Update APIs related to set memory attributes to handle the fixed MTRR
is not always supported.
There are 3 APIs in MtrrLib that can set memory attributes:
1. MtrrSetMemoryAttributesInMtrrSettings
2. MtrrSetMemoryAttributeInMtrrSettings
3. MtrrSetMemoryAttribute
The general idea applied in MtrrSetMemoryAttributesInMtrrSettings is:
1. MtrrLibPreMtrrChange saves the old MTRR default type which
contains bit to enable fixed MTRR.
2. Main logic in MtrrSetMemoryAttributesInMtrrSettings applies
memory attribute settings for below 1MB to variable MTRRs
if fixed MTRR is not supported.
3. MtrrLibPostMtrrChange unconditionally sets E bit in MTRR default
type MSR but only set FE bit when fixed MTRRs are modified.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestMtrrSetAllMtrrs() for the case that fixed MtrrLib
is not always supported.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update MtrrSetAllMtrrs to not access fixed MTRRs if CPU doesn't
support them.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
UnitTestMtrrGetFixedMtrr updated for the case that fixed MtrrLib
is not always supported.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
IsMtrrSupported() return true when either fixed mtrr supported or
variable mtrr suppored. In this case, rather than checking whether
MTRR is supported or not, we should specifically check for fixed MTRR
support.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestMtrrGetAllMtrrs() for the case that fixed MtrrLib
is not always supported
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The patch fixes the following issues in the original implementation:
1. MtrrSetting contains random value if MTRR is not supported.
2. Unconditionally access fixed MTRR on CPU that may not support
fixed MTRR.
3. The maximum number of Variable MTRR entries are initialized, while
the portion exceeding the maximum number remains uninitialized.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestMtrrGetDefaultMemoryType for the case the when Fixed
MTRRs are not supported.
The original implementation returns FALSE when either fixed MTRR isn't
supported or the number of variable MTRRs is 0. The correct behavior
should return FALSE only when both fixed MTRR isn't supported and the
number of variable MTRRs is 0.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Update UnitTestGetFirmwareVariableMtrrCount for the case the when
Fixed MTRRs are not supported.
The original implementation returns FALSE when either fixed MTRR isn't
supported or the number of variable MTRRs is 0. The correct behavior
should return FALSE only when both fixed MTRR isn't supported and the
number of variable MTRRs is 0.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The previous implementation returns FALSE if either fixed MTRR is
unsupported or the number of variable MTRRs is 0. The correct behavior
is to return FALSE only when both fixed MTRR is unsupported and the
number of variable MTRRs is 0.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add internal function MtrrLibIsMtrrSupported and
update IsMtrrSupported to call the new internal function.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
Current reset vector uses 0xffffffe0 as AP waking vector, and expects
GenFv generates code aligned on a 4k boundary which will jump to this
location. However, some issues are listed below
1. GenFV doesn't generate code as the comment expects, because GenFv
assumes no modifications are required to the VTF-0 'Volume Top File'.
2. Even if removing VFT0 signature and let GenFv to modify, Genfv is
hard-code using another flash address 0xffffffd0.
3. In the same patch series, AP waking vector code is removed from
GenFv, because no such usage anymore. The existing of first two issues
also approve the usage is not available for a long time.
Therefore, remove AP waking vector related code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4494
There are two part of AP waking Vector logic in SecCore.
The first one working with GenFv to find a free 4K aligned space,
use the 4K aligned address as AP waking Vector and jump to 4G-30h,
and finally jump to ApStartup..
The second one hard code uses 4G-1000h as AP waking Vector and
jump to ApStartup.
Both usages are no longer used. Remove them.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Use MpService2Ppi to wakeup AP in s3 boot flow during initializing
CPU. If mSmmS3ResumeState->MpService2Ppi is not 0, then BSP will
use MpService2Ppi->StartupAllCPUs to do CPU initialization for both
BSP and AP instead of only sending InitSipiSipi for AP.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
This commit is code logic refinement for s3 boot flow
in CpuS3.c. It doesn't change any code functionality.
This commit implementes InitializeAp and InitializeBsp
as a single function since they are doing almost the
same thing. Then both BSP and AP will execute the same
function InitializeCpuProcedure to do CPU initialization.
This can make the code logic easier to understand.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Add assert for invalid excution mode combination of 64bit PEI +
32bit DXE.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Prepare MpService2Ppi in S3Resume when PEI and SMM env run
in the same execution mode. Then smm s3 code can use Mp
Service to wakeup AP instead of only sending InitSipiSipi.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4511
With 64 bit build we are seeing the CD in control register CR 0 set.
This causes the NEM to disabled for some specific bios profiles.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Wu, Mingliang <mingliangx.wu@intel.com>
The implementation of this new behavior aligns with the guidelines
outlined in the Intel SDM.
Following a power-up or RESET of an MP system, system hardware
dynamically selects one of the processors on the system bus as the BSP.
The remaining processors are designated as APs. The APs complete a
minimal self-configuration, then wait for a startup signal (a SIPI
message) from the BSP processor.
Additionally, the MP protocol is executed only after
a power-up or RESET. If the MP protocol has completed and a
BSP is chosen, subsequent INITs (either to a specific processor or
system wide) do not cause the MP protocol to be repeated. Instead, each
logical processor examines its BSP flag (in the IA32_APIC_BASE MSR) to
determine whether it should execute the BIOS boot-strap code (if it is
the BSP) or enter a wait-for-SIPI state (if it is an AP).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add PcdFirstTimeWakeUpAPsBySipi to check if it is in the OVMF environment
and necessary to wake up APs by INIT-SIPI-SIPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add new API SendStartupIpiAllExcludingSelf(), and modify
SendInitSipiSipiAllExcludingSelf() by let it call the new API.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The purpose is to fix an issue where an exception occurs at the start
of the DXE phase by applying the following patch series on INTEL-based
systems.
UefiCpuPkg: Refactor the logic for placing APs in HltLoop.
UefiCpuPkg: Refactor the logic for placing APs in Mwait/Runloop.
UefiCpuPkg: Create MpHandOff.
UefiCpuPkg: ApWakeupFunction directly use CpuMpData.
UefiCpuPkg: Eliminate the second INIT-SIPI-SIPI sequence.
This series of patches makes changes to the way the APs are
initialized and woken up. It removes the 2nd time INIT-SIPI-SIPI and
introduces a special startup signal to wake up APs. These patches also
create a new HOB identified by the mMpHandOffGuid, which stores only the
minimum information required from the PEI phase to the DXE phase.
As a result, the original HOB (mCpuInitMpLibHobGuid) is now used only
as a global variable in the PEI phase and is no longer necessary in the
DXE phase for INTEL-based systems. The AMD SEV-ES related code
still relies on the OldCpuMpData in the DXE phase.
This patch decouple the SEV-ES functionality of assigning CpuMpData to
OldCpuMpData->NewCpuMpData from the Intel logic.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
During CpuDxe initialization, MMU will be setup with the highest
mode that HW supports.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
When both the PEI and DXE phases operate in the same execution
mode(32-bit/64-bit), the BSP send a special start-up signal during
the DXE phase to awaken the Application APs.
To eliminate the need for the INIT-SIPI-SIPI sequence at the beginning
of the DXE phase, the BSP call the SwitchApContext function to trigger
the special start-up signal. By writing the specified
StartupSignalValue to the designated StartupSignalAddress, the BSP
wakes up the APs from mwait mode. Once the APs receive the
MP_HAND_OFF_SIGNAL value, they are awakened and proceed to execute the
SwitchContextPerAp procedure. They enter another while loop,
transitioning their context from the PEI phase to the DXE phase.
The original state transitions for an AP during the procedure are as
follows:
Idle ----> Ready ----> Busy ----> Idle
[BSP] [AP] [AP]
Instead of init-sipi-sipi sequence, we make use of a
start-up signal to awaken the APs and transfer their context from
PEI to DXE. Consequently, APs, rather than the BSP, to set their state
to CpuStateReady.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
In the original design, once the APs finished executing their assembly
code and switched to executing C code, they would enter a continuous
loop within a function. In this function, they would collect CpuMpData
using the MP_CPU_EXCHANGE_INFO mechanism. However, in the updated
approach, CpuMpData can now be passed directly to the ApWakeUpFunction,
bypassing the need for MP_CPU_EXCHANGE_INFO. This modification is made
in preparation for eliminating the requirement of a second
INIT-SIPI-SIPI sequence in the DXE phase.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Initially, the purpose of the Hob was twofold: it served as a way to
transfer information from PEI to DXE. However, during the DXE phase,
only a few fields from the CPU_MP_DATA which collected in PEI phase were
needed. A new Hob was specifically created to transfer information
to the DXE phase. This new Hob contained only the essential fields
required for reuse in DXE. For instance, instead of directly including
the BspNumber in MpHandOff, the DXE phase introduced the use of
GetBspNumber() to collect the BspNumber from ApicID and CpuCount.
The SaveCpuMpData() function was updated to construct the MP_HAND_OFF
Hob. Additionally, the function introduced the MP_HAND_OFF_SIGNAL,
which solely served the purpose of awakening the APs
and transitioning their context from PEI to DXE. The
WaitLoopExecutionMode field indicated whether the bit mode of PEI
matched that of DXE. Both of them were filled only if the ApLoopMode
was not ApInHltLoop. In the case of ApInHltLoop, it remained necessary
to wake up the APs using the init-sipi-sipi sequence. This improvement
still allow INIT-SIPI-SIPI even APs are wait in Run/Mwait loop mode.
The function GetMpHandOffHob() was added to facilitate access to the
collected MpHandOff in the DXE phase. The CpuMpData in the DXE phase
was updated by gathering information from MpHandOff. Since MpHandOff
replaced the usage of OldCpuMpData and contained essential information
from the PEI phase to the DXE phase. AmdSevUpdateCpuMpData was included
to maintain the original implementation of AmdSev, ensuring that
OldCpuMpData->NewCpuMpData pointed to CpuMpData.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Refactor the logic for placing APs in
Mwait/Runloop into a separate function.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Refactor the logic for placing APs in HltLoop into a separate function.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Some features like RAS need to use processor extended information
under smm, So add code to support it
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Removes SmmCpuFeaturesReadSaveStateRegister and
SmmCpuFeaturesWirteSaveStateRegister function from
SmmCpuFeaturesLib library.
MmSaveStateLib library replaces the functionality of the above
functions.
Platform old/new need to use MmSaveStateLib library to read/write save
state registers.
Current implementation supports Intel and AMD.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Implements MmSaveStateLib library interfaces
to read and write save state
registers for Intel processor family.
Moves Intel and AMD common functionality to common area.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Implements interfaces to read and write save state
registers of AMD's processor family.
Initializes processor SMMADDR and MASK depends
on PcdSmrrEnable flag.
Program or corrects the IP once control returns from SMM.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
moves Intel-specific code to the arch-dependent file.
Other processor families might have different
implementation of these functions.
Hence, moving out of the common file.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Adds MmSaveStateLib Library class in UefiCpuPkg.dec.
Adds function declaration header file.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The timer notify function should be called with timer period, not the
value read from timer register.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Remove unnecessary function SetNotPresentPage(). We can directly
use ConvertMemoryPageAttributes to set a range to non-present.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This commit is code refinement to current smm runtime InitPaging()
page table update code. In InitPaging(), if PcdCpuSmmProfileEnable
is TRUE, use ConvertMemoryPageAttributes() API to map the range in
mProtectionMemRange to the attrbute recorded in the attribute field
of mProtectionMemRange, map the range outside mProtectionMemRange
as non-present. If PcdCpuSmmProfileEnable is FALSE, only need to
set the ranges not in mSmmCpuSmramRanges as NX.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Sort mProtectionMemRange in InitProtectedMemRange() when
ReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Sort mSmmCpuSmramRanges after get the SMRAM info in
FindSmramInfo() function.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Use GenSmmPageTable() to create both IA32 and X64 Smm S3
page table.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This commit is code refinement to current smm pagetable generation
code. Add a new GenSmmPageTable() API to create smm page table
based on the PageTableMap() API in CpuPageTableLib. Caller only
needs to specify the paging mode and the PhysicalAddressBits to map.
This function can be used to create both IA32 pae paging and X64
5level, 4level paging.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Extern mSmmShadowStackSize in PiSmmCpuDxeSmm.h and remove
extern for mSmmShadowStackSize in c files to simplify code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Clear CR0.WP before modify smm page table. Currently, there is
an assumption that smm pagetable is always RW before ReadyToLock.
However, when AMD SEV is enabled, FvbServicesSmm driver calls
MemEncryptSevClearMmioPageEncMask to clear AddressEncMask bit
in smm page table for this range:
[PcdOvmfFdBaseAddress,PcdOvmfFdBaseAddress+PcdOvmfFirmwareFdSize]
If page slpit happens in this process, new memory for smm page
table is allocated. Then the newly allocated page table memory
is marked as RO in smm page table in this FvbServicesSmm driver,
which may lead to PF if smm code doesn't clear CR0.WP before
modify smm page table when ReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Add two functions to disable/enable CR0.WP. These two unctions
will also be used in later commits. This commit doesn't change any
functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In PiSmmCpuDxeSmm code, SetMemMapAttributes() marks memory ranges
in SmmMemoryAttributesTable to RO/NX. There may exist non-present
range in these memory ranges. Set other attributes for a non-present
range is not permitted in CpuPageTableMapLib. So add code to handle
this case. Only map the present ranges in SmmMemoryAttributesTable
to RO or NX.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In ConvertMemoryPageAttributes() function, when clear RP for a
specific range [BaseAddress, BaseAddress + Length], it means to
set the present bit to 1 and assign default value for other
attributes in page table. The default attributes for the input
specific range are NX disabled and ReadOnly. If there is existing
present range in [BaseAddress, BaseAddress + Length] and the
attributes are not NX disabled or not ReadOnly, then output the
DEBUG message to indicate that the NX and ReadOnly attributes of
the existing present range are modified in the function.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Simplify the ConvertMemoryPageAttributes API to convert paging
attribute by CpuPageTableLib. In the new API, it calls
PageTableMap() to update the page attributes of a memory range.
With the PageTableMap() API in CpuPageTableLib, we can remove
the complicated page table manipulating code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Because it's simpler for a platform to include the ResetVector source
and having pre-built binaries add burdens of updating the pre-built
binaries. This patch removes the pre-built binaries and the script
that buids the pre-built binaries.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
ResetVector assembly implementation puts "ALIGN 16" in the end
to guarantee the final executable file size is multiple of 16 bytes.
Because the module uses a special GUID which guarantees it's put in
the very end of a FV, which should be also the end of the FD.
All of these (file size is multiple of 16B, and the module is put at
end of FV, FV is put at end of FD) guarantee the "JMP xxx" instruction
is at FFFF_FFF0h.
This patch updates INF file and ReadMe.txt to add guidance of FDF ffs
rule for the ResetVector.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Since ResetVector source module shares the same GUID as the binary
module, the binary INF file is just removed from DSC.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
When a platform has lots of CPU cores/threads, perf-logging on every
AP produces lots of records. When this multiplies with number of SMIs
during post, the records are even more.
So, this patch adds a new PCD PcdSmmApPerfLogEnable (default TRUE)
to allow platform to turn off perf-logging on APs.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MP procedures are those procedures that run in every CPU thread.
The EDKII perf infra is not MP safe so it doesn't support to be called
from those MP procedures.
The patch adds SMM MP perf-logging support in SmmMpPerf.c.
The following procedures are perf-logged:
* SmmInitHandler
* SmmCpuFeaturesRendezvousEntry
* PlatformValidSmi
* SmmCpuFeaturesRendezvousExit
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The timer compare register is 64-bit so simplifying the delay
function.
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4424
In Relaxed-AP Sync Mode, BSP will not wait for all Aps arrive. However,
PerformRemainingTasks() needs to wait all Aps arrive before calling
SetMemMapAttributes and ConfigSmmCodeAccessCheck() when mSmmReadyToLock
is true. In SetMemMapAttributes(), SmmSetMemoryAttributesEx() will call
FlushTlbForAll() that need to start up the aps. So it need to let all
aps arrive. Same as SetMemMapAttributes(), ConfigSmmCodeAccessCheck()
also will start up the aps.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4431
In Ap relaxed mode, some SMI handlers should call SmmWaitForApArrival() to let all ap arrive in SmmCpuRendezvous(). But in traditional mode, these SMI handlers don't need to call SmmWaitForApArrival() again. So it need to be check cpu sync mode before calling SmmWaitForApArrival().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Some security features depend on the page table enabling. So, This
patch is to enable paging if it is not enabled (32bit mode)"
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Background:
For arch X64, system will enable the page table in SPI to cover 0-512G
range via CR4.PAE & MSR.LME & CR0.PG & CR3 setting (see ResetVector code).
Existing code doesn't cover the higher address access above 512G before
memory-discovered callback. That will be potential problem if system
access the higher address after the transition from temporary RAM to
permanent MEM RAM.
Solution:
This patch is to migrate page table to permanent memory to map entire physical
address space if CR0.PG is set during temporary RAM Done.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add a macro USE_5_LEVEL_PAGE_TABLE to determine whether to create
5 level page table.
If macro USE_5_LEVEL_PAGE_TABLE is defined, PML5Table is created
at (4G-12K), while PML4Table is at (4G-16K). In runtime check, if
5level paging is supported, use PML5Table, otherwise, use PML4Table.
If macro USE_5_LEVEL_PAGE_TABLE is not defined, to save space, 5level
paging is not created, and 4level paging is at (4G-12K) and be used.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
In ResetVector, if create page table, its highest address is fixed
because after page table, code layout is fixed(4K for normal code,
and another 4K only contains reset vector code).
Today's implementation organizes the page table as following if 1G
page table is used:
4G-16K: PML4 page (PML4[0] points to 4G-12K)
4G-12K: PDP page
CR3 is set to 4G-16K
When 2M page table is used, the layout is as following:
4G-32K: PML4 page (PML4[0] points to 4G-28K)
4G-28K: PDP page (PDP entries point to PD pages)
4G-24K: PD page mapping 0-1G
4G-20K: PD page mapping 1-2G
4G-16K: PD page mapping 2-3G
4G-12K: PD page mapping 3-4G
CR3 is set to 4G-32K
CR3 doesn't point to a fixed location which is a bit hard to debug at
runtime.
The new page table layout will always put PML4 in highest address
When 1G page table is used, the layout is as following:
4G-16K: PDP page
4G-12K: PML4 page (PML4[0] points to 4G-16K)
When 2M page table is used, the layout is as following:
4G-32K: PD page mapping 0-1G
4G-28K: PD page mapping 1-2G
4G-24K: PD page mapping 2-3G
4G-20K: PD page mapping 3-4G
4G-16K: PDP page (PDP entries point to PD pages)
4G-12K: PML4 page (PML4[0] points to 4G-16K)
CR3 is always set to 4G-12K
So, this patch can improve debuggability by make sure the init
CR3 pointing to a fixed address(4G-12K).
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Combine PageTables1G.asm and PageTables2M.asm to reuse code.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently, page table creation has many hard-code values about the
offset to the start of page table. To simplify it, add Labels such
as Pml4, Pdp and Pd, so that we can remove many hard-code values
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This patch only renames macro, with no code logic impacted.
Two purpose to rename macro:
1. Align some macro name in PageTables1G.asm and PageTables2M.asm, so
that these two files can be easily combined later.
2. Some Macro names such as PDP are not accurate, since 4 level page
entry also uses this macro. PAGE_NLE (no leaf entry) is better
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Update ProcTrace feature code to support enable collect performance
data by generating CYC and TSC packets. Add a new dynamic
PCD to indicate if enable performance collecting. In ProcTrace.c
code, if this new PCD is true, after check cpuid, CYC and TSC
packets will be generated by setting the corresponding MSR bits
feilds if supported.
Bugzila: https://bugzilla.tianocore.org/show_bug.cgi?id=4423
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Xiao X Chen <xiao.x.chen@intel.com>
Update code to support enable ProcTrace only on BSP. Add a new
dynamic PCD to indicate if enable ProcTrace only on BSP. In
ProcTrace.c code, if this new PCD is true, only allocate buffer
and set CtrlReg.Bits.TraceEn to 1 for BSP.
Bugzila: https://bugzilla.tianocore.org/show_bug.cgi?id=4423
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Xiao X Chen <xiao.x.chen@intel.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib and all modules
are updated to not depend on this library, remove it completely.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
UefiCpuPkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
The CPU exception handler library code was rewritten at some point to
populate the vector code templates with absolute references at runtime,
given that the XCODE linker does not permit absolute references in
executable code when creating PIE executables.
This is rather unfortunate, as this prevents us from using strict
permissions on the memory mappings, given that the .text section needs
to be writable at runtime for this arrangement to work.
So let's make this hack XCODE-only, by setting a preprocessor #define
from the command line when using the XCODE toolchain, and only including
the runtime fixup code when the macro is defined.
While at it, rename the Xcode5ExceptionHandlerAsm.nasm source file and
drop the Xcode5 prefix: this code is used by other toolchains too.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The PEI flavor of CpuExceptionHandlerLib never populates more than 32
IDT vectors, and there is no CET shadow stack support in the PEI phase.
So there is no need to use the generic ExceptionHandler NASM source,
which carries a 256-entry template and CET support, and writes to its
own .text section when built using XCODE, which is not permitted in the
PEI phase. So let's switch to the reduced SEC/PEI version of this
component, which is sufficient for PEI and doesn't suffer from the same
issue.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Currently, we use the non-Xcode5 version of ExceptionHandlerAsm.nasm
only for the SEC and PEI phases, and this version was not compatible
with the XCODE or LLD linkers, which do not permit absolute relocations
in read-only sections.
Given that SEC and PEI code typically executes in place from flash and
does not use page alignment for sections, we can simply emit the code
carrying the absolute symbol references into the .data segment instead.
This works around the linker's objections, and the resulting image will
be mapped executable in its entirety anyway. Since this is only needed
for XCODE, let's make this change conditionally using a preprocessor
macro.
Let's rename the .nasm file to reflect the fact that is used for the
SecPei flavor of this library only, and while at it, remove some
unnecessary absolute references.
Also update the Xcode specific version of this library, and use this
source file instead. This is necesessary, as the Xcode specific version
modifies its own code at runtime, which is not permitted in SEC or PEI.
Note that this also removes CET support from the Xcode5 specific build
of the SEC/PEI version of this library, but this is not needed this
early in any case, and this aligns it with other toolchains, which use
this version of the library, which does not have CET support either.
1. Change for non-XCODE SecPeiCpuExceptionHandlerLib:
. Use SecPeiExceptionHandlerAsm.nasm (renamed from
ExceptionHandlerAsm.nasm)
. Removed some unnecessary absolute references
(32 IDT stubs are still in .text.)
2. Change for XCODE SecPeiCpuExceptionHandlerLib:
. Use SecPeiExceptionHandlerAsm.nasm instead of
Xcode5ExceptionHandlerAsm.nasm
. CET logic is not in SecPeiExceptionHandlerAsm.nasm (but aligns to
non-XCODE lib instance)
. Fixed a bug that does runtime fixup in TEXT section in SPI flash.
. Emitted the code carrying the absolute symbol references into the
.data which XCODE or LLD linkers allow.
. Then fixup can be done by other build tools such as GenFv if the code
runs in SPI flash, or by PE coff loader if the code is loaded to
memory.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Fixes CodeQL alerts for CWE-457:
https://cwe.mitre.org/data/definitions/457.html
Cc: Eric Dong <eric.dong@intel.com>
Cc: Erich McMillan <emcmillan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Erich McMillan <emcmillan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Drop MtrrLibIsPowerOfTwo function, use the new IS_POW2() macro instead.
The ASSERT() removed (inside MtrrLibIsPowerOfTwo) is superfluous,
another ASSERT() a few lines up in MtrrLibCalculateMtrrs() already
guarantees that Length can not be zero at this point.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4353
Due to AMD erratum #1467, an SEV-SNP VMSA should not be 2MB aligned. To
work around this issue, allocate two pages instead of one. Because of the
way that page allocation is implemented, always try to use the second
page. If the second page is not 2MB aligned, free the first page and use
the second page. If the second page is 2MB aligned, free the second page
and use the first page. Freeing in this way reduces holes in the memory
map.
Fixes: 06544455d0 ("UefiCpuPkg/MpInitLib: Use SEV-SNP AP Creation ...")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=4353
When parking the APs on exiting from UEFI, a new page allocation is made.
This allocation, however, does not end up being marked reserved in the
memory map supplied to the OS. To avoid this, re-use the VMSA by clearing
the VMSA RMP flag, updating the page contents and re-setting the VMSA RMP
flag.
Fixes: 06544455d0 ("UefiCpuPkg/MpInitLib: Use SEV-SNP AP Creation ...")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ray Ni <ray.ni@intel.com>
BufferPages is UINTN, so we need "%Lu" when printing it to avoid
it being truncated. Also cast to UINT64 to make sure it works
for 32bit builds too.
Fixes: 4f441d024b ("UefiCpuPkg/PiSmmCpuDxeSmm: fix error handling")
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When TME-MK is enabled, the MtrrLib should substract the TME-MK
reserved bits from the max PA returned from CPUID instruction.
The new test case guarantees such behavior in MtrrLib.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ahmad Anadani <ahmad.anadani@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
CPUID enumeration of MAX_PA is unaffected by TME-MK activation and
will continue to report the maximum physical address bits available
for software to use, irrespective of the number of KeyID bits.
So, we need to check if TME is enabled and adjust the PA size
accordingly.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ahmad Anadani <ahmad.anadani@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The patch does not change any code behavior but only refactors by:
* replaces the hardcode 0x80000000 with CPUID_EXTENDED_FUNCTION
* replaces the hardcode 0x80000008 with CPUID_VIR_PHY_ADDRESS_SIZE
* replace "UINT32 Eax" with
"CPUID_VIR_PHY_ADDRESS_SIZE_EAX VirPhyAddressSize"
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ahmad Anadani <ahmad.anadani@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
CPUID enumeration of MAX_PA is unaffected by TME-MK activation and
will continue to report the maximum physical address bits available
for software to use, irrespective of the number of KeyID bits.
So, we need to check if TME is enabled and adjust the PA size
accordingly.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ahmad Anadani <ahmad.anadani@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
MtrrLib code queries the CPUID leaf 7h result if support.
Update Test code temporary to claim the CPUID only
supports max leaf as 1 so MtrrLib skips to query CPUID leaf 7h.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ahmad Anadani <ahmad.anadani@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The random test cases just run for too long that may cause timeout
in CI test.
Disable them for now.
Co-authored-by: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reduce the number of random tests. In previous patch, non-1:1
mapping is enbaled and it may need more than an hour and a half
for the CI test, which may lead to CI timeout. Reduce the number
of random test count to pass the CI.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add RandomTest for PAE paging.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Modify CpuPageTableLib code to enable PAE paging.
In PageTableMap() API:
When creating new PAE page table, after creating page table,
set all MustBeZero fields of 4 PDPTE to 0. The MustBeZero
fields are treated as RW and other attributes by the common
map logic. So they might be set to 1.
When updating exsiting PAE page table, the special steps are:
1.Prepare 4K-aligned 32bytes memory in stack for 4 temp PDPTE.
2.Copy original 4 PDPTE to the 4 temp PDPTE and set the RW,
UserSupervisor to 1 and set Nx of 4 temp PDPTE to 0.
4.After updating the page table, set the MustBeZero fields of
4 temp PDPTE to 0.
5.Copy the temp PDPTE to original PDPTE.
In PageTableParse() API, also create 4 temp PDPTE in stack.
Copy original 4 PDPTE to the 4 temp PDPTE. Then set the RW,
UserSupervisor to 1 and set Nx of 4 temp PDPTE to 0. Finally
use the address of temp PDPTE as the page table address.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Combine 'if' condition branch for non-present and leaf Parent
Entry in PageTableLibMapInLevel. Most steps of these two condition
are the same. This commit doesn't change any functionality.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add code to compare ParentPagingEntry Attribute&Mask and input
Attribute&Mask to decide if new next level page table is needed
in non-present ParentPagingEntry condition. This can help avoid
unneccessary page table creation.
For example, there is a page table in which [0, 1G] is mapped(Lv4[0]
,Lv3[0,0], a non-leaf level4 entry and a leaf level3 entry).And we
only want to map [1G, 1G+2M] linear address still as non-present.
The expected behaviour should be nothing happens in the process.
However, previous code logic doesn't check if ParentPagingEntry
Attribute&Mask and input Attribute&Mask are the same in non-present
ParentPagingEntry condition. Then a new 4K memory is allocated for
Lv2 since 1G+2M is not 1G-aligned.
So when ParentPagingEntry is non-present, before allocate 4K memory
for next level paging, we also check if ParentPagingEntry Attribute&
Mask and input Attribute&Mask are the same.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Last commit changed the CpuPageTableLib API PageTableMap, unit
test code should also be modified.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The definition of IA32_MAP_ATTRIBUTE has 64 bits, and one of the bit
field PageTableBaseAddress is from bit 12 to bit 52. This means if the
compiler treats the 64bits value as two UINT32 value, the field
PageTableBaseAddress spans two UINT32 value. That's why when building in
NOOPT mode in IA32, the below issue is noticed:
unresolved external symbol __allshl
This patch fix the build failure by seperate field PageTableBaseAddress
into two fields, make sure no field spans two UINT32 value.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Modify RandomTest to check if parameter IsModified of
PageTableMap() correctlly indicates whether input page table
is modified or not.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Add OUTPUT IsModified parameter in PageTableMap() to indicate
if page table has been modified. With this parameter, caller
can know if need to call FlushTlb when the page table is in CR3.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Enable non-1:1 mapping in random test. In previous test, non-1:1
test will fail due to the non-1:1 mapping issue in CpuPageTableLib
and invalid Input Mask when creating new page table or mapping
not-present range. Now these issue have been fixed.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Modify RandomTest to check invalid input. When creating new page
table or updating exsiting page table:
1.If set [LinearAddress, LinearAddress+Length] to non-present, all
other attributes should not be provided.
2.If [LinearAddress, LinearAddress+Length] contain non-present range,
the Returnstatus of PageTableMap() should be InvalidParameter when:
2.1Some of attributes are not provided when mapping non-present range
to present.
2.2Set any other attribute without setting the non-present range to
Present.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Add LastMapEntry pointer to replace MapEntrys->Maps[MapsIndex]
in SingleMapEntryTest () of RandomTest.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Add an input parameter to control the probability of returning
true. Change RandomBoolean() in RandomTest from 50% chance
returning true to returning true with the percentage of input
Probability.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add manual test case to check input Mask and Attribute. The check
steps are:
1.Create Page table to cover [0, 2G]. All fields of MapMask should
be set.
2.Update Page table to set [2G - 8K,2G] from present to non-present.
All fields of MapMask except present should not be set.
3.Still set [2G - 8K, 2G] as not present, this case is permitted.
But set [2G - 8K, 2G] as RW is not permitted.
4.Update Page table to set [2G - 8K, 2G] as present and RW. All
fields of MapMask should be set.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
For different usage, check if the combination for Mask and
Attr is valid when creating or updating page table.
1.For non-present range
1.1Mask.Present is 0 but some other attributes is provided.
This case is invalid.
1.2Mask.Present is 1 and Attr.Present is 0. In this case,all
other attributes should not be provided.
1.3Mask.Present is 1 and Attr.Present is 1. In this case,all
attributes should be provided to intialize the attribute.
2.For present range
2.1Mask.Present is 1 and Attr.Present is 0.In this case, all
other attributes should not be provided.
All other usage for present range is permitted.
In the mentioned cases, 1.2 and 2.1 can be merged into 1 check.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
In function CreatePageTable(), add code to initialize MapMask to
MAX_UINT64. When creating new page table or map non-present range
to present, all attributes should be provided.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
When splitting leaf parent entry to smaller granularity, create
child page table before modifing parent entry. In previous code
logic, when splitting a leaf parent entry, parent entry will
point to a null 4k memory before child page table is created in
this 4k memory. When the page table to be modified is the page
table in CR3, if the executed CpuPageTableLib code is in the
range mapped by the modified leaf parent entry, then issue will
happen.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Clear PageSize bit(Bit7) for non-leaf entry in PageTableLibSetPnle.
This function is used to set non-leaf entry attributes so it should
make sure that the PageSize bit of the entry should be 0.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
In previous code logic, when splitting a leaf parent entry to
smaller granularity child page table, if the parent entry
Attribute&Mask(without PageTableBaseAddress field) is equal to the
input attribute&mask(without PageTableBaseAddress field), the split
process won't happen. This may lead to failure in non-1:1 mapping.
For example, there is a page table in which [0, 1G] is mapped(Lv4[0]
,Lv3[0,0], a non-leaf level4 entry and a leaf level3 entry). And we
want to remap [0, 2M] linear address range to [1G, 1G + 2M] with the
same attibute. The expected behaviour should be: split Lv3[0,0]
entry into 512 level2 entries and remap the first level2 entry to
cover [0, 2M]. But the split won't happen in previous code since
PageTableBaseAddress of input Attribute is not checked.
So, when checking if a leaf parent entry needs to be splitted, we
should also check if PageTableBaseAddress calculated by parent entry
is equal to the value caculated by input attribute.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Move some local variable initialization to the beginning of the
function. Also delete duplicated calculation for RegionLength.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add check for input Length in PageTableMap (). Return
RETURN_SUCCESS when input Length is 0.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Remove unneeded 'if' condition in CpuPageTableLib code.
The deleted code is in the code branch for present non-leaf parent
entry. So the 'if' check for (ParentPagingEntry->Pnle.Bits.Present
== 0) is always FALSE.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
For the case CPU logic index is 0, RSP points to the very top of all AP
stacks. That address is not mapped in page table.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
ASSERT() is not proper handling of allocation failures, it gets compiled
out on RELEASE builds. Print a message and enter dead loop instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
It's highly unlikely the code ever runs on processors which are
almost 30 years old. Drop the code handling them.
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=4345
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4368
This issue is caused by the commit:
ec07fd0e35
GetFirstGuidHob() should not be used after exit boot service.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib, remove the
dependency of UefiCpuLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib. This
patch merges UefiCpuPkg/UefiCpuLib to MdePkg/CpuLib.
Change-Id: Ic26f4c2614ed6bd9840f817d50e47ac1de4bd013
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4360
An incorrect format specifier is being used in a DEBUG print,
specifically, a variable of type EFI_STATUS was being printed with
the %a format specifier (pointer to an ASCII string), thus the value of
the Status variable was being treated as the address of a string,
leading to a CPU exception, when encountered this bug manifests itself
as a hang near "Ready to Boot Event", with the last DEBUG print being
"INFO: Got MicrocodePatchHob with microcode patches starting address"
followed by a CPU Exception dump.
Signed-off-by: Darbin Reyes <darbin.reyes@intel.com>
Reviewed-by: Jacob Narey <jacob.narey@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
RegisterCpuInterruptHandler did not allow setting
exception handlers for anything beyond the timer IRQ.
Beyond that, it didn't meet the spec around handling
of inputs.
RiscVSupervisorModeTrapHandler now will invoke
set handlers for both exceptions and interrupts.
Two arrays of handlers are maintained - one for exceptions
and one for interrupts.
For unhandled traps, RiscVSupervisorModeTrapHandler dumps
state using the now implemented DumpCpuContext.
For EFI_SYSTEM_CONTEXT_RISCV64, extend this with the trapped
PC address (SEPC), just like on AArch64 (ELR). This is
necessary for X86EmulatorPkg to work as it allows a trap
handler to return execution to a different place. Add
SSTATUS/STVAL as well, at least for debugging purposes. There
is no value in hiding this.
Fix nested exception handling. Handler code should not
be saving SIE (the value is saved in SSTATUS.SPIE) or
directly restored (that's done by SRET). Save and
restore the entire SSTATUS and STVAL, too.
Cc: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
The TimerDxe implementation doesn't account for the physical
time passed due to timer handler execution or (perhaps even
more importantly) time spent with interrupts masked.
Other implementations (e.g. like the Arm one) do. If the
timer tick is always incremented at a fixed rate, then
you can slow down UEFI's perception of time by running
long sections of code in a critical section.
Cc: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Andrei Warkentin <andrei.warkentin@intel.com>
Rename AsmRelocateApLoopStart to AsmRelocateApLoopStartAmdSev
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add the 'AsmRelocateApLoopStartGeneric' for X64 processors except 64-bit
AMD processors with SEV-ES.
Remove the unused arguments of AsmRelocateApLoopStartGeneric, updated
the stack offset.
Create PageTable for the allocated reserved memory.
Only keep 4GB limitation of memory allocation for the case APs still
need to be transferred to 32-bit mode before OS.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add the union RELOCATE_AP_LOOP_ENTRY, split the path in RelocateApLoop
into two:
1. 64-bit AMD processors with SEV-ES
2. Intel processors (32-bit or 64-bit), 32-bit AMD processors, or
64-bit AMD processors without SEV-ES.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Check if AP_SAFE_STACK_SIZE is aligned with CPU_STACK_ALIGNMENT
during build time.
No functional or structural changes.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: James Lu <james.lu@intel.com>
Cc: Gua Guo <gua.guo@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4337
This patch is to avoid configure SMBASE if SmBase relocation has been
done. If gSmmBaseHobGuid found, means SmBase info has been relocated
and recorded in the SmBase array. No need to do the relocation in
SmmCpuFeaturesInitializeProcessor().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4337
Existing SMBASE Relocation is in the PiSmmCpuDxeSmm driver, which
will relocate the SMBASE of each processor by setting the SMBASE
field in the saved state map (at offset 7EF8h) to a new value.
The RSM instruction reloads the internal SMBASE register with the
value in SMBASE field when each time it exits SMM. All subsequent
SMI requests will use the new SMBASE to find the starting address
for the SMI handler (at SMBASE + 8000h).
Due to the default SMBASE for all x86 processors is 0x30000, the
APs' 1st SMI for rebase has to be executed one by one to avoid
the processors over-writing each other's SMM Save State Area (see
existing SmmRelocateBases() function), which means the next AP has
to wait for the previous AP to finish its 1st SMI, then it can call
into its 1st SMI for rebase via Smi Ipi command, thus leading the
existing SMBASE Relocation has to be running in series. Besides, it
needs very complex code to handle the AP exit semaphore
(mRebased[Index]), which will hook return address of SMM Save State
so that semaphore code can be executed immediately after AP exits
SMM for SMBASE relocation (see existing SemaphoreHook() function).
With SMM Base Hob support, PiSmmCpuDxeSmm does not need the RSM
instruction to do the SMBASE Relocation. SMBASE Register for each
processors have already been programmed and all SMBASE address have
recorded in SMM Base Hob. So the same default SMBASE Address
(0x30000) will not be used, thus the processors over-writing each
other's SMM Save State Area will not happen in PiSmmCpuDxeSmm driver.
This way makes the first SMI init can be executed in parallel and
save boot time on multi-core system. Besides, Semaphore Hook code
logic is also not required, which will greatly simplify the SMBASE
Relocation flow.
Mainly changes as below:
* Assume the biggest possibility of tile size is 8k.
* Combine 2 SMIs (gcSmmInitTemplate & gcSmiHandlerTemplate) into one
(gcSmiHandlerTemplate), the new SMI handler needs to run to 2 paths:
one to SmmCpuFeaturesInitializeProcessor(), the other to SMM Core
Entry Point.
* Issue SMI IPI (All Excluding Self SMM IPI + BSP SMM IPI) for first
SMI init before normal SMI sources happen.
* Call SmmCpuFeaturesInitializeProcessor() in parallel.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4337
The default SMBASE for the x86 processor is 0x30000. When
SMI happens, processor runs the SMI handler at SMBASE+0x8000.
Also, the SMM save state area is within SMBASE+0x10000.
One of the SMM initialization from processor perspective is to
relocate and program the new SMBASE (in TSEG range) for each
processor. When the SMBASE relocation happens in a PEI module,
the PEI module shall produce the SMM_BASE_HOB in HOB database
which tells the PiSmmCpuDxeSmm driver (runs at a later phase)
about the new SMBASE for each processor. PiSmmCpuDxeSmm driver
installs the SMI handler at the SMM_BASE_HOB.SmBase[Index]+0x8000
for processor Index. When the HOB doesn't exist, PiSmmCpuDxeSmm
driver shall relocate and program the new SMBASE itself.
This patch adds the SMM Base HOB for any PEI module to do
the SmBase relocation ahead of PiSmmCpuDxeSmm driver and
store the relocated SmBase address in array for each
processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
This patch is to replace mIsBsp by mBspApicId check.
mIsBsp becomes the local variable (IsBsp), then it can be
checked dynamically in the function. Instead, we define the
mBspApicId, which is to record the BSP ApicId used for
compare in SmmInitHandler. With this change, SmmInitHandler
can be run in parallel during SMM init.
Note:
This patch is the per-prepared work by refining the
SmmInitHandler, then, we can do the next step to
combine 2 SMIs (gcSmmInitTemplate & gcSmiHandlerTemplate)
into one (gcSmiHandlerTemplate), the new SMI handler
will call the SmmInitHandler in parallel to do the init.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4338
No need call InitializeMpSyncData during normal boot SMI init,
because mSmmMpSyncData is NULL at that time. mSmmMpSyncData is
allocated in InitializeMpServiceData, which is invoked after
normal boot SMI init (SmmRelocateBases).
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
RISC-V register names do not follow the EDK2 formatting.
So, add it to ignore list for now.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
This is copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe
and added the RISCV_EFI_BOOT_PROTOCOL support.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
This DXE module initializes the timer interrupt handler
and installs the Arch Timer protocol.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Add the RISC-V instance of the TimerLib.
This is mostly copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVTimerLib
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
Add Cpu Exception Handler library for RISC-V. This is copied
from edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVExceptionLib
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4076
RISC-V UEFI based platforms need to support RISCV_EFI_BOOT_PROTOCOL.
Add this protocol GUID definition and the header file required.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4246
In function InitPaging, NumberOfPml5Entries is calculated by below code
NumberOfPml5Entries = (UINTN)LShiftU64 (1, SizeOfMemorySpace - 48);
If the SizeOfMemorySpace is larger than 48, NumberOfPml5Entries will be
larger than 1. However, this doesn't make sense if the hardware doesn't
support 5 level page table.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This reverts commit 73ccde8f6d since it
results in a hang of the IA32 processor and needs further clean-up.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4234
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Commit 0426115b67 ("UefiCpuPkg: Remove unused API in
SmmCpuFeaturesLib.h", 2022-12-21) removed the declaration of the function
SmmCpuFeaturesAllocatePageTableMemory() from the "SmmCpuFeaturesLib.h"
library class header.
Remove the API's (null-)implementation from UefiCpuPkg/SmmCpuFeaturesLib
as well.
Build-tested with:
build -a IA32 -a X64 -b NOOPT -p UefiCpuPkg/UefiCpuPkg.dsc -t GCC5
Cc: Eric Dong <eric.dong@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=4235
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dun Tan <dun.tan@intel.com>
When setting new page table pool to RO, only disable/enable WP when
Cr0.WP has been set to 1 to fix potential PF caused by b822be1a20
(UefiCpuPkg/PiSmmCpuDxeSmm: Introduce page table pool mechanism).
With previous code, if someone want to modify the page table and
Cr0.WP has been cleared before modify page table, Cr0.WP may be set
to 1 again since new pool may be generated during this process
Then PF fault may happens.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Simplify the code to set memory used by smm page table as RO.
Since memory used by smm page table are in PageTablePool list,
we only need to set all PageTablePool as ReadOnly in smm page
table itself. Also, we only need to flush tlb once after
setting all page table pool as Read Only.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Remove SmmCpuFeaturesAllocatePageTableMemory in this headfile.
This API is not used by PiSmmCpuDxeSmm driver any more. Also
no other files use this API.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Introduce page table pool mechanism for smm page table to simplify
page table memory management and protection. This mechanism has been
used in DxeIpl. The basic idea is to allocate a bunch of continuous
pages of memory in advance, and all future page tables consumption
will happen in those pool instead of system memory.
Since we have centralized page tables, we only need to mark all page
table pools as RO, instead of searching page table memory layer by
layer in smm page table. Once current page table pool has been used
up, another memory pool will be allocated and the new pool will also
be set as RO if current page table memory has been marked as RO.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
During the finalization of Mp initialization before booting into the OS,
depending on whether Mwait is supported or not, AsmRelocateApLoop
places Aps in MWAIT-loop or HLT-loop.
Since paging is necessary for long mode, the original implementation of
moving APs to 32-bit was to disable paging to ensure that the booting
does not crash.
The current modification creates a page table in reserved memory,
avoiding switching modes and reclaiming memory by OS. This modification
is only for 64 bit mode.
More specifically, we keep the AMD logic as the original code flow,
extract and update the Intel-related code, where the APs would stay
in 64-bit, and run in a Mwait or Hlt loop until the OS wake them up.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
AsmRelocateApLoop is replicated for future Intel Logic Extraction,
further brings AP into 64-bit, and enables paging.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=4195
1.Updated the GDT table in VTF0 to align with the one in S3Resume2Pei.
By doing so can simplify the changes to enable S3 in 64bit PEI.
2.Use SwitchStack() between PEI and SMM in S3 resume path when both
are in the same execution mode.
3.Transfer from PEI to OS waking vector by calling SwitchStack() when
both are in the same execution mode.
4.Removed the debug assertion in S3Resume.c to support 64bit PEI.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Chinni B Duggapu <chinni.b.duggapu@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
When build in DEBUG, the code asserts that 5LPage support is there
when the physical address width is larger than 48.
In a RELEASE build it will just force LA57 to 1 in CR4
even if CPUID(7).ECX[16] says it is not supported.
UefiCpuPkg: Bug fix in 5LPage handling
The hang (in the ASSERT) in DEBUG is not warranted as there are
legal configurations with CPUID(7).ECX[16](==LA57)=0
and with a physical address width of larger than 48 (like 52).
This is also supported by this code:
https://github.com/tianocore/edk2/blob/master/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c#L221
There (as long as physical address width is smaller or equal to 52)
any address width above 48 will be reduced to 48 and the
system can and will work without 5LPaging.
The forced setting of LA57 in CR4 (in the absence of LA57 in CPUID(7).ECX)
is a spec violation and should not happen.
Hence the proposed fix
a) removes the assert.
b) only returns TRUE from Is5LevelPagingNeeded if 5LPaging is actually
supported by HW.
Signed-off-by: Robert Guenzel <robert.guenzel@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4173
Due to more core count increasement, it's hard to reflect all APs
state via AP bitvector support in the register. Actually, SMM CPU
driver doesn't need to check each AP state to know all CPUs in SMI
or not, one alternative method is to check the SMM Delayed & Blocked
AP Count number:
APs in SMI + Blocked Count + Disabled Count >= All supported Aps
(code comments explained why can be > All supported Aps)
With above change, the returned value of "SmmRegSmmEnable" &
"SmmRegSmmDelayed" & "SmmRegSmmBlocked" from SmmCpuFeaturesLib
should be the AP count number within the existing CPU package.
For register that return the bitvector state, require
SmmCpuFeaturesGetSmmRegister() returns count number of all bit per
logical processor within the same package.
For register that return the AP count, require
SmmCpuFeaturesGetSmmRegister() returns the register value directly.
v3:
- Refine the coding style
v2:
- Rename "mPackageBspInfo" to "mPackageFirstThreadIndex"
- Clarify the expected value of "SmmRegSmmEnable" & "SmmRegSmmDelayed" &
"SmmRegSmmBlocked" returned from SmmCpuFeaturesLib.
- Thread: https://edk2.groups.io/g/devel/message/96722
v1:
- Thread: https://edk2.groups.io/g/devel/message/96671
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Zeng Star <star.zeng@intel.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
The code changes develop UEFI application and dynamic command for
EfiMpServiceProtocol unit tests based on current UnitTestFramework.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
Move the implementation of EfiMpServiceProtocol unit tests in a separate
function in preparation for developing the UEFI application and dynamic
command for the same unit tests.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Dun Tan <dun.tan@intel.com>
Ray Ni
YuanhaoXie
Zhiguang Liu
Dun Tan
Wu, MingliangX
Abdul Lateef Attar
Tuan Phan
Zhang, Hongbin1
Abdul Lateef Attar
Zhihao Li
Jiaxin Wu
Yu Pu
Rebecca Cran
Ard Biesheuvel
Michael Kubacki
Gerd Hoffmann
Lendacky, Thomas via groups.io
Darbin Reyes
Andrei Warkentin
Sunil V L
Laszlo Ersek
Kuo, Ted
Robert Guenzel
Jason Lou