without a stack being available.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16349 6f19259b-4bc3-4df7-8a09-765794883524
We'll want to use the structures for AP startup.
Note: It seems previously we were not using '#pragma pack ()' in
CpuGdt.c.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16348 6f19259b-4bc3-4df7-8a09-765794883524
The AP startup code simply jumps into this code with the CpuDxe driver
without setting up a stack for the processor.
Therefore, this code must setup the stack before calling into C code.
This is the basic flow:
* AP enters CpuDxe driver code (AsmApEntryPoint) without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
- If ApEntryPointInC returns, the lock is freed, and another AP may
run
- The AP C code may call AsmApDoneWithCommonStack to indicate that
the AP is no longer using the stack, and another may therefore
proceed to use the stack and then call ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16347 6f19259b-4bc3-4df7-8a09-765794883524
This is the function the AP assembly code will expect to call after
getting a lock and setting up the stack.
Only one AP will enter this routine at a time.
If ApEntryPointInC exits, then the assembly code will loop around to
grab the lock, setup the stack, and call ApEntryPointInC again.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16346 6f19259b-4bc3-4df7-8a09-765794883524
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16345 6f19259b-4bc3-4df7-8a09-765794883524
Update to show what the patch looks like in email form.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16297 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16100 6f19259b-4bc3-4df7-8a09-765794883524
.S assembler files must be AT&T syntax ones. So Intel syntax mnemonic is not good. Discovered by clang integrated assembler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16098 6f19259b-4bc3-4df7-8a09-765794883524
CpuExceptionHandlerLib has code that contains absolute relocations, not supported by
Xcode for X64, and it then copies this code to an alternate location in memory. It is
very hard to write IP relative self-modifiying code. I had to update AsmVectorNumFixup()
to also patch in the absolute addressess after the code was copied.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Anderw Fish <afish@apple.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16068 6f19259b-4bc3-4df7-8a09-765794883524
Module UNI and Package UNI files are not DOS format. Convert them to DOS format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16047 6f19259b-4bc3-4df7-8a09-765794883524
5. Add PACKAGE_UNI_FILE UNI file that contains the localized Abstract and Description of a package and localized strings associated with PCDs.
a. Addresses an information gap between DEC files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume PACKAGE_UNI_FILE and associated UNI file during UDP creation that performs the DEC -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce PACKAGE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> DEC conversion.
6. Add Package Extra UNI file that provides the localized Name of a package.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a package to specify extra files to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a package to go along with the localized Abstract and Description from the PACKAGE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15936 6f19259b-4bc3-4df7-8a09-765794883524
4. PCD information in DEC file comment blocks are either incomplete or incorrect.
This includes detailed description, @Prompt, @ValidRange, @ValidList, @Expression, and [Error.<TokenSpaceGuid>] validation error messages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15935 6f19259b-4bc3-4df7-8a09-765794883524
2. Add MODULE_UNI_FILE file that contains the localized Abstract and Description of a module.
a. Addresses an information gap between INF files and the UEFI Distribution Packaging Specification XML schema
b. There will be an associated update to UPT in BaseTools to consume MODULE_UNI_FILE and associated UNI file during UDP creation that performs the INF -> XML conversion.
c. There will be an associated update to UPT in BaseTools to produce MODULE_UNI_FILE and associated UNI file during UDP installation that performs the XML -> INF conversion.
3. Add Module Extra UNI file that provides the localized Name of a module.
a. [UserExtensions.TianoCore."ExtraFiles"] provides an easy method for a module to specify extra files not listed in [Sources] or [Binaries] sections to be added to a UDP without having to list the files in the UPT package information data file.
b. There will be an associated update to UPT in BaseTools to package up files listed in [UserExtensions.TianoCore."ExtraFiles"] during UDP creation.
c. UNI file contains localized name of a module to go along with the localized Abstract and Description from the MODULE_UNI_FILE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15934 6f19259b-4bc3-4df7-8a09-765794883524
1. Usage information in INF file comment blocks are either incomplete or incorrect.
This includes usage information for Protocols/PPIs/GUIDs/PCDs/HOBs/Events/BootModes.
The syntax for usage information in comment blocks is defined in the EDK II Module Information (INF) Specification
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gao, Liming <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15933 6f19259b-4bc3-4df7-8a09-765794883524
We strongly prefer that contribtions be offered using the same license
as the project/module. But, we should document other acceptable
licenses for contributions.
This will allow package owners to more easily know if they can accept
a contribution under a different source license.
NOTE: This does not modify the wording of the "TianoCore Contribution
Agreement 1.0" section
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Mark Doran <mark.doran@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15892 6f19259b-4bc3-4df7-8a09-765794883524
This implements the older VTF ResetVector code often used on EDK II
IA32 & X64 platforms.
This VTF requires build time fixups in order to find the SEC entry
point. The BaseTools GenFv tool has code that patches the jump target
of the reset vector code to match the entry point of the SEC image in
the PEI Firmware Volume.
v2:
* Rename from OldVtf to FixupVtf
* Use EDK II extension of .nasmb rather than .nasmbin
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15826 6f19259b-4bc3-4df7-8a09-765794883524
Previously, we would build the page tables in
Tools/FixupForRawSection.py.
In order to let NASM build VTF0 from source during the EDK II build
process, we need to move this into the VTF0 NASM code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15822 6f19259b-4bc3-4df7-8a09-765794883524
Using NASM we build VTF0 as part of the EDK II build process.
v2:
* Use EDK II extension of .nasmb rather than .nasmbin
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15821 6f19259b-4bc3-4df7-8a09-765794883524
2. Save/restore CPU Interrupt state around sending IPI. It could avoid sending IPI be interrupted by CPU interrupt handler.
3. Add note for SetApicMode() API that must not be called from an interrupt handler or SMI handler.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Kinney, Michael <michael.d.kinney@intel.com>
Reviewed-by: Mudusuru, Giri <giri.p.mudusuru@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15652 6f19259b-4bc3-4df7-8a09-765794883524
Its default value is 10 millisecond per IA32 manual.
Platform could customize this PCD value for performance requirement.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Kinney, Michael <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15650 6f19259b-4bc3-4df7-8a09-765794883524
GetMemoryCacheTypeFromMtrrType () should return the default memory type instead of UC type for MTRR_CACHE_INVALID_TYPE.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15053 6f19259b-4bc3-4df7-8a09-765794883524
2. mEnabledInterruptNum is total enabled interrupt number, InterruptType should less than mEnabledInterruptNum.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15012 6f19259b-4bc3-4df7-8a09-765794883524
S3RestoreConfig2() can optionally stack-switch to the SMM S3 Resume Entry
Point and ask it to transfer to S3ResumeExecuteBootScript().
Similarly, S3ResumeExecuteBootScript() stack-switches explicitly to the
boot script executor, and asks it to transfer to S3ResumeBootOs().
Currently the stack pointers specified for the SMM S3 Resume Entry Point
and the boot script executor to use for returning are derived from
addresses of the first local variables in S3RestoreConfig2() and
S3ResumeExecuteBootScript(), respectively.
Since (theoretically) the stack grows down as local variables are defined
and functions are called, the idea is presumably to allow the respective
callee to overwrite the caller's local variables. (The callees in
question can never return normally, only by explicit stack switching.)
Taking the address of "Status" is less portable than optimal however.
Compilers are free to juggle local variables at build time as they
please, including order and alignment on the stack. For example, when the
code is built for 64-bit PEI with gcc-4.8.2, the address of "Status"
trips up the alignment assertion in SwitchStack().
Let's align the address of "Status" down to CPU_STACK_ALIGNMENT
explicitly. If a compiler ensures such alignment and places "Status" at
the highest address automatically, then this change has no effect.
Otherwise, we'll prepare ReturnStackPointer values that (a) are correctly
aligned, (b) preserve the same amount or more (but never less) from the
caller's local variables than before, which should be safe.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed by: Jiewen Yao <Jiewen.Yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14977 6f19259b-4bc3-4df7-8a09-765794883524
2. Updated CPU Exception Handler Library instance according to the new CPU Exception Handler Library class definitions.
3. Updated CPU Exception Handler Library instance to handle the vector attributes defined in PI 1.2.1.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14885 6f19259b-4bc3-4df7-8a09-765794883524
Now, Transition32FlatTo64Flat calls SetCr3ForPageTables64
which is located in Ia32/PageTables64.asm.
This change is required so OVMF can replace the code in
Ia32/PageTables64.asm with code that generates page tables in
RAM.
Note: Since this change does not impact the functionality of the
current VTF0 binaries, they are not being updated. The resulting
new binaries were tested to verify there is no regression.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14714 6f19259b-4bc3-4df7-8a09-765794883524
2. Read CPU APIC ID from CPUID leaf B in case CPU Init APIC ID is larger 255 in XAPIC mode.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14674 6f19259b-4bc3-4df7-8a09-765794883524
signed-off-by: Kinney, Michael D <michael.d.kinney@intel.com>
reviewed-by: Bjorge, Erik C <erik.c.bjorge@intel.com>
reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13749 6f19259b-4bc3-4df7-8a09-765794883524
2. Updated Local APIC library instances to get Local APIC base Address by invoking GetLocalApicBaseAddress() instead of by PCD PcdCpuLocalApicBaseAddress.
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Kinney Michael D <michael.d.kinney@intel.com>
Reviewed-by: Rui Sun <rui.sun@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13668 6f19259b-4bc3-4df7-8a09-765794883524
For a platform tip with 32-bit PEI+64-bit DXE, InitializeFloatingPointUnits () should be called for BSP in the DXE phase.
Signed-off-by: Sun Rui <rui.sun@intel.com>
Reviewed-by: Fan Jeff <jeff.fan@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13511 6f19259b-4bc3-4df7-8a09-765794883524
This patch enables interrupt delivery via the Local APIC as part of the initialization process.
Signed-off-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Rosenbaum, Lee G <lee.g.rosenbaum@intel.com>
Reviewed-by: Sun Rui <rui.sun@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13338 6f19259b-4bc3-4df7-8a09-765794883524
SMM S3 resume may change memory cache type for flash memory range and thus RestoreS3PageTables() in which loops are executed to create page table would have negative performance impact on S3 resume. Move the call to RestoreS3PageTables() earlier before SMM S3 resume can avoid this issue.
Signed-off-by: Sun Rui <rui.sun@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13231 6f19259b-4bc3-4df7-8a09-765794883524
Contributions.txt documents the contribution process for all
tianocore projects. The conents of Contributions.txt should
match in all cases.
License.txt is a per-project document showing the license terms
used by that project.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13187 6f19259b-4bc3-4df7-8a09-765794883524
Signed-off-by: Sun Rui <rui.sun@intel.com>
Reviewed-by: Fan Jeff <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13182 6f19259b-4bc3-4df7-8a09-765794883524
2. Updated BootScriptSaveOnS3SaveStateThunk restore IA32 IDT table before transferring to protected mode.
It could support exception handler in 32-bit Framework Boot Script code.
Signed-off-by: vanjeff
Reviewed-by: jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13099 6f19259b-4bc3-4df7-8a09-765794883524
2. Invoke MtrrGetDefaultMemoryType() to get the default memory type instead of the hard code value in module.
3. Add go though for UC attributes.
Signed-off-by: vanjeff
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12587 6f19259b-4bc3-4df7-8a09-765794883524
Update Flat32SearchForSecEntryPoint assembly code to support finding an SEC image using the TE image format.
Signed-off-by: rsun3
Reviewed-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12462 6f19259b-4bc3-4df7-8a09-765794883524
When it finds that a request range is covered by an existing MTRR with same cache type, the MTRR library set a flag and continues to check other MTRRs and invalidate any MTRR of the same request range with a higher-priority cache type.
Signed-off-by: rsun3
Reviewed-by: gxing
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12388 6f19259b-4bc3-4df7-8a09-765794883524
* Rename README to ReadMe.txt
* Document that nasm 2.03 or newer is required for building VTF0
Signed-off-by: ydong10
Reviewed-by: jljusten
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12384 6f19259b-4bc3-4df7-8a09-765794883524
When the MdeModulePkg gCoreEventIdleGuid event is signaled,
CpuSleep is called. This will cause the CPU to sleep until
the next interrupt occurs.
Signed-off-by: jljusten
Reviewed-by: mdkinney
Reviewed-by: rsun3
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11842 6f19259b-4bc3-4df7-8a09-765794883524
If Attributes specifies a combination of memory attributes that cannot be set together, then EFI_INVALID_PARAMETER is returned. For example, if both EFI_MEMORY_UC and EFI_MEMORY_WT are set.
Signed-off-by: rsun3
Reviewed-by: jyao1
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11694 6f19259b-4bc3-4df7-8a09-765794883524
If DEBUG_PROPERTY_DEBUG_CODE_ENABLED is also set in PcdDebugPropertyMask, then the entire set of MTRRs will be displayed on every memory cache setting change.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11231 6f19259b-4bc3-4df7-8a09-765794883524
Use the library functions for shift operations in BaseLib for a 64-bit integer where the code is shared for 32-bit and 64-bit.
Defining bitfields in structures with > 32 bits will cause these types of issues on IA32 builds. So the largest bitfield should be type UINT32 with a max size of :32.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10983 6f19259b-4bc3-4df7-8a09-765794883524
The change in r10765 introduced an issue where inherited interrupt
handlers would override the driver's RegisterInterruptHandler
functionality.
DUET installs a IDT with 256 entries early in it's boot. Therefore,
no interrupt handlers could be installed with DUET while using
UefiCpuPkg/CpuDxe (instead of DuetPkg/CpuDxe).
This change forces the IDT to be modified when RegisterInterruptHandler
is called to ensure the UEFI handler will be installed properly.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10972 6f19259b-4bc3-4df7-8a09-765794883524
1. Remove PCDs those use the default values/types from the DEC file.
2. Remove the unused library instances.
3. Group common library instances in common [LibraryClasses] section as the default library instance for all modules.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10534 6f19259b-4bc3-4df7-8a09-765794883524
1) No API change from old version.
2) Change MACRO:
#define MTRR_NUMBER_OF_VARIABLE_MTRR 32 // the semantics are changed from NUMBER to MAX_NUMBER.
#define FIRMWARE_VARIABLE_MTRR_NUMBER 6 // wrong and deprecated
#define MTRR_LIB_IA32_VARIABLE_MTRR_END 0x20F // wrong and deprecated
#define RESERVED_FIRMWARE_VARIABLE_MTRR_NUMBER 2 // add new one.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9941 6f19259b-4bc3-4df7-8a09-765794883524
The EBX register should be preserved for the IA32 C calling convention.
The use of the CPUID instruction was modifying the EBX register, so
we push and pop EBX.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9573 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan
Michael Kinney
Scott Duplichan
Chen Fan
Jordan Justen
Shumin Qiu
Nikolai Saoukh
Anderw Fish
Gao, Liming
Tian, Hot
Laszlo Ersek
Samer El-Haj-Mahmoud
vanjeff
li-elvin
lzeng14
rsun3
jyao1
geekboy15a
hhtian
jljusten
lgao4
ydong10
mdkinney
xdu2
niruiyu
andrewfish
xli24
qhuang8
klu2
gikidy